summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-01ACPI: Rename FADT model and set it to zeroElyes HAOUAS
INT_MODEL defined in ACPI 1.0 and renamed to reserved since V 2.0. The value for this field is zero but 1 is allowed to maintain compatibility with ACPI 1.0. So set this value to zero as we are using greater version than ACPI 1.0. Change-Id: I910ead4e5618c958a7989f4c309a3a4bb938e31a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29986 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01mb/siemens/mc_bdx1: Enable TPM2 on LPCWerner Zeh
This mainboard has a TPM located on the LPC bus. Enable the driver for it so that it is initialized and the ACPI table entry is generated. Change-Id: I2eae63932658c2a9f752d28d7c08c27f48531360 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/31663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-03-01mb/google/sarien: ALC3204 HDA verb table pin config changeJoyce Toh
On Sarien, change pin config of 0x19 (headset mic) and 0x21(headset headphone) to change jack location so that naming does not use "Front" in the name."Front Headphone" --> "Headphone" so it matches naming on Arcada. BUG=b:126334749 TEST= verify with 'evtest' command that jack name is "HDA Intel PCH Headphone" not "HDA Intel PCH Front Headphone" Change-Id: I36ccf0c0a3952ab363fe6ee313fac8f0cce4dd61 Signed-off-by: Joyce Toh <joyce.toh@intel.com> Reviewed-on: https://review.coreboot.org/c/31624 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28src/mb/sifive/hifive-unleashed: replace fdt in maskromXiang Wang
The fdt in the maskrom cannot be used to start linux. The correct fdt is dumped by replacing the bbl of the original firmware and used in coreboot. Correct the mac address in fdt by reading otp Change-Id: Ic29f0e590311360b85fafd12ebc36cd189fbbc38 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/31047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-02-28mb/google/poppy/variants/atlas: Update DPTF parametersPuthikorn Voravootivat
Preliminary dptf change for Atlas - Throttle charger using all temp sensors (not just ambient) - Throttle charger with higher priority than CPU - Update throttle temperature using data from surface thermistor in thermal chamber test BUG=b:113101335 BRANCH=None TEST=based on preliminary data from thermal chamber test Change-Id: Ic1ab72f569e8a4f7bffc5560518fb703d32f4b21 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/31628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@google.com>
2019-02-28mb/google/poppy/variants/atlas: Add tdp_pl1_override valuePuthikorn Voravootivat
Use 7w PL1 with DPTF throttle to enable better performance for atlas. BUG=b:113101335 BRANCH=None TEST=Recommend setting from thermal team. Build coreboot on atlas Change-Id: Idcf44f213259634a507a013b31b410ed322e9479 Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-on: https://review.coreboot.org/c/31627 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Caveh Jalali <caveh@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28cpu/intel: Rename socket_mPGA478MN to socket_pNico Huber
These marketing names are much easier to distinguish. My mnemonic: Socket M => up to Merom, Socket P => up to Penryn. Change-Id: I3c2a59596cf7f3cd763bd79962ad326ab080677b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/31645 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28cpu/intel: Rename socket_mFCPGA478 to socket_mNico Huber
The name was wrong. mFCPGA478 is actually a pseudonym for mPGA478MN, the successor of the socket that was meant. The official name of this socket is mPGA478MT. But "Socket M" is much easier to distinguish. Change-Id: I4efeaca69acddfcdc5e957b0b521544314d46eeb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/31642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-28mb/google/hatch: Add GPIO programming for GPP_C0 to GPP_C7Maulik V Vaghela
coreboot did not program all GPIOs from C0 to C7 correctly which are SMBUS GPIO. Some of the GPIOs are left in default mode which is native function but we need to configure as GPIO mode and provide proper configuration as per schematic. After fixing GPIO, CSME power gating issue also gets fixed since SMBUS was not getting idle due to GPIO configuration and CSME was not getting power gated due to SMBUS. BUG=b:123702553 BRANCH=none TEST=Check on hatch board. CSME was not getting power gated for s0ix. After applying this patch CSME is power gated now Change-Id: I5c6b9310dcc7bade0023abd5524781ce71df28be Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-28google/kukui: Add RTC initializationRan Bi
