summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2014-06-13fsp_baytrail: Fix CONFIG_ENABLE_FSP_FAST_BOOTMartin Roth
While pushing the fsp_baytrail code, it was requested that we change CONFIG_ENABLE_FAST_BOOT to CONFIG_ENABLE_FSP_FAST_BOOT. These were missed in the change. Change-Id: If8af3f90b0f5cc9154ff1d3a387f442430f42dee Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5972 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-13mainboard.c: Fix typo in appro*p*riate in commentPaul Menzel
Use the following command to fix all occurences. $ git grep -l approriate | xargs sed -i 's/approriate/appropriate/g' Change-Id: I4cbba972bb445c2407ef2e63ffb3068fc948f1c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5987 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-12bayleybay_fsp Kconfig: Remove unnecessary overridesMartin Roth
Use the default mmconf base address and fsp locations. Change-Id: Ia9116b0f0fc799592df2a10b10e086cfc88b394c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5982 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-11AMD/CIMx: Add functions for AMD PCI IRQ routingMike Loptien
The PCI_INTR table is an Index/Data pair of I/O ports 0xC00 and 0xC01. This table is responsible for physically routing IRQs to the PIC and IOAPIC. The settings given in this table are chipset and mainboard dependent, so the table values will reside in the mainboard.c file. This allows for a system to uniquely set its IRQ routing. The function to write the PCI_INTR table resides in cimx_util.c because the indices into the table have the same definitions for all SBx00 FCH chipsets. The next piece is a function that will read the PCI_INTR table and program the INT_LINE and INT_PIN registers in PCI config space appropriately. This function will read a devices' INT_PIN register, which is always hardcoded to a value if it uses hardware interrupts. It then uses this value, along with the device and function numbers to determine an index into the PCI_INTR table. It will read the table and program the corresponding value into the PCI config space register 0x3C, INT_LINE. Finally, it will set this IRQ number to LEVEL_TRIGGERED on the PIC because it is a PCI device interrupt and the must be level triggered. For example, the SB800 USB EHCI device 0:18.2 has an INT_PIN value hardcoded to 2. This corresponds to PIN B. On the Persimmon mainboard, I want the USB device to use IRQ 11. I will program the PCI_INTR table at index 0x31 (this USB device index) to 11. This function will then read the INT_PIN register, read the PCI_INTR table, and then program the INT_LINE register with the value it read. It will then set the IRQ on the PIC to LEVEL_TRIGGERED by writing a 1 to I/O port 0x4D1 at bit position 4. Also, the SB700 has slightly different register definitions than the newer SB800 and SB900 so it needs its own set of #defines for the pci_intr registers. Only the Persimmon mainboard is adapted to this change as an example for other mainboards. Change-Id: I6de858289a17fa1e1abacf6328ea5099be74b1d6 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/5877 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-11lippert/toucan-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume is expected to work now, however the 3s delay and flash wear is still there. Change-Id: I7edbce7bcf9c2160099fd5e371562b1ec63d45d8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5971 Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-06-11lippert/frontrunner-af: Fix comment on HAVE_ACPI_RESUMEKyösti Mälkki
S3 resume now works, however the 3s delay and flash wear is still there. Change-Id: I9d2eda5454baf7704807cf67f3aca94a67de3406 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
2014-06-06AGESA: Use common heap allocatorKyösti Mälkki
Change-Id: I5df1f0efdef2592b762fe391edaadbca4593e85a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5689 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA: Use common GetBiosCallout()Kyösti Mälkki
Change-Id: I9c8f7cc98c65102486e17ec49fa2246211dffc4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use shared default calloutsKyösti Mälkki
Change-Id: Ibbb07ef308c7e92a8a8dfe066f5e3866d5f8aee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5687 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06AGESA fam15tn fam16kb: Use common handler for GNB_GFX_GET_VBIOS_IMAGEKyösti Mälkki
Change-Id: I158993bcb654ef27a9fc6b7e9dc3fc955fb740fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5686 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-06Drop unused change_i2c_mux()Kyösti Mälkki
Change-Id: I3ac39441746d739ac19e831bb67c76405c24ba27 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5925 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-06superio/smsc/kbc1100: Virtually rewrite support and fix mainboardsEdward O'Callaghan
