Age | Commit message (Collapse) | Author |
|
This moves PMIC_BUS from each mainboard's board.h file to a per-
mainboard Kconfig variable. To prevent humans from forgetting to
set a valid value, an invalid default is set in the rk3288 Kconfig
and checked in rk808.c so that compilation will fail if the mainboard
Kconfig does not override it.
Originally, PMIC_BUS was only used by mainboard code as an argument
to RK808 PMIC functions. To conform to the generic RTC API, however,
the RK808 code needs to have the bus number globally defined somewhere
since the rtc_get() and rtc_set() functions don't take any args.
Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass
bus number to the PMIC functions.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=built and booted on Pinky
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55
Reviewed-on: https://chromium-review.googlesource.com/240203
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9642
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BRANCH=None
TEST=emerge-veyron_speedy coreboot
BUG=None
Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e
Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729
Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/237544
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9640
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_speedy and boot the Speedy board
BRANCH=None
Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409
Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234715
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9639
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This applies the differences between Jerry and Brain:
- No EC
- No SD card
- Minor changes to GPIOs (no lid, power button active low)
- No variations between board IDs (yet)
- No backlight/display attached, but we do have some HDMI
and VOP configuration (need to double check that it's right).
BUG=none
BRANCH=none
TEST=built and booted on Brain (requires follow-up CL
to get into depthcharge)
Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105
Original-Reviewed-on: https://chromium-review.googlesource.com/235921
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9638
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This adds a directory with files copied over from Jerry, in addition to
build system related changes (configs/* and Kconfig stuff) necessary
to emerge-veyron_brain coreboot.
The next patch will account for differences between Jerry and Brain.
BUG=none
BRANCH=none
TEST=emerge-veyron_brain coreboot works
Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36
Original-Reviewed-on: https://chromium-review.googlesource.com/236989
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9637
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This BCT table is the same as "ramcode == 1", and has been pass the stress
test with this new Micron type.
-Micron MT41K256M16LY-107:N, ramcode = 4
BUG=chrome-os-partner:32071
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6
Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Due to a missing i2c_init(), we were actually running our TPM with
default divisors at 660KHz. Oops.
While it's commendable that both the TPM and our controller seem to have
been running fine all this time at more than 1.5 times the maximum
frequency they support, we should probably still get that fixed.
Also sync Speedy back up to the other Veyron boards since it seems to
have missed a recent SDMMC patch.
BRANCH=None
BUG=None
TEST=Booted Pinky.
Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49
Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236580
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9634
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This switches all the rk3288 platforms to use the common CBFS wrapper
instead of implementing its own CBFS media driver. It also happens
that veyron_* platforms use Gigadevice SPI flash (at least for now).
As we use more SPI-related stuff, for example eventlog and vboot data in
Brain's case, we will need to use more of the SPI API anyway. This
prevents us from having to duplicate pieces of it for rk3288.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b
Original-Reviewed-on: https://chromium-review.googlesource.com/235882
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9678
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=None
TEST=emerge veyron_mighty and boot the Mighty board
BRANCH=None
Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53
Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234714
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9633
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_jerry and boot the Jerry board
BRANCH=None
Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd
Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234713
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9632
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_pinky and boot the Pinky board
BRANCH=None
Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc
Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9631
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
We use the devicetree to pass the backlight control gpio before,
but if there have different board version, and it uses different
io to control backlight, it will hard to distinguish it. So, we
move the backlight control to mainboard, and use board_id
to distinguish the backlight control.
BUG=None
TEST=emerge veyron_pinky and Boot the pinky board
BRANCH=None
Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3
Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9630
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Like Nyan, Veyron boards use a GPIO to reset the system so that we can
make the accompanying TPM reset secure and unforgeable. The normal
kernel reboot driver knows that, but the SoC-internal watchdog doesn't.
This patch implements a check for the global reset status register in
the early bootblock and triggers a hard_reset() when it matches "first
global watchdog reset" or "second global watchdog reset". Seems that
the difference between the two is is a choice controlled by
wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both
cases.
BRANCH=None
BUG=chrome-os-partner:33141
TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end
up in recovery without this patch but can boot normally with it.
Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7
Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231734
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9629
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add the Samsung-4GB and Hynix-4GB LPDDR inc files.
Use ram_id 1000 correspond to Samsung-4GB LPDDR
and use ram_id 1001 correspond to Hynix-4GB LPDDR.