Initialize RTC at ROM stage. BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I9d9c68755e8a6ac65dd794211e6ccf06e5057567 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/31508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-02-28mb/intel/saddlebrook: Fix 2nd DIMM slotKyösti Mälkki
Assumed broken during review and rebase. The SPD at address 0x52 will appear at index 1. Change-Id: I213853d2b981294554d8d1b254da476905a41c13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: PraveenX Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-02-27flapjack: use sku_id 0 for un-provisioned boardYH Lin
Instead of using 2, 0 is now used for non-CBI provisioned board or corrupted CBI board to confrom to the sku encoding. BUG=b:123676982 BRANCH=kukui TEST=test with un-provisioned board to verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I66f29f8a46cd774b40354def7d3623ec44cb96ce Reviewed-on: https://review.coreboot.org/c/31623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-27mb/google/hatch: Initialize GPIO_PCH_WP early in bootRizwan Qureshi
Initialize GPIO_PCH_WP early in boot. Update cros_gpios[] array with GPIO_PCH_WP information. Also, Configure recovery mode GPIO as virtual since hatch does not have one. BUG=b:125943273 Change-Id: I0b7e6dbf9229941aca4952965fb54f07457dccae Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: Select SD_PWR_EN Active high configRizwan Qureshi
Hatch implements active high SD_PWR_EN and requires a workaround in _PS0 and _PS3 control methods to make sure SD_PWR_EN stays low in D3. Select MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE to enable the same. BUG=b:123350329 Change-Id: I96ab9660eb50100207fe9a237f5924b65eae0928 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: update SD card detect GPIORizwan Qureshi
SD_CD# in Cannonlake PCH is also wired to an internal virtual GPIO, expose that GPIO for kernel to configure card detect IRQ. BUG=b:123350329 Change-Id: I566cc2eb11dc257366897a1efba905b8ddcf493d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/cyan: fix RAM training on edgar variantMatt DeVillier
Adapted from Chromium commit 5351dc0d [Edgar: To set the RX ODT limit and dram geometry with RAMID detection] Several cyan variants require memory init parameters be passed to FSP for handling of specific Micron modules; without these, RAM init will fail when loading training data from the MRC cache, and boot will halt. This was missed when I upstreamed edgar along with the other cyan variants, so add the required memory init parameters for edgar as per its source Chromium branch. Test: build/boot on edgar board with affected Micron memory modules, verify boot successful with populated MRC cache. Change-Id: I6a2bc30b54ff1a17c854a90dfcb2308d27ee2be7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31615 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-26mb/gigabyte/ga-h61m-s2pv: fix cosmetic thingsAngel Pons
Remove unneeded options, note where usbdebug is, reorder devicetree and clean up dsdt. Tested, board still boots. Change-Id: Ice0eff7b9829816aff4d334f4ac4a2fb435a2fb0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-26flapjack: get sku_id from ec (cbi)YH Lin
On flapjack, retrieve the board information via CBI interface. Also reserving 0x2 sku_id for the case of un-provisioned board as this is the id used prior to the readiness of cbi. BUG=b:123676982 BRANCH=kukui TEST=provisioned cbi info and verify the sku_id. Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: Iad7a52df38e2045abbdded8ba0a1f1544de961fc Reviewed-on: https://review.coreboot.org/c/31586 Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-24mb/emulation/qemu: Fix fw_cfg file loadingPatrick Rudolph
The change bcd84fe "mb/emulation/qemu-i440fx: change file handling" introduced a regression where it loads only 4 bytes of the ACPI and SMBIOS table, instead of the whole table. Load the whole ACPI and SMBIOS table. Tested on Qemu using GNU/Linux. Change-Id: Ibacbf7caab9be5f181c12e9dd39a2893b13cf6c9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/31593 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-22mb/google/hatch: Enable wake from trackpadShelley Chen
