summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-05-15vexpress: change to write32Vladimir Serbinenko
Change-Id: I5fcc83328441ccfb34ee63a7406d26e393633c21 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/19685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-13vexpress: add gfx initVladimir Serbinenko
Change-Id: I0eff29b74d7df331dcbf2c25799eaae4911e54fc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-13mainboard: Add ASRock G41C-GSArthur Heymans
Start-point is Gigabyte GA-G41M-ES2L. This board features a G41 northbridge and an ICH7 southbridge. This board has slots for both DDR2 and DDR3 (cannot run concurrently though) but only DDR2 is implemented in coreboot. The SPI flash resides in a DIP-8 socket. Tested and working: * DDR2 dual channel (PC2 5300 and PC2 6400, though raminit is picky with assymetric dimm setups); * 3,5" IDE; * SATA; * PCIe x16 (with some patches up for review); * Uart, PS2 Keyboard; * USB, ethernet, audio; * Native graphic init; * Fan control; * Reboot, poweroff, S3 resume; * Flashrom (vendor and coreboot). Tested but fails: * DDR3 (not implemented in coreboot). Tests were run with SeaBIOS and Debian sid, using Linux 4.9.0. Change-Id: I992ee07b742dfc59733ce0f3a9be202a530ec6cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-12mb/gigabyte/ga-g41m-es2l: Don't disable PATAArthur Heymans
This board features a PATA port. TESTED PATA drive works in SeaBIOS and OS. Change-Id: I74dc72c22e6c4fed07f28ef7d88adde54656ae39 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-12mainboard/google/reef: Config needed GPIO for pull-up WALijian Zhao
This change is needed to minimize circuit level stress, by adjusting circuit voltage for proper operation. For mem config GPIO changes: To avoid leakge as those pins have internal 20K pull and 3.3K pull down on mainboard, change internal pull up to none. BUG=b:37998248 TEST=Boot up into OS and enter s0ix. Change-Id: Id82035d8e1fff9fbb8dd3b4125460cdf61a58488 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19577 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-12commonlib: Move drivers/storage into commonlib/storageLee Leahy
Move drivers/storage into commonlib/storage to enable access by libpayload and indirectly by payloads. * Remove SD/MMC specific include files from include/device * Remove files from drivers/storage * Add SD/MMC specific include files to commonlib/include * Add files to commonlib/storage * Fix header file references * Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver * Add Kconfig source for commonlib/storage * Rename *DEVICE* to *COMMONLIB* * Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE* TEST=Build and run on Galileo Gen2 Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/19672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-12qemu/vexpress-a9: Discover RAM size.Vladimir Serbinenko
Probe RAM to find its size instead of hardcoding 1024M. Also properly export it to memory map. Change-Id: Ib411f0a068bd247a9e0cd0a59689a3896921483e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-11mainboard/pcengines/apu2: Add LPC TPM supportPhilipp Deppenwiese
APU2 exposes a LPC header which can be used in conjunction with a LPC TPM module. Change-Id: If9312370a5071ffbeb6d83888c75fa69a0c27819 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/18523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-11mb/sapphire/pureplatinumh61: Sanitize KconfigNico Huber
Remove overrides that set platform defaults or insane values. Change-Id: I11d1c7155bf1c7f9298f60638a6c2f3b128f3fe8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicola Corna <nicola@corna.info>
2017-05-11siemens/mc_apl1: Add usage of external RTC RX6110 SAMario Scheithauer
This mainboard contains an external RTC chip RX6110 SA. Enable usage of this chip and set some initialization values to device tree. Change-Id: I5aceb4401f0bb059ef893dfe7d157716c82e4a76 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-11mb/lenovo/x60/t60: Remove `fn_ctrl_swap` optionNico Huber
The EC doesn't support it. Change-Id: Id2964002406a5fcf992f0ffc3627e3f66a2bb13f Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-11mb/lenovo/x201: Add support for ThinkLightStefan Ott
The thinkpad-acpi driver uses the UCMS (CMOS) ACPI method to control the ThinkLight from the Operating System. This patch adds partial support for that method, enough to enable or disable the ThinkLight: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light With the original BIOS the UCMS method exposes a wide range of values through a generic /proc/acpi/ibm/cmos interface. With the changes suggested in this patch that interface is also exposed but only accepts the commands to enable or disable the ThinkLight; all other commands are ignored. This change would potentially benefit all currently supported Thinkpad models, I only have an X201 available for tests though. Change-Id: I80285f6630b5830766d82e3ecd174c4a51aa9066 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/19644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-11nb/intel/x4x: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Currently only one board uses this northbridge in coreboot but some patches are pending to add more. Change-Id: If035e442d1a23674667f46a07b44c4f2b81be48c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/gm45: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I2308b069b8f2c601254169bcb6a34442c537a311 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/i945: Define and use a default MMCONF_BASE_ADDRESSArthur Heymans
