summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-10-04mb/intel/{galileo,wtm2}: Use macro instead of magic numberElyes HAOUAS
Change-Id: Ib8a08e9f854b2b0786c69943d6dbb66abe3ad4d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33438 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
The SPI flash component requirement for Kukui family is 8M so we should update FMAP for that: - Add more comments for alignment and size recommendation. - Enlarge RO to 4M, and RW_SECTION_{A,B} both ~1.5M. - BOOTBLOCK: 32K->128K, aligned with other ARM boards. - Preserve RW_DDR_TRAINING for new calibration. - Reorder the sections for better alignment. - RW_MISC to contain RW sections that should be merged when creating AU image. BUG=b:134624821 TEST=Built Kukui image and boots. dump_fmap -h image-kukui.bin: # name start end size RW_LEGACY 00700000 00800000 00100000 RW_SHARED 006f7000 00700000 00009000 RW_UNUSED 006f8000 00700000 00008000 SHARED_DATA 006f7000 006f8000 00001000 RW_SECTION_B 00580000 006f7000 00177000 RW_FWID_B 006f6f00 006f7000 00000100 FW_MAIN_B 00582000 006f6f00 00174f00 VBLOCK_B 00580000 00582000 00002000 RW_MISC 00577000 00580000 00009000 RW_ELOG 0057f000 00580000 00001000 RW_DDR_TRAINING 0057d000 0057f000 00002000 RW_NVRAM 0057b000 0057d000 00002000 RW_VPD 00577000 0057b000 00004000 RW_SECTION_A 00400000 00577000 00177000 RW_FWID_A 00576f00 00577000 00000100 FW_MAIN_A 00402000 00576f00 00174f00 VBLOCK_A 00400000 00402000 00002000 WP_RO 00000000 00400000 00400000 RO_VPD 003f8000 00400000 00008000 RO_SECTION 00000000 003f8000 003f8000 RO_FRID 003f7f00 003f8000 00000100 GBB 003f5000 003f7f00 00002f00 COREBOOT 00021000 003f5000 003d4000 FMAP 00020000 00021000 00001000 BOOTBLOCK 00000000 00020000 00020000 Change-Id: Id342d57dc95c6197d05b8a265742a2866c35ae09 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-04mb/facebook/fbg1701: Remove ONBOARD_MICRON_MEMFrans Hendriks
ONBOARD_MICRON_MEM and ONBOARD_SAMSUNG_MEM are available. These are used to determine if Samsung or Micron onboard memory is assembled. This can not detected run-time. Choice is replaced by one config. Only oldest HW revision contains Samsung module, so set CONFIG_ONBOARD_SAMSUNG memory to default No. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: Id65e92bd4b8d4fe3a6b87dec9bf77e3a62e1be96 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04mb/facebook/fbg1701: Add measured boot supportFrans Hendriks
No support is available in mainboard. Add support to mainboard: - Add mb_log_list[] - Add routine mb_crtm() BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 Change-Id: I5120ffb6af0b41520056e1773f63b7b2f34a2460 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-10-04mb/facebook/fbg1701: Add verified boot tablesFrans Hendriks
The vendorcode for verified boot is uploaded, but not used by a mainboard. Add support to the mainboard for verified boot. The items to be verifed are placed in board_verified_boot.c BUG=N/A TEST=Boot Embedded Linux 4.20 and verify logging on Facebook FBG-1701 rev 0-2 Change-Id: I3ea0a95287977df0dea13e05acedd5406538a6ee Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33463 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-03mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPIMartin Roth
Previously all boards using eSPI for the Chrome EC just called it LPC as the code for the chrome EC is the same between the two busses. I'm adding a new Kconfig symbol to specify eSPI, so switch the boards that actually use eSPI to that symbol and add the LPC symbol to all the others. The EC_GOOGLE_CHROMEEC_LPC symbol will no longer default to enabled for x86 platforms, so one symbol or the other needs to be specified for each platform. BUG=b:140055300 TEST=Build tested only. Change-Id: Icf242ca2b7d8b1470feda4e44b47a2cdc20680f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-03mb/facebook/fbg1701/devicetree.cb: Use 64MB framebuffer sizeFrans Hendriks
Connected 4K monitor is not configured at max resolution. The framebuffer size is too small. Increase the framebuffer size to 64MB. This is sufficient for max configuration of 1 HDMI monitor combined with internal LCD panel. BUG=N/A TEST=4K HDMI monitor and LCD working fine on Facebook FBG-1701 Change-Id: I25d2cd696830fc5bda84ea2b87538f526373998e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-03mb/facebook/fbg1701: Add mainboard_read_pcb_version()Frans Hendriks
