summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-12-05mb/asrock/h110m: disable CLKREQ to use onboard LANMaxim Polyakov
The PCH uses the SRCCLKREQ# pin to detect PCIe device in the slot in order to send clock signal to it. However, this logic is not required for the Realtek LAN device, since this chip is soldered to the board and always uses clocking. The chipset can't receive the clock request signal (most likely this pin isn't connected) and doesn't enable the CLK. For this reason, the device is broken during the initialization phase. The patch disables clock request logic for the PCH PCIe port 6 to initialize the onboard LAN device correctly. Change-Id: I5cbce6177c89052eb50959f43903b6f8a607e77f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36377 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05Revert "mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch"Kane Chen
This reverts commit 0bc35af93326ec3232ec73c9b1334241b85f0252. Reason for revert: This change breaks runtime s0ix. BRANCH=hatch BUG=b:141831197 TEST=Check slp_s0 residency increased when system is idle. Change-Id: Ida80f55b56de7129ed629eb29bd14f2ef300126f Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
This patch changes all existing instances of clrsetbits_leXX() to the new endian-independent clrsetbitsXX(), after double-checking that they're all in SoC-specific code operating on CPU registers and not actually trying to make an endian conversion. This patch was created by running sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g' across the codebase and cleaning up formatting a bit. Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-12-04mb/google/octopus: Create Lick variantHash.Hung
Create new variant for Lick that is copied from phaser variant. Remove unnecessary code, due to not support touchscreen and stylus. Set to default_override_table. Remove variant.c. BUG=b:145181137 BRANCH=octopus TEST=./util/abuild/abuild -p none -t google/octopus -x -a Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174 Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04mb/google/drallion/variants/drallion: Adjust all I2C CLK to meet specJohn Su
After adjustment on Drallion Touch Pad CLK: 393 KHz Touch Screen CLK: 381 KHz H1 CLK: 391 KHz BUG=b:144245601 BRANCH=master TEST=emerge-drallion coreboot chromeos-bootimage measure by scope with drallion. Change-Id: Id669d7199bc6ed4b55d7542f095c6c8baf00f984 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37230 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04mb/google/kohaku: Adjust I2C clock frequencySeunghwan Kim
All serial I2C bus frequencies should not be over 400KHz in kohaku, but the measurement showed frequencies of I2C1 and I2C4 were over 400KHz. (b:144885961) This change adjusts I2C speed settings to limit that frequencies to 400KHz. The new setting values have been from other projects using same I2C components, and verified I2C1 and I2C4 frequencies < 400MHz internally. BUG=b:144885961 BRANCH=firmware-hatch-12672.B TEST=Verified I2C1 and I2C4 frequency not over 400KHz Change-Id: I9614fb39b6e55cb2ce1b0879a9f5204e55002f8d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-04mb/google/hatch/var/akemi: tune DPTF for AkemiPeichao Wang
Tune DPTF to ensure compliance with Akemi thermal design requirements BUG=b:144195069 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ie0e6d93e1fc0c684e067d1450eb119a53cfefaed Reviewed-on: https://review.coreboot.org/c/coreboot/+/36716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-03hatch: Create stryke variantDtrain Hsu
(Auto-Generated by create_coreboot_variant.sh version 1.0.0). BUG=b:145101696 TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_STRYKE Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Iea6f8a1c6c24a1e3545c364551cb623debdc4a1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-03src: Add missing include <stdlib.h>Elyes HAOUAS
Change-Id: I17dc2fed6c6518daf5af286788c98c049088911e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-03mb/google/drallion: Disable GPIO dynamic PM configurationSubrata Banik
BUG=b:144002424 TEST=Ensured no TPM time out issue and system can boot to OS Change-Id: I7282e6c2d9627846039638bdc0db3ee7ebba5f12 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-03AGESA boards: Drop commented out codeKyösti Mälkki
Change-Id: I9db1147c5e112e5e6832eeece2214fece8aa6b83 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-02mb/g/drallion: Enable privacy screen on Drallion variantMathew King