For some reason, wake does not currently work from GPP_D21, but IRQs are working fine from that gpio. Thus, we have to switch IRQ to GPP_D21 and wake to GPP_A21, which was previously used for IRQs from the trackpad. Additionally, we need to use two gpios for irqs and wake source at the moment because of b:123967687, where FSP is locking down PCR and configuring ITSS. We need to configure the wake source gpio as inverted and the IRQ gpio as non-inverted until the bug is resolved. BUG=b:121212459 BRANCH=None TEST=run evtest with trackpad Use trackpad with ChromeOS UI and make sure it reacts as expected. Run powerd_dbus_suspend and press trackpad and make sure DUT wakes. Change-Id: I7b236136befc05c6586d9ba69185ed4b5d385273 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-22mb/google/poppy/variants/atlas: move WiFi wake to GPP_B7Caveh Jalali
The latest rev. of the atlas board moves the WiFi wake source from WAKE# to GPP_B7. The original GPP_A0 in the device tree is just wrong. This also reconfigures DW1 to the GPP_B group so we can use GPP_B7 as a wake source. GPP_B7 is still configured as a no-connect in gpio.c, so this doesn't actually enable WiFi wake. We'll follow up with another patch to set up GPP_B7 properly on boards that support it. BUG=b:122327852 BRANCH=none TEST=atlas still boots Change-Id: I1816500dd0ab6186fd51aa6945faf73d00c152fe Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/31211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-22mb/ocp/monolake: Fix booting issuesLukasz Siudut
We experienced booting issues during FSP-M phase. Applying fix that was introduced for wedge100s - 817994c1bec (mb/ocp/wedge100s/romstage: Workaround broken platform state) - helped and systems started to boot properly. Signed-off-by: Lukasz Siudut <lsiudut@fb.com> Change-Id: Ibfbe9d19c7413098c56d1b6131640097fdf731ab Reviewed-on: https://review.coreboot.org/c/31435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
When <symbols.h> was first introduced, it only declared a handful of regions and we didn't expect that too many architectures and platforms would need to add their own later. However, our amount of platforms has greatly expanded since, and with them the need for more special memory regions. The amount of code duplication is starting to get unsightly, and platforms keep defining their own <soc/symbols.h> files that need this as well. This patch adds another macro to cut down the definition boilerplate. Unfortunately, macros cannot define other macros when they're called, so referring to region sizes as _name_size doesn't work anymore. This patch replaces the scheme with REGION_SIZE(name). Not touching the regions in the x86-specific <arch/symbols.h> yet since they don't follow the standard _region/_eregion naming scheme. They can be converted later if desired. Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-02-22mb/google/hatch: Make EC software sync enabled by defaultScott Collyer
EC software sync had been disabled because BIOS was not bundling a useful EC image. This is no longer required. This CL removes that change so EC software sync is enabled by default. BUG=b:124208414 BRANCH=None TEST=Tested with a system that have a different RW image and verified that this image was overwritten to the one bundled in the BIOS and that the EC was running its RW image. Signed-off-by: Scott Collyer <scollyer@chromium.org> Change-Id: Ic1ffdb62e9fa2cacb3296cb3807082f23e171ab5 Reviewed-on: https://review.coreboot.org/c/31537 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-21ACPI: Correct asl_compiler_revision valueElyes HAOUAS
Change-Id: I91b54b43c8bb5cb17ff86a6d9afa95f265ee49df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-21mb/roda/rk886ex/acpi/superio.asl: Fix copy-paste error on "COMB"Elyes HAOUAS
Error spotted using IASL 20190215: "Object is created temporarily in another method and cannot be accessed" Change-Id: I139c5c7b33671e7ed0c04c06fb290e001e57a687 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-21mb/roda/rk9/acpi/superio.asl: Fix copy-paste error on "COMB"Elyes HAOUAS
Error spotted using IASL 20190215: "Object is created temporarily in another method and cannot be accessed" Change-Id: I7da9dcd68f5eec6383de7370bc8ab35f96a90c06 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-20src/soc/intel/cannonlake: Add _DSM methods for LPIT tableLijian Zhao
