summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2014-03-08qemu-i440fx: add a prototype for main()Patrick Georgi
This probably belongs elsewhere, but I haven't found a nice place yet. Change-Id: I9ca52db33905cf4ee229d7ff44012105915271a8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04pl011 UART: Move under drivers/uartKyösti Mälkki
Currently this is only a minimal stub to get console on qemu-armv7. Change-Id: I3f20b7f944bc7d0e5ace9d22198d4c16a3839d2c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5162 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Drop HAVE_UART_MEMORY_MAPPEDKyösti Mälkki
This option is used to make uart8250mem option visible in menuconfig. Showing it for these ARMs is incorrect. Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5259 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04jetway/nf81-t56n-lf: Minor corrections to devicetree.cbEdward O'Callaghan
The miniPCIe ports hanging off 15.0 are infact x1, as are the two onboard NIC's on 6.0 and 15.0. Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5328 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04jetway/nf81-t56n-lf: Fix PS/2 ACPI for KBC & Mouse.Edward O'Callaghan
Provide ACPI table node so that the PS/2 keyboard/mouse port works in GNU/Linux. Change-Id: If73b8d37a81bb9066cbcc650b518d25e243b84e7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5327 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04nehalem: Replace video init.Vladimir Serbinenko
Old video init just replayed the sequence. This one actually computes the values. Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5270 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03qemu: Support textmode gfx init.Vladimir Serbinenko
Change-Id: I8b6b14b4fcf8df21d8bbf988d640b1efa013bd7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5283 Tested-by: build bot (Jenkins) Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03nehalem/raminit: Don't touch clock generator in raminit.Vladimir Serbinenko
Clock generator is mobo-specific. Don't touch it in raminit. Change-Id: Ie114696b7fb13b8daee8dd1393d43bc609e149b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-01lenovo/x60: Unify volume button handling with common code.Vladimir Serbinenko
Change-Id: I45fe44a91f9f83a510b204e01dbaff9e8a9696ca Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5099 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-01lenovo/x201: Move mainboard init to mainboard_init.Vladimir Serbinenko
Rather than having it inside mainboard_enable. Change-Id: Ie8bd25eb49b919b4e25c4628e3557fc66b2ba4d9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4840 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
The callers of the following functions assume the storage area provided by the pointers is initialized. That's not the case as these were just place holders. - void acpi_create_intel_hpet(acpi_hpet_t * hpet); - void acpi_create_serialio_ssdt(acpi_header_t *ssdt); To fix this properly initialize the hpet entry, and just remove the serialio_ssdt function entirely. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted through depthcharge on rambi. Noted no more ACPI errors relating to invalid length. Change-Id: If56ab033562ef2d755e9c9de42f507c95d291aba Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174716 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4917 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27rambi: Enable internal keyboardDuncan Laurie
The EC LPC init function needs to run to enable the internal keyboard. I needed this to confirm that it is just USB keyboards that are causing all sorts of issues. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=boot to recovery screen and hit tab Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175207 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4915 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: Enable SATA portShawn Nematbakhsh
Enable first SATA port in Rambi device tree. BUG=chrome-os-partner:23643 TEST=TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and kernel is found + booted. Change-Id: Ic0cb5f9ff17ca0f6cc7941f203b9338df200811d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174916 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4914 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: add all on-board devicesAaron Durbin