Enable ACPI methods to control privacy screen on Drallion devices. Drallion devices may not have a privacy screen and it is up to the EC to determine if the privacy screen is present on the system. BUG=b:142656363 TEST=emerge-drallion coreboot chromeos-bootimage Change-Id: I79d02bb1b25f0deb49ae4bb852b7ed8c21fd31c7 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36045 Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02src: Move 'static' to the beginning of declarationElyes HAOUAS
Change-Id: I9b2cc1bb58922d9e32202ea4c20b9aacfe308bad Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-02mb/intel/icelake_rvp: Remove unused mainboard ACPI write tableAamir Bohra
Change-Id: I19040cca064c2ce063aab77391e0577271c6e9dc Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37354 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2019-12-02sb/amd/cimx: replace cimx_util with common ACPIMMIO AMD blockMichał Żygowski
Drop the redundant cimx_util, remove the includes when appropriate and replace the implementation with amdblocks/acpimmio where needed. TEST=boot PC Engines apu1 and launch Debian with Linux kernel 4.14.50 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I66b1f82926372b6ebb570893b6eb73c7f2935b9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/37328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-02mb/google/poppy: Remove useless ifs around voltage and GPIO direction ↵Sakari Ailus
configuration The methods generally tested OP region settings and only changed them if they were not in their desired values. Instead, assign them directly without checking them. BUG=chromium:959232 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: I3ceca4bd51c4410c7020431f4fd682c4ca925110 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36746 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02mb/google/poppy: Remove redundant mutexSakari Ailus
The mutex is only used in one method and that method is serialised. Remove the mutex. BUG=chromium:959232 Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: Ic173d557f4b49cc9e860d13b782fc4940fd80869 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36745 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02mb/google/poppy: Rework OV13858 power on sequenceSakari Ailus
In particular: - Set voltage before enabling regulators - Enable regulators and the clock without any sleeping in between. There's no need to wait there. - Sleep 1 ms in order to wait for regulator voltages settling before lifting xshutdown. BUG=chromium:959232 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: I0f8857ae369d5038f293a0e2c48c681df535ad86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-02mb/google/poppy: Rework OV5670 power on sequenceSakari Ailus
In particular: - Enable regulators *after* configuring the voltage - Allow 1 ms for the voltages to settle - Enable clock after powering on regulators - Remove extra delays between enabling things. The sensor requires 8192 clock cycles after the reset is lifted before I²C access, so 1 ms is enough. - Make the delay after lifting xshutdown 10 ms. This guarantees that streaming will only start once the sensor has had enough time to settle after lifting the reset. BUG=chromium:959232 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: I4589a7d7ec324f4520572a406cc11ad3feec8b21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-02mb/google/poppy: Power on PMIC before accessing its opregionSakari Ailus
The PMIC opregion is used to change the direction of two GPIOs for I²C daisy chain operation. Do this after the PMIC is powered on, not before. BUG=chromium:959232 Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: I923987ef21a971df9e32ca03f2da4dccdac07843 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-02mb/google/poppy: Declare output GPIOs as pull-downsSakari Ailus
The pull direction is used to determine the initial state of the pin. If no pull direction is specified, the pin will remain as input. Fix this. BUG=chromium:959232 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Change-Id: I1158bc8aaa447b223e8ce25d808348e758de28c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36721 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
Modify DPTF parameters. BUG=b:131272830 BRANCH=firmware-hatch-12672.B TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I93930525edf4c5efb6b73bdfc8f16950754f7c9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37272 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-02mb/google/glados: restore device-specific VBTsMatt DeVillier
