Age | Commit message (Collapse) | Author |
|
The RW_LEGACY section needs to be minimum 1M. For the 16MB BIOS
region, we had this region set too small, which was causing the
firmware_FMap FAFT test to fail.
BUG=b:133857135, b:129464811
BRANCH=None
TEST=test_that -b hatch <IP> firmware_FMap
Change-Id: Ie6311613ca3bb08e7f058a41d12f9a1153dc9c5e
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Initial support for Facebook FBG-1701 system.
coreboot implementation based on Intel Strago mainboard.
Configure 'Onboard memory manufacturer' which must match HW.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701
Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Change-Id: I3d743e90444292be687999ab4f50aa89d514fbad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33171
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some variants only support 4 PCIe ports so there is no need to have
those unavailable ports in the devicetree.
Change-Id: I154cae358fb7f862fc0c8eaa620474b37b5e6484
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30821
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:133389422
TEST=check SSD's power off sequence to meet PCIE requirement.
SSD's reset should be cleared before clearing SSD's power EN Pin.
Change-Id: Ia106b805deafb8a442b56bcce91b51135cb32988
Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33182
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's GPIO28 according to schematics.
Change-Id: I55be1ed178c818a17766e22cb2fd010412b8fe02
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Enable LTR for NVMe and WiFi PCIe ports so that they can use ASPM L1.2
BUG=b:134195632
TEST=Verified L1 substate with lspci on hatch:
Before: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+
After: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
Change-Id: I7fce60897b78dde12747ac7fb857c988d16118ab
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33161
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting up the SIO serial console is done in the bootblock.
Change-Id: Ideaf8f3dc0ee067e96d3fb5046071551c6d45329
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32985
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is possible that cbfs_boot_map_with_leak() and malloc() could fail,
so detect those conditions and print error messages if they do.
Change-Id: I34951da0b73028c4c89446cb1779a72422997325
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1399147
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Xiang Wang <wxjstz@126.com>
|
|
This fallthrough is intentional (see commit 2257a35862 - Perform PL2
setting for syndra), so add a comment to make that explicit.
Change-Id: I57fe1e08f59aed12544cd2a71f1e0464f432f03b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1397063
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This code to handle the brightness from SMM is copied from the Lenovo
Thinkpad X60 code, but does not work on later generation. The PCI
device it tries to address does not even exist on those devices.
Change-Id: Ia959eb5b747846048396e66d4c926c96c27f3878
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33138
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code was already orphaned since its hook-up was removed
with a6be58fece (nb/intel/sandybridge: Remove the C native
graphic init).
Change-Id: Ia554c457e2f3a2dc42965ac5cded0be8e82311fb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
All Baytrail boards have the same GPU PCI ID, so set it
here to avoid having to set it in each board's config.
Move the VGA_BIOS_FILE config from google/rambi into soc/baytrail
since it likewise applies to all Baytrail boards.
Change-Id: Id1e0580b55e3590d868cb839987f06c49bb07cf5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33026
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Buddy's WLAN ACPI code was equivalent to, but formatted
differently from the other auron variants. Since only
differnce is root port used, have buddy use common
WLAN ACPI and use preprocessor guards to set the root
port correctly.
Test: build/boot Buddy, verify Windows 10 boots
without ACPI BIOS ERROR.
Change-Id: I78d994f2bb3981d4d10cb534cd6e0ae673f73527
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30523
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable support for Gigadevice spi-nor flash.
Change-Id: I340eb3bf77b25fe3502d4b29ef4bf7c06b282c02
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ic282daf10dad42bc4513cc55f15ce80a4bd316a5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Helios as a variant of Hatch.
BUG=b:133182138
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
attempts to build a Helios target.
Change-Id: I64ba06932eb0ee32405f7b14a94971a64c8fce71
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32918
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Created helios (hatch variant). Currenly copied from kohaku. Helios-
specific changes will come later.
BUG=b:133182138
BRANCH=none
TEST=none
Change-Id: I9d151621a1c42e6f3cadb288f7ea476828c059b5
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
Create the Kindred variant of Hatch by taking a copy of the Hatch files
as placeholders. Kindred-specific changes will happen in future CLs.
BUG=b:133181366
BRANCH=NONE
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_KINDRED
Change-Id: I09ad3da0505d599fc3797d7fa24b4dc170dcd18b
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
These boards don't need a default FMAP. Moreover, having a default FMAP
disables automatic integration of optional regions like `CONSOLE`.
Also, these files contain an error: `COREBOOT` isn't placed at the top
of the image. Resulting in default builds without a reset vector ;)
Change-Id: If6331e19955034c02828e88902a5934c34d3e784
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33110
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <stdint.h> and <stddef.h>.
So when <types.h> is included, <stdint.h> and/or <stddef.h> is removed.
Change-Id: I3b1a395cfe8b710fb6b468e68f4c92e063794568
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
|
|
This gets rid of the boilerplate back and forward calls between the
SOC/FSP-driver code and mainboard code.
