summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-03Asus F2A85-M: Fix the _CRS PCI0 bus infoRudolf Marek
On Asus F2A85-M, the Linux kernel complains that the _CRS method does not specify the number of PCI busses. [FIRMWARE BUG]: ACPI: no secondary bus range in _CRS Just put there 256. This should be part of re-factoring of the whole ACPI stuff. The same change was already done for the AMD Brazos (SB800) boards, based on commit »Persimmon DSDT: Add secondary bus range to PCI0« (4733c647) [1]. [1] http://review.coreboot.org/2592 Change-Id: I06f90ec353df9198a20b2165741ea0fe94071266 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3320 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com>
2013-05-31Lenovo ThinkPad X60: cleanup Native VGA init.Denis 'GNUtoo' Carikli
Change-Id: Iaefa23a6257fd0295357465eb03ccadbef0f70da Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3272 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Trinity boards: Add reserved memory area for SPI base address in ACPISteven Sherk
- SPI controller base address gets overwritten by SD controller under Linux. - Reason for overwrite is the SPI base address isn't in a standard BAR and doesn't get automatically reserved. Solution is to add it as a reserved memory area in ACPI. - This issue was found on the ASUS F2A85-M platform. Currently a workaround on this platform was made as part of: http://review.coreboot.org/#/c/3167/3 - Once approved a follow-on patch for other southbridges using a non-standard BAR for the spi controller. Change-Id: I1b67da3045729a6754e245141cd83c5b3cc9009e Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: http://review.coreboot.org/3270 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-31AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. I have tested on Parmer. Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3347 Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30AMD Llano, Brazos boards: Use `sizeof(var)` to get its sizePaul Menzel
Change `sizeof(type) * n`, where n is the number of array elements, to `sizeof(variable)` to directly get the size of the variable (struct, array). Determining the size by counting array elements is error prone and unnecessary. Rudolf Marek’s patch »ASUS F2A85-M: Correct and clean up PCIe config« [1] contains the same change and is ported over. In the commit message Rudolf makes the following comment. »Not sure why the copy is needed instead of direct reference. Maybe it has something to do with CAR?« Testing on the ASRock E350M1, no regressions were noticed. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I123031b3819a10c9c85577fdca96c70d9c992e87 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3248 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-30AMD Trinity boards: Use `sizeof(var)` to get its sizeRudolf Marek
Change `sizeof(type) * n`, where n is the number of array elements, to `sizeof(variable)` to directly get the size of the variable (struct, array). Determining the size by counting array elements is error prone and unnecessary. Not sure why the copy is needed instead of direct reference. Maybe it has something to do with CAR? These changes are based on Rudolf’s original patch »ASUS F2A85-M: Correct and clean up PCIe config« [1], where it was just done for the ASUS board. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I4aa4c6cde5a27b7f335a71afc21d1603f2ae814b Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3247 Tested-by: build bot (Jenkins) Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-29qemu: remove vga hookGerd Hoffmann
Extra care for the qemu vga should not be needed any more. Since release 0.12 qemu loads the vgabios into the PCI ROM bar, so everything works exactly like it does on real hardware. Change-Id: I4b9bf1244cad437cbe5168600aeee52031456033 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3333 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26beaglebone: initial Kconfig and MakefilesGabe Black
Initial structure of Beaglebone port Change-Id: Ia255ab207f424dcd525990cdc0d74953e012c087 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3279 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26Lenovo ThinkPad T60: Add support for `EARLY_CBMEM_INIT` needed for CBMEM consolePaul Menzel
Add code to support `EARLY_CBMEM_INIT` needed for CBMEM console support by copying GNUtoo’s commit for the Lenovo ThinkPad X60. commit 4560ca5003fe38a066616e8de1a8a414284750fd Author: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Date: Fri Apr 26 12:21:41 2013 +0200 Lenovo ThinkPad X60: Init CBMEM early for CBMEM console support. Reviewed-on: http://review.coreboot.org/3142 Change-Id: I0c4ca5a5e60f4bb3b91653a133ec71039fcca6ab Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3187 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-05-26snow: Add a name to the serial console UART choice block.Gabe Black