BUG=chrome-os-partner:33269
TEST=Boot veyron_speedy normal
BRANCH=None
Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b
Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233859
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9628
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Essentially a copy of veyron_jerry for now
BUG=chrome-os-partner:33269
TEST=emerge-veyron_speedy coreboot
BRANCH=None
Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639
Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233822
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9627
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The only way to reliably reset an SD card in an unknown state is by
power-cycling. Since a kernel may crash and reboot at any point, SD
cards may be left in one of them fancy high-throughput modes that
depthcharge (or, in fact, a newly booting kernel without prior
knowledge) doesn't support, so we need to reset the card on every boot.
This patch adds support to turn off an RK808 regulator completely and
uses that to turn off SD card power rails in early romstage. The time
until configure_sdmmc() in ramstage turns them back on should be more
than enough to drain the power rail for an effective power-cycle.
BRANCH=None
BUG=chrome-os-partner:34289
TEST=Booted a Pinky from SD card, noticed that it works before and
after this patch.
Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96
Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233713
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9626
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The ethernet switch, as soon as it is taken out of reset comes up in
default (bridging) mode, which allows traffic to flow freely across
the ports.
Let's keep it in reset such that there is no cross port traffic
happening while the device boots up.
BRANCH=storm
BUG=chrome-os-partner:32646
TEST=verified that the switch is held in reset during boot.
Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37
Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224989
Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-on: http://review.coreboot.org/9465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This adds the TPM device to the devicetree and configures an
active high edge triggered interrupt at IRQ10 and adds the ACPI
Device for the TPM into the DSDT.
It also cleans up the EC PNP ID to use the EISAID for an EC since
there are now two PNP devices declared, and removes the unused
ENABLE_TPM define at the top of the DSDT.
BUG=chrome-os-partner:33385
BRANCH=samus
TEST=build and boot on samus, ensure TPM is functional at IRQ10
CQ-DEPEND=CL:226661
Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86
Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226663
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since CL:226662, all TPMP accessing should be removed as well,
else it will cause wtm2 coreboot failed on build.
BUG=none
BRANCH=none
TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot
CQ-DEPEND=CL:226662
Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff
Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3
Original-Signed-off-by: Harry Pan <harry.pan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/232165
Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9477
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change is made only to make sure there is a good
signal strength on the SPIM lines.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df
Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/249732
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982
Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250451
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current MIPS PLL is configured in such a way that there is
excessive jitter. Correct this by applying new PLL settings. The
resultant frequency is 546MHz instead of 550MHz.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board as part of the JTAG
loading script;
BRANCH=none
Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0
Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245620
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/9671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077
Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243215
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested in Pistachio bring up board; previous delay
at the beginning of bootblock is fixed.
BRANCH=none
Change-Id: I30335677c96bfd651bc49e36b562c48588009d67
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9
Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243223
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set elements:
- UART1 clock dividers and MFIOs
- SPIM1 clock dividers and MFIOs
- USB clock dividers
- System clock divider
- System PLL
- MIPS CPU PLL
BUG=chrome-os-partner:31438
TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB
have proper functionality.
BRANCH=none
Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151
Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241423
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush
Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f
Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
DP panel parameters generally can be retrieved thru edid. The parameters
specified here will be used when edid fetching failed.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush and ryu
Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5
Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238941
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9612
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have known for a while that the old x86 model of calling init_timer()
in ramstage doesn't make sense on other archs (and is questionable in
general), and finally removed it with CL:219719. However, now timer
initialization is completely buried in the platform code, and it's hard
to ensure it is done in time to set up timestamps. For three out of four
non-x86 SoC vendors we have brought up for now, the timers need some
kind of SoC-specific initialization.
This patch reintroduces init_timer() as a weak function that can be
overridden by platform code. The call in ramstage is restricted to x86
(and should probably eventually be removed from there as well), and
other archs should call them at the earliest reasonable point in their
bootblock. (Only changing arm for now since arm64 and mips bootblocks
are still in very early state and should sync up to features in arm once
their requirements are better understood.) This allows us to move
timestamp_init() into arch code, so that we can rely on timestamps
being available at a well-defined point and initialize our base value as
early as possible. (Platforms who know that their timers start at zero
can still safely call timestamp_init(0) again from platform code.)
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit.
Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa
Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234062
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Non-x86 boards currently need to hardcode the position of their CBFS
master header in a Kconfig. This is very brittle because it is usually
put in between the bootblock and the first CBFS entry, without any
checks to guarantee that it won't overlap either of those. It is not fun
to debug random failures that move and disappear with tiny alignment
changes because someone decided to write "ORBC1112" over some part of
your data section (in a way that is not visible in the symbolized .elf
binaries, only in the final image). This patch seeks to prevent those
issues and reduce the need for manual configuration by making the image
layout a completely automated part of cbfstool.
Since automated placement of the CBFS header means we can no longer
hardcode its position into coreboot, this patch takes the existing x86
solution of placing a pointer to the header at the very end of the
CBFS-managed section of the ROM and generalizes it to all architectures.
This is now even possible with the read-only/read-write split in
ChromeOS, since coreboot knows how large that section is from the
CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be
changed on systems that place other data next to coreboot/CBFS in ROM).
Also adds a feature to cbfstool that makes the -B (bootblock file name)
argument on image creation optional, since we have recently found valid
use cases for CBFS images that are not the first boot medium of the
device (instead opened by an earlier bootloader that can already
interpret CBFS) and therefore don't really need a bootblock.
BRANCH=None
BUG=None
TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco.
Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c
Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229975
Reviewed-on: http://review.coreboot.org/9620
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some projects (like ChromeOS) put more content than described by CBFS
onto their image. For top-aligned images (read: x86), this has
traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the
area actually managed by CBFS, as opposed to ROM_SIZE) that is used to
calculate the CBFS entry start offset. On bottom-aligned boards, many
define a fake (smaller) ROM_SIZE for only the CBFS part, which is not
consistently done and can be an issue because ROM_SIZE is expected to be
a power of two.
This patch changes all non-x86 boards to describe their actual
(physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a
mainboard Kconfig select (which is the correct place to declare
unchangeable physical properties of the board). It also changes the
cbfstool create invocation to use CBFS_SIZE as the -s parameter for
those architectures, which defaults to ROM_SIZE but gets overridden for
special use cases like ChromeOS. This has the advantage that cbfstool
has a consistent idea of where the area it is responsible for ends,
which offers better bounds-checking and is needed for a subsequent fix.
Also change the FMAP offset to default to right behind the (now
consistently known) CBFS region for non-x86 boards, which has emerged as
a de-facto standard on those architectures and allows us to reduce the
amount of custom configuration. In the future, the nightmare that is
ChromeOS's image build system could be redesigned to enforce this
automatically, and also confirm that it doesn't overwrite any space used
by CBFS (which is now consistently defined as the file size of
coreboot.rom on non-x86).
CQ-DEPEND=CL:231576,CL:231475
BRANCH=None
BUG=chromium:422501
TEST=Built and booted on Veyron_Pinky.
Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71
Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9619
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for
pre-console initialization) inadvertently moved the timer initialization
after console initialization for IPQ806x, which is apparently not a good
idea for this platform. This patch solves the issue by moving
init_timer() to bootblock_mainboard_early_init(), which is the new hook
explicitly provided to perform pre-console tasks.
BRANCH=None
BUG=None
TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was
already broken. Bisected coreboot and tracked down breakage to commit
a126a62f (ipq8064: use the new utility to build bootblock). Built and
booted successfully with this patch and a revert of a126a62f to confirm
that the bug in question here is fixed.
Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52
Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233290
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9574
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
this is required to do early firmware selection using vboot2. actual
implementation can be done later.
BUG=chrome-os-partner:33755
BRANCH=ToT
TEST=Booted storm.
Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8
Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229425
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch uses the new bootblock_mainboard_early_init() hook to run the
UART pinmuxing on rk3288-based boards before initializing the console.
This allows us to get rid of the hacky second console_init() call in
bootblock_soc_init(). We can also simplify the pinmux selection a bit
since we know that a given board always uses the same UART (still keep
an assert around to be sure, though).
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky.
Change-Id: I3da8b0e4bd609f33cedd934ce51cb20b1190024b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: caabda8fc1ddb4805d86fd9a0d5d2f3cf738bfaf
Original-Change-Id: Ia56c0599a15f966d087ca39181bfe23abd262e72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9604
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On most platforms, enabling the console and exception handlers are
amongst the very first things you want to do, as they help you see
what's going on and debug errors in other early init code. However, most
ARM boards require some small amount of board-specific initialization
(pinmuxing, maybe clocks) to get the UART running, which is why
bootblock_mainboard_init() (and with it almost all of the actual
bootblock code) always had to run before console initialization for now.