Add the on-board devices in the SoC to the device tree. Also, disable the unused devices aside from TXE and HDA. Those particular devices cause the system to shut down when they are disabled. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Noted the calls to the southcluster disable function. Change-Id: I482c1c9609833054aeb2948144af54b57d3df086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174645 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4912 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82, speedup by CACHE_ROM is reduced a lot. On the other hand this makes coreboot run out of MTRRs depending on system configuration, hence screwing up I/O access and cache coherency in worst cases. CACHE_ROM requires the user to sanity check their boot output because the feature is brittle. The working configuration is dependent on I/O hole size, ram size, and chipset. Because of this the current implementation can leave a system configured in an inconsistent state leading to unexpected results such as poor performance and/or inconsistent cache-coherency Remove this as a buggy feature until we figure out how to do it properly if necessary. Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-24rambi: add chromeos EC supportAaron Durbin
As rambi has the ChromeOS EC on it the EC needs to be configured properly. Do this along with updating the ChromeOS support for passing on write protect state, recovery mode and developer mode. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted to depthcharge. EC software sync appears to work correctly. Additionaly, 'mainboard_ec_init' appears in the console output. Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174714 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24jetway/nf81-t56n-lf: Use proper category.Vladimir Serbinenko
"Mini-ITX" was a pure inventional name for category called "mini". Change-Id: I6450fd27c1a7679f252ce7f46f409b7dc459c50d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5286 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-20nehalem: Make SPD address map into parameter.Vladimir Serbinenko
It's mobo dependent. Change-Id: I7a9ba0fb7374a61178e9282acd8f10098435f1fd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5253 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-17rambi: Set VBOOT_RAMSTAGE_INDEX to point to ramstage imageShawn Nematbakhsh
The ramstage image is the third image in the partition (after ECRW hash and depthcharge image). TEST=Manual. Boot rambi, verify that ramstage image is correctly found: "RW ramstage image at 0xffb1dc70, 0x0000f391 bytes" BUG=None. Change-Id: I628db3daf0b109106c51693960487a0c83b4e9f4 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4899 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-17lenovo/x201: Fix wrong declaration in devicetree.cbVladimir Serbinenko
Change-Id: I90c6ff14ab819368ccc874008a7fb1410a543984 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5255 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17vortex86ex: Drop baudrate programming for 10 UARTsKyösti Mälkki
This is responsibility of end-user application. When coreboot does it, it is only for the purpose of debug console. Change-Id: Idbbf9528c60b9b819b7bea9dfe84078a3f055bc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5251 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrew Wu <arw@dmp.com.tw>
2014-02-16intel/jarrell: Fix missing includeKyösti Mälkki
To unconditionally get cmos_read(). Change-Id: I0af0e85c8a1f42113bd32b51c4e29e86b3c28112 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5228 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-16rambi: add BSP lapic deviceAaron Durbin
There's some baked in assumptions internal to coreboot that the BSP's cpu device exists in the device tree. Therefore provide one in the device tree. BUG=chrome-os-partner:22862 BRANCH=None TEST=Compiled and booted with other changes. Change-Id: I22ba10964760ee8efbc5bbd5d4ce65daf31b3839 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173702 Reviewed-on: http://review.coreboot.org/4887 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16rambi: disable internal pullups on ram_id[2:0]Aaron Durbin
The ram_id[2:0] signals have stuffing options for pull up/down with values of 10K. However, the default pulldown values for these pads are 20K. Therefore, one can't read a high value because of the high voltage threshold is 0.65 * Vref. Therefore the high signals are marginal at best. Fix this issue by disabling the internal pull for the pads connected to ram_id[2:0]. BUG=chrome-os-partner:23350 BRANCH=None TEST=Built and checked that ram_id[2:0] is properly read now. Change-Id: Ib414d5798b472574337d1b71b87a4cf92f40c762 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173211 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4885 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16Jetway NF81-T56N-LF [2/2]: actually implement mainboard support.Edward O'Callaghan