This patch adds the _DSM method 5 and 6 for entering and exiting S0ix. The _DSM method gets injected into DSDT table and called from kernel. LPIT table is hardcoded in this patch but the proper way to implement is to use inject_dsdt to make the _DSM methods available for soc's to implement. Calling the LPIT table from mainboard here so that with the current implementation the platforms which do not have lpit support throw compilation error. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ia908969decf7cf12f505becb4f4a4a9caa7ed6db Reviewed-on: https://review.coreboot.org/c/31101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.corp-partner.google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-20sifive/hifive-unleashed: Drop unneeded console_tx_flush()Kyösti Mälkki
Every printk() call already does console_tx_flush() so there should not be anything in transmit buffer when we return from console_init(). Change-Id: Iff2927c02d2c8031907620a056782bb014f20162 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31369 Reviewed-by: Xiang Wang <wxjstz@126.com> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-20mb/google/sarien/variants/sarien: Adjust TP/TS I2C CLK to meet specChris Zhou
After adjustment on Sarien EVT Touch Screen CLK (Elan): 389.7 KHz Touch Screen CLK (Melfas): 377.7 KHz Touch Pad CLK: 385 KHz BUG=b:122657195 BRANCH=master TEST=emerge-sarien coreboot chromeos-bootimage measure by scope with sarien. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: I53b60354e5a7a0ace8efb677775c0a9f8779061d Reviewed-on: https://review.coreboot.org/c/31476 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-18mb/google/sarien/variants/sarien: Update GPIO H3 for DVT1John Su
Follow b:123461432#5 to update GPIO H3(CNVI_EN#) for DVT1. Update setting GPIO H3 to output and low level. BUG=b:123461432 TEST=Built and tested on sarien system Change-Id: I6a56df9a7bf75f49133a646312ae5093c2652698 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-18mb/google/sarien/variants/sarien: Update thermal configuration for DPTFJohn Su
Follow thermal table (b:123383634 comment#1) for EVT1 tunning. BUG=b:123383634 TEST=Built and tested on sarien system Change-Id: I22908e4bf39aedb8cf31a9060084f6f36bff56ca Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-18mb/google/sarien: Swap FMAP location for RW_LEGACY and NVRAMDuncan Laurie
The Intel SOC can only shadow the top 16MB of SPI into memory so in order to make it easier to access the NVRAM region with memory mapped interface move it above the much larger RW_LEGACY region. I tested to confirm that this region can now be read via MMIO interface and does not need to use the hwseq SPI controller. Change-Id: Iafacb01eec07beaf474b6a1f2b36a77117e327da Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-02-18mb/google/sarien: Create VR config settingsRoy Mingi Park
Create VR settings configuration as per board design. BUG=N/A TEST=Build and boot up into sarien platform. Change-Id: Ic196fd80e5211bd5146158d4d340b52c850a4e62 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/c/31404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-18mb/google/kahlee: Enable mode change as wake source for S3Mengqi Guo
This change enables mode change as a wake source for S3. BUG=b:124132058 Change-Id: I95b1eac800858ab17cdf69bdd3f2c5828516c184 Signed-off-by: Mengqi Guo <mqg@chromium.org> Reviewed-on: https://review.coreboot.org/c/31429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-18src/mainboard/kahlee: Remove delan variantMartin Roth
BUG=b:121354442 TEST=None Change-Id: I348c7106772eecd513baf9abe60ef19008d0ba4d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/c/31424 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-18mb/google/sarien/variants/arcada: Update thermal configuration for DPTFCasper Chang
Update dptf for arcada EVT. BUG=b:123924662 TEST=Built and tested on arcada system Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: Ieed8021b83776fdb6320ff89b57c8d2747667fd5 Reviewed-on: https://review.coreboot.org/c/31331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2019-02-18mb/google/laser: Disable touch screen device that according to SKU IDpeichao.wang
We need disable touch screen device on laser SKU ID 6. BUG=none TEST=according to sku_id (Laser(convertible): 5, Laser14(clamshell): 6, Laser14(clamshell + touch):7) distinguish whether disable touch screen device. Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I6953c35a5e8c93d88fe63362156faa351e8ee71f Reviewed-on: https://review.coreboot.org/c/31428 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-15mb/google/hatch: Enable DPTF functionalitySumeet Pawnikar
Enable DPTF functionality on hatch platform. Change-Id: If9ef74364616f95b27b73c39fea42d2623d78ae2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-15src: Use macro `ACPI_FADT_LEGACY_FREE`Paul Menzel
