summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-11-07mb/google/poppy/variants/nautilus: add nhlt supportNaveen Manohar
Nautilus board uses Dialog da7219 headset codec, Select the appropriate NHLT blob to be packaged in CBFS. Also generate the required ACPI NHLT table for codec and the supported topology in nautilus. Removes unwanted DMIC blob pick for nautilus BUG=b:68686020 TEST=With the required driver support in kernel verify that the Audio plays on headset and recording on headset mic Change-Id: I104889f54da1de38854bcb72aabbc88b739d6c09 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/22325 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07intel/cannonlake_rvp: Clean up GPIO programmingLijian Zhao
Since we move from cannonlake U DDR 4 platform to cannonlake U LPDDR4 platform, it is also critical to revisit the GPIO settings as they are different. Remove unused GPIO setting for old platform, and clean up the native function definition. PAD_CFG_NF can only select NF1,NF2 ..., set to GPIO mode is illegal. TEST=Boot up in chromeos successfully. Change-Id: I0022b791bd8459ea2afdcd0241b603ce81408785 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2017-11-07src/mainboard/intel/glkrvp: Fix Lid switch supportShaunak Saha
SCI trigger logic had to be inverted. This patch enables the system to wake up from S3 when lid is opened when the system is in suspend state.We are trying to match what a external EC card running ChromeEC FW is sending on the signal. TEST = Verified that system wakes up from S3 on toggling lid switch back to open state. Change-Id: Ib42a38088ee028eddc6769921b0552c569da25a9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Schander <coreboot@mimoja.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07mainboard/google/kahlee: Add MAINBOARD_FAMILYLann Martin
BUG=b:68865273 Change-Id: Ia2e9b10035e9dd502a563cdf8324ea8ea1922db3 Signed-off-by: Lann Martin <lannm@chromium.org> Reviewed-on: https://review.coreboot.org/22359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READYMario Scheithauer
For internal measurements this mainboard needs a marking inside the NC FPGA when coreboot is ready and payload has been loaded. Change-Id: I37908b21e2a077dec7fa99b0db6d1fd9b6878341 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-07mainboard/intel/harcuvar: update to set the HSIO lines configurationJulien Viard de Galbert
Change-Id: Ifc3423ff983fb631edcab087d04742937b25ef86 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/22310 Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-07RISC-V boards: Stop using the config stringJonathan Neuschäfer
RISC-V is moving towards OpenFirmware-derived device trees, and the old functions to read the config string don't work anymore. Use dummy values for the memory base and size until we can query the device tree. Change-Id: Ice13feae4da2085ee56bac4ac2864268da18d8fe Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-06gru: Fix and export SPK_PA_EN GPIO for ScarletJulius Werner
On older Grus, GPIO0_A2 was an audio voltage rail enable line. On Scarlet, we instead moved the audio codec enable (previously on GPIO1_A2) there. Unfortunately the code still had some hardcoded leftovers that were overlooked in the initial port and make our speakers smell weird. This patch fixes the incorrect GPIO settings and adds the speaker enable pin to the GPIOs passed through the coreboot table, so that depthcharge doesn't have to keep its own definition of the pin which may go out of sync. Change-Id: I1ac70ee47ebf04b8b92ff17a46cbf5d839421a61 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/22323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-by: Alexandru Stan <amstan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-06intel/cannonlake_rvp: enable CNVi bluetoothBora Guvendik
Enable USB2 port 10 for CNVi bluetooth. TEST=Boot to OS, verify bluetooth functionality. Change-Id: I5f2390c149bf0de911efac09f54ccd641f51bbcd Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-11-06mainboard/google/coral: Override VBT selection for astronautren kuo
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms) CQ-DEPEND=CL:*496012 BUG=b:67756548 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. Change-Id: I580567decfccd78366c37181255015ac2cd76493 Signed-off-by: Ren Kuo <Ren.Kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/22306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-11-04mainboard/google/kahlee: remove unused FILECODE macroAaron Durbin
From what I can tell FILECODE isn't used at all in this file. Remove it. Change-Id: Ie88140e63a4917f470f42119c1fe4e8c7d2584ca Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-04src/mainboard/glkrvp: Fix ec_in_rw and wpShaunak Saha
Change-Id: I513b26d39973d9714b531d1ab0755c66d19eb332 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/22195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04asus/p2b: Move to EARLY_CBMEM_INITKeith Hui
