summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-01-02mb/**/hda_verb.{c,h}: use denary numerals for codec IDsAngel Pons
Denary, also known as "decimal" or "base 10," is the standard number system used around the world. Therefore, make use of it. Change-Id: I7f2937bb7715e0769db3be8cb30d305f9d78b6f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-01-02mb/ti/beaglebone: Remove unused includesElyes HAOUAS
Change-Id: Ifd1096cdf3700fa24ad8e5a701f48803650767bd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-01-02Replace last uses of read_option() with get_option()Kyösti Mälkki
Change-Id: I63e80953195a6c524392da42b268efe3012ed41b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37953 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-02mb/intel/jasperlake_rvp: Add initial mainboard codeAamir Bohra
This is a initial mainboard code aimed to serve as base for further mainboard check-ins. This is a copy patch from icelake_rvp as on commit ID: I64db2460115f5fb35ca197b83440f8ee47470761 Below are the changes done over the copy patch: 1. Rename "Icelake" with "Jasperlake". 2. Replace "icelake_rvp" with "jasperlake_rvp". 3. Rename "icl" with "jsl". 4. Remove unwanted SPD file, add empty SPD as placeholder. 5. Replace "soc/intel/icelake" with "soc/intel/tigerlake" as tigerlake SOC hosts jasperlake code as well. 6. Empty romstage_fsp_params.c, to fill it later with SOC specific config. 7. Empty GPIO configuration, to be filled as per board. 8. Change copyright year to 2019. 9. Add two board support namely BOARD_INTEL_JASPERLAKE_RVP and BOARD_INTEL_JASPERLAKE_RVP_EXT_EC 10. Replace icl_u and icl_y variant with jslrvp variant. 11. Remove basebord gpio.c and rely on variant override. 12. Remove HDA verb table and config support. Changes to follow on top of this: 1. Add correct memory parameters, add SPDs. 2. Clean up devicetree as per jasperlake SOC. 3. Add GPIO support. 4. Update chromeos.fmd to make 10MB BIOS region. TEST=Build jasperlake rvp board Change-Id: I3314215807959b7348b71933fbba98e6487c0632 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-01-02mainboard/google/puff: Enable net driver on pcie epEdward O'Callaghan
Let coreboot know there is a NIC device on the end so that the mac from vpd is set at early boot. Properly configure the link-leds in devicetree s.t. valid values are written out to the register at initialization. BUG=b:146592075,146999042,146999043 BRANCH=none TEST=Boot to kernel. Insert mac address into VPD vpd -s ethernet_mac=<address> reboot the system. Ensure we have ip address and corresponding mac address with ifconfig. Ensure ethernet controller shows up with lspci. Change-Id: I76ce6d8a5a26842fcb2544ee96567fe0da8603b1 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-31mb/**/acpi: Remove unused filesAngel Pons
Remove commented-out entries in dsdt.asl, and then remove files that do not get built. Change-Id: I579e7ffbc2d6596fd7ffe6863ff3b3fb14b0ade6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-31mb/*/*/acpi_tables: Don't initialize already initialized fieldsPeter Lemenkov
Don't initialize fields with zeroes since gnvs structs were zeroed out in southbridge already. See * src/southbridge/intel/*/lpc.c Change-Id: I5228f2cdc94df722ffa687c45b4e4fd25e82df82 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-31mb/*/*/acpi_tables: Don't zero out gnvs againPeter Lemenkov
The gnvs structure was zeroed out before calling acpi_create_gnvs(...) in the following files: * src/southbridge/intel/*/lpc.c Change-Id: Id7755b1e4b8f5cb8abd1f411b5dc174b6beee21c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37956 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-31mb/hp: Add data.vbt files for folio_9470m and revolve_810_g1Bill XIE
Extracted from live running machines running vendor firmware. Change-Id: I5082af9349c25a5f1759ba00b3fbf8d18f8fde4d Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-31mb/google/atlas: Add libgfxinit supportMatt DeVillier
Add Kconfig, panel delays extracted from VBT (and confirmed by Linux) Test: build/boot Atlas with libgfxinit and Tianocore payload Change-Id: I94c227cd4f020db719bf81118d983493752bb00f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37989 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-31mb/google/peppy: Add Hynix memory HMT425S6CFR6A supportMatt DeVillier
Adapted from Chromium commit b8dcb1a [Peppy: Update Memory IDs] Add Hynix memory HMT425S6CFR6A support. RAM_ID: 011 4GB Hynix HMT425S6CFR6A RAM_ID: 111 2GB Hynix HMT425S6CFR6A Original-Change-Id: I26d5c4ad00509e7823c325ee8391e0b18fee44d8 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1074849 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Original-Tested-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4d165f61b8a13e5ed025e9ddbc4330db88e2fa3d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-31mb/google/peppy: add _DSD to touchscreen ACPIMatt DeVillier