PCB version is determined using inb() in actual code. Create function mainboard_read_pcb_version to read pcb version. BUG=N/A TEST=Boot and verified on Facebook FBG-1701 Change-Id: I7c16627f468d84ca4ad2aab8bf9fb555f50dc23c Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-02mb/google/drallion: Disable GBE in firmware for drallion variantsThejaswani Putta
BUG: None TEST: Build successful, checked the CBMEM log if 1f.6 is disabled with this patch Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.corp-partner.google.com> Change-Id: I4e74b259ce8f5f70833dce94692dcbe33e8504db Reviewed-on: https://review.coreboot.org/c/coreboot/+/35509 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel: Replace config_of_path() with config_of_soc()Kyösti Mälkki
The previously provided device path made no difference, all integrated PCI devices point back to the same chip_info structure. Change reduces the exposure of various SA_DEVFN_xx and PCH_DEVFN_xx from (ugly) soc/pci_devs.h. Change-Id: Ibf13645fdd3ef7fd3d5c8217bb24d7ede045c790 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-10-02mb/google/drallion: Dynamicly disable memory channelEric Lai
Disable memory channel by HW strap pin. Using for factory debug. BUG=b:139773082 BRANCH=N/A TEST=Rework HW strap pin and check /proc/mem_info Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic5f53f0ba3bd432fbcb7513d2a8aa49d42f7a23e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
Two fields of struct sdram_params are renamed for future CL of DRAM full calibration. Field 'impedance' is also removed. BUG=none BRANCH=none TEST=emerge-kukui coreboot Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-02soc/intel/skylake: devicetree: introduce PchHdaVcType fsp parameterMichael Niewöhner
Make the the FSP Parameter PchHdaVcType a devicetree setting and make use of it in the devicetrees of all boards that currently set it. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Ibafc3b6bd2495658f2bd634218042ec413a89f5e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2019-10-01mb/kontron/986lcd-m: Add gameport base allocation workaroundPetr Cvek
A missing definition of gameport base (PNP io 0x60) will cause an automatic address assignment during PCI/PNP enumeration, which won't obey limit 0x7ff. This will cause the enumeration to fail as other devices already have the values enabled. The symptoms are: not working USB, PS/2, garbled UART console, not working PCIe GPUs and crashes. Probably because of wrongly assigned IO ports. Example of log (shortened): Done reading resources. Setting resources... !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.0 1c * [0x0 - 0xfff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.1 1c * [0x1000 - 0x1fff] io !! Resource didn't fit !! aligned base 1000 size 1000 limit 2e7 1fff needs to be <= 2e7 (limit) PCI: 00:1c.2 1c * [0x2000 - 0x2fff] io !! Resource didn't fit !! aligned base 400 size 10 limit 2e7 40f needs to be <= 2e7 (limit) PCI: 00:1f.2 20 * [0x3080 - 0x308f] io !! Resource didn't fit !! ... ERROR: PCI: 00:02.0 14 io size: 0x0000000008 not assigned ... ERROR: PCI: 00:1f.2 10 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 14 io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 18 io size: 0x0000000008 not assigned ERROR: PCI: 00:1f.2 1c io size: 0x0000000004 not assigned ERROR: PCI: 00:1f.2 20 io size: 0x0000000010 not assigned ... PCI: 00:1b.0 subsystem <- 8086/27d8 PCI: 00:1b.0 cmd <- 102 PCI: 00:1c.0 bridge ctrl <- 0003 PCI: 00:1c.0 subsystem <- 8086/27d0 PCI: 00:1c.0 cmd <- 107 PCI: 00:1c.1 brids70c01mcu0PeC: 0 dV0i8s0immicrocode: upd10a00000y0025 x666600CPU physiaB 0 0 e k MTRR cheaeu60zeAttemfWaiting for 1st Sot AP: slot 1 apic_L0ecl0zsax a aInitiNntt kac:oIG0 Ua dUrSGSGL Ct0C07fintel_vga_int15_h VGA Option ROM wa7..Azalia0Azalia: codkAbCiPCI: 00:1c.0 init finished We can see the ports probably started to collide after the activation of 00:1c.0 device. A debug run with compiled SPEW shows the problem with enumeration: PCI: 00:1f.1 18 * [0x50b8 - 0x50bf] io PCI: 00:1f.2 10 * [0x50c0 - 0x50c7] io PCI: 00:1f.2 18 * [0x50c8 - 0x50cf] io PCI: 00:1f.1 14 * [0x50d0 - 0x50d3] io PCI: 00:1f.1 1c * [0x50d4 - 0x50d7] io PCI: 00:1f.2 14 * [0x50d8 - 0x50db] io PCI: 00:1f.2 1c * [0x50dc - 0x50df] io PNP: 002e.7 60 * [0x50e0 - 0x50e0] io <-- gameport base DOMAIN: 0000 io: base: 50e1 size: 40e1 align: 12 gran: 0 limit: 7ff done Notice a weird base for DOMAIN, along with the limit. Adding a definition of gameport (0x220) as a workaround fixes the problems. The gameport should be still disabled thanks to disable bits (W83627THF datasheet is little bit chaotic). I didn't find any info if the gameport is available on some pads of the motherboard. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Change-Id: Ie8e42552ac5e638e91e5c290655edcce1f64e408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-01intel/pci: Utilise pci_def.h for PCI_BRIDGE_CONTROLKyösti Mälkki