Change-Id: I0bf4d6318ade6e931db4f8b1af08db1f9f93c313 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/22228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-11-03mainboard/intel/cannonlake_rvp: enable SD cardBora Guvendik
Set SCS SD enable FSP parameter and set card detect gpio information. Change-Id: Ic99466c0d2d59070418d765442ff6d217023803b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03soraka: update pad reset config of WLAN_PE_RST to RSMRSTDivya Chellap
In skylake based platforms, setting GPIO pad reset config to DEEP will reset the gpio configuration across warm reset, set it to RSMRST to preserve the configuration across warm resets. Also, moving the configuration from early to late as appropriate. BUG=b:64386481 BRANCH=none TEST= WiFi functionality across S3, DeepS3, S0ix and warm/cold reboot. Change-Id: I38940b7c7d71e60bf0e51d6978a00be148ad61bc Signed-off-by: Divya Chellap <divya.chellappa@intel.com> Reviewed-on: https://review.coreboot.org/22174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-03google/reks: override USB2 Phy settings on BSW D-Stepping SOCMatt DeVillier
Adapted from Chromium commit 12ad5b5: Reks : override USB2 Phy settings... Base on Intel recommendation, override following settings for USB2 port 1/2/3 on BSW D-stepping SOC. 1. Set USB[1] register for right side to 7321 2. Set USB[2] register for left side to 7021 3. Set USB[3] register for CCD to 7021 Original-Change-Id: I04240a010e875f29c47f4fea83ff918f180b0273 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iabd6312576e9897315c4e4dbf19341380d9d1414 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03google/reks: override RX ODT limit, RAM geometry if neededMatt DeVillier
Adapted from Chromium commit 6ee6f3d: Reks: To set the RX ODT limit... Override RX ODT and DRAM geometry for Micron part MT52L256M32D1PF-107. Use get_ramid() to determine if override is necessary. Original-Change-Id: I41f3aba030a00152e1217533ef953338ac396605 Original-Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Original-Reviewed-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Keith Tzeng <keith.tzeng@quantatw.com> Change-Id: Iea8c3c67e5afb21285dc15ad665474ad5f192423 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03google/kahlee/acpi: Serialize method _CRSPaul Menzel
ASL+ Optimizing Compiler/Disassembler version 20170831 shows the remark below. ``` dsdt.aml 87: Method (_CRS, 0x0, NotSerialized) Remark 2120 - ^ Control Method should be made Serialized \ (due to creation of named objects within) ``` So, serialize the method. Fixes: commit 4a51ea8470 (google/kahlee: Add ASL for Elan touchpad) Change-Id: I664f493318cbfd80d91565c0d29ec918278c4906 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/21901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-11-03mainboard/google/kahlee: Prepare for variantsMartin Roth
Move files that are particularly specific to the mainboard into the variant directory. Files that only have small areas of mainboard specific pieces use #if to separate between the boards. Add memory.c to split out the variant board id into a weak function. Add baseboard/gpio.h to satisfy the build - this will be updated in the next commit. BUG=b:68293392 Change-Id: I7c1beb45f571f2547f3b5b0d7ec78923d0cec761 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-03siemens/mc_apl1: Enable I2C0 with 100kHzMario Scheithauer
The default setting for I2Cx is 400kHz. On this mainboard there is a device on I2C0 which requires a lower clock rate to work correctly. For this reason we set the frequency to 100kHz. Change-Id: I637a58a0c89ead55ca1176d6aecdfaba5897d64f Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-11-03siemens/mc_apl1: Set coreboot ready LEDMario Scheithauer
This mainboard has its own coreboot ready LED. The LED is switched on via GPIO CNV_RGI_DT. Change-Id: I179d013746c1334337dc9e6b7f09ac54eff0cd77 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-11-03siemens/mc_apl1: Add legacy IRQ routing for PCI devicesMario Scheithauer
On this mainboard there are PCI devices, which are connected to the PCIe root port via a PCIe-2-PCI bridge. One of the devices only supports legacy interrupt routing. For this reason we have to adjust the PIR6 register (0x314c) which is responsible for PCIe device 13h and 14h. This means that the interrupt routing will also be the same for both PCIe devices. The bridge is connected to PCIe root port 4 (Device 14.0). The following routing is required: INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#->PIRQA# Change-Id: I5464c9a2669773bc1e6cd4b4d29d1be838dbfa27 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/22139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-11-03google/nautilus: enable elan touchpad supportChris Wang
add elan touchpad in devicetree. BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I30e6797ef06351690ff0b5c78ea76918547167a7 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: shkim <sh_.kim@samsung.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-11-03google/nautilus: Update GPIO tableChris Wang