This allows other boards to have the same choice block without confusing kconfig. Change-Id: Iea5a7f2d1c263aa7992f504b832ca9c862833c3f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3293 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-20ASUS F2A85-M: romstage.c: Set RAM voltage for non 1.5 Volt casePaul Menzel
Currently the code in the if statement if (!byte) do_smbus_write_byte(0xb20, 0x15, 0x3, byte); only gets executed if `byte == 0x0`, that means only in the default case where RAM voltage is 1.5 Volts. But the RAM voltage should be changed when configured for the non-default case. So negate the predicate to alter the RAM voltage for the non-default cases. To prevent the build error OBJCOPY cbfs/fallback/coreboot_ram.elf coreboot-builds/asus_f2a85-m/generated/crt0.romstage.o: In function `cache_as_ram_main': /srv/jenkins/.jenkins/jobs/coreboot-gerrit/workspace/src/mainboard/asus/f2a85-m/romstage.c:106: undefined reference to `do_smbus_write_byte' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 add `southbridge/amd/agesa/hudson/smbus.c` providing the function `do_smbus_write_byte` to ROM stage in `Makefile.inc`. That can actually be used after the needed header files are included in a previous commit. Change-Id: I89542479c4cf6d412614bcf4586ea98e097328d6 Reported-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3200 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-20Drop llshellStefan Reinauer
This feature has not been used and was never fully integrated. In the progress of cleaning up coreboot, let's drop it. Change-Id: Ib40acdba30aef00a4a162f2b1009bf8b7db58bbb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3251 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-17AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferBruce Griffith
The following commit commit 05f3b117dd44776ed17bc57318f260766039b7e8 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue May 14 09:28:26 2013 +0200 AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for buffer Reviewed-on: http://review.coreboot.org/3246 changed one calculation for the size of the array PortList[] to reflect only four elements, but neglected three additional calculations of the size of the same table. Correct that by setting the size for four array elements in all four calculations. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: Ib66b7b2b388d847888663e9eb6d1c8c9d50b9939 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3250 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-16AMD Inagua: PlatformGnbPcie.c: Allocate exact needed size for bufferPaul Menzel
The following commit commit d0790694b0a66353e5531715648ddaa1a6d577cb Author: Kerry Sheh <shekairui@gmail.com> Date: Thu Jan 19 13:18:37 2012 +0800 Inagua: Inagua GNB ddi lanes and pcie lanes config update Reviewed-on: http://review.coreboot.org/544 assigns lanes 4 and 5 to PCI device number 4, but does not adapt the rest of the code. After the commit above, the array `PortList []` only has four elements, but the buffer size `AllocHeapParams.RequestedBufferSize` is set to a size as it still has five elements. Correct that by setting the size for four array elements. [1] http://review.coreboot.org/#/c/3239/3/src/mainboard/amd/inagua/PlatformGnbPcie.c Change-Id: I3ff07f308ffd417d2bf73117eda9da2a1a05f199 Reported-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3246 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-14AMD Fam15tn boards: BiosCallOuts.c: Declare codec arrays as `static`Paul Menzel
These arrays are declared as `static` for AMD SB800 based boards, so do the same for this generation. Rudolf Marek just changed `const CODEC_TBL_LIST` to `static const` in [1]. Adapt all Fam15tn based boards (AMD Parmer, AMD Thatcher, ASUS F2A85-M) to keep the differences between them small. [1] http://review.coreboot.org/#/c/3170/3/src/mainboard/asus/f2a85-m/BiosCallOuts.c Change-Id: I353b38bd8bc77ba500a4b7fe9250e9aa3071c530 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3198 Tested-by: build bot (Jenkins)
2013-05-14AMD Fam15tn boards: Document lane ID mapping from BKDGRudolf Marek
To make it easier to fill in the values, place the table from the BIOS and Kernel Developer’s Guide (BKDG) [1] as a comment. [1] http://www.coreboot.org/Datasheets#AMD_Fam15 Change-Id: I218f76e9fa2dc88d47af51ea6c062e315afb0000 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3221 Tested-by: build bot (Jenkins)
2013-05-14AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memoryPaul Menzel