This is a PCI standard register, no need to alias its definitions under different names. Change-Id: Iea6b198dd70fe1e49b5dc0824dba62628dedc69a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35521 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-30sb/intel/bd82x6x: Use common final SPI OPs setupArthur Heymans
This also reworks the interface to override OPs from the devicetree to match the interface in sb/intel/common/spi. Change-Id: I534e989279d771ec4c0249af325bc3b30a661145 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-30mb/google/drallion: Clean up devicetree configAamir Bohra
* Disable SATA controller and related configs. * Disable PCIe root ports 10 and related configs. -> Board uses integrated CnVi for WLAN * Disable PCIe root ports 12 and related configs. -> Board uses WWAN intarfaced over USB Change-Id: If9d49cef290dcccb114afccc3ac34cd072802ea4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35723 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/google/drallion: Configure LPSS controller parametersAamir Bohra
drallion uses below LPSS controllers: I2C: 0/1/4 GSPI: None UART: 0(Console) BUG=b:141575294 Change-Id: I9c57f8054f5da5add667168502ebc3e089c440f8 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
To support mt8183 power saving during suspend to RAM, this patch loads SPM firmware to support SPM suspend. SPM needs its own firmware to do these power saving in the right timing under correct conditions. After linux PM suspends, SPM is able to turn off power for the last CPU and do more power saving for the SoC such as DRAM self-refresh mode and turning off 26M crystal. BUG=none BRANCH=none TEST=suspend/resume passes for LPDDR4 3200 Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e Signed-off-by: Dawei Chien <dawei.chien@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-09-30mb/supermicro/x11-lga1151-series: x11ssh-tf: remove unneeded ACPI ifdefMichael Niewöhner
This removes the "ifdef ACPI" which is not needed here as we currently don't include gpio.h in any asl file. Change-Id: I803bbee5933eda9423a9bc9fcaea9e905e3ac78e Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35543 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb/supermicro/x11-lga1151-series: fix cmos layout and add default configMichael Niewöhner
This fixes the warning that power_on_after_fail could not be found, adds a default config and adds the parameter hyper_threading. Change-Id: I10b0aa71fa7916b01e93e16cbd81e427fd14f6a4 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35526 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30getac/p470: Drop unused PCI secondary bus resetKyösti Mälkki
Change-Id: I959cdc08d43fea28f8bbc649cd46bab5656d6ca8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-30mb/siemens/mc_bdx1: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: Iee12a5d1781c869b20bc14a52ecbf23474caa3fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-09-30mb/google/drallion: Adjust GPD3 pin terminationBora Guvendik
Internal pull up need to be enabled for GPD3 as power button pin for PCH according cometlake pch EDS vol1 section 17-1. Without that pin will stay floating and hook up XDP can cause system shutdown as power buttone event will trigger. BUG=N/A TEST=Hook up XDP on drallion platform, able to boot up into OS and stay at power up state. Change-Id: Idd1befeb14a251b7c0542ca1f99049d07b28fb98 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-09-30mb/google/drallion: De-assert WWAN reset signalAamir Bohra
BUG=b:141734594 Change-Id: I419f7d11dffebe6c44eefa05750834d07d19857b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-28mb/google/variants/drallion: Update the spd index mapAamir Bohra
BUG=b:141575294 Change-Id: I1b2b4362b84b170bd73b760828ca300ec86c4534 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-09-28mb/google/drallion: Set UART for console to UART controller 0Aamir Bohra
Drallion uses UART 0 for console, change the config accordindly. BUG=b:139095062 Change-Id: I0ae2f8459b6225b99b758180413afa22386355d4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35633 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-28mb/lenovo/x131e: enable mSATA slotJames Ye
