summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-02-01mb/{lenovo/x201,packardbell/ms2290}/acpi: Use GOS methodPeter Lemenkov
Change-Id: I6408cb3c9ef1227d8cf7df12d192b10341205e2c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37944 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Modify kohaku's EC_SCI_EVENTS maskTim Wawrzynczak
Remove EC_HOST_EVENT_MKBP from kohaku's EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=System shows ACPI interrupt as the wakeup IRQ, and the MKBP host event is properly processed as well. Change-Id: I9ff964e38e66ccb953a1adad5a936a9da6e4f3a1 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38654 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/lenovo/t520: Switch to overridetreePeter Lemenkov
Change-Id: If6be9cffe97dcd8f733e3bd5a67a408dd817005a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37295 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-01mb/google/hatch: Override CPU flex ratioSubrata Banik
This patch overrides CPU flex ratio on hatch in order to get better boot time numbers in vboot_reference. BUG=b:142264107 TEST=Able to save ~100ms of platform boot time while running with lower cpu flex ratio (i.e. freq ~1500MHz) Without this CL 1100:finished vboot kernel verification 802,443 (148,108) With this CL 1100:finished vboot kernel verification 685,382 (46,496) Change-Id: Idd1d1c0c04b1f742f17227a1335f27a956ee940d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36865 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-30mb: Fix typos in comments in AGESA boardsElyes HAOUAS
Change-Id: I4821c48ccac92f412126cea0f22cca5fd8bf8647 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
2020-01-30mainboard/google/hatch: Fix Puff _PR to toggle NIC ISOLATE# for S0ixEdward O'Callaghan
Turns out when going into S0ix we want the kernel to toggle de-assert to 0 for the ISOLATE# pin on the NIC for S0ix not to be woken by PCIe traffic on PCH. Upon resume the ISOLATE# pin on the NIC is then re-asserted for it to become lively again. BUG=b:147026979 BRANCH=none TEST=Boot puff and do 1500 cycles of S0ix. Change-Id: I3470e1edd93b461b66fc6444541a64339bcdcce3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38523 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-29mb/intel/kblrvp: Replace whitespaces with tabs in dsdt.aslSubrata Banik
Change-Id: I66e2cfd041f9a93668e41d79c40cec9cb1bd917e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-29mb/intel/tglrvp: pin mux for image clocksWonkyu Kim
pin mux for IMGCLKOUT_0 and IMGCLKOUT_1 BUG=none BRANCH=none TEST=Build and boot to OS and check pinctl driver to check pin mux for Image clocks pins(GPP_D4, GPP_H20) Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ifb0c2b17dd481ef6c19bdf9ee84f47ef08d7b9a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-28mb/hp/pavilion_m6_1035dx: Fix typosElyes HAOUAS
Change-Id: Ibd6f6bf7983382901a5327121d277606f609eca4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-01-28mb/lenovo: Remove unnecessary whitespace in commentsPeter Lemenkov
This makes diff between boards even smaller in some cases. Change-Id: I42ecaf5de657275708ddaf2c926fe31fe16a7220 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-28mb/intel/tglrvp: Enable DP ports for TGLRVPWonkyu Kim
TGLRVP uses DdiPort1Hpd and DdiPort1Ddc. So only enable them. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check FSP log or DP port pin mux from pinctl driver. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ief6376ba59c77340e272923958b6b5f0a1456d9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38529 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28mainboard/supermicro/x11-lga1151-series: Disable UART3 and 4Christian Walter
With UART3 and 4 enabled, the serial console in LinuxBoot crashes. This is a short-term solution until we found and fixed the original bug. Change-Id: I75cb387ef12944232b51f6d8d41810bb27754b05 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-01-28mb/google/dedede: Add helper functions to get board_infoKarthikeyan Ramasubramanian