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory space to save the PCIe configuration to. This is the With the following definitions in `AGESA.h` $ more src/vendorcode/amd/agesa/f14/AGESA.h […] /// PCIe port descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info } PCIe_PORT_DESCRIPTOR; /// DDI descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info } PCIe_DDI_DESCRIPTOR; /// PCIe Complex descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in topology */ IN UINT32 SocketId; ///< Socket Id IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN VOID *Reserved; ///< Reserved for future use } PCIe_COMPLEX_DESCRIPTOR; […] memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and, as two struct members are pointers to arrays with elements of type `PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these times the number of array elements have to be reserved: a + b * 5 + c * 2. sizeof(PCIe_COMPLEX_DESCRIPTOR) + sizeof(PCIe_PORT_DESCRIPTOR) * 5 + sizeof(PCIe_DDI_DESCRIPTOR) * 2; But for whatever reason parentheses were put in there making this calculation incorrect and reserving too much memory. (a + b * 5 + c) * 2 So, remove the parentheses to reserve the exact amount of memory needed. The ASRock E350M1 still boots with these changes. No changes were observed as expected. Rudolf Marek made this change as part of his patch »ASUS F2A85-M: Correct and clean up PCIe config« [1]. Factor this hunk out as it affects all AMD Brazos and Trinity based boards. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3239 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-12Revert "PC Engines ALIX.1C: Add CMOS defaults."Peter Stuge
Revert commit f90071faeee3358748d0c8d31e46721b53241e28 [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h GEN build.h SCONFIG mainboard/pcengines/alix1c/devicetree.cb CC arch/x86/lib/cbfs_and_run.romstage.o CC arch/x86/lib/memcpy.romstage.o CC arch/x86/lib/memset.romstage.o CC arch/x86/lib/rom_media.romstage.o CC arch/x86/lib/romstage_console.romstage.o CC console/die.romstage.o CC console/post.romstage.o CC console/vtxprintf.romstage.o CC device/device_romstage.romstage.o CC lib/cbfs.romstage.o CC lib/compute_ip_checksum.romstage.o CC lib/gcc.romstage.o CC lib/lzma.romstage.o CC lib/memchr.romstage.o CC lib/memcmp.romstage.o CC lib/memmove.romstage.o CC lib/ramtest.romstage.o CC lib/uart8250.romstage.o CC southbridge/amd/cs5536/smbus.romstage.o ROMCC generated/bootblock.inc GEN generated/bootblock.ld make: *** No rule to make target `nvramtool', needed by `coreboot-builds/pcengines_alix1c/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/#/c/3229/ [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_pcengines_alix1c/ Change-Id: I4764d90c39ccdb4dc7e7a9aef7525c306614e1a8 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3245 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-12Revert "Asus M4A785T-M: Add CMOS defaults."Peter Stuge
Revert commit b8b3e8bff32ee7dddcacec11e015f6683783eb2f [1] as it was merged without its dependencies and therefore the source tree currently does not build [2][3]. OPTION option_table.h SCONFIG mainboard/asus/m4a785t-m/devicetree.cb make: *** No rule to make target `nvramtool', needed by `coreboot-builds/asus_m4a785t-m/coreboot.pre1'. Stop. make: *** Waiting for unfinished jobs.... OPTION cmos_layout.bin [1] http://review.coreboot.org/3224 [2] http://www.coreboot.org/pipermail/coreboot/2013-May/075864.html [3] http://qa.coreboot.org/job/coreboot-gerrit/6251/testReport/junit/(root)/board/i386_asus_m4a785t_m/ Change-Id: I8bf33b62b56627f0eea9440ff5e5136e4122ef01 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/3244 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-05-11Remove the wtm1 mainboardDuncan Laurie
This was an early bring-up reference board for ULT but it is no longer being worked on and was never complete enough to be useful and I no longer have a board so it is already stale and untested. All ULT bring-up work has moved to the wtm2 mainboard instead. Change-Id: If64d61bf7a3fc8c9e16096ffc28fa4128aa99477 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3231 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-11PC Engines ALIX.1C: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Disable baud_rate = 115200 power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0x7f nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Iba2701d4611cd2c2e5a2d76d41ffc23ed65574e8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3229 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-11haswell: Fix VGA option rom INT15 handlerDuncan Laurie