Step 2: change the Persimmon code to adapt it to the new board's hardware. The NF81-T56N-LF is a IPC form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) APU - 2x SO-DIMM sockets for DDR3 800-1066 SDRAM (Fixed at 1.5V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0/1.1 ports - 5x SATA3 6Gb/s, 1x mSATA socket - 6-Channel HD Audio (via VIA VT1705) - PCI and ISA (via ITE IT8888)?? - NEC uPD78F0532 microcontroller on I2C ("SEMA")?? - 2x RJ45 GbE (via Realtek RTL8111E x2) - Fintek F71869AD Super I/O - PS/2 KB/MS port - RS232 header (via Unisonic UTC 75232 RS232 driver/receiver) - GPIO header - CIR header - 1x MXIC MX25L1606E (SO8, soldered) 16 Mbit SPI flash (BIOS) Note: MX25L1606E is 16Mbit, 8bits in a byte, so 2MB. Jetway *lies* claiming the SPI flash is 16MB. They also use red pen over the chip so you wont see this deceit. Change-Id: I03ccc58bc782e800aeef0d19679ce060277b0c04 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4801 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-16Jetway NF81-T56N-LF [1/2]: create board by forking AMD PersimmonEdward O'Callaghan
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Change-Id: I23e223049ed1c69e320e6b31efe4266bfeb97207 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4800 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-16lenovo/x60: Change to common EDID framework.Vladimir Serbinenko
Currently lenovo/x60 gfx init provides vbe_mode_info_valid in incompatible way. Use EDID framework as do other inits. Change-Id: I887abd5a09064f26f473a2bf9caa2eb33e269c07 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5238 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-16lenovo/x60: Fix EDID byte-swapping.Vladimir Serbinenko
Change-Id: I75305ff7c5a8ba6142ef460e813acc014d9992bb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5249 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-14google/rambi: Do not select CHROMEOS in KconfigAlexandru Gagniuc
CHROMEOS is the meant to be selected by the user. The correct variable for a mainboard to select is MAINBOARD_HAS_CHROMEOS. This will then default to a CHROMEOS build, but when the mainboard selects CHROMEOS, the user can no longer disable CHROMEOS. Change-Id: I78fb15a0a9fef733e2de064d6c09cf774b7bce78 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5218 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2014-02-12google boards: Do not hardcode location of spd.binAlexandru Gagniuc
spd.bin can reside anywhere in CBFS, and we only use CBFS APIs to access and read it. As such, there is no need to hardcode it, and it can collide with mrc.bin or mrc.cache on some boards. Do not use a specific position for spd.bin, but instead let cbfstool find the optimal placement. Change-Id: I496094d3c0de708813494095b7ac4be8addb4112 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/5210 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-12falco: Add ACPI code to describe the I2C touchpad deviceDuncan Laurie
If the SerialIO devices are put into ACPI mode then it is possible to use ACPI to instantiate the touchpad in the kernel without needing to have a platform level driver to do the binding. This is the "new way" of describing on-board I2C devices and the upstream kernel is starting to add ACPI IDs to drivers so they can be used in this fashion. For the Cypress touchpad use a generic ACPI ID of "CYPA0000" to describe it. In order to support the proper scoping of the touchpad device under the appropriate I2C controller device the mainboard.asl file needs to be included after pch.asl so the I2C device exists. Change-Id: I81e053d27be478f3a19b6f9b13cd2b4fabcb88c0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5194 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-12hp/dl145_g1: Add missing copyright notesOskar Enoksson
Missing copyright notes added. Change-Id: I55b320a169b1125017c63b7a2384078465e7ce6e Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5188 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-12hp/dl145_g1: Fix some commented out codeOskar Enoksson
Some out-commented code contained variables which changed name. This commit fixes the "problem". Change-Id: I8d9168c9f4b2cb6810b3e4dfeff2155f3c08357d Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5187 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-11hp/dl145_g1: Add HAVE_HARD_RESETOskar Enoksson
This platform has a hard reset button Change-Id: Ic4d2f9382b6770654eea8842a37ad38cf12de459 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5097 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-11hp/dl145_g1: Adding FID/VID and Powernow ACPIOskar Enoksson
Add cool-n-quiet functionality which allows the OS to dynamic alter CPU voltage and frequency change in order to save power e.g. when the CPU load is low. Change-Id: I4c895a56bcf571d4276af192aeef87d120143063 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5186 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-02-11rambi: Add platform GPIO configuration tablesShawn Nematbakhsh