Add helper functions to get board's sku_id and fw_config. Enable EC_GOOGLE_CHROMEEC_BOARDID to get board_id. Add board's SKU ID and OEM name into SMBIOS table. BUG=b:144768001 TEST=Build Test. Change-Id: Id1729e245accf5acc29307a22721362fb1ce0878 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38551 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28mb/google/fizz/variants/endeavour: Enable root ports for TPUsJeff Chase
BUG=b:148221635 TEST=build;install;lspci Change-Id: I1732f7fe64ace41a721a2d6a964988efc97b2579 Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38550 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28commonlib: Add commonlib/bsdJulius Werner
This patch creates a new commonlib/bsd subdirectory with a similar purpose to the existing commonlib, with the difference that all files under this subdirectory shall be licensed under the BSD-3-Clause license (or compatible permissive license). The goal is to allow more code to be shared with libpayload in the future. Initially, I'm going to move a few files there that have already been BSD-licensed in the existing commonlib. I am also exracting most contents of the often-needed <commonlib/helpers.h> as long as they have either been written by me (and are hereby relicensed) or have an existing equivalent in BSD-licensed libpayload code. I am also relicensing <commonlib/compression.h> (written by me) and <commonlib/compiler.h> (same stuff exists in libpayload). Finally, I am extracting the cb_err error code definitions from <types.h> into a new BSD-licensed header so that future commonlib/bsd code can build upon a common set of error values. I am making the assumption here that the enum constants and the half-sentence fragments of documentation next to them by themselves do not meet the threshold of copyrightability. Change-Id: I316cea70930f131e8e93d4218542ddb5ae4b63a2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-27google/octopus: Disable bootblock consoleJulius Werner
The GLK bootblock seems(?) to be hard limited to 32KB and some Octopus variants are so close to that that they only have 0.5KB left. This is blocking development of new core features, so let's disable the bootblock console to gain a couple of KB back (like we already did on RK3288). There are probably other opporunities for code size reduction here (e.g. it seems that almost half(!) of that whole bootblock size is taken up by devicetree.cb structures), but I'm not familiar enough with the platform to dig into them. Change-Id: I05b4ecf5abef7307e3d0a81db04a745ff3da0c42 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38521 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/gigabyte/ga-b75m-d3h: add ACPI definitions for legacy PCI slotsBill XIE
All variants of ga-b75m-d3h lack ACPI definitions for legacy PCI slots, which causes IRQ issue if it gets legacy PCI card installed. The missing definitions (mainly Interrupt Routing Table) are added to fix that. NOTE: The added definitions are actually for ga-b75-d3v, but since they form superset of definitions needed by ga-b75m-d3{h,v}, they can be applied to all three existing variants with suitable preprocessor instructions. Change-Id: Id79c759a5fadb38c2873edc07293cbb14401ac9a Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mainboard/google/hatch: Set GPP_C7 as the wake pin for the NIC on PuffSam McNally
BUG=b:148252157 BRANCH=none TEST=Put a puff in s0ix, send a WoL magic packet. Change-Id: I4a08a2f5505d00909c9301315fcf72f687141f91 Signed-off-by: Sam McNally <sammc@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-27mainboard/system76: Add System76 Lemur Pro (lemp9)Jeremy Soller
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support in coreboot is developed by System76 and provided as the default firmware option. Testing is done on a pre-production model expected to be identical from a firmware perspective to the production model. Working: - Payload - Tianocore - CPU - Intel i7-10510U - Intel i5-10210U - EC - ITE IT5570E running https://github.com/system76/ec - Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys - Battery - Charger, using AC adapter or USB-C PD - Suspend/resume - Touchpad - GPU - Intel UHD Graphics 620 - GOP driver is recommended, VBT is provided - eDP 14-inch 1920x1080 LCD - HDMI video - USB-C DisplayPort video - Memory - Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD - Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM - Networking - M.2 PCIe/CNVi WiFi/Bluetooth - Sound - Realtek ALC293D - Internal speaker - Internal microphone - Combined headphone/microphone 3.5-mm jack - HDMI audio - USB-C DisplayPort audio - Storage - M.2 PCIe/SATA SSD-1 - M.2 PCIe/SATA SSD-2 - RTS5227S MicroSD card reader - USB - 1280x720 CCD camera - USB 3.1 Gen 2 Type-C (left) - USB 3.1 Gen 2 Type-A (left) - USB 3.1 Gen 1 Type-A (right) Not working: - TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0 are not currently supported by the intel fast_spi driver. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-27mb/intel/tglrvp: Enable MIPI cameraWonkyu Kim
Add MIPI camera ACPI Update GPIO pin mux for camera BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board and check camera Simple test method to check camera: capture image by below commands from OS console >media-ctl -V "\"Intel IPU6 CSI-2 5\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI-2 5\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"ov8856 18-0010\":0 -> \"Intel IPU6 CSI-2 5\":0[1]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":0 [fmt:SGRBG10/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [crop:(0,0)/3280x2464]" >media-ctl -V "\"Intel IPU6 CSI2 BE\":1 [fmt:SGRBG10/3280x2464]" >media-ctl -l "\"Intel IPU6 CSI-2 5\":1 -> \"Intel IPU6 CSI2 BE\":0[1]" >media-ctl -l "\"Intel IPU6 CSI2 BE\":1 -> \"Intel IPU6 CSI2 BE capture\":0[1]" >yavta -u -c5 -n5 -I -s 3280x2464 --file=/tmp/frame-#.bin -f SGRBG10 $(media-ctl -e "Intel IPU6 CSI2 BE capture") Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I4189e96f68f0e64e0860405e00eeab84564b86be Reviewed-on: https://review.coreboot.org/c/coreboot/+/37863 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-27mb/google/dedede: Enable ECKarthikeyan Ramasubramanian
Perform EC initialization in bootblock and ramstages. Add associated ACPI configuration. BUG=b:144768001 TEST=Build Test. Change-Id: Ib31ae190818c8870bdd46ea6c3d9ca70dc0485cc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Enable building for Chrome OSKarthikeyan Ramasubramanian
Enable building for Chrome OS and add associated ACPI configuration. BUG=b:144768001 TEST=Build Test Change-Id: Ibb94849a903e4d4364d817de8988a430cd717e4c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Add smihandler stubKarthikeyan Ramasubramanian
Add stub implementation of smihandler. BUG=b:144768001 TEST=Build test. Change-Id: I7ab25888812bfb4578915e342b14355ccd15f5cc Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Enable ACPI and add ACPI tableKarthikeyan Ramasubramanian
Enable ACPI configuration and add DSDT ACPI table. BUG=b:144768001 TEST=Build Test Change-Id: I0aa889cd52bff3e1e9ff7b7b93ec1000045bcfd2 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-27mb/google/dedede: Add GPIO stubsKarthikeyan Ramasubramanian
Add stubbed out GPIO configuration and perform GPIO initialization during bootblock and ramstage. BUG=b:144768001 TEST=Build Test Change-Id: I1397b6a433e5046650f64f7eb9a84c51eb0c7441 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38278 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-26mb/lenovo/x201: Remove dGPU PMH7 bitsArthur Heymans
The bits cleared by this have to do with dGPU power, which this board lacks. TESTED: x201 still boots. Change-Id: I441743f76afc7bbbee930a1c8116035e85d94e52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36911 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-25mb/intel/tglrvp: Enable rp11 for optaneWonkyu Kim
Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk pins. This is also dependent on pciecontroller3 config to be set as 2x2 instead of 1x4 in fit configuration in IFWI. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board from Optane and check 2 NVMe devices from lspci Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ic81244bebac78102af7ba6308ab64b18c886f839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-01-25soc/intel/tigerlake: Fix GPIO communitiesShaunak Saha