Recent changes to the Atmel touchscreen driver in the mainline kernel broke functionality with devices running upstream coreboot, due relying on another driver (chromeos_laptop) which makes the assumption that the i2c devices are be in PCI mode (as with the stock Google firmware) rather than in ACPI mode as they are in upstream coreboot. Mitigate this by adding the required devicetree property so the Atmel toushcreen driver will correctly attach without the use of chromeos_laptop. Test: build/boot peppy on 4.18+ kernel, verify touchscreen working Change-Id: I05df8367886eef55b409590f75a68d98d4e5fbdf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolò Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-31mb/google/hatch/akemi: modify DPTF parameters for new FANPeichao Wang
New FAN use NTN bearing, so tune DPTF parameters to satisfy requirement BUG=b:144370669 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6fbf0c80cd2421ce9a489c8923a97d860a11b545 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-30ibase/mb899: use common winbond/nuvoton HWM bank select functionFelix Held
Change-Id: I7f159074c25a0fdfe2ee15024c1ed6c062ce75d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-30kontron/986lcd-m: use common winbond/nuvoton HWM bank select functionFelix Held
Change-Id: I169b16c99a864ecff54112bcc073f2c141c2009f Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-28mb/lenovo/*/acpi_tables: Don't initialize already initialized fieldsPeter Lemenkov
Don't initialize fields with zeroes since gnvs structs were zeroed out in southbridge already. Change-Id: I2ccf4699ba3ed3f5b9402c0340153d4a5bf82682 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-27mb/lenovo/*/acpi_tables: Don't zero out gnvs againPeter Lemenkov
The gnvs structure was zeroed out already in the following files: * src/southbridge/intel/i82801ix/lpc.c (t400 and x200) * src/southbridge/intel/i82801gx/lpc.c (thinkcentre_a58) Change-Id: Id7d552e1c4084a0b36b98f9627a85a75c8b90e81 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-27mb/*/*/acpi_tables: Remove unnecessary function callPeter Lemenkov
Remove acpi_update_thermal_table local function. Change-Id: I4857348088feb8eaf1dd7f553c4efb29da8943cf Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-27mb/google/kohaku: Update reset_delay_ms for digitizer deviceSeunghwan Kim
We found the driver binding failure issue could be cleared with 100ms of "reset_delay_ms". Needs further check with device vendor, anyway it seems the IC need some time before communication after de-assertion of reset. BUG=b:129159369 BRANCH=firmware-hatch-12672.B TEST=Verified driver bound successfully. Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-27mb/google/hatch/var/dratini: Add a new sku for dragonairWisley Chen
Add a new sku for dragonair BUG=b:146504217 TEST=emerge-hatch coreboot Change-Id: I4492d65f35d3583df1606c5f2901228b3ae14e4a Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-27mb/*/*/early_init.c: Remove defined but not used macroElyes HAOUAS
Change-Id: I69c3b0b96fde8dc44a961c3d687f5aadbbdddde0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37644 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/hatch: Clean up duplicate methodEric Lai
Moving Enable/disable GPIO clock gating to soc level. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I9be77908b4e44e08a707812fd8b23b23bcb56671 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-26mb/google/octopus/variants/dood: support LTE moduleRen Kuo
related LTE GPIOs: GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:146843935 BRANCH=octopus TEST=build and verify on the DUT with LTE Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: Ief6c993ede2bb4b3effbb05cfe22b7af4fcf7faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/37931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/octopus/variants/bobba: fix LTE power sequence and moveSheng-Liang Pan
get_board_sku to smm stage. fix Power_off section power sequence. power_off_lte_module() should run in smm stage, add variant.c in smm stage. also move get_board_sku() to mainboard_misc.c so that we can use it in smm stage and ramstage. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I287ba1cb092a95b3a9dd1f960a3b84fd85b9b221 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37649 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/octopus: Add two new sku IDs for foobTommie