When migrating glados (and variants) to FSP 2.0, the older board- specific VBTs were dropped in favor of the default FSP 2.0 VBT due to compatibility issues. Now that libgfxinit is available and the default, restore the board-specific VBTs so that external displays function properly. Select MAINBOARD_NO_FSP_GOP for all variants except glados since FSP/GOP init will not function properly with the older VBTs. Test: build/boot chell and caroline variants w/libgfxinit, verify external displays now work again. Change-Id: If55a67e0d3d78e4acf80cee1733ad8e14b8847d4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-02mb/google/rammus: add libgfxinit supportMatt DeVillier
Add libgfxinit support for rammus. Use panel init values from VBT. Test: build/boot rammus with libgfxinit and Tianocore payload Change-Id: I4775a36d83bd67a0064a162effaf96649e9c186d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-02mb/google/poppy: add VBTs for remaining variantsMatt DeVillier
Add VBT files for Atlas, Nocturne, Rammus, and Soraka variants. Extracted from ChromeOS recovery images for the respective boards. Select INTEL_GMA_HAVE_VBT for all variants except Poppy, since it doesn't have a VBT (or a recovery image from which to extract one). Change-Id: Icba2741e0b7309c22c027f956cd20cec78f34052 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-02src/mb/intel/coffeelake_rvp: Rename COMETLAKE_RVP to COMETLAKE_RVPUGaggery Tsai
This patch renames COMETLAKE_RVP to COMETLAKE_RVPU to avoid confusion. TEST=build an image with COMETLAKE_RVPU Change-Id: I93d7b5cc0be475926bb92503b66797dc67e607f5 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36793 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-30binaryPI boards: Remove BIST reportingKyösti Mälkki
Can be restored with C environment bootblock. Change-Id: I077d7bf088a0ffc65e9ec0d0b1c239194dc4f4ca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37347 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-30binaryPI: Clean leftover romstage prototypeKyösti Mälkki
Change-Id: Ie9e7a88f1f8dce967772e7c5ecf4aea971bb1c3f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37346 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-30AGESA,binaryPI: Flag boards with ROMCC_BOOTBLOCKKyösti Mälkki
Allows boards to be transformed to C env bootblock one at a time. Change-Id: I1cc1910a8bfb6b3495593979cbf7194b0d82c8e1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37345 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-29mainboard/google/kahlee: add G2 TS support for careenaKevin Chiu
Add G2 GTCH7503 HID TS support spec from G2: G7500 / Ver.1.2 (3, April, 2018) BUG=b:141577276 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I91e4f2b934b64b14bca20108037b721288d40942 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37318 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-29sb/amd/{agesa,pi}/hudson: enable support for AMD common ACPIMMIO blocksMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Idd014f1ba85efff0c98a0c5ab60d775ac93cbc60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-29mb/lenovo/t400/Makefile: Build gpio w/o subdir makefilesPeter Lemenkov
Change-Id: Ia2e889fe72d746b71d92026e358c7471f56b381f Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-29mb/lenovo/t400/Kconfig: Remove default data.vbt pathPeter Lemenkov
Change-Id: Ib720d9ca57cf1ce640f168cd6aab654b53e92b82 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-28soc/amd/common: Fix indirect includesKyösti Mälkki
Builds that would otherwise be reproducible are sometimes broken due to added #include combined with __LINE__ used in assert() statement. Change-Id: If4a02393799a34bbae4f6e506052774526c1a969 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37266 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-28mb/*/*/Kconfig: Drop redundant redeclaration of MAINBOARD_VENDORArthur Heymans
Change-Id: Ic92e08ae5b741889a8200d10ea8148e4b4384dc8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37270 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-28mainboard/google: Remove unused include <stdlib.h>Elyes HAOUAS
Change-Id: I9e71474bea61befd61900aff554f32f1bc782a77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-11-27mb/google/hatch/var/kindred: Add ELAN touchscreen supportDavid Wu
Add ELAN EKTH6918 USI touchsreen support. BUG=b:131205495 b:127996093 TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage and check touchscreen work. Change-Id: I8b003685cd7ee68738bcd4298b63a44d6e6118e4 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37236 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-27soc/intel/cannonlake: Disable USB2 PHY Power gatingSurendranath Gurivireddy