Change-Id: I5d4a10d1da6b3ac5e65efd7f82607b56b80e08d4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32961
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also adapt all users of these symbols
Change-Id: Ibf924a283d438de49a93ce661b0d9ca1a81cd6d1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
When clapper was upstreamed, the devicetree was pulled from
the wrong firmware branch, leading to some incorrect settings
and touchpad, touchscreen, and audio not working.
Correct devicetree settings using Chromium branch firmware-clapper-5216.199.B
Test: build/boot google/clapper, verify touchpad/touchscreen/audio
functional under Linux (GalliumOS 3.0/kernel 4.16.18).
Change-Id: Iacfce575a054b1f484149f36d0aa83d20d034d8a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Legacy Google mainboards (pre-Skylake) shipped with the
SMBIOS manufacturer set to GOOGLE, which many Linux drivers
rely on for application of DMI quirks. Set it as the default
to avoid having to do so for each board's config
Change-Id: I61b0217f3535852d7d6e24a1ac78075c20c0825a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ib863e23863ba6d7504b6c4d32de2f1fea4e57fec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The Gigabyte GA-B75M-D3H/D3V mainboard trees share a lot of duplicate
code, and can serve as a base for porting other Gigabyte 7 series
motherboards. Switch the Gigabyte GA-B75M-D3H/D3V mainboard trees to a
variant setup, defining ga-b75m-d3v as a variant of ga-b75m-d3h.
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: Ia175207a2568aefe1aa9bd8d4d990de6a26f1657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use the mainboard post code hook to inform the wilco EC driver of the
every stage.
BUG=b:124401932,b:133466714,b:133600566
BRANCH=sarien
TEST=Remove DIMM module, confirm diagnostic LED pattern for memory
failure (2 amber, 4 white).
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: Ic71e4a6e62b63ca2fd189957c4d6f49b61b934de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Even fingerprint device probe failed on non-fingerpint boards,the CRFP driver
still register the device that cause the GPE#1 as wake source every time.
Override devicetree for non-fingerpirnt variants to avoid unexpected wake
event(GPE#1).
BUG=b:129650040
BRANCH=firmware-nami-10775.108.B
TEST=Boots to OS and check no GPE#1 wake event from eventlog when S0ix exit.
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Change-Id: I6fa96e04a34e296889414b96a8c604fc61b8a236
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33017
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Due to we turn off SSD power in S5. CB:32952
Based on M2 spec we have to turn on SSD power
before RST assert.
BUG=b:133389422
TEST=verify warm boot and cold boot are boot
successfully.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I5b78bab4be675bbb8795361bcfa5af52cb54bb1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Turn off SSD power in S5.
BUG=b:133389422
TEST=measure H13 is low in S5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I40b5381cac33b0eac962a7730ee5c57e60e6d375
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Modify reset delay to 20ms of touchscreen to address
i2c hid driver rebind failed issue after auto update of
touchscreen firmware
BUG=b:132211627
TEST=Touchscreen works after auto update and no re-bind
driver failed issue
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: If17afbd160a2c97beb69d0cb50e4a7dc654775f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
TODO in followup patch: Some not mainboard specific things should be
moved out of mainboard_smi_apmc.
Change-Id: Ifc2d8f7755ace598e66b162d071d472093e4656e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This adds a file i82801gx/bootblock_gcc.c since other targets that
don't yet C_ENVIRONMENT_BOOTBLOCK still use the romcc compiled
bootblock.c.
Tested on Foxconn D41S.
Change-Id: I7e74838b0d5e9c192082084cfd9821996f0e4c50
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Unify thermal handling across Lenovo boards (except g505, which is
different). Namely, do the following:
* Move thermal levels from acpi_tables to thermal.h (and create if
necessary).
* Don't use board-specific ifdef guards.
* Set thermal levels using dedicated acpi_update_thermal_table function
as almost all Lenovo boards do.
* Update list of authors in comments. Merge all author's entries.
* Minor whitespace and formatting.
This makes diff -ruw between the Lenovo boards smaller.
Change-Id: If569f67c932b7fbf14893b890a5588df4994daeb
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29659
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are indeed two temperature sensors hooked up to the EC, but they
are indexed as 0 and 1, not 1 and 2.
BUG=b:132999028
TEST=Boot hatch with hardened EC, observe no more index overflows
Change-Id: Ia7f503bc1dc941635db52fce40f217bf34da6d2b
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Required for automatic onboard device detection in the next patch.
Change-Id: I3087de779faf8d006510c460b5372b22ae54b887
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32909
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add VBT
* Configure OnBoard NIC
* Add documentation
Change-Id: Iad739b4e1dacb41f5f63247150951df7013bbf0c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use the mainboard post code hook to inform the wilco EC driver of the
latest boot stage.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
TEST=Remove DIMM module, confirm diagnostic LED pattern for memory
failure (2 amber, 4 white).
