summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2017-09-13mainboard/intel/cannonlake_rvp: Include ChromeOS supportLijian Zhao
Add ChromeOS support for cannonlake_rvp platform. Change-Id: Ia02407da8ab4aac2c2c33a7796fc71aea12e2925 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13mainboard/intel/cannonlake_rvp: Add dummy DSDT tableLijian Zhao
Add dummy ACPI DSDT table for cannonlake rvp platform. Change-Id: If45c2a7da7f5b20ddd3d56bf9d7f68a85d2f791d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12mb/intel/dg43gt: Fix smbus IRQArthur Heymans
This board uses the reset defaults for DxxIP and DxxIR. The datasheet "Intel ® I/O Controller Hub 10 (ICH10) Family" mistakenly says in the D31IP register that all function have INTB as default. This is however not true as documented in the reset default value. This fixes the DSDT such that the SMBus device gets a route for the INT C interrupt it uses. Change-Id: I3dd1308fb7acec86b90ecd9d2079cf9a58702c40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21442 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-12mb/intel/dg43gt: Select right gmbus port for VGA outputArthur Heymans
TESTED: NGI works on VGA with adapter on DVI-I port Change-Id: I4bd9d451295d26a3e11ded9863f5d45d42c8fead Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-12mb/intel/dg43gt: Configure clockgenArthur Heymans
This makes the VGA output on the DVI-I connector usable. This reuses vendor settings. Change-Id: Ib8b6bf33816f7e468a09ff5e2008c2cb9f7c0a8b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-12AGESA boards: Clean up Ids.h and Filecode.h includesKyösti Mälkki
Change-Id: I9cb63ff58900a39d7cd8e3da2b9a9a95c2a41a69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Drop heapManager.h includesKyösti Mälkki
Change-Id: I1a96b1c6181cd657d7aee82370ef86acd688cc94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA CIMX: Remove empty set_pcie_(de)resetKyösti Mälkki
For boards with cimx/sb800, mainboards defined only empty stubs. Reset functionality is handled as BiosCallout. For amd/inagua, the defined function was actually initial GPIO programming. For cimx/sb700, function had prototypes but no callers. For cimx/sb900, everything was commented out already. Change-Id: I936feb4fc41d903078620c919a733bb9f39c3efb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Clean up some includesKyösti Mälkki
Change-Id: I84c70aa04ab556a3898d3525f7b9aab85812f61d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-11mb/lenovo/*/devicetree: Add BDC detection supportPatrick Rudolph
Add support for BDC detection, based on the schematics for each board. Support for boards without schematics needs further testing. Needs test on all boards. Change-Id: If33ef88fb808f36b050393fa83eb1b541ce936b9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2017-09-11mainboard/intel/cannonlake_rvp: enable eMMCBora Guvendik
Set SCS emmc enable FSP parameter. Change-Id: Ib3d7a305c3bede439249204cf14d50e3eb8b6915 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21409 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-09-11kahlee: Add RO_VPD region in FMAPMarc Jones
The RO_VPD region is required for ChromeOS. BUG=b:65408869 TEST=Build and check coreboot.rom with fmap_decode. Change-Id: I9c475acc5e34a3a41f815990fb1f363963c7b9b9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/21473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-08siemens/mc_apl1: Disable internal UARTsMario Scheithauer
APL internal UARTs are not used on this mainboard. Change-Id: I39118262fc6f37b45785538a3f2d1d31d42cbe86 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-09-08siemens/mc_apl1: Set bus master bit for on-board PCI deviceMario Scheithauer
There is one on-board PCI device where bus master has to be enabled in PCI configuration space. As there is no need for a complete PCI driver for this device just set the bus master bit in mainboard_final(). Change-Id: I45202937eba11da3bea14fef6ebed70599804335 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/21405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-09-06google/gru: Re-enable 3V rail GPIO on ScarletJulius Werner
We've decided to move control for the 3.0V rail (technically 3.3V on Scarlet, but who cares about millivolts) back to a GPIO on the AP for Scarlet rev2. This patch adds the necessary code to enable it and make ARM TF aware of its existence. Since the pin had previously not been connected to anything, we shouldn't really need to guard this by board ID... older Scarlets will just be twiddling an empty pin. Change-Id: I6037aa486b50119f2c7b859b966cadc3686e3459 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/21328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Schneider <dnschneid@chromium.org>
2017-09-06AGESA f14: Work around soft-resetsKyösti Mälkki
Vendorcode expects some DRAM controller registers to be writable, but they are actually locked after soft resets if C6 states are enabled. Without the workaround, raminit fails on soft resets. Change-Id: I6b9e275e11b2907d026c13341334983a4d9c8889 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06mainboard/lippert: Refactor SEMA watchdog messageKyösti Mälkki
It's too critical to ignore when sending the message on SMBus fails, so allow for a fair amount of retries. Failure here causes watchdog to do hard reset later. Move it out of mainboard.c as we need to call this early in romstage while we are debugging. Change-Id: I1006b079269d6dd44de630db7a5694124af2f974 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06asus/kgpe-d16: Add romstage_handoffKyösti Mälkki