This patch introduces an explicit bootblock_mainboard_early_init() hook
for only that part of initialization that absolutely needs to run before
console output. The other two hooks for SoC and mainboard are moved
below console_init(). This model has already proven its worth before in
the tegra124 and tegra132 custom bootblocks.
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu.
Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597
Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231941
Reviewed-on: http://review.coreboot.org/9603
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Select DO_SOR_INIT to enable dp display api
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: Iddf19195722856865a7c06ce96492012ab729184
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 31492f51c030aeb7a3ac792a02665642ec999405
Original-Change-Id: I4daca43239235ca6d233c4457096d3b98fcaf65c
Original-Reviewed-on: https://chromium-review.googlesource.com/234274
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-on: http://review.coreboot.org/9586
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable display supporting functions by select DO_DSI_INIT
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and rush
Change-Id: Ie0e03506702ddab03d7f3fd2528c67c02126c7be
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7133dfcd1afa221be92c6398221cf210d9eddf17
Original-Change-Id: I3a9f93107333ebf83ff235eb1b1e02fc747df3c6
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234272
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9585
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Display configuration is board specific. The change here is preparing
for supporting other than dsi interface.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and test dev/rec mode, also build rush ok
Change-Id: Ied39d5d539d2be4983ab70976bffbe51fccba276
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 36be6b2e35c6246d5384d71b9ab9d4ddbf17764a
Original-Change-Id: I494a04f7d6c0dbad2d472f4c2cd0aabfb23b8c97
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234271
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
dc supporting functions can be used for other than dsi display
interfaces. This change is preparing for supporting sor display
interface.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and test dev/rec mode, also build rush ok
Change-Id: I8a310e188fae70d7726c4360894b392c4546e105
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a7ab7225e3419a0fd93894dbb9a959390f29945b
Original-Change-Id: Id14cbd89457cb91c23526927a432f4eb7cc6291b
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9583
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This configures I2S1 and the codec MCLK muxes to pass the PCM
audio data to the RT5677 codec. Once depthcharge RT5677 codec
driver changes are in, audio 'beeps' should be heard on boot
(Ctrl-U / devmode/recmode).
BUG=chrome-os-partner:32582
BRANCH=none
TEST=Built and booted Ryu/A44.
Change-Id: I2143d544c75ee7e03ffc809561171920650e8d7d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 600c12ddf3543d2dcb47fd3e2f0704803dac5957
Original-Change-Id: Ib071bcb41fba8f6d628a386ed233ec84a54b0323
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233945
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9580
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With this change, audio 'beeps' are heard on boot if Ctrl-U is
pressed, or devmode/recmode is entered. I also tested via an
explicit call to VbExBeep in the kernel boot path. Note that
a couple of Rush CLs for depthcharge are needed for audio, too.
BUG=chrome-os-partner:32582
BRANCH=none
TEST=as above. Built and booted Rush/Norrin64.
Change-Id: I43c65a4d11c5ab7b16289e19f3b42cfc0300ea7c
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4a682fb2403f7c6d53e74bfa945481242577f6c3
Original-Change-Id: Ia37f077569afd806ce6574c4c58813fd7aca1644
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233671
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Due to CL https://chromium-review.googlesource.com/231250,
depthcharge now detects gpio state based on gpio configurations
done by coreboot instead of redoing configuration at
depthcharge. However, PWR button and LID open pins have not
been configured in coreboot. So, add the missing code here.
Otherwise, TOT coreboot/depthcharge rush build can not load
in kernel.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush and test with pwr button press and lid switch
Change-Id: I7acc5e021fa769f68d4cbfd7202df325d4ea73c2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a25dff24a2dcd33fcd15eb766432414af215c3ab
Original-Change-Id: I6c322cd987967920f236aae653294db079678408
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9575
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This CL makes slight changes to the ChromeOS-specific GPIO definitions
of Tegra and Rockchip boards to prepare them for new features in
depthcharge. It adds descriptions for the EC in RW and reset GPIOs,
changes the value Tegra writes into the (previously unused) 'port' field
to describe the complete GPIO information, and removes code to sample
some GPIOs that don't need to be sampled at coreboot time (to help
depthcharge detect errors and avoid using a stale value for something
that should always represent the current state).
