summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2018-06-25sb/intel/common/firmware: Enable me_cleaner for NehalemNicola Corna
Recent patches in coreboot have fixed the freeze issues related to the use of me_cleaner on Nehalem. However, at least on the Lenovo X201, with me_cleaner some PCIe devices (like the SATA and USB controllers) disappear. In particular, setting the AltMeDisable bit ("-S" or "-s" flag) makes them disappear completely, while unsetting it makes them disappear only during cold boots. This kind of behaviour was already observed by Youness Alaoui on the Purism Librem laptops ([1]), and it seems related to some required board-specific PCIe configuration in the ME's MFS partition. For this reason, on the Lenovo X201, "-w EFFS" has been added to the me_cleaner arguments, which whitelists the MFS-equivalent partition for ME generation 2. This fixes all the issues, and the PCIe devices work as expected. [1] https://puri.sm/posts/deep-dive-into-intel-me-disablement/ Change-Id: Ie77a80d2cb4945cf1c984bdb0fb1cc2f18e82ebc Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/27178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-23mb/asus/p8h61-m_pro: Add new mainboardAngel Pons
Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: Add two new Samsung memory optionsCaveh Jalali
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table BUG=b:110498646 BRANCH=none TEST=none Change-Id: Iddacdf1e1d0e2bae0c6168c86e54f5f602cd9d19 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27184 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-23mb/google/poppy/variants/atlas: add GPIO for bluetooth enableCaveh Jalali
This configures a GPIO pin for enabling/disabling bluetooth on the next version of the atlas board. The default is for bluetooth to be enabled at this point. BUG=b:110614620,b:110613353 BRANCH=none TEST=none Change-Id: I4ba940e89b1dc03548b7ab44b8f84dc9a3097acb Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27185 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-22mb/google/poppy/variants/nami: Fix non-working thermal sensor QT2 PSVJohn Su
Modify DPTF TRT parameters to solve thermal sensor QT2 PSV problem. BUG=b:109941652 TEST=The thermal team verify OK Change-Id: Id9d39d8282712a0341fea10f74c0e40bb1ac9d7c Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22mb/google/octopus: Update GBB_FLAG_DISABLE_EC_SOFTWARE_SYNCFurquan Shaikh
Move GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC under each variant config and select it for bip and fleex only. Functional change in this CL is that EC SW sync will be enabled for phaser. BUG=b:110523400 Change-Id: If6f37c6b2ee71130b9ed5b10ce92fb23fa1c39fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-06-22mb/google/poppy/variants/nocturne: Hook up the SX9310 proximity sensor.Enrico Granata
Change-Id: I7358ee34df873098a86d692cc8a909b0ec5023a8 Signed-off-by: Enrico Granata <egranata@chromium.org> Reviewed-on: https://review.coreboot.org/27172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21Revert "sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location"Arthur Heymans
In the end it does not look like RCBA register offsets are fully compatible over southbridges. This reverts commit d2d2aef6a3222af909183fb96dc7bc908fac3cd4. Is squashed with revert of "sb/intel/common: Fix conflicting OIC register definition" 8aaa00401b68e5c5b6c07b0984e3e7c3027e3c2f. Change-Id: Icbf4db8590e60573c8c11385835e0231cf8d63e6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-21google/lars,lili: Add SPD mapping for Hynix 8GB configren kuo
Upstreaming Chromium commit 0bc6c43: Lili: Update Memory IDs TEST=Build and boot up on lili board Original-Change-Id: I6da1e97820b1bf2e751102384eed07236143fe2b Original-Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/956782 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Icf6588582da3b4a7861bced539d51a914b011dc4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27135 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/lenovo/t520: Add Dual Graphics CMOS supportNico Rikken
Adds the CMOS option for Dual Graphics, as is present in more Lenovo models already. Enabling this option ensures that the NVIDIA GPU is powered. More PCI devices can be observed when activating this setting. It was verified on a W520, also by loading a VGA option ROM and achieving a working Dual Graphics system. The CMOS default has been kept to 'Integrated Only', as the usage of Dual Graphics requires an option ROM and drains the battery more quickly. Change-Id: I41ccabd4554ca019684edd6f8b1c23679212c59f Signed-off-by: Nico Rikken <nico@nicorikken.eu> Reviewed-on: https://review.coreboot.org/26114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-06-21mb/google/poppy/variants/nocturne: add two new memory optionsNick Vaccaro