Replace all instances, where 0 is used by the macro/define `ACPI_FADT_LEGACY_FREE`. Change-Id: I226b334620e0cdafc7639c7a76ea3a523ae53a74 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/31289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-02-15mb/google/octopus: Fix USB ACPI configuration for CNVi BT moduleKarthikeyan Ramasubramanian
CNVi Bluetooth module is at port 8 (zero-indexed) and not at port 9. Fix the device configuration in the devicetree. BUG=b:123296264 BRANCH=octopus TEST=Boots to ChromeOS. Checked the SSDT table to ensure that the reset gpio is exported under the device \_SB_.PCI0.XHCI.RHUB.HS09. Ensured that the kernel btusb driver is able to find the exported GPIO in the devices with CNVi BT module. Change-Id: I302bc87b18a1aaad77bfb73d607ba28b89b79c14 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/31387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-15mb/google/sarien: Set ELAN as the default for touch panelChris Zhou
According to request of comment 35, setting ELAN as the default. BUG=b:122019253 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: Iee5e7a21545ca798c0c22f86906acc8e7d81e945 Reviewed-on: https://review.coreboot.org/c/31430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-15mb/google/sarien/variants/sarien: Enable Elan touchscreenChris Zhou
Eanble Elan touch for sarien EVT build BUG=b:119763054 BRANCH=master TEST=Verify touchscreen on sarien works with this change. Signed-off-by: Chris Zhou <chris_zhou@compal.corp-partner.google.com> Change-Id: I790436338705fc9d68f714245e9b9bb518ddb30a Reviewed-on: https://review.coreboot.org/c/31413 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-13mb/google/hatch: Bump up the BIOS region to 28MiBFurquan Shaikh
This change bumps up the BIOS region to 28MiB to use the hole between SI_ALL and SI_BIOS. Since this SPI flash part is 32MiB, only the top 16MiB actually gets memory mapped. Thus, the change ensures that only RW_LEGACY lies in the 12MiB that is not memory mapped. BUG=b:123443737 TEST=Verified that hatch still boots up. Ensured that fmap dump looks correct. Change-Id: I5832d2b89c7eedfc270755e2add16131cfbddff4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-02-13mb/google/poppy/var/rammus: Enable mode change wake source for S3/S0ixFurquan Shaikh
This change enables mode change as a wake source for S3 and S0ix. Change-Id: I2e7f9997776b1e024ea417eb69e6c2ffa8c62580 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/31296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-02-13mb/google/sarien: Support multiple touchscreen at same addressDuncan Laurie
The Sarien board may have different touchscreen devices that use the same I2C slave address but have different requirements such as needing a special driver or ACPI configuration. In order to support this the devicetree may be configured with multiple devices at the same address and at boot time the unused devices will be disabled. Because there is no GPIO for selecting the device that is present it can instead be selected with Kconfig, or by setting a VPD key to the HID of the touchscreen device that is present. The default for Sarien devices is to not enable a touchscreen for the OS. The touchscreen selection is currently limited to the Sarien variant but this also adds the touchscreen HID for Arcada to Kconfig so it would not complain about the key not being set. BUG=b:122019253 TEST=This was tested on a Sarien board by adding a second entry to the devicetree at the same address. Without this change the SSDT is not loaded by the kernel because of the address conflict. After this change no touchscreen is enabled by default, but one can be selected with Kconfig or by setting the 'touchscreen_hid' VPD key. Change-Id: I4da12b1de0c551bcd89325fe0d8c66c6ffeb7afc Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/31295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-13mb/google/sarien/variants/sarien: Add GPIO H3 for DVT1John Su
Follow Northbay and intermal project to add GPIO H3(CNVI_EN#) for DVT1. BUG=b:123461432 TEST=Built and tested on sarien system Change-Id: I580a6e094d84a7bada534b14c2b65ecf4b9942b0 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-13mb/google/sarien/variants/sarien: Add GPIO H15 for DVT1John Su
Follow b:123342945 to add GPIO H15(BT_RADIO_DIS#) for DVT1. BUG=b:123342945 TEST=Built and tested on sarien system Change-Id: I0caf97f6a2a8abf2914667350c76300733ead1b8 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-16 03:41:32 +0000