Update GPIO settings to meet nautilus's schematic design. BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I11930df62130431764702371a3ba84949a65ba30 Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-03google/nautilus: add spd data by ram idChris Wang
update with nautilus memory spds. RAM_ID = 0 => K4E8E324EB-EGCF RAM_ID = 1 => K4E6E304EB-EGCF RAM_ID = 2 => K4EBE304EB-EGCG BRANCH=master BUG=b:66462881 TEST=emerge-nautilus coreboot Change-Id: I29d8a76b170aee64bb0125276df0e4709012daba Signed-off-by: Chris Wang <chriswang@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/22175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2017-11-02mainboard/google/coral: Override VBT selection for santaTim Chen
Current VBT setting for T8 is only 1ms which is under Innolux N116BCA-EA1 panel's spec. Modify T8 to 100ms. (Innolux's panel's spec requires T8 needs to be greater than 80ms) BUG=b:67756548 BRANCH=master TEST=emerge-coral depthcharge coreboot chromeos-bootimage Run on DUT and check panel sequence meets spec. CQ-DEPEND=CL:*493633 Change-Id: I7934b0f6d40b15796c55d360995c5eb0c5049222 Signed-off-by: Tim Chen <Tim-Chen@quantatw.com> Reviewed-on: https://review.coreboot.org/22294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01intel/cannonlake_rvp: enable CNVi wifiBora Guvendik
Leaving the wifi related gpios unmodified for now due to FSP problem. If H0-H3 is configured as native mode and GPIORXDIS, GPIOTXDIS bits in DW0 are cleared, it causes FSP to assert when wifi module is attached. coreboot gpio macros clears these 2 bits because they are suppose to be "don't care" in native mode. TEST=Boot to OS and verify wifi Change-Id: Ica5e1c43802d04a9471cdfa0087e86f669122fff Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22094 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-01google/fizz: enable SPD read by wordKane Chen
This is to enable SPD word access to reduce boot time. It can save 80 ~ 100 ms per DIMM. BUG=b:67021853 BRANCH=None TEST=system boot, and boot time is reduced Change-Id: Ic527a539ed634e15b939b18fff4b4e08ebb3ec57 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/22267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-01mainboard/google/coral: Update touchscreen device ACPI nodesSheng-Liang Pan
For Raydium, export reset GPIO as well as PowerResource. Let EN_PP3300_TOUCHSCREEN signal will goes to low at S3 mode. BUG=b:67879912 BRANCH=coral TEST=emerge-coral coreboot Change-Id: Ibf501b40ecfc957fd8be7ebffd2357dfa0e07757 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/22252 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-31mainboard/google/snappy: Update touchscreen device ACPI nodesKevin Chiu
For MELFAS/Raydium, export reset GPIO as well as PowerResource BUG=b:68141940 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I1915ff8207502b80ecba6b63ce2ce1b866faf4c4 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22146 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-31AMD boards: Fix function name (soft_reset) in messageJonathan Neuschäfer
Change-Id: Ia21a3e93712bd6b6780fe7308c6cf79c553f4e1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-10-28mainboard/google/Kahlee: Combine BiosCallOuts filesMartin Roth
There's no need to have these separated. BUG=b:64932381 Test=Build & Boot Change-Id: I22898d3bf95d5e9a8fc2643bfccae1e2f5b29e44 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-26purism/librem_skl: add new variant Librem 15 v3Matt DeVillier
Add new board librem15v3 as a variant of the librem_skl baseboard. Changes from the librem13v2: - Change board name and version - Change GPIO A18, A19, A20, D9, D10 and D11 from NC to GPIO - Enable PCI device 1c.4 - Change USB port definitions in devicetree TEST: build w/SeaBIOS, boot PureOS on Librem 15 v3 hardware Change-Id: I7c762a34f5b961c908e4a29ec331da4b0dea9986 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22048 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-26purism/librem13v2: convert to variant setupMatt DeVillier
Convert the Purism Librem13v2 board to a variant setup, in preparation of adding the librem15v3 as a new variant. The 13v2 and 15v3 are nearly identical, so this minimizes new code to add support for the latter. Change-Id: I5d648cdb8f63c03de5474253203b3d0853673294 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22047 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-24mainboard/intel/cannonlake_rvp: Enable variant gpio configurationJohn Zhao
This patch refers to variant_gpio_table for board gpio configuration. Change-Id: If5b4c20ceccb32fc1ab4246482d8fecb491777c4 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2017-10-23mb/sapphire/pureplatinumh61: Remove S3 resume delayNicola Corna
It seems that recent changes in coreboot have fixed the raminit issues on this board; the workaround of 10 ms delay after the S3 resume is not needed anymore and can be removed. Change-Id: If8fb97ecf3eb797f53270a053201fafd32031678 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-23purism/librem13v2: migrate from FSP 1.1 to 2.0Matt DeVillier