Fix regression caused by commit 9e94dbf ACPI: Get S3 resume state from romstage_handoff Boards with EARLY_CBMEM_INIT are required to provide romstage_handoff structure to signal S3 resume path. Change-Id: I7c9065ccc48dfbdefade698ed275756f17dff7a0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06asus/kcma-d8: Add romstage_handoffKyösti Mälkki
Fix regression caused by commit 9e94dbf ACPI: Get S3 resume state from romstage_handoff Boards with EARLY_CBMEM_INIT are required to provide romstage_handoff structure to signal S3 resume path. Change-Id: I464feb1655a51a937b6cf53508dd5c7aa0d8f791 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-09-06asus/kcma-d8 kgpe/d16: Fix regression for shutdownKyösti Mälkki
Fix regression caused by commit: 714709f AMD fam10 ACPI: Use common fixed sleepstates.asl Adding common sleepstates.asl got lost in rebase process. Change-Id: I4f22ee950ae5637113db8e79ca238cb1b81002aa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Iru Cai <mytbk920423@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-06mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codecHarsha Priya
This patch adds imon and vmon slot numbers for Maxim 98927 driver. These values are used to confiure IV feedback for audio playback on speakers. BUG=b:36724448 TEST=After boot, the register dump for Max98927 codecs should have imon and vmon slots numbers set in 0x1e register. Change-Id: I4382da4f984507d147751c168e8177b58c88a70f Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Reviewed-on: https://review.coreboot.org/21196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-06mb/google/soraka: enable AER for PCIe root port 0Rizwan Qureshi
Enable PCIe Advanced Error Reporting for PCIe root port 0. Change-Id: I76742801e84449d0910ddadf31d39597df3263b9 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/21402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06Revert "soc/intel/cannonlake: Add dummy ACPI DSDT table"Kyösti Mälkki
This reverts commit 6c0f3c7ee1d53872851dbab636787852e3572c98. Reason for revert: Broke master builds, this was submitted out-of-order, some of the dependencies have not passed review with +2 yet. Change-Id: Ib7bcb1b98623d16e074caeca839a936d71ded709 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2017-09-06mb/sapphire/pureplatinumh61: Disable the SuperIO serialNicola Corna
There is no serial port on this platform. In addition, put the LPC serial IRQ into quiet mode. Change-Id: I4b2c93c51e8ddb8b510f0d7f7e3072befeba5d95 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/21226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-06soc/intel/cannonlake: Add dummy ACPI DSDT tableLijian Zhao
A dummy DSDT table will be created for cannonlake. Change-Id: Ia435f2a03982313c6b0c63ac25668a3300d08793 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-06arch/x86/Kconfig: Add deprecation warnings for LATE_CBMEM_INITJonathan Neuschäfer
The deprecation of late (post-romstage) CBMEM initialization was announced in this blog post: https://blogs.coreboot.org/blog/2017/05/08/announcing-coreboot-4-6/ There are two warnings: * In LATE_CBMEM_INIT's help text, I've added a multi-line warning, that aims to explain the problem. * In src/mainboard/Kconfig (just below the mainboard selection), there's a warning which points the user at LATE_CBMEM_INIT, if such a board is selected. Also update the function that needs to be implemented, as pointed out by Keith Hui and Kyösti Mälkki. Change-Id: I2d21a6ab2fc2811d44fc4febb05841bb2f8d1857 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-09-06mb/winnet/g170: Drop AMD car.h file from Via mainboardJonathan Neuschäfer
08f7d1ae0d ("mainboard/via*: Drop AMD car.h file") did the same for all Via mainboards that were in tree at that time, but the winnet/g170 was merged a bit later. Change-Id: Iedb33f4c2fce6fc2cf2669fee4ffb25bf793c92b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-09-05mb/google/soraka: Camera PMIC run time power controlNaresh G Solanki
Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-05mainboard/intel/harcuvar: Add support for Intel Harcuvar CRBMariusz Szafranski
The Harcuvar CRB is a reference platform of Intel Atom C3000 SoC ("Denverton" and "Denverton-NS") for the communications segment/market. The MohonPeak coreboot was used as the starting template with additions/modifications from other Intel Apollo Lake/Skylake coreboot. Tested with TianoCore payload (UDK2015) and Poky (Yocto Project Reference Distro) 2.0 with kernel 4.1.8 booted from SATA drive and external USB pendrive. Change-Id: I088833e36e2d22d1fe1610b8dca1454092da511a Signed-off-by: Mariusz Szafranski <mariuszx.szafranski@intel.com> Reviewed-on: https://review.coreboot.org/20862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2017-09-02mainboard/google/fizz: Enable support for DPTFTsai, Gaggery
This patch adds the DPTF settings specfic to the mainboard and enables the CPU and other thermal sensors as participant device for fizz. It also enables the DPTF flag in the device tree for fizz. BUG=b:64915426 BRANCH=None TEST=emerge-fizz coreboot and run DPTF observation tool to make sure DPTF is up and running. Change-Id: Ic7d125a763f539158aa425fbba1d8a000a3465ca Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-09-02mainboard/google/soraka: Remove wacom digitizerWisley Chen
We have no wacom digitizer on I2C#3, so remove it. TEST=build and boot on soraka. Change-Id: I3f5a1b9ece6fc9a9443477c7a7aa77dbcdf6a703 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/21309 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-09-01intel/i440bx: Move LATE_CBMEM_INIT under mainboardKyösti Mälkki
Some of these will move to EARLY_CBMEM_INIT. Change-Id: Ia969e30ad7097860180bd047eaf81859a42a747c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Keith Hui <buurin@gmail.com>