1. Remove #include .c in romstage. 2. Make romstage component symbols linker-time. 3. Provide header guards and prototypes in superio romstage support. 4. Correct function type-signatures to be static/non-static where appropriate, avoid 'pretend optimisations' by unnecessarily inlining functions. 5. Separate out UART enable from various other PNP hard coding Change-Id: I9b8dad7c02d802e97db73ddf2913d5c6bb33a419 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5916 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/smsc/smscsuperio: Make romstage linkable with headerEdward O'Callaghan
Rewrite smsc/smscsuperio romstage component to be more consistent and provide header there-by removing #include's of early_serial.c's in mainboard's. Change-Id: I572e0c76422f09d4de88935a36c0a59e5350e6e0 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5915 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03mainboard: Remove #include early_serial.c from w83977tf boardsEdward O'Callaghan
These non-ROMCC boards #include the model specific w83977tf Super I/O romstage component. The generic winbond_early_serial() function serves well here to further tighten integration into the new Super I/O framework and drop dependence on #include'ing .c files, leaving only ROMCC boards. Change-Id: Ib63c0f29f994c54e6112702506f288535799706c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5898 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-03superio/ite/it8772f: Move towards removing #include .cEdward O'Callaghan
Move samsung/stumpy board towards generic romstage component and away from poorly written hard-coded model specific Super I/O component. This is an incremental step towards getting obj-level abstraction between board and Super I/O. Change-Id: I358c5abef85c2ffa1b7178025cde8834a35b0a51 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5899 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-02sandybridge: Pass chip info to i915lightup.Vladimir Serbinenko
Change-Id: I280441aadb0575dc0b99584cdcd48cc76a0289a2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5284 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01mainboard/ibase/mb899: Trivial, Non-local header treated as localEdward O'Callaghan
Change-Id: I5cb496d0d582d3dc5c0c0635f632561f8a3dd853 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5897 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-06-01lenovo/x201: Fix order of SPI init.Vladimir Serbinenko
The lock bit for UVSVC/LVSVC was set before both registers were programmed. Change-Id: I000440db5c8dd2f260ebc1b69108b75621faf7b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5167 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo/t60: Implement intel VGA callbacks.Vladimir Serbinenko
Without it option ROM run results in just a black screen. Change-Id: Id203f55ca0f02c290a3f40ac1ec7c5f23c5580bf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5344 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-01lenovo: Make version look like something thinkpad_acpi would acceptVladimir Serbinenko
thinkpad_acpi checks that BIOS version matches some pattern. Report version in this form. Not cleaned up as the idea of this patch seems to be met with resistance. Can make it Thinkpad-specific if the idea is accepted. Change-Id: I15e33e87e7a7f42d6a06f12fb39b5172153af8a1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4650 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/nsc/pc87309: Avoid .c includes in mainboardEdward O'Callaghan
Make superio romstage component link-time symbols. Change-Id: Icde27465a05946498ff7b8f1aaa7a9e8ba074272 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5880 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627hf: Avoid .c includes in mainboardsEdward O'Callaghan
Move towards the removal of the superio model specific xxx_serial_enable implementation. Make remaining superio romstage parts link-time symbols and fix corresponding mainboards to match. The following mainboards remain unconverted as they are ROMCC: - mainboard/supermicro/x6dai_g - mainboard/supermicro/x6dhe_g - mainboard/supermicro/x6dhr_ig - mainboard/supermicro/x6dhr_ig2 and so block the final removal of w83627hf_serial_enable(). Special cases: - mainboard/supermicro/h8qme_fam10: Provide local pnp_ sio func Provide local superio pnp_ programming entry/exit functions as to avoid making superio implementation global symbols. Although this is not the proper/final solution, it does mitigate possible symbol collisions and allow for continued superio refactorisation. Change-Id: Iaefb25d77512503050cb38313ca90855ebb538ad Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5601 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-31superio/winbond/w83627ehg: Depreciate romstage componentEdward O'Callaghan