BRANCH=None
BUG=None
TEST=None (tested together with depthcharge patches)
Change-Id: I3774979dbe7cacce4932c85810596d80e5664028
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d
Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231222
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9570
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The information about the DMA memory area is further passed
through the coreboot table to the payload.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA; DMA memory area was used to test the
functionality of the DWC2 USB controller driver; behavior was
as expected.
BRANCH=none
Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a
Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/235910
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9593
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some of the options in cmos.layout date back to the K8 days, and have
not been used anywhere else, but K8. This makes nvramtool expose a
very confusing set of options, most of which have no effect. Clean up
the layout before it gets forked again.
TEST: Booted linux, and checked 'nvramtool -a' output.
Change-Id: I1c5f83790ec89ced4dcf954e4949f8554aef6087
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8378
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Essentially a copy of veyron_jerry for now.
BUG=chrome-os-partner:33269
TEST=build
Change-Id: Ie2d115d57fe4b6359fa6bb16a2e85e88ec99e991
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9ec25b9cf2985786e55f0b85c3849ccbd42bddd4
Original-Change-Id: Icc45c8f8bf9f6916ba7187dde277d15cc60df8a2
Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230961
Original-Commit-Id: 407b8b74a068220d8051dd0d85d9c4ec3ea14d51
Original-Change-Id: I546dbc41ccd191159e96b851424fcb37902a57ec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231691
Reviewed-on: http://review.coreboot.org/9554
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Implement VOP and eDP drivers, vop and edp clock configuration,
framebuffer allocation and display configuration logic.
The eDP driver reads panel EDID to determine panel dimensions
and the pixel clock used by the VOP.
The pixel clock is generating using the NPLL.
BUG=chrome-os-partner:31897
TEST=Booted Veyron Pinky and display normal
BRANCH=None
Change-Id: I01b5c347a3433a108806aec61aa3a875cab8c129
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4f863b0b57f2f5293ea8015db86cf7f8acc5853
Original-Change-Id: I61214f55e96bc1dcda9b0f700e5db11e49e5e533
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Like most newer Chromebooks, Pinky and Jerry do not have physical
dev switches.
BUG=chrome-os-partner:33395
BRANCH=none
TEST=built and booted on Pinky, crossystem prints a valid value for
devsw_cur instead of an error.
Change-Id: If97ffa6f99eb31c05915f3ee82aaf6bd252d29e4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db302d7286d3e7df9442928dac1d611a2c103163
Original-Change-Id: I186518a59699d293c7938221b3ae45b27361c255
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229680
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9552
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds support for Pinky rev3 (board ID 2) and Jerry rev2: the
power button GPIO changed polarity to low, the 5V_DRV pin for USB power
was moved to the AP again (welcome back!), and the EMMC_RST_L is now
finally on a port with the right IO voltage so we don't need any weird
pull-up tricks anymore. Since there are very few Jerry rev1s around,
we'll just move it over to the new code directly without introducing
board ID differences (also, because I have no idea how they stuffed it
this time... is this one actually called rev2?).
BRANCH=None
BUG=None
TEST=Still boots on my Pinky rev2, though that doesn't say much.
Change-Id: Id11044cedcaac5a4ae07e696893823925107a6db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 55344a9518ff04edcef01bcd40817e9e4b613717
Original-Change-Id: Iddee360fbda357ecde4ae5fbb5c3a01fe0c22474
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229010
Original-Reviewed-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch ports commit 567f616f (rk3288: slowly raise to max cpu
voltage to prevent overshoot) to Veyron_Jerry. It also fixes include
ordering and some comment grammar in the affected code.
BRANCH=None
BUG=chrome-os-partner:32716
TEST=None
Change-Id: I4ac14a38e4b3acc4926d4f51f409ff12d9c841cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 679014bc843788e8d4d5f5c7470ae76f8be5e942
Original-Change-Id: I9c0aba40ddd8a0852391df184034baa740d063df
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228938
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9550
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This enables RAM_CODE_SUPPORT for veyron* platforms and uses the
generic gpio_get_binaries() function to read RAM_ID GPIOs.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=built and booted on pinky
Change-Id: I7a03e42a270bec7036004375d36734bfdfe6e528
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a325b204ff88131dfb0bdd3dfedb3c007cd98010
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibc4c61687f1c59311cbf6b48371f9a9125dbe115
Original-Reviewed-on: https://chromium-review.googlesource.com/227249
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|