summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2007-10-29Thanks to the great efforts of Morgan Tsai of SiS we support the SiS966Morgan Tsai
southbridge now: From: Morgan Tsai <my_tsai@sis.com> It supports SiS761GX / SiS966 chipset, only for AMD K8 platform so far. Due to integrated VGA sharing system memory, some code in southbridge folder have to init northbridge. Copyright (C) 2007 Morgan Tsai <my_tsai@sis.com> Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) Change Log: Newly support GIGABYTE GA-2761GXDK CPU type: AMD AM2 socket Northbridge: SiS 761GX Southbridge: SiS 966 SuperIO: ITE8716F Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2902 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-26This code gets us to a working linux boot on the alix1c. I have not tested Ronald G. Minnich
Ethernet yet. The fixes are a board-specific fake spd_read_byte, cleaning up comments, and just in general customizing for the 1c. The lxraminit change fixes a bug (&& used instead of ||), adds some debug prints which were VERY useful debugging the alix1c, changes fatal error messages from print_debug to print_emerg, and adds two functions: banner, which just prints out a string with a banner, and hcf, which print an emergency message and then pushes null bytes into the uart forever, just to make sure that no bytes get lost for any reason. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2899 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-26Add support for the AXUS TC320 thin client.Juergen Beisert
This board uses nearly the same devices as the BCOM Winnet100, so most of the new code here is from the BCOM Winnet100. They differ in the IRQ routing table only. BTW: The AXUS board uses standard DIMM memory and can be run at 100MHz SDRAM clock speed (it runs reliably here since month). Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2898 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Some fixes for the BCOM WinNET100, mostly in Config.lb:Uwe Hermann
- Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Ever wondered where those "setting incorrect section attributes forStefan Reinauer
rodata.pci_driver" warnings are coming from? We were packing those structures into a read-only segment, but forgot to mark them const. Despite its size, this is a fairly trivial patch created by a simple search/replace Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-23The s2882 ships with a 1MB rom chip. The targets/tyan/s2882/Config.lb fileWard Vandewege
assumes a 1MB rom chip. Hence the default position for the VGA bios should also assume a 1MB rom chip, not a 512KB chip. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2887 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22Fix typo (trivial)Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2885 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22This is a hack for easier testing of GRUB2 in LinuxBIOSv2Stefan Reinauer
since it is still our most wide-spread codebase. The patch is pretty trivial, and nobody except Torsten even looked at it in a week, so.... Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2880 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17Fix up totally broken Super I/O setup on the MSI MS-7260 (K9N Neo).Uwe Hermann
This has not been working at all until now. With this fix, keyboard, mouse, parallel port, and the Super I/O sensors work fine (tested on actual hardware). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16Completely rip out / replace the ASUS P2B code (which wasn't really working),Uwe Hermann
replacing it with a minimal, but working, framework which will be expanded. Drop a bunch of useless and duplicated files, add missing license headers. I'm self-acking it this time, the diff is a huge unreadable mess and the old code is broken anyway... This code is tested to build fine, and can boot a Linux kernel up to a login-prompt via FILO (IDE). This is verified on actual hardware. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2859 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-11Set the default video memory to 0 MB for all GX1 boards which don't yetUwe Hermann
use that feature in order to not waste RAM. Also, add missing CONFIG_VIDEO_MB for the eaglelion/5bcm, which should fix the build for that board. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2848 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-10This patch adds the CONFIG_VIDEO_MB option to boards thatCorey Osgood
currently don't have it but need it to compile with the new Geode GX1 VGA support. This sets the size at 4MB, which was the size previously defined in the VGA code. Signed-off-by: Corey Osgood <corey.osgod@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2845 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Minor cosmetic changes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-09Add support for the BCOM WinNET100 (used in the IGEL-316 thin client).Juergen Beisert
See http://www.linuxbios.org/BCOM_WINNET100_Build_Tutorial for hardware description and build tutorials. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2843 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-07Add missing '\n' to a printk_debug() and some other small fixesUwe Hermann
while I'm at it (trivial). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-24Various cosmetic changes and coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2804 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-21Fix abuild for the MSI MS-7260 (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-21Add support for the MSI MS-7260 (K9N Neo) mainboard.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2797 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-20The s2891 ships with a 1MB rom chip. The targets/tyan/s2891/Config.lb file ↵Ward Vandewege
assumes a 1MB rom chip. Hence the default position for the VGA bios should also assume a 1MB rom chip, instead of a 512KB chip. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2792 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2787 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Sorry, I mixed up two patches. Reverting this change.Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2786 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-19Add support for a precompressed LZMA payload (trivial).Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2784 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13Fix abuild run of the MSI MS-6178 (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2773 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-13Add a common/global failover.c file which can be used by allUwe Hermann
(or at least most) mainboards. This should put and end to copy-paste'ing the same file again and again for every mainboard. Fix the build for the MSI MS-6178 target (wrong location of the common failover.c file). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-12Add initial support for the Intel 810 based board MSI MS-6178.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2771 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-09Partial changes and fixup.Ronald G. Minnich