Part 1/2: These are actually not necessary if Super I/O support is properly utilized. Change-Id: I39b621e582f8d0762276d29492c91dce500f0665 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5870 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-30intel/bayleybay: Add Intel's Bayley Bay mainboardMartin Roth
Bay Trail-I Platform – Bayley Bay-I Customer Reference Board The Bayley Bay CRB-I is a dual-channel DDR3L SO-DIMM non-ECC platform. It is designed to support the Bay Trail-I SoC. This implementation uses the Intel FSP (Vist the Intel FSP website for details on FSP architecture and support). This code does not currently support S3. All other features and IO ports are functional. Booted on Ubuntu 14.04, Mint 16, Fedora 20 with SeaBIOS payload. Memtest86, FWTS, and other tests pass. Notes: - Generates a 2MB binary to be flashed to the upper 2MB of the ROM, to preserve the existing Intel Flash Descriptor & TXE binary. - Tested with B0 & B3 Baytrail I parts Board support page will be updated on acceptance. Change-Id: I80c836c7590f2dc25ec854e7a0bb939024cea600 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5792 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-28superio/winbond/w83627thg: Depreciate romstage componentEdward O'Callaghan
Depreciate the model specific early_serial.c romstage component for this Super I/O in favor of the recent generic winbond romstage framework. Change-Id: I22775dc9b6341c8994d21591b7176abe4dd99911 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5724 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-28superio/winbond/w83627uhg: Depreciate romstage componentEdward O'Callaghan
Depreciate the model specific early_serial.c romstage component for this Super I/O in favor of the recent generic winbond romstage framework. Convert dependent board to generic winbond serial init. Note the clock function is actually invalid since it never enters into PNP config mode to twiddle the register. Further, 48MHz is the default (page 9 of data-sheet) and so romstage.c need not do anything to the clock rate hence why it presumably works with this invalid function. Change-Id: I4706a1446c1b391b8390ac0361700ce6f15b9206 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5725 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-28superio/ite/it8712f: Depreciate model specific early_serial.cEdward O'Callaghan
We now have common ite_*_*() functions for romstage and hence no longer require the model specific portion of this superio support. Change-Id: I30400abf27008a88072673075bba445f100d9ad3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5838 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-05-28mainboard/*: Convert to generic ITE superio romstage componentEdward O'Callaghan
Convert mainboard's that use model specific romstage functions of it8712f to the generic framework by following the reasoning of: a7d14a1 ite/common: Introduce common watchdog and 3.3V VSB helpers Change-Id: I1485306a951103c9a4bc0dbe87c416c91f46c36f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5737 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-26AGESA fam12 fam14 fam15: Declare local callouts staticKyösti Mälkki
Change-Id: I2ff70cafdd808a235ed4f0663e182d306f493c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26amd/dinar: Handle empty HOOKBEFORE_DRAM_INITKyösti Mälkki
Removed function only read ACPI MMIO base address from a couple of registers in IO space. Change-Id: I25a31b7ac1706b9eebc5db0b9604039928328b0a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5683 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_RUNFUNC_ONAPKyösti Mälkki
Change-Id: I9f27e1e814a80864d8ca315fe816a083c55708c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5682 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam15: Unify agesawrapper_amdlaterunaptaskKyösti Mälkki
Pass parameter Func like fam14, fam15tn and fam16kb. Change-Id: I262bf88e431f7035e668ac8f3fb29ac0690b3e52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5681 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam12 fam14 fam15: Common handler for AGESA_DO_RESETKyösti Mälkki
This is x86 "standard" 0xcf9 reset mechanism. Change-Id: Ieb48290b21a7cb1425881fdd65c794e96da0248f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5680 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA fam14: Comment lack of PCI-e slot resetsKyösti Mälkki
These boards return with AGESA_UNSUPPORTED, while other boards return AGESA_SUCCESS here when there is no hardware for external reset signalling. Change-Id: I5aed211b1812888af55a691cfbfa8d7b5aff91bc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5679 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-26AGESA: Add common calloutsKyösti Mälkki