Declare these sku IDs: -SKU: 1 Foob, 1-cam, no touch, no pen. -SKU: 9 Foob360, 2-cam, touch, pen. BUG=b:145837644 BRANCH=octopus TEST=emerge-octopus coreboot Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Change-Id: Iffcbb3f6f945ea299ff687a383a82b88dcd11ea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/google/hatch/akemi: Set touchpad data hold time more thanPeichao Wang
300ns According to SI team and vendor request, need to tune I2C bus 0 data hold time more than 300ns BUG=b:146163044 TEST=build firmware and measure I2C bus 0 data hold time Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I75e33419cbaef746487de6ee8628d07cf08adaa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37322 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/eve: select SYSTEM_TYPE_CONVERTIBLEMatt DeVillier
select SYSTEM_TYPE_CONVERTIBLE, which properly sets the SMBIOS chassis type, and allows the OS driver to recognize tablet mode capability Change-Id: Ic61659e9fa6f7428afd1f018fb8cb25fe49e8747 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26mb/google/kefka: Add missing SPDMatt DeVillier
Adapted from Chromium commit 9522225e [Kefka: Add memory SPD info for Hynix H9CCNNN8GTALAR-NUD] Add current available ram_id to support Hynix H9CCNNN8GTALAR-NUD spd info. RAM_ID: 0110 4GiB Hynix H9CCNNN8GTALAR-NUD RAM_ID: 0111 2GiB Hynix H9CCNNN8GTALAR-NUD Original-Change-Id: I48386ff3e5f80de94ea87359a09a5ec2577043b5 Original-Signed-off-by: Peggy Chuang <peggychuang@ami.corp-partner.google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/664517 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I0ae76c4d8313246927bbc3f71b21f3611c89a6e3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26mb/google/eve: Update and fix VBTMatt DeVillier
Update Eve's VBT from v211 to v221, and change the backlight control type from PWM to VESA eDP/AUX. This allows the OS to select the proper backlight control type for the panel. Test: Eve backlight control now functional under Windows 10 (Linux requires some pending patches to fix) Change-Id: I8be2a719765891b3f2702c1869981009fa73ca05 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlonWisley Chen
In https://review.coreboot.org/c/coreboot/+/37459 (commit fcd8c9e99e7f70e2b9494f2fa28a08ba13126daa) which moves power/reset pin control of FPMCU to var/board/ramstage, but does not implement it for dratini/jinlon. So, add it in dratini/jinlon. BUG=b:146366921 TEST=emerge-hatch coreboot Change-Id: I1b6dbe4ba0a1242aa64346410beed4152b4f457f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37833 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
The change applies the DPTF parameters received from the thermal team. BUG=b:146540028 TEST=build and verified by thermal team. Change-Id: I222bac5f04ba5cdde1788c6d4ca8af80d323ca98 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-12-26mb/google/octopus/variants/garg: update new SKUKevin Chiu
add new SKU ID below: 19 - Garg PVT (HDMI DB, Touch) 20 - Garg PVT (2A2C DB, Touch) 38 - Garg360 EVT (2A2C DB, touch, no stylues, rear camera) BUG=b:146260545 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: Ic74ce14db7060f3124c1a277eb3625ce0ff0b9f0 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-12-26mb/gigabyte/ga-b75m-d3h: enable superspeed ports for all variantsBill XIE
Unlike other Panther Point boards, the ga-b75m-d3h lacks definitions to wire SuperSpeed-capable ports to XHCI in its devicetree, causing these ports being wired to the second EHCI, and only working as USB 2.0 ports. The missing register definitions are added to fix that. Tested on my ga-b75-d3v board. Change-Id: Ida4de26f1a493ead83065b1ab27c0c684a074513 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-26asus/am1i-a: Switch away from ROMCC_BOOTBLOCKMike Banon
Switching was done by moving a SIO configuration and the clocks setup from 'romstage.c' to 'bootblock.c', following the example of change CB:37719 (fc749b2). TEST=Boots into Artix Linux 2019 without a problem. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I780fa87cb9cb3c45844c388331ef89eb8eb70ebb Reviewed-on: https://review.coreboot.org/c/coreboot/+/37829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-25mb/supermicro/x11-lga1151-series: Remove default devicetree valuesPatrick Rudolph
The same default values are used if the values are not present in devicetree. Change-Id: Ic910cdc8077e1b3e98eadc77a2d1fa0f9cb38e5b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Michael Niewöhner
2019-12-25mainboard/google/puff: Add GPIO configurationEdward O'Callaghan