Per google/stout. Tested with SanDisk SSD U110. Change-Id: I7cc9837f572236acac2007e95990e64c25a5d6e2 Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2019-09-27mb/lenovo/x131e: correct USB port configJames Ye
Based on schematic and register dumps. Change-Id: I91fc47022988cfe986fb8c1ed21dc073ee7d16bc Signed-off-by: James Ye <jye836@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-27mb/supermicro/x11-lga1151-series: remove unneeded vendor id configMichael Niewöhner
The vendor id option set here is useless as most SSVID registers get filled with 0x8086 (their VID) by default, anyway. Besides that the Kconfig option isn't meant for retrofit ports, cf. commit 7e1c83e31bd (Add Kconfig options to override Subsystem Vendor and Device ID). The right place would be the devicetree. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: If67c679bb342f63096902535734106e4f1651118 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-26mb/supermicro: restructure x11ssh-tf to represent a x11 board seriesMichael Niewöhner
Most of the X11 boards with socket LGA1151 are basically the same boards with just some minor differences like different NICs (1 GbE, 10 GbE), number of NICs / PCIe ports etc. There are about 20 boards that can be added, if there is a community for testing. To be able to add more x11 boards easily like x11ssm (see CB:35427) this restructures the x11ssh tree to represent a "X11 LGA1151 series". There were multiple suggestions for the structure like grouping by series (x10, x11, x...), grouping by chipset or by cpu family. It turned out that there are some "X11 series" boards that are completely different. Grouping by chipset or cpu family suffers from the same problem. This is why finally we agreed on grouping by series and socket ("X11 LGA1151 series"). The structure uses the common baseboard scheme, while there is no "real" baseboard we know of. By checking images, comparing logs etc. we came to the conclusion that Supermicro does have some base layout which is only modified a bit for the different boards. X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we expect the other boards to have mostly the same device tree, there is a common devicetree that gets overridden by each variant's overridetree. Besides that some very minor modifications happened (formatting, fixing comments, ...) but not much. Documentation is reworked in CB:35547 Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26mb/mainboard/hatch: support elan touchpad for AkemiPeichao Wang
Modify IRQ pin from D21 to A21 and support wake-up from touchpad BUG=b:141519690 TEST=build bios and verify elan touchpad works fine Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26google/grunt: add new two DDR source for TreeyaPeichao Wang
new DDR particle: 1. Samung K4A8G165WC-BCWE 2. Hynix H5AN8G6NCJR-XNC BUG=b:139085024 BRANCH=master TEST=rework new source to DUT and re-flash bios to DUT and verify DUT will bring up successfully Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I0d039af53938086733308a081a77a7398e7bf5d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
Add the configuration 'Juniper' for the new mainboard. BUG=b:137517228 TEST=make menuconfig; select 'juniper' and build Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-09-25mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to KconfigFurquan Shaikh
All variants of hatch are using Comet Lake and so the selection can be done in Kconfig without requiring each variant to do the same. Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Andrew McRae <amcrae@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-09-25mb/siemens/mc_apl1: Sort the names of all variant mainboardsWerner Zeh
Sort the names of all variant mainboards in an ascending order. Change-Id: I19d502298744c0e0cbc91eb836c62ca90cdb9a5c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-25mb/siemens/mc_apl{2,4,5}: Enable VBOOTWerner Zeh
Enable VBOOT in Kconfig and provide a flashmap that includes all the needed sections for VBOOT support. Change-Id: I3d58094256d2730dbd249291a8f1ed8df9dfe62d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-09-24intel/cpu: Switch older models to TSC_MONOTONIC_TIMERKyösti Mälkki
The implementation of udelay() with LAPIC timers existed first, as we did not have calculations implemented for TSC frequency. Change-Id: If510bcaadee67e3a5792b3fc7389353b672712f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34200 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-24Add Razer Blade Stealth (2016) H2UJohanna Schander