- add K4E6E304EC-EGCF and K4EBE304EC-EGCF to memory strapping table - add SPD files for K4E6E304EC-EGCF and K4EBE304EC-EGCF BUG=b:110277021 BRANCH=none TEST=none Change-Id: If1322311bd91842d6d32725822d91fd6d9e8077c Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nocturne: Update Slave Addresses of Max98373 Amp'sSathyanarayana Nujella
When played Left Only Audio and Right Only Audio, we observed that Audio got swapped. Left Data played on Right Speaker and Viceversa. This patch fixes the above issue. BUG=b:73635449 TEST=Play Left only & Right only Audio and cross check Audio. Change-Id: Ie9c417ad0634a76fc8a4126ee75886603f1b3da0 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/27167 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nocturne: disable p-statesNick Vaccaro
Set register speed_shift_enable=0 in devicetree to disable p-states in coreboot as a temporary workaround for an SoC hang. BUG=b:79666828 BRANCH=none TEST="emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi image onto nocturne, boot to kernel and verify device stays alive and responsive for several minutes without locking up. Change-Id: I71ed4c80c109b28ffa85d48338ce3a62396d272e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: enable camera power and release resetCaveh Jalali
This is a temporary hack to test camera presence before we have full camera support implemented. Basically, we can now probe the camera over i2c to verify that it's connected and the camera LED turns on. BUG=b:80106316 BRANCH=none TEST=camera LED comes on and camera can be probed over i2c. Change-Id: Ibaabf6c6f6a1dabaddd2fc47c820e090ca5984a5 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27128 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/atlas: enable touchscreenCaveh Jalali
This adds the necessary config to enable touchscreen sensor in linux. BUG=b:110286344,b:110286345 BRANCH=none TEST=verified touch functionality using eval board Change-Id: I21efafda3f2ae1dcea19e44f8d66f6dfaac1bb12 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/atlas: support i2c-hid trackpadCaveh Jalali
We plan to use i2c-hid compatible trackpads on atlas, so this switches the trackpad config to i2c-hid. BUG=b:80662079 BRANCH=none TEST=used trackpad to verify motion tracking Change-Id: I2702e61a6aa96250c0c09ea4bd15d0c671eedadc Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/27126 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cbSeunghwan Kim
This change defines SAR sensor device into devicetree.cb. Since only LTE sku has SAR sensor, we will use GPP_B20 as a device_present_gpio. BUG=None BRANCH=poppy TEST=Verified SAR sensor device is loaded by driver in Chrome OS Change-Id: Ib4969e4b82d18b1b1a599de8226c2d7d4bda7915 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27149 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-21mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5Seunghwan Kim
Nautilus 2nd SKU has a leakage voltage at GPP_D0 in S5 state. We need to set this to LOW when entering S5 for clear the leakage. BUG=None BRANCH=poppy TEST=Verified the leakage is gone after update coreboot Change-Id: I054e707b2bc2e63d6f99cd2fd8a57be20615f111 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-21mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKUSeunghwan Kim
For supporting new SKU, we need to override GPIO table and device configuration. The board ID of 2nd SKU of nautilus is started from 9, so we would determine SKU with it. BUG=b:80052672 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7242f23f47010664cc29ea86a126e63c9dd62ccd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27147 Reviewed-by: Enrico Granata <egranata@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-20aopen/dxplplusu: Add romstage timestampsKyösti Mälkki
Change-Id: Ic6e2a350a976a3fcb421d47a0bf5600df994edc2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/27163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-20mb/google/octopus: Configure EC_IN_RW correctlyFurquan Shaikh