Change-Id: If5bf69365d8be3bdbd433f305c85848206ded7b0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32937
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Works:
- bootblock, romstage, ramstage
- Serial console UART0, UART1
- SPI flash console
- iGPU init with libgfxinit
- LAN1, LAN2
- USB2, USB3
- HDMI, DisplayPort
- eMMC
- flashing with flashrom externally
WIP:
- Documentation
- VGA
For some reason Seabios can not find the CBFS region
and therefore it can't load seavgabios, but generally
it is working as soon as Linux is booted.
- ACPI
Works not:
- Devices needs proper configuration
- Seabios can't find CBFS region
Untested:
- GPIO pin header
- 60 pin EXHAT
- Camera interface
- MIPI-CSI2 2-lane (2MP)
- MIPI-CSI2 4-lane (8MP)
- SATA3
- USB3 OTG
- embedded DisplayPort
- M.2 slot
- mini PCIe
- flashing with flashrom internally using Linux
Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This commit creates a garg variant for Octopus. The initial settings
override the baseboard was copied from variant bobba.
BUG=b:132668378
BRANCH=master
TEST=emerge-octopus coreboot
Change-Id: I9a36bc5dc3d2b891b1bce86015aa264894d1434b
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
Currently, GPP_H0 gpio input rout is set to GPI_INT.
So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree
This change also aligns hatch's setting.
BUG=b:131742713
TEST=headset is working
Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ben Kao <ben.kao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tested:
- Ethernet NIC
- Wifi RFKill
- USB
- LVDS, VGA with libgfxinit
- Booting with dock attached (COM1)
- Keyboard, trackpoint
- SeaBIOS 1.12
- S3 resume
- Tested in descriptor mode, with vendor FD and ME
- Add VBT to ACPI OPregion
Untested:
- SATA (likely works)
- Trackpad (my cable is broken, likely works)
- Displayport (likely works)
- Descriptorless mode
- DVD drive
- Extra battery
- model with ATI GPU
Does not work:
- Dock hotplug
- Quad core CPU (hangs during AP init, probably needs hardware mod)
- Hotplugging the expresscard slot (works with 'echo 1 | sudo tee
/sys/bus/pci/rescan')
TODO:
- proper dock support
- documentation
note: This board was hard to flash, I had to desolder the flash.
TESTED: on a R500 with an Intel iGPU, SeaBIOS 1.12, Debian 9,
Linux 4.9 from USB
Change-Id: I9e129b2e916acdf2b8534fa9d8d2cfc8f64f5815
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
All variants (t400, r400, t500, w500) use the same OPROM for the IGD.
Change-Id: I1b9db7b29b22809542f80f60a5e2eb3283fe1c02
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
sarien/arcada:
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration
GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM.
hatch:
GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration
GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM.
BUG=b:130764684
TEST=H1 TPM interrupt working find and able to boot from fixed boot media
Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration.
GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM.
BUG=b:130764684
TEST=H1 TPM interrupt working find and able to boot from fixed boot media
Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD Brazos boards [1]:
> As per the ACPI specification, there are two types of power button
> devices:
> 1. Fixed hardware power button
> 2. Generic hardware power button
>
> Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
> is not set in FADT by the BIOS. This device has its programming model
> in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
> power button device by default if the power button FADT flag is not
> set.
>
> On the other hand, generic hardware power button can be used by
> platforms if fixed register space cannot be used for the power button
> device. In order to support this, power button device object with HID
> PNP0C0C is expected to be added to ACPI tables. Additionally,
> POWER_BUTTON flag should be set to indicate the presence of control
> method for power button.
[..]
> This change gets rid of the generic hardware power button from all
> google mainboards and relies completely on the fixed hardware power
> button.
The same problem exists with the AMD Hudson devices in coreboot.
For AMD Hudson (2) and Yangtze based devices this was removed in commit
44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power
button) [2].
Two devices are detected.
$ dmesg | grep Button
[ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.209254] ACPI: Power Button [PWRB]
[ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.209349] ACPI: Power Button [PWRF]
$ sudo evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
[..]
[1]: https://review.coreboot.org/5546
[2]: https://review.coreboot.org/27272
Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The system should boot fine to OS on pressing power button before the
system enters G3. However, on hatch, we observe that the system waits
for few seconds at "Starting kernel" and then resets, with SD card tray
inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD#
pad reset config to PLTRST.
BUG=b:129933011
TEST=Built and verified on hatch.
Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
New emmc DLL values for Casta
BUG=b:122307918
TEST=Boot to OS on 12 systems
Change-Id: Ie51885fb9628fa093ecc38f4a3f3157f751ca9ab
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Set the system serial number from the VPD key "serial_number" and
the mainboard serial number from the VPD key "mlb_serial_number".
BUG=b:132970635
TEST=check serial number is set in SMBIOS based on VPD, and if there
is no VPD key found then it is empty.
Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|