The format of this function changed but was not updated in all mainboards. This fixes BaskingRidge and WTM2. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Ia717ae14f99cee6d83ccdb1e26b9d7defe1638c4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/48896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3230 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10Get rid of MAXIMUM_CONSOLE_LOGLEVEL; compile all messages into the coreboot ↵Ronald G. Minnich
binary This option has never had much if any use. It solved a problem over 10 years ago that resulted from an argument over the value or lack thereof of including all the debug strings in a coreboot image. The answer is in: it's a good idea to maintain the capability to print all messages, for many reasons. This option is also misleading people, as in a recent discussion, to believe that log messges are controlled at build time in a way they are not. For the record, from this day forward, we can print messages at all log levels and the default log level is set at boot time, as directed by DEFAULT_CONSOLE_LOGLEVEL. You can set the default to 0 at build time and if you are having trouble override it in CMOS and get more messages. Besides, a quick glance shows it's always set to max (9 in this case) in the very few cases (1) in which it is set. Change-Id: I60c4cdaf4dcd318b841a6d6c70546417c5626f21 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3188 Tested-by: build bot (Jenkins)
2013-05-10Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Ifa09c7a468e3e0713b426763266ae633e67d8397 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3224 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-10AMD Thatcher: remove unused macros in PlatformGnbPcieComplex.hSiyuan Wang
The macros GNB_GPP_PORTx_PORT_PRESENT, GNB_GPP_PORTx_SPEED_MODE, GNB_GPP_PORTx_LINK_ASPM and GNB_GPP_PORTx_CHANNEL_TYPE are not used. Change-Id: I5c7b7d45880367dba452ebcd4f01fbd0c15aac22 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3087 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-07asrock/e350m1: reduce default stack sizeStefan Reinauer
The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes Removing the Kconfig variable STACK_SIZE to use the default results in the following numbers of stack usage. $ grep stack coreboot_with_patch.log CPU1: stack_base 00287000, stack_end 00287ff8 CPU1: stack: 00287000 - 00288000, lowest used address 00287da8, stack used: 600 bytes CPU0: stack: 00288000 - 00289000, lowest used address 0028875c, stack used: 2212 bytes [1] http://review.coreboot.org/#/c/3154/ (comment May 2 10:21 AM) Change-Id: Ibdb2102c86094fce3787e3b5a162ca8423de205c Signed-off-by: Stefan Reinauer <reinauer@google.com> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3209 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-06exynos5250/snow: deprecate time.hDavid Hendricks
This re-introduces 2fde966 (http://review.coreboot.org/#/c/3177/) which was reverted due to unsatisfied dependencies. time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Change-Id: I8e60105629d9da68ed622e89209b3ef6c8e2445b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Lenovo ThinkPad X60: Clean up `romstage.c`Paul Menzel
1. Move comment for console init to correct place. 2. Start output with capital letter and add full stop at the end. 3. Add missing »)« at the end of description of GPIO 10. 4. Use tabulators instead of spaces. 5. Indent the code automatically using GNU indent [1] with the `-sc` switch adding stars in front of comment blocks as the good indent manual documents. $ indent -linux -sc src/mainboard/lenovo/x60/romstage.c Leave the numbers left aligned as it is more beneficial to be able to run indent without adapting the result afterward. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I2fa018ec28ff19d23d68754b565c13a7d7a57355 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3185 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Revert "exynos5250/snow: deprecate time.h"David Hendricks
This reverts commit 2fde9668b47e74d1bfad2f1688a4481e6b966d04 Somehow this got merged before its dependencies. 3190 must be merged first, followed by 3176. However 3190 will fail while this patch is in. So the situation can't correct itself. Reverting this until the other two go in. Change-Id: I176f37c12711849c96f1889eacad38c00a8142c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3195 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-04Asus F2A85-M Enable the SD controller for F2A85-MRudolf Marek
If the SD controller is "off" hudson.c won't disable that because, there is no code for this yet. The PCI device is still visible and PCI BAR will be allocated by Linux. Unfortunately it may happen that the particular address is used by non-standard BAR for SPI controller. Change-Id: Ied7c581727541e2c81b0b1c2b70fd32de0014730 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3167 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-03exynos5250/snow: deprecate time.hDavid Hendricks