BUG=b:144809606,142094759 BRANCH=none TEST=none Change-Id: Iae20d2262c910044dde84f10d795f4aee3318532 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Signed-off-by: Kangheui Won <khwon@chromium.org> Co-Author: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37925 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mb/google/hatch/variant/kohaku: Fix Kohaku baseboard/gpio.c mux commentsEdward O'Callaghan
Follow MEM_STRAP_* comment style to be consistent with other boards. BUG=b:144809606 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I4945f676f307af9b8c0baa1fbcaf33113de647c3 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37592 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-25mainboard/google/hatch: Move gpio GPP_H3 config up from baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_H3 gpio config for easier review. This toggles the MAX amp which not all boards have. Move the pin configuration to boards with the respective devicetree configuration following on from the theme of commit b417786525. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: Iefd2223af79a13c8a42d07bc10b2772dbff6d3e5 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_C15 group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I578245e24895d361d80ad016a4f18204e2b6e1ca Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
The baseboard GPIO table definitions are too straineous to the extend that variants need to redefine assumptions back to NC. Invert this so that baseboard by default assumes the safer NC and move the specific board configurations to their respective places. This patch handles the GPP_A* group for easier review. BUG=b:142094759 BRANCH=none TEST=builds Change-Id: I29b4323ac80b1288b2562846217c4f377714fc2c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-24mainboard/variant/puff: set PL values for puffKangheui Won
To be safe for now, don't differentiate between SKUs and use lower values to ensure board won't be browned out. BUG=b:143246320 TEST=none BRANCH=none Change-Id: I041ebaa33bf2582386198290e625099ba8e2f3c9 Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37651 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
Generally work towards a more loose baseboard definition by moving out some original assumptions to be board specifics. Specifically Puff does not have the MAX98357A speaker amp and enabling the driver winds up generating incorrect SSDT tables that confuse the kernel. Since devicetree inherits the chip from device node in base and an override will also inherit the chip and thus dispatch the unwanted fill_ssdt fn call. V.2: lean on linker to drop max98357a driver when not in dt. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I8e7fed69a4c6d9610ac100da6bae147828ebfa81 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37909 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-23mainboard/google/puff: Configure HDA registersEdward O'Callaghan
Enable PCH HDA and configure dmic+ssp registers. BRANCH=none BUG=b:146519004 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If9495261201ca256cdb35352338c0b3a82a50196 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2019-12-23mainboard/google/puff: Enable func0 of 1c for nicEdward O'Callaghan
Two things here: i. ) FSP requires that function 0 be enabled whenever any non-zero functions hang under the same bus:device. ii.) FSP reorders function 6 RP to be function 0 if function 0 is indeed unused. BUG=b:146437819 BRANCH=none TEST=none Change-Id: I0f499a23495e18cfcc712c7c96024433a6181a4c Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20src/mainboard: Remove unused '#include <device/pci.h>'Elyes HAOUAS
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20mainboard: Add missing include <device/pci_def.h>Elyes HAOUAS
Change-Id: I8a7c989540e8b62de7fd291f695adac849f4680c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-12-20mb/google/hatch/var/kindred: Decrease i2c frequency below 400 KHzDavid Wu
Before tuning i2c frequency, I2C0: 479.4 KHz I2C1: 491.4 KHz I2C4: 476.4 KHz After tuning i2c frequency, I2C0: 391.8 KHz I2C1: 396.4 KHz I2C4: 388.8 KHz BUG=b:146535585 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I55d095efb60eba4e860b54bb90e8e0df62d88419 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37831 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-20mb/google/hatch/var/jinlon: Config WWAN_RESETWisley Chen
jinlon supports LTE, so remove WWAN_RESET NC configuration BUG=none TEST=emerge-hatch coreboot Change-Id: Ibc5d21f0a33952f519265a5ce2df559a79346d9e Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37837 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 20:34:18 +0000