Migrate the Librem13v2 from using FSP 1.1 to the public/GitHub FSP 2.0 Skylake/Kabylake release: - select FSP 2.0 in Kconfig - adjust romstage/ramstage functions as required - refactor pei_data functions - remove VR_RING domain from devicetree (unsupported in FSP 2.0) - add SataSpeedLimit parameter to work around power-related issue when operating at SATA 6.0Gbps speed TEST: build/boot Librem13v2, observe successful boot, lack of SATA-related errors in dmesg. Change-Id: Iedcc18d7279409ccd36deb0001567b0aa5197adf Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-23mainboard/google/coral: Add USB2 phy setting override for Astronautren kuo
In order to pass type C USB2 eye diagram for sku Astronaut, USB2 port#1 PHY register needs to be overridden. sku ID:0,1 Astronaut (USB) port#1: PERPORTPETXISET = 7 PERPORTTXISET = 2 sku ID:61,62 Astronaut (LTE) port#1: PERPORTPETXISET = 7 PERPORTTXISET = 5 BUG=b:68120012 BRANCH=master TEST=emerge-coral coreboot chromeos-bootimage Change-Id: Icf5c9e5f4dae15630ec4d6ca6648cae78ca910c6 Signed-off-by: Ren Kuo <ren.kuo@quantatw.com> Reviewed-on: https://review.coreboot.org/22135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-22security/vboot: Move vboot2 to security kconfig sectionPhilipp Deppenwiese
This commit just moves the vboot sources into the security directory and fixes kconfig/makefile paths. Fix vboot2 headers Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60 Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/22074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update microcode length in CBFSYouness Alaoui
Microcode blob has been updated, so update the length to match Change-Id: I46ac10e5c6cd6492c98a7034649797f301101abc Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-22purism/librem13v2: Fix USB settings and set OC pinYouness Alaoui
The USB settings were wrong in some places, or missing and the USB_OC values were taken from the schematics. Change-Id: I29b564a4161c486f5e8556b1726471bfa2351b7a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Update devicetree settingsYouness Alaoui
Disable SataDevSlp and update other values to match vendor/AMI firmware. Change-Id: I6f278be54b86450575c366d68bfa6a67575b0fdd Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/22042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-22purism/librem13v2: Change DRAM Rcomp/DQS valuesYouness Alaoui
The RComp values have been updated to match what is shown in the schematics. Extracting the Memory configuration blob from the original BIOS (A blob which contains the correct binary sequence matching the RComp values appears in object with GUID 2D27C618-7DCD-41F5-BB10-21166BE7E143), I could find and confirm the DQ and DQS mapping. Small code cleaning in romstage.c with no effect. Change-Id: I35c734269b365fd759e9bd56224a80a8a8df5a57 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-22purism/librem13v2: Add reading of serial number from CBFSYouness Alaoui
Check CBFS for 'serial_number' field, and use value if exists; otherwise use value set at compile time. Change-Id: I4b50f6310ca32b9dd372db075a5b5729e3b06619 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/22040 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22google/kahlee: Add PSP to devicetree.cbMarshall Dawson
Add the missing device and ensure it shows up in the devicetree prior to PCI enumeration. Change-Id: Ia2c4ba1200422b36c533e86065a4fcd10c4b2722 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-22amd/gardenia: Add PSP to devicetree.cbMarshall Dawson
Add the missing device and ensure it shows up in the devicetree prior to PCI enumeration. Change-Id: I44c7df6a2be149ed61094f67ef1c578736e5b55c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-22mb/google/link: Enable libgfxinitNico Huber
Beside the high-resolution eDP panel, it features a dual-mode mini-DP port. Change-Id: Iae60c1f930f5778ee3b5d9d19227168257e9ae06 Tested-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/22125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-20kahlee: Set Kahlee GPEsMarc Jones
Add GPE configuration table. Remove GPE3 from the power button ASL and set the EC to GPE3(AGPIO22). Set the EC and PCIE/WLAN SCI GPIO signals. Set GPE ASL methods for: PCIE/WLAN 8h EHCI 18h XHCI 1fh Note EC GPE3 methods are in the EC ASL. BUG=b:63268311 BRANCH=none TEST=Test lidswitch powers the device on and off at the login screen. Change-Id: I27c880ee84b6797d999d4d5951602b654ede948e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22096 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20google/fizz: Set PL2 value based on sku id/charge max powerShelley Chen
Set PL2 based on either 90% of usb c charger's max power or sku id if using a barrel jack. BUG=b:37473486 BRANCH=None TEST=output debug info for different skus and make sure PL2 set correctly. Change-Id: I487fce4a5d0825a26488e71dee02400dbebbffb3 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-05 08:30:52 +0000