This change fixes the following issues with EC_IN_RW signal: 1. EC_IN_RW is an input signal to the SoC. Configure it accordingly in GPIO table for baseboard and bip. 2. GPIO_EC_IN_RW is passed in coreboot tables so that payload can re-sample the GPIO at runtime. BUG=b:110084012 TEST=Verified that EC_IN_RW signal is read correctly in depthcharge. Change-Id: I1c5f5b4b914ced98e89a571dc398df5ba1fe8460 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-06-20mb/google/octopus: Enable Synaptics touchpad devicewuxy
This change adds Synaptics device to phaser project. BUG=b:110236590 TEST=emerge-octopus coreboot chromeos-bootimage reflash the coreboot to DUT,make sure the Synaptics Touchpad can work. Change-Id: Icc1e8c35a9de54ed04187fcf219a72a592d3bd81 Signed-off-by: Xingyu <wuxy@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27159 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-18mb/google/poppy/variants/nautilus: Correct USB OC pin configurationSeunghwan Kim
Due to schematic, we need to correct USB OC pin configuration. - OC0 for Type-C Port 1 - OC1 for Type-C Port 0 - OC2 for Type-A Port - OC3 to NC BUG=NONE BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: Ic71baef646926cc6aadcc5dda7cb14f00e8d3687 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/27099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-18mb/google/octopus: Enable Synaptics touchscreen deviceFurquan Shaikh
This change adds ACPI properties for SYTS7817 device. BUG=b:110013532 Change-Id: Ifdec4efce169c066f212a393df21089d43d8e4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
This creates a fleex variant for octopus. Nothing is set in the variant files here; everything is picked up from baseboard. BUG=b:110085182 TEST=None Change-Id: Ia8b8bb757f67bea997b7f43489c38cac62f7682d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/27105 Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-17mb/pcengines: Remove unneeded includes and dead codeElyes HAOUAS
Fix coding style. Change-Id: Id13c0ee284293c0c06d46c75c850bc7e81cfc1f6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-06-15mainboard/google/Kahlee: All variants identify as Grunt in SMBIOSMartin Roth
All Grunt variants should identify as grunt in SMBIOS so that they're recognized correctly as a unibuild Grunt variant. BUG=b:110244268 TEST=Careena identifies as grunt Change-Id: Iaf254149fbec9551d9220018d6d6a0a1be741538 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/27117 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ixHannah Williams
This pin does not have a native function for eSPI. Nonetheless if we use eSPI, it should be configured as a GPIO and kept unconnected to allow S0ix entry. Also removed initialization of LPC pins in mainboard code as they are already initialized in chipset code. The settings fpr LPC pins in chipset code were updated to those that were previously in mainboard code and have been validated on LPC flavor of Geminilake RVP. BUG=b:79251613 BRANCH=none TEST=From kernel prompt in bip, type powerd_dbus_suspend. Check on EC console that SOC enters S0ix. Change-Id: Ie0c1013fee638a3b7a91469736efc0c25a1597fa Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/23742 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15mb/google/poppy/variants/nami: Update DPTF table from version 1.5John Su
Update dptf.asl and TCC parameters from tuning of the thermal team. BUG=b:72974136 TEST=Match the result from DPTF UI Change-Id: Ic0ffc169ad3939cacb46824ed23999c61a23d2c4 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/27086 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-15mainboard/google/kahlee: Enable keyboard backlight for careena specific SKUKevin Chiu
Enable keyboard backlight by Careena SKUID Set to 10% as the same as google/snappy project BUG=b:110065836 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I7d302c4f50528b0e6b7ef4d990f342a69cff34f5 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/27021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-14cpu/intel/haswell: Use the common intel romstage_main functionArthur Heymans
Tested on Google peppy (Acer C720). Change-Id: I6453c40bf4ebe4695684c1bd3a403d6def82814f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-14mb/lenovo/x200: Enable libgfxinitArthur Heymans
Change-Id: I6919845965d90fe8a20a07748ae4804fed0d0cef Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27013 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14nb/intel/x4x: Deprecate native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I4843f52307b87cff6fa6f4d0c74b87428fefa8ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14mb/*/*: Enable libgfxinit on x4x boardsArthur Heymans