time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I14ebf75649d101491252c9aafea12f73ccf446b5 Reviewed-on: http://review.coreboot.org/3177 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-03mainboard/{asus/f2a85-m,amd/thatcher}: move UDELAY_LAPICDavid Hubbard
Stefan Reinauer suggested 'select UDELAY_LAPIC' did not belong in f2a85-m/Kconfig. It got there via copy-paste from thatcher/Kconfig so this commit removes the 'select UDELAY_LAPIC' from both and puts it in cpu/amd/agesa/family15tn/Kconfig Since f2a85-m is the only Thatcher board coreboot supports right now, this should not break any other boards. Change-Id: I811b579c31f8d259a237d3a6724ad3b17f3a6c3e Signed-off-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-on: http://review.coreboot.org/3178 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2013-05-01AMD Hudson A55E: Remove GEC firmware blob kconfig promptBruce Griffith
The "gigabit ethernet controller" (GEC) block was added to AMD Hudson A55E to integrate ethernet capabilities into an AMD southbridge. The GEC is designed to work with B50610 and B50610M gigabit PHY chips from Broadcom. These parts may not be generally available in small quantities for embedded development. The GEC block requires an opaque firmware blob to function. The GEC blob is controlled by AMD and Broadcom and is not available from coreboot.org. This change removes GEC support from AMD Parmer and AMD Thatcher mainboards since these boards do not have the Broadcom PHY. AMD has requested that the GEC be hidden for Hudson FCH since the PHY parts are not generally available. This Kconfig option can make it appear that this is a viable and supported way to add Ethernet to an embedded board. It is possible to use the Hudson GEC block with other PHYs, but this requires development of a custom GEC blob and a custom Ethernet driver. A custom GEC blob has been developed for a Micrel PHY, but there is no accompanying driver. Change-Id: I7a7bf4d41e453390ecf987c9c45ef2434fc1f1a3 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3127 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-05-01Google/Snow: Revise bootblock initialization.Hung-Te Lin
It's fine to always start timer even in suspend/resume mode, so we can move the timer_start() back to the very beginning of boot procedure. That provides more precise boot time information. With that timer change, the wake up state test procedure can be simplified. Verified by building and booting firmware image on Google/Snow successfully, and then suspend-resume without problem (suspend_stress_test). Change-Id: I0d739650dbff4eb3a75acbbf1e4356f2569b487d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01Google/Snow: Remove duplicated SPI1 initialization in bootblock.Hung-Te Lin
The firmware media source (SPI1) is already initialized by Exynos iROM. There is no need to do it again. Verified by building and booting Google/Snow successfully. Change-Id: I89390506aa825397c0d7e52ad7503f1cb808f7db Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Google/Snow: Remove unnecessary serial console init code.Hung-Te Lin
The "console_init" does initialize UART driver (which will setup peripheral and pinmux) and print starting message. Duplicated initialization can be removed. Also, console_init (from console.c) is always linked to bootblock (and will do nothing if CONFIG_EARLY_CONSOLE is not defined) so it's safe to remove #ifdef. Verified by building and booting on Google/Snow, with and without CONFIG_EARLY_CONSOLE. Change-Id: I0c6b4d4eb1a4e81af0f65bcb032978dfb945c63d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3150 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Lenovo ThinkPad X60: Init CBMEM early for CBMEM console support.Denis 'GNUtoo' Carikli
Enable `EARLY_CBMEM_INIT` for CBMEM console support by looking how other boards do this. This commit is tested by enabling the CBMEM console (`CONSOLE_CBMEM` in Kconfig) and then in GRUB 2 (as a payload) with the cbmemc command from the cbmemc module and in userspace with ./cbmem -c. Both worked. Change-Id: I34618a55ded7292a411bc232eb76267eec17d91e Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3142 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-04-30Google/Snow: Temporary fix for resume failure.Hung-Te Lin