The Razer Blade Stealth H2U is a KabyLake System using: - Intel KBL 7500U - ITE8528E SuperIO - Intel 600P Series NVMe SSD - Either four MT52L1G32D4PG (16GB) or MT52L512MB32D4PG (8GB) of soldered memory in dualchannel mode - (Optional) Touchscreen - HDMI 2.0a via DP-1: Paradetech PS175 - AlpineRidge Thunderbolt 3 controller - TPS65982 USB-PD power switch / multiplexer Even though it has a 16MB chip equipped (W25Q128.V) only the first 8MB are used and mapped via IFD. The rest is left empty (0xFF). The flash is not secured in any way and can be read via flashrom. It should be the source for this port's IFD and ME blobs. Working: - USB-A Ports left and right - Speakers - Touchscreen (USB) - Onboard Keyboard in Linux - NVMe SSD - SeaBIOS, Tianocore and Grub Payloads - Webcam - Powersaving Modes - Battery state and LID switch, sometimes slow to update. - Touchpad (I2C-HID) - Headphones Not part of this commit: - Thunderbolt / USB-C (Requires advanced EC signaling) - Full HDMI support (Currently requires plugged connection at boot) Change-Id: I7ede881d631e1863f07f5130f84bc3b8ca61a350 Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2019-09-24mainboard/ocp/monolake: Hide internal NICAndrey Petrov
Disable root port IOU0 to which built-in NIC is attached. TEST=on OCP monolake, hide built-in NIC and make sure OS does not report built-in NIC Change-Id: I2384e7dd073355f0ced2902ac2d8418996b1c5aa Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-09-24emulation/qemu-i440fx: use fw_cfg_dma for fw_cfg_readHimanshu Sahdev
- configure DMA fw_cfg - add support to read using fw_cfg_dma - provide fw config version id info in logs BUG=N/A TEST=Build and boot using qemu-i440fx. Change-Id: I0be5355b124af40aba62c0840790d46ed0fe80a2 Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-24mb/google/kohaku: Update DPTF parameters and TCC offset settingSeunghwan Kim
This change applies fine-tuned DPTF parameters and TCC offset setting for kohaku. Also enables EC_ENABLE_MULTIPLE_DPTF_PROFILES for tablet mode. BUG=b:137688474 BRANCH=none TEST=built and verified the setting values Change-Id: I92e268b2e07ca5a04e29bda84ddb8fc21eb23251 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-09-23mb/up/squared: Fill LPDDR4 dimm infoPatrick Rudolph
Fill the dimm info struct to make SMBIOS type 17 appear. TESTED=Up Squared Change-Id: I4de63362c8fea8a886594cdcf0eec48421afb605 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34564 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/gigabyte/ga-h61m-s2pv: Improve LPC decodingAngel Pons
Drop unused CNF2_LPC_EN, as there is no device which uses IO 0x4e/4f. Do not use the mainboard model to set COMA_LPC_EN. Make use of NO_UART_ON_SUPERIO instead, as it is more future-proof. Change-Id: Iac49250b0f509a42012f82db8aa85ba85559c66f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-22mb/mainboard/hatch: add spd: 8G_3200 for AkemiPeichao Wang
BUG=b:140545732 TEST=build bios and spd index set to 6, verify DUT bring up normally Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I337b0bdcd37a9c4baacccbc6786968031a41b31e Reviewed-on: https://review.coreboot.org/c/coreboot/+/35511 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/ocp/monolake: Add vboot RO only supportPhilipp Deppenwiese
Change-Id: I28a21d64e2781af294670a94c1fc88fb81e80f9e Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35492 Reviewed-by: Andrey Petrov <anpetrov@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-22mb/google/hatch: Add G2Touch Touchscreen supportWisley Chen
Add G2Touch Touchscreen support for dratini BUG=b:141281841 TEST=emerge-hatch coreboot chromeos-bootimage, and check touchscreen work. Change-Id: I0dbde7f8396da6335b22aeb4a9703336e2b862b8 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-09-22mb/facebook/watson: Enable vboot for measurementsPhilipp Deppenwiese
Signed-off-by: Philipp Deppenwiese <philipp.deppenwiese@9elements.com> Change-Id: I8287d475301aaaae736df9cc95fcd18cc04b40fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/35232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <anpetrov@fb.com>
2019-09-22mb/supermicro/x11ssh: remove unnecessary fsp setting CdClockMichael Niewöhner
CdClock does not need to be set because the board does not use IGD. Change-Id: I6835ccdf80530f9efc6fdeb0363dcf9267f99d21 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 03:01:15 +0000