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO comuinities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel Tiger Lake Processor PCH Datasheet with Document number:575857 and Chapter number:27. BUG=b:144680462 BRANCH=none TEST=Build and boot tigerlake rvp board. In /sys/kernel/debug/pinctrl verify INTC34C5:0<1-3> listing all the pins for each community. e.g., #cat /sys/kernel/debug/pinctrl/INT34C5:00/pins should list all the community 0 pins. Change-Id: I40c386db060d84c1b7fba9c587f960d6a92f84ba Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-01-24mb/google/drallion: Remove fixed IccMax valuesJohn Su
Remove fixed IccMax values for U22 CPU. IccMax will be selected by CPU SKU. BUG=b:148110226 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to device and checked IccMax[1]. Change-Id: Ifcd31ad5b608ce599d4294a6522fdda022f8a177 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-01-24mb/portwell/m107: Remove mainboard sleepstates.aslWim Vervoorn
BUG=N/A TEST=build Change-Id: Ifb45bc1f7f4d3744124d6797fb4c791fd5f227ca Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-24mb/intel/tglrvp: Enable SATAWonkyu Kim
Enable both SATA ports for TGLRVP. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board with SATA memory Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I9f35682982a6c06522e58b0bbd7162ff02c37f32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38505 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch/var/dratini: Update DPTF parametersWisley Chen
1. Add a TEMP_SENSOR3 2. Update DFPS (fan performance state) table with values received from thermal team 3. Update PL1 override to 15W 4. Update PL2 override to 51W BRANCH=hatch BUG=b:147792204 TEST=build and verify by thermal team Change-Id: I21c17c09a097c963f4dd1b7d5f8212c83a639dc3 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38025 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-22mb/google/hatch: Kohaku: Add MKBP to suspend wake eventsTim Wawrzynczak
This CL allows MKBP events from the EC to wake the system from suspend states. BUG=b:144122000 BRANCH=firmware-hatch-12672.B TEST=Verify that MKBP events generated from EC will wake the system from S0ix. Change-Id: I8a0d2c7ed89fa1ea937a08c3082cc5d3e782efff Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-22mb/facebook/fbg1701: Remove ACPI S4 supportWim Vervoorn
Align the fbg1701 sleepstates implementation with monolith. BUG=N/A TEST=build Change-Id: I3a715781bf51da41d6954463ad38ed94b0dfd217 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-22mb/facebook/monolith: Disable S3 and S4Wim Vervoorn
The monolith board doesn't support the S3 and S4 states because of the watchdog and failover mechanisms. Remove S3 and S4 from the available sleepstates. BUG=N/A TEST=build Change-Id: I01f67d8bb3f9e45caef748caca91eeb6859d7393 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-21mb/google/puff: Add ac/dc loadline configuationsJamie Chen
According to VRTT report, add ac/dc loadline configuations in puff device tree. BUG=b:147206535 BRANCH=None TEST=build coreboot and fsp with enabled fw_debug. Flashed to puff and checked the log. All ac/dc loadline configs were set correctly. Change-Id: Ia806de23a1fefcaac3ce9a462a8a04eee5eabcae Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-01-21mb/google/hatch/var/jinlon: Remove DPTF fan controlWisley Chen
Jinlon will use EC to control fan, so remove DPTF fan control. BUG=b:141259174 TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I8ada4fe72eee260fecf45d00510da8b91e3f10a4 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-21mb/lenovo/t410/Kconfig: Don't select ONBOARD_VGA_IS_PRIMARY explicitlyPeter Lemenkov
ONBOARD_VGA_IS_PRIMARY is selected if board selects DRIVERS_LENOVO_HYBRID_GRAPHICS. See commit 35abe73e with Change-Id: I6594fbb957c9a8135fe670d38b5755adf29d2dff ("mb/lenovo/t430: Fix Dual Graphics"). Change-Id: I39687e5cd34979fd4318978f5aa46ac6cdf721e8 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-21mb/asus/p5qc: Add ASUS P5Q as a variant (with documentation)Ivan Vatlin
Change-Id: I6c7bbb89af88cce1a53c21a4b4d8bc1c284e1cb2 Signed-off-by: Ivan Vatlin <jenrus@tuta.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-21mb/pcengines/apu2/mainboard.c: Add SMBIOS type 16 and 17 entriesMichał Żygowski
Use information provided by AGESA to fill the SMBIOS memory tables. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I45bb2fc36cf0c01670e9fc8559d3a6183ea271f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-01-21biostar/a68n_5200: Switch away from ROMCC_BOOTBLOCKMike Banon