The DDR3 memory initialization (with "mem_reset" set on normal boot) will cause resume to be unstable, especially when X is running. System may show X screen for few seconds, then crash randomly and unable to recover - although text console may still work for a while. Probably caused by corrupted memory pages. 'mem_reset' (which refers to RESET# in DDR3 spec) should be enabled according to DDR3 spec. But it seems that on Exynos 5, memory can be initialized without setting mem_reset for both normal boot and resume - at least no known failure cases are found yet. So this can be a temporary workaround. Verified by booting a Google/Snow device with X Window and ChromeOS, entering browser session with fancy web pages, closing LID to suspend for 5 seconds, then re-opening to resume. Suspend/resume worked as expected. Also tried the "suspend_stress_test" with X running and finished 100 iterations of suspend/resume test without failure. Change-Id: I7185b362ce8b545fe77b35a552245736c89d465e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3148 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-29Google/Snow: Enable suspend/resume.Hung-Te Lin
Add the suspend/resume feature into bootblock and romstage. Note, resuming with X and touchpad driver may be still unstable. Verified by building and booting successfully on Google/Snow, and then executing the "suspend_stress_test" in text mode ("stop ui; suspend_stress_test") in Chromium OS, passed at least 20 iterations. Change-Id: I65681c42eeef2736e55bb906595f42a5b1dfdf11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-26google/snow: Revise romstage initialization code.Hung-Te Lin
Move board setup procedure to snow_setup_* functions, and Snow board-specific (wakeup) code to snow_* for better function names and comments. Verified by successfully building and booting on Google/Snow. Change-Id: I2942d75064135093eeb1c1da188a005fd255111d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3130 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-25google/snow: Add "wakeup" module for suspend/resume.Hung-Te Lin
The "wakeup" procedure will be shared by bootblock and romstage for different types of resume processes. Note, this commit does not include changes in romstage/bootblock to enable suspend/resume feature. Simply adding functions to handle suspend/resume. Verified by successfully building and booting Google/Snow firmware image. Change-Id: I17a256afb99f2f8b5e0eac3393cdf6959b239341 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3129 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-25arm/exynos: Allow DRAM controller to be initialized without clearing RAM ↵Hung-Te Lin
content. To support suspend/resume, PHY control must be reset only on normal boot path. So add a new param "mem_reset" to specify that. Verified to boot successfully on Google/Snow. Change-Id: Id49bc6c6239cf71a67ba091092dd3ebf18e83e33 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3128 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-23AMD Thatcher: ConnectorTypeDP supports both DP and HDMISiyuan Wang
It seems that ConnectorTypeDP in DdiList supports both DP and HDMI monitors. I tested by DP monitor and HDMI monitor connected by passive DP->HDMI adapter. Video and audio are OK. Hot plugging is also supported. This commit partially reverts commit >AMD Thatcher: Fix PCIE link issues< (7f23aeb0) [1]. [1] http://review.coreboot.org/3011 Change-Id: I23cf1c69a8274f47daf56f1a12aafd88bad4a128 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3088 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-23GOOGLE/SNOW: get graphics workingRonald G. Minnich
This adds support for display bring-up on Snow. It includes framebuffer initialization and LCD enable functions. Change-Id: I16e711c97e9d02c916824f621e2313297448732b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3116 Tested-by: build bot (Jenkins)
2013-04-20AMD SB800 based boards: Use `#include <sb_cimx.h>` instead of `"sb_cimx.h"`Paul Menzel
Due to $ more src/southbridge/amd/cimx/sb800/Makefile.inc […] romstage-y += cfg.c romstage-y += early.c romstage-y += smbus.c ramstage-y += cfg.c ramstage-y += late.c […] `src/southbridge/amd/cimx/sb800/` is passed with the switch `-I` to the compiler, where it is also going to find the header file `sb_cimx.h`. Therefore use `#include <sb_cimx>` everywhere, which is what some AMD SB800 based boards already do. The only effect is, that the compiler will not needlessly look into directories which do not contain the header file [1]. The following command was used for the replacement. $ git grep -l sb_cimx.h src/mainboard/ | xargs sed -i 's/#include "sb_cimx.h"/#include <sb_cimx.h>/' [1] http://gcc.gnu.org/onlinedocs/cpp/Search-Path.html Change-Id: I96ab34bac1524e6c38c85dfe9d99cb6ef55e6d7c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3118 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 21:05:44 +0000