Configure GPIOs according to function on board. TEST=compile only. BUG=chrome-os-partner:22863 Change-Id: Ic38eeb64149606f2d7a19cc7a0144cc7e24807b8 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172657 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4875 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11rambi: Add ncore GPIO config tablesShawn Nematbakhsh
gpncore config tables were previously missing -- add them. Also, make the baytrail GPIO/PAD LUTs easier to read. TEST=Manual. Build + boot on bayleybay. BUG=chrome-os-partner:22865 Change-Id: I49a1b23c7ad4fb5f4c86618e8c78ea9a1a42f79d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172510 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4874 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11rambi: add per-sku SPD supportAaron Durbin
There are currently 4 SKUs: 0b000 - 4GiB total - 2 x 2GiB Micron MT41K256M16HA-125:E 1600MHz 0b001 - 4GiB total - 2 x 2GiB Hynix H5TC4G63AFR-PBA 1600MHz 0b010 - 2GiB total - 2 x 1GiB Micron MT41K128M16JT-125:K 1600MHz 0b011 - 2GiB total - 2 x 1GiB Hynix H5TC2G63FFR-PBA 1600MHz Add each of the 4 spds to the build, and use the proper parameters to MRC to use the in-memory SPD information. BUG=chrome-os-partner:22865 BRANCH=None TEST=Built. Noted 1024 bytes of SPD content. Change-Id: Ife96650f9b0032b6bd0d1bdd63b8970e29868365 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172280 Reviewed-on: http://review.coreboot.org/4872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-11hp/dl145_g1: Adding ACPI supportOskar Enoksson
Basic ACPI support for this old platform. Created by copying and tweaking similar motherboard ACPI implementations in coreboot. Works reasonably well under Linux, providing HPET-timers and more under linux (tested under OpenSUSE 12.2 kernel 3.4.63-2.44). Not tested under Windows. Change-Id: I69431be962a0d272db398ecf4ac9f0249de8ebab Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/5185 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-06ARMv7: Remove static CBMEM allocationKyösti Mälkki
The calculations for static allocation are no longer valid. Change-Id: I6740cdcec789abddf78485a0edaf24882ef8c2a5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4569 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-02-06console: Drop extra uart_init()Kyösti Mälkki
This call is already in console_init(). Change-Id: Ie0cb3595af514e37efac5ac5d474f52ba551bf22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5140 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06uart8250: Drop unused declarationsKyösti Mälkki
Change-Id: Ie915ef9dbc45604bd5ca1b610acb12af634fdebe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5138 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-06MTRR: Mark all prefetchable resources as WRCOMB.Vladimir Serbinenko
Change-Id: I2ecfd9733b65b6160bc2232d22db7b16692a847f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-05lenovo/x201: Enable flash prefetching.Vladimir Serbinenko
Speeds up coreboot and especially payload load. Before: 90:load payload 4,530,979 (17,728) 99:selfboot jump 5,103,408 (572,429) After: 90:load payload 4,390,051 (14,849) 99:selfboot jump 4,505,966 (115,915) Change-Id: I45c3042594cda16ab3adde6472e00ec1b2d2a688 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5145 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-05mainboard/google: add initial rambi mainboard supportAaron Durbin
BUG=chrome-os-partner:23121 BRANCH=None TEST=None Change-Id: I283415be326e2d92e1e1bf7866954f17a7266edb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171940 Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4865 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-04pcengines/alix2c: Add ALIX.2C as a clone of ALIX.2D.Vladimir Serbinenko
According to vendor (Pascal Dornier) they're the same from coreboot perspective. Change-Id: I43aeb77f21c251b3d9c5c2dcfa01d4d1de0bc87b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5114 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-03lenovo/x230: Enable msata port.Vladimir Serbinenko
Port 2 is used by msata. Enable it. Change-Id: Ib75227f64c9d77f6cfca1902a78d63b5cdd23d76 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4789 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-01lenovo/x201: Skip AT24RF08 detection.Vladimir Serbinenko
AT24RF08 was inherited from RE of original BIOS. As we don't really care if the chip in question is really AT24RF08 or a generic replacement, we can skip this check. Change-Id: I862dd66b2332314beb835f215f1c1cd838aa07b9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4769 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-01pcengines/alix6: Make clone declaration in line with other clones.Vladimir Serbinenko
Change-Id: I4e56f6b37314bff569728b732b4115fb940f70dd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4756 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 18:54:52 +0000