Change-Id: I15550b1cc1a7ccfecba68a46ab2acaee820575b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11siemens/mc_apl1: Correct GPIO settingsMario Scheithauer
- set GPIO_183 to high level for enabling the power of SD card - delete all GPIOs for JTAG interface because they lead to problems with Lauterbach debug hardware Change-Id: I24bfff479601933c43e3dcbfa3baa49510831703 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/19623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
The coreboot had no supported the different frequency for gru yet. e.g: we can't support the bob to run ddr 800M for rev3 board and run 928M for rev4 board. So, in order to support the 800M and 928M ddr frequency for bob different boards. We will use the ram_id and board_id to select the board on bob. Change-Id: I613050292a09ff56f4636d7af285075e32259ef4 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
Spread Spectrum Modulator (SSMOD) is a fully-digital circuit used to modulate the frequency of the Silicon Creations’ Fractional PLL in order to reduce EMI. We need to turn the DPLL spread spectrum feature on to reduce the EMI noise for DDR on bob. Change-Id: I75461d4235bcf55324e6664a1220754e770b4786 Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-10mb/lenovo/s230u: fix sata port map for the msata portpersmule
s230u seems only have two sata ports: one for the 2.5in hdd and one for msata. map 0x11 (port 0 & 4) enables hdd but not msata, and map 0x5 (port 0 & 2) enables both. Change-Id: I1e9e96f0d0849b1e8c4e02aa4f686ceb5e10b3ab Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-09mb/gigabyte/ga-b75m-d3h: Add tpm support for its onboard tpm socketBill XIE
Tested against a lenovo-manufactured tpm 1.2 module: a /dev/tpm0 visible inside GNU/Linux, but there is no menu items in SeaBIOS' interface, which seems a common issue of SeaBIOS on ivb boards. Change-Id: Id0dee74d945bae5d77eb669d8b9d468a67aee508 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19521 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-09superio/ite/it8728f: Hook up common environment-controller driverTobias Diedrich
This replaces the custom environment controller handling in the it8728 driver with the common library. It also updates the two existing boards with hwm register settings in their devicetree config so they better match their vendor BIOS fan control settings. Change-Id: Idf0c8908ba5ad6ff552b8302bffc638aa9052941 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/19293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-05-09google/sand: Add keyboard backlight supportKatherine Hsieh
BUG=None TEST=emerge-sand coreboot chromeos-bootimage and verify the keyboard backlight can be bright and alt+f6, alt+f7 function keys can be used. Change-Id: I86a35551a9348ff6ad26dfccd3b2786282d56069 Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08mainboard/intel/galileo: Add SD controller configurationLee Leahy
Configure the SD controller to handle the SD card slot. * Galileo supports a removable SD card slot. * Set SD card initialization frequency to 100 MHz. * Set default removable delays. * Build SD/MMC components by default TEST=Build and run on Galileo Gen2 Change-Id: Iaf4faa40fe01eca98abffa2681f61fd8e059f0c4 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/19212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-08mb/google/reef: enable SAR and DSARWei-Ning Huang
Enable SAR and DSAR for reef. BUG=b:37612675 TEST=`emerge-reef coreboot` Change-Id: Ie0a59f8fcc9fb104328ee6d276ecab4193ec8eb8 Signed-off-by: Wei-Ning Huang <wnhuang@google.com> Reviewed-on: https://review.coreboot.org/19579 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-05mb/google/poppy: Add eMMC as thermal sensorSumeet Pawnikar
This patch adds the eMMC as one of the thermal sensor under DPTF. Also, updates few comments for better interpretation and mapping. BUG=None BRANCH=None TEST=Built for poppy. Change-Id: I6d05bb7a2f857dc5bc98227c8327b2ff1bd5b913 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/19524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
This reverts commit 39b633b26d6d4cf185fbbdd5a256d0665409bd5b. Commit was accidentally pushed too early and broke the tree. I'll repush the original. Change-Id: Iaca6d43cc8fc0959565d5d151a330c0c7ba38309 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/19596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