Removed reset.c and added copyright headers. Remove debug.c. It is not used and should not be here. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2766 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-08Welcome to PC Engines and the ALIX 1C!Ronald G. Minnich
This is a geode LX board. There are timing settings that are not right yet, we are still trying to get our board to boot Linux :-) Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-12trivial: clarify comment on ADM1026_DEVICE addressPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2738 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-07-12some agami i2c mergesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2735 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-20Artec Group dbe61 mainboard support.Marc Jones
Now uses CAR. New code for SPD-less memory implementation. Updated IRQ routing. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19Various minor cosmetics and coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2727 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19This patch fixes up a couple mistakes I made with the i82810 and mew-vw to makeCorey Osgood
the system boot to a command line. This patch comments out the code to set up the vga framebuffer to allow the system to boot, without this fix the system hangs during elfboot. The only line that is absolutely necessary to change is the SMRAM setup, however I've commented out all vga setup to make it very obvious to both the kernel/payload and anyone looking at the code that vga isn't currently working. This setup might also be better handled in northbridge.c, if it doesn't need to be done before ram init, yet another reason to comment it all. In the future, LinuxBIOS needs to be told that the graphics memory area, 1mb or 512kb (at the user or developer's option), is reserved for the onchip vga, but I'm not sure if it's taken at the top or bottom of the memory, yet. LB may also need to set a base address for the AGP aperture and/or be told that range is reserved as well, whether this was originally the job of the system bios or vga bios is still a mystery. It also corrects the number of entries in irq_tables.c, without this fix the kernel would probably complain and hang due to unmapped IRQs. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2725 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14small agami aruma configuration updates (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2724 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14Fix the static device tree of the ASI MB-5BLMP target. This was broken inUwe Hermann
more than just one way. This version should be (more) correct. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2723 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14This patch adds support for the Intel i82810 northbridge and various i82801xxCorey Osgood
southbridges, along with the Asus MEW-VM. With this, my machine attempts to boot linux, but does so very slowly and fails during the boot process, probably because of the irq tables. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-12Add the AMD DB800 (AKA Salsa) mainboard.Marc Jones
The DB800 is the AMD LX Reference Design Kit platform. For details see: http://www.amd.com/geodelxdb800 Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2718 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-07Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards.Nikolay Petukhov
Both are very similar, thus both use the JUKI-511P target. Linux with patches from Juergen Beisert (http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html) boots and work fine (ide, usb, ethernet, serial, keyboard and sound work normally). Problems: - Filo loads a bzImage only from ide0 (ide1 doesn't work yet). - Video doesn't work, yet. Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2716 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-03Tyan S1846: Minor fixes in static device tree (trivial):Uwe Hermann
- Linux booted with the proprietary BIOS reports 2e.f as PS/2 mouse in the output of 'lspnp -v'. - The floppy on 2e.f was a typo, should have been 2e.e from the beginning. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2709 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-03Fix the static device tree of the Tyan S1846. Especially theUwe Hermann
Super I/O part was incorrect. Also, add ide0_enable/ide1_enable variables, and enable both the primary and secondary IDE interface per default. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2708 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-27Various 440BX and Tyan S1846 related minor changes and fixes (trivial):Uwe Hermann
- Only check the RAM from 0 - 640 KB and 768 KB - 1 MB now. That's available on all boards, regardless of what DIMMs you use. Tested on the Tyan S1846, works fine. - Properly set the PAM registers to allow the region from 768 KB - 1 MB to be used as normal RAM (required for the above). - Document all of this properly. Add/improve other documentation, too. - Simplify and document code in northbridge.c. - Cosmetics and coding style. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2701 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-24Add initial support for the ASUS A8N-E board.Philipp Degler
Signed-off-by: Philipp Degler <pdegler@rumms.uni-mannheim.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-22reverting 2683, NAK by YhLu, patch not necessary.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2688 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-22Add missing license headers, minor cosmetic fixes in existing headers.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2687 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-21Drop the (non-working, almost non-existant) support forUwe Hermann
- the Transmeta TM5800 northbridge - the Densitron DPX114 mainboard (the only one using the TM5800) Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2685 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-21Drop romcc related stuff, as this board only uses CAR.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2684 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-21The Gigabyte m57sli-s4 board supports Rev. F CPUs.Ward Vandewege
Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2683 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-19Fix typos (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2676 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-19Minor cosmetics (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2675 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-19Initialize the fans on the adt7463 chip to be dynamically regulated by theWard Vandewege
hardware, rather than always on at full speed. Set temperature treshold values to safe defaults, rather than the not-so-safe power-on defaults. Signed-off-by: Ward Vandewege <ward@gnu.org> Acked-by: Yinghai Lu <yinghailu@gmail.com> Acked-by: Ward Vandewege <ward@gnu.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2674 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1