Workaround to disable USB2 PHY power gating to fix issue seen when Apple 87W USB-C charger is connected in S0ix state on WHL platforms (based on Intel's recommendation). Issue is seen on CML platforms also. So, disable power gating for Drallion too. Add devicetree entry to set the flag to disable USB2 PHY power gating for different CNL PCH based platforms BUG=b:133775942 TEST=Connect Apple 87W USB-C charger when the system is in sleep and check if the system wakes up after that Signed-off-by: Surendranath Gurivireddy <surendranath.r.gurivireddy@intel.com> Change-Id: I95909c73de758fccc7f616a330c1e1f0667e8c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36519 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-27google/jecht: add libgfxinit supportMatt DeVillier
Tested on Guado variant Change-Id: Ie3a42d1d69d11eebda25e60572f5d9a7452144c2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27google/beltino: add libgfxinit supportMatt DeVillier
Tested on Zako variant Change-Id: I433863b34731584797456eee6c2d270868a4f13f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27google/eve: add libgfxinit supportMatt DeVillier
Change-Id: Id9d9d804dfc2301b8d2186aff7be331d5ddbf18a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27google/fizz: add libgfxinit supportMatt DeVillier
Change-Id: Idd7bfa4a97770f525c3f25f04f90c4bf092e4ae1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27google/glados: add libgfxinit supportMatt DeVillier
Both linear framebuffer and vga text mode verified on chell and caroline variants Change-Id: I106e7bb761055581634176a112816be8447e6745 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27binaryPI: Drop BINARYPI_LEGACY_WRAPPER supportKyösti Mälkki
Drop all the sources that were guarded with this. Change-Id: I6c6fd19875cb57f0caf42a1a94f59efed83bfe0d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/19275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-11-27binaryPI: Disable boards from buildKyösti Mälkki
As per the 4.11 release requirement, CAR_GLOBAL_MIGRATION=n is a mandatory feature, which most binaryPI boards lack as they use BINARYPI_LEGACY_WRAPPER. Disable all binaryPI platforms, except pcengines/apu2, from the build for the time being. If a platform does not reach POSTCAR_STAGE=y and C_ENVIRONMENT_BOOTBLOCK=y within a reasonable timeframe both the mainboard and the respective unused platform support code will get removed. Change-Id: Id81ab0f168034187ecf62203b5a33ac6ba49a35d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-11-27pcengines/apu2: Switch away from BINARYPI_LEGACY_WRAPPERKrystian Hebel
Adopting the mainboard code to use hooks from state_machine.h. No post codes are changed, except for those which were explicitly sent in mainboard/romstage.c. Boot time is reduced by more than 7%, from 5.029s to 4.657s (coreboot timestamps, measured for loglevel 7). POSTCAR_STAGE is required since coreboot 4.11 release. TEST=boot PC Engines apu2 and launch Debian Linux with 4.14.50 kernel Change-Id: Iff3dbe68ac17eb2947ff40b9769c6650255656cf Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-25mb/samsung: remove header guards for SuperIOMatt DeVillier
SuperIO header needs to be included regardless of Kconfig option, otherwise compilation fails due to missing prototype for try_enabling_LPC47N207_uart() if DRIVERS_UART_8250IO is not set. Change-Id: I0eda4aee2cbb114bde33e862940a64675469693d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-25hatch: Enable EC sync in romstageTim Wawrzynczak
Now that the EC software sync in romstage ("early EC sync") patches have landed, it's time to enable this for Hatch. BUG=none BRANCH=hatch TEST=verify EC sync runs in romstage Change-Id: Ie567ab081b95b2302b051812fbf46e183c76bab6 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37025 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-25mb/Kconfig: Add a warning on boards with a ROMCC_BOOTLOCKArthur Heymans
This feature and therefore the boards using it, will be deprecated soon. Change-Id: I1e970dd0613702346b5764d2b56012a72ed62cde Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37155 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-25Drop superfluous C_ENVIRONMENT_BOOTBLOCK checksArthur Heymans
Some guarding is not needed because the linker drops the code, other guarding is not needed because all platforms using the code now have C_ENVIRONMENT_BOOTBLOCK. Change-Id: I3b1a94e709aa291e1156c854874d7bf461981f32 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 20:26:47 +0000