TEST=Boot from scarlet, and mipi panel work Change-Id: Id5f81867ea50f72cc0bc13074627134e0dc198ba Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05mainboard/google/sand: Update DPTF parameters provided from thermal teamKatherine Hsieh
Update the DPTF parameters based on thermal test result. 1. Update DPTF CPU/TSR0/TSR1/TSR2 passive/critial trigger points. CPU passive point:83, critial point:99 TSR0 passive point:60, critial point:70 TSR1 passive point:50, critial point:90 TSR2 passive point:77, critial point:90 2. Update PL1/PL2 Min Power Limit/Max Power Limit Set PL1 min to 4W, max to 12W, and step size to 0.2W 3. Change thermal relationship table (TRT) setting. Change CPU Throttle Effect on CPU sample rate to 5secs Change CPU Effect on Temp Sensor 0 sample rate to 60secs The TRT of TCHG is TSR1, but real sensor is TSR2. sample rate to 30secs Change Charger Effect on Temp Sensor 2 sample rate to 30secs Change CPU Effect on Temp Sensor 2 sample rate to 120secs BUG=None TEST=build and boot on electro dut Change-Id: I0ea0bab7fa6b0ad75d9ddacbd7cd882f91e4b0db Signed-off-by: Katherine Hsieh <Katherine.Hsieh@quantatw.com> Reviewed-on: https://review.coreboot.org/19538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05google/fizz: Enable devices under pci 1c.0Shelley Chen
Turn on device 1c.0 in order to enable devices under it. BUG=b:37486021, b:35775024 BRANCH=None TEST=Boot from NVMe Change-Id: Ide66823283c58d2bea0c9886f762f0581741affe Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19533 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASKFurquan Shaikh
This is required to ensure that SCI is generated whenever a host event is set for MODE_CHANGE. Thus, when wake from MODE_CHANGE event occurs, eSPI SCI is generated which results in kernel handler reading host event from the EC and thus causes the wake pin to be de-asserted. BUG=b:37223093 TEST=Verified that wake from mode change event works fine in suspend mode and there is no interrupt storm for GPE SCI after resume. Change-Id: I1dd158ea0e302d5be9bcaa531cd1851082ba59fd Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jenny Tc <jenny.tc@intel.com>
2017-05-05mainboard/siemens/mc_apl1: remove unnecessary headerAaron Durbin
soc/i2c.h does not need to be included in this compilation unit. Change-Id: Ife11642d2e69af7235c93fc54bba38853b046169 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-05-04mb/gigabyte/ga-b75m-d3h: add libgfxinit supportpersmule
Currently native video init works on port HDMI1 (wired to the on-board DVI-D socket) , HDMI3 (the on-board HDMI port), and the VGA port, both text mode and fb mode. Every ports works on GNU/Linux. Tested against an IVB cpu (i7-3770T). Change-Id: If00a7247df0c32b3d1f489fb92d86baaa8fdf8ba Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/19522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-04mb/lenovo/x200: Make button on dock to undock workArthur Heymans
Fetched from vendor DSDT. Change-Id: Ib74408802e977d9caabcb815c9cbd06bd8dbe395 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kevin Keijzer <kevin@librepractice.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-04mb/google/eve: Remove code to set keyboard backlight at bootDuncan Laurie
Remove the code that was enabling the keyboard backlight at boot since this is not desired behavior for this device. BUG=b:35581264 TEST=build and boot on Eve and ensure keyboard backlight does not turn on when booting but can still be enabled in the OS. Change-Id: I7229cf962597c0de74dc005f7afb9408f7a66f42 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-04mb/google/eve: Set SUSWARN# pin to native functionDuncan Laurie
Set GPP_A13/SUSWARN# pin mode to native function 1. This pin is tied to SUSACK# in the schematic and and is intented to be used in Deep Sx so it should not be configured for GPIO mode. BUG=b:35581264 TEST=build and boot on Eve platform, test that Deep S3 and Deep S5 are still functional. (this change should have no visible effect) Change-Id: Ie2dc24d095872ab93a5bfcbe5307c3b7a8e4dbcc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03nb/intel/gm45: Set display backlight according to EDID stringArthur Heymans
Add some known good values for some thinkpads displays. Known good means that at this pwm frequency the display is evenly lit on all duty cycles, the display makes minimal to no noise at lower duty cycles and the display does not flicker. This values differs from vendor (which uses an obviously wrong display clock (190MHz instead of 320MHz) resulting in frequency more than 60% off the intended value. TESTED on Thinkpad X200 with edid ascii string in list and removed from list to see if notice message is shown. Change-Id: Id7bc0d453fac31e806852206ba2c895720b2c843 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19500 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-03mainboard/google/poppy: Add support for cr50 I2C TPMFurquan Shaikh