TESTED Intel DG41WV with VGA, Intel DG43GT with VGA and HDMI1 and HDMI2. Change-Id: I774b79cc0ef9dc72ccf48901ab94376b27ed9c7a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Get rid of unneeded whitespaceElyes HAOUAS
Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_E2 for BT_DISABLE_LNick Vaccaro
GPP_E2 will be used as a BT reset line, so configure GPP_E2 as an output and initialize it high (high = out of reset). BUG=b:80089559 BRANCH=none TEST=none Change-Id: If45ef3a592c389a0b80298c59eea849d07d9671e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14mb/google/poppy/variants/nocturne: config GPP_B4 for FCAM_PWR_ENNick Vaccaro
FCAM_PWR_EN signal is changing to connect to GPP_B4 instead of GPP_D8 as it needs a 3.3v gpio to provide enough power to also directly power the camera LED. BUG=b:79667559,b:78122599 BRANCH=none TEST=none Change-Id: Ie875ced45dfa2aa7069851004edde8f77329df34 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/27022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-06-13src/mainboard/*: Remove empty vendor foldersAngel Pons
After removing most geode_lx boards, some mainboard directories are left empty. This patch cleans them up. Change-Id: I2e99eba3d49dec90ceb2ce0c7f61612a9840ce59 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/27092 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-11google/kukui: Add MediaTek MT8183 reference boardTristan Shieh
BUG=b:80501386 BRANCH=none TEST=timer and uart work fine Change-Id: I08644892d34925574f791b000b0035d5afad7022 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/26722 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11mb/*/*/acpi_tables.c: Remove unneeded includesElyes HAOUAS
Change-Id: If1f032d097224a1102ba29d8d45dce46aad3a91a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11{src,util}: Use NULL instead of 0 for pointerElyes HAOUAS
Change-Id: I75fa4577055f25dde0a8b1044c005bba72cabd92 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11google/fizz: fix LAN driver chip_info attachmentMatt DeVillier
As a result of commit: [711fb81] soc/intel/skylake: Swap PCI devfn resides in same PCI device fizz's chip_info for the LAN driver is being overwritten/nulled, as the LAN device is on function 2 (PCIe port 3), but the driver info was set for the post-swapped PCIe port (1). Move the driver chip_info to function 2/port 3, so that it follows the PCI device function when swapped after FSP-s, and is correctly passed to the LAN driver. Test: boot google/fizz (teemo variant), check cbmem console and verify ethernet MAC address and LED config correctly set. Change-Id: I08810c0c89d99af5799f42c7c4e51814f09aafec Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-11mainboard/google/kahlee: Remove unused baseboard codeMartin Roth
This code is no longer needed. BUG=b:107537694 TEST=Build & boot on grunt Change-Id: I71ad01f0d4c69a618d564e514ed99550b72a6b44 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-11mainboard/google/kahlee: Remove Kahlee variantMartin Roth
This code is no longer needed. Removing Kahlee options allows some Kconfig options to be optimized. BUG=b:77693343 TEST=Build Grunt, verify that nothing's changed. Change-Id: I4eeeee7f35381bba8760c8a530251c475d0ee29b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/26777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-06-11mainboard/google/eve: add vendor to subsystem idMatt Delco
The initial subsystem ID had a device ID but not a vendor ID. This change adds the Google vendor ID to the subsystem ID. Change-Id: I14897da115fd6f2ddd492b6c565bd23227197232 Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/26987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-11mb/google/poppy/variants/nami: Add EC_ENABLE_TBMC_DEVICEShelley Chen
Add tablet motion control config to nami devices. BUG=None BRANCH=None TEST=run evtest make sure tablet switch value is 1 in tablet mode and 0 when not in tablet mode Change-Id: Ie1480934dc003d9b467883e001ed89f9a3694d10 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/26970 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-11mb/google/poppy/variants/nocturne: enable nvmeNick Vaccaro
- configure GPP_B7 (PCIE_NVME_CLKREQ_ODL) for NF1 - enable root port 9 - add nvme register settings to devicetree BUG=b:78122599 BRANCH=chromeos-2016.05 TEST='emerge-nocturne depthcharge coreboot chromeos-bootimage', boot to kernel, and verify /dev/nvme* entries exist. CQ-DEPEND=CL:1090070 Change-Id: I0070d33b1ed09bd1f51a680d92ddb7e2bcb1ebc2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/26933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 07:57:34 +0000