Most of the callouts are not specific to board or even family. Start new file with default callouts doing nothing and returning either AGESA_SUCCESS or AGESA_UNSUPPORTED. Also add callout for returning empty IdsIdData. This feature is not used and could be easily overriden at board-level at later time. Change-Id: I65dbcdd80dddc89d47669ebe62c22caa63792f5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5678 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-25mainboard/google/slippy: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I219ae74d60fd7211de2edee96e74bbe13130bb94 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5849 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-25mainboard/google/bolt: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I31841e7bf578c77d08d452779936fcf5b3026d4f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5848 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-24mainboard/amd: Incorrect usage of logical vs. bitwise andEdward O'Callaghan
Spotted by Clang Change-Id: I26201c7f5e421c38d3965d8e7e62c4a8e670e449 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5833 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2014-05-23mainboard/google/link: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Id967f6057759cf0603c84514d32b067c3658306f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5831 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-23mainboard/google/falco: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I4e5f2d7e8e6b76703fccce38fc7e3165d763e97f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5830 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-23superio/winbond/w83697hf: Depreciate romstage componentEdward O'Callaghan
Depreciate the model specific early_serial.c romstage component for this Super I/O in favor of the recent generic winbond romstage framework. Change-Id: I529c9cd1d8d63db3035b4828b3c3fc43911f49ce Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5727 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2014-05-23mainboard/asus/k8v-x: Remove dubious SIO PNP programming in romstageEdward O'Callaghan
Remove bogus attempt to double program the Super I/O. Remove also a questionable function that enters Super I/O LDN config space, does no actual LDN programming, rather multi-function register programming and then never leaves the config space. Further, we don't export pnp_ symbols from the early_serial.c component into the global namespace. Change-Id: I7d6b97b174249ae16fe881728da5ca3dd069b696 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5800 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2014-05-23Asus F2A85-M: Move to ther proper SIORudolf Marek
The F2A85-M has IT8603E which is a strip down version of IT8728F. Change configuration from provisional IT8712F to the IT8728F. While at it also enable only needed LPC bridge decodes. As the side effect, this change also implements setup of environmental controller, thus it87 driver can detect the temperatures/fans. Change-Id: I22067b13ea27ee37e959a246718d9559c2a3215d Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/4499 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-05-23mainboard/samsung/stumpy: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I6c5cc46385581d6b69d20f6bc9b016b799765d9e Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5829 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/intel/emeraldlake2 Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Idda1a49277c156670014fac27b9f1c378f8df0cd Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5827 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/intel/baskingridge Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I61fe91e467c29f144323af9c4612420f322098b4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5826 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/intel/wtm2: Fix usage of GNU field designator extensionEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I46fad8d236c620ee5dbeb24f4517f20f00db839f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5825 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/kontron/ktqm77: Fix usage of GNU field designator extEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: If948960abbd927aa6d2b471a42a2321a04d992f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5824 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/google/peppy Fix usage of GNU field designator extensionEdward O'Callaghan
Following the reasoning in, 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: Idd7305cb34be77894ca4b6062bc0a2dc61126347 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-23mainboard/google/parrot Fix usage of GNU field designator extensionEdward O'Callaghan
Following the reasoning in: 8089f17 mainboard/lenovo/x230 Fix usage of GNU field designator extension In C99 we defined a syntax for this. GCC's old syntax was deprecated. Change-Id: I5be77fe6670601e103260077fae07a5b9fd41f1d Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5821 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-21 22:13:46 +0000