1. Add support for using cr50 I2C TPM on poppy. This will not be enabled until the next build. 2. Also, configure GPIOs for SPI and I2C TPM only if the corresponding Kconfig options are set. BUG=b:36265511 TEST=Verified on a reworked board that I2C TPM communication works fine. Change-Id: I3b293b8d410a6973a6dfea393c17d0be425b6a28 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-03mainboard/google/poppy: Update GPIO table for next buildFurquan Shaikh
Update GPIO table to match the schematics for next build. Change-Id: I949a14bfaa7972f2257a0b11ee81dcb0771e2f7f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-01mb/*/mainboard.c: Get rid of SPI AFC registerPatrick Rudolph
The AFC—Additional Flash Control Register is set by southbridge code. Remove redundant calls and get rid of it in autoport. Change-Id: I627082e09dd055e3b3c4dd8e0b90965a9fcb4342 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19493 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-01mainboard: add support for lenovo x1 carbon gen 1Alexander Couzens
Based on Thinkpad x230 and schematics. Verified by autoport. USB debug port is the left front usb port Thanks to Holger Levsen for the device. Change-Id: I97c8e01a3ce0577d7dc9e8df7d33db3b155fe3d6 Tested-on: lenovo x1 carbon gen 1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16994 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-01acpi: fix FADT header version for ChromeOS devicesMatt DeVillier
Haswell, Broadwell, Baytrail, and Braswell ChromeOS devices' FADT version were incorrectly set to 3, rather than the correct ACPI_FADT_REV_ACPI_3_0. The incorrect value resulted in these devices reporting compliance to ACPI 2.0, rather than ACPI 3.0. This mirrors similar recent changes to SKL and APL SoCs. Test: boot any affected device and check ACPI version reported vai FADT header using OS-appropriate tools. Change-Id: I689d2f848f4b8e5750742ea07f31162ee36ff64d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19498 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-05-01intel/kblrvp: Enable audio in RVP7 and RVP3Naresh G Solanki
Enable audio: * Add verb table for ALC286 & ALC298 * Enable virtual channel 1 for DmiVc1 & HdaVc1. TEST= Build for kblrvp3 as well as kblrvp7. Boot to OS & verified working of audio on both the boards. Change-Id: Id27e3cf585b93ed4131d7bf3d3b53d3f5404b18e Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18875 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01purism/librem13: Enable support for M.2 NVMeYouness Alaoui
Enable/Disable the PCIe ports to match factory BIOS. The port #6 is used for PCIe on the M.2 connector which allows for NVMe SSDs to function. Change-Id: I8058cbad3da651144545d588c0ae78c5f5e598ac Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/19446 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-04-29rowan: Fix default test HWID.Patrick Berny
Correct the default GBB_HWID to "ROWAN TEST 9387" BRANCH=chromeos-2016.05 BUG=b:35774871 TEST=emerge-rowan coreboot chromeos-bootimage, strings /build/rowan/firmware/image.bin | grep "ROWAN TEST" and look for 9387 in output Change-Id: I7851010305caf056958c8a6a328b0506bf2208cd Signed-off-by: Patrick Berny <pberny@chromium.org> Reviewed-on: https://review.coreboot.org/19488 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-04-28mainboard/google/soraka: Add support for memory configs 1,2,7 and 8Furquan Shaikh
BUG=b:37712455 Change-Id: I3209aaef774712edab5e9f656ee84bfb6917b1c1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19472 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-28mainboard/google/poppy: Add SPDs for memory config 1 and 2Furquan Shaikh
BUG=b:37712790 Change-Id: I7764b4ec55b0beea82eeb6c379ef38ceeb1fb04e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19471 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28mainboard/google/poppy: Enable separate MRC cache for recovery modeFurquan Shaikh
Enable separate MRC cache for recovery mode. This requires change in flash layout to accomodate another region for RECOVERY_MRC_CACHE. BUG=b:37682566 TEST=Verified following scenarios: 1. Boot into recovery does not destroy normal mode MRC cache. 2. Once recovery MRC cache is populated, all future boots in recovery mode re-use data from the cache. 3. Forcing recovery mode to retrain memory causes normal mode to retrain memory as well. Change-Id: I4c748a316436001c5a33754084ab4a74243e21df Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19457 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28sb/nvidia/mcp55: Link early_ctrl.cArthur Heymans
Change-Id: I3a55c2e8077fdb10768df287f38efcd5e2e64bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19365 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-18 04:39:30 +0000