Following the example of change CB:37737 (ee8f969). Switching was done by moving a SIO configuration and the clocks setup from 'romstage.c' to 'bootblock.c'. Tested-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Mike Banon <mikebdp2@gmail.com> Signed-off-by: Damien Zammit <damien@zamaudio.com> Change-Id: I2e710ac61843c09a055523c7971e4c05bae56a37 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-01-21mainboard/hatch: Fix puff USB ACPI names and typesEdward O'Callaghan
Fix devicetree to advertise the correct USB names and types in the generated ASL. BUG=b:146437991 BRANCH=none TEST=booted and inspected the reported generated ASL. Change-Id: I133b4db444f9a5f0a36d8e976ae490f24cf307d8 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-01-20mb/lenovo/x201: Support undock button on X200 ultrabaseMaciej Matuszczyk
Only the ACPI code needs to be extended, as smihandler.c already supported it. The _Q50 Method is just _Q18 with changed name. On Linux, pressing the undock button does nothing, so the only safe way to undock is to press Fn+F9. With this patch, when the undock button is pressed, the green LED lights up, and undocking is safe. Change-Id: Iaaecad031bb1f39dd1a778d0c8eaea6bce9e0f57 Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38446 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20mb/pcengines/*: enable simple IO-based GPIO controlPiotr Kleinschmidt
Add Nuvoton NCT5104D GPIO IO VLDN and define an IO base address unused by any peripheral for GPIO use. Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I034c5d0169b8d97eac97a20c92c22816fd674f79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-01-20mb/facebook/monolith: Drop PWRB deviceWim Vervoorn
The mainboard ASL code contained a power button definition. This is not required as the system uses the standard ACPI power button. Remove the PWRB device from ASL. BUG=N/A TEST=tested using fwts on a facebook monolith. Found-by: fwts 19.12.00 Change-Id: I25a842539ee2e8febc8a1ae88843a71ccb4ee68e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38133 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20{mb/facebook/fbg1701,mb/portwell/m107}: Drop PWRB deviceWim Vervoorn
The mainboard ASL code contained a power button definition. This is not required as the system uses the standard ACPI power button. Remove the PWRB device from ASL. BUG=N/A TEST=build Found-by: fwts 19.12.00 Change-Id: I4fac1411fd99475551bc970818759649f80b3f0e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38134 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-20mb/hp/snb_ivb_laptops: Switch to overridetree setupAngel Pons
NOTE: The ME interface was disabled on folio_9470m and revolve_810_g1. It is assumed that they were ported while the ME was in an abnormal state (usually due to me_cleaner usage), and that it should be enabled. In any case, the MEI device is hidden if the ME fails to boot already. Change-Id: Ibf32a034653946f49f72a2c19c41a4033964ef83 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-20mb/hp/revolve_810_g1: Transform into variantAngel Pons
Update Makefile.inc so as to add the SPD data when needed. Tested building other variants, no spd.bin gets added because they don't select GENERIC_SPD_BIN. Tested with BUILD_TIMELESS=1, binary does not change. Change-Id: I0cda3f839baa227ce6a4b8f0510934125e5afb59 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-20mb/hp/folio_9470m: Transform into variantAngel Pons
Tested with BUILD_TIMELESS=1, binary does not change. Change-Id: I65696c5739469b33253c22c1d5a65cc31ef3a421 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-20mb/hp/8770w: Transform into variantAngel Pons
Since this board does not have integrated graphics, do not install the INT15 handler if it is not selected in Kconfig. NOTE: Since cmos options are not very flexible, this board ends up with a spurious gfx_uma_size option. Other than that, everything is the same. Tested with BUILD_TIMELESS=1, binary does not change when ignoring the cmos options. Change-Id: I2ebcfd5160773bf98a3d23e797a89e290063d112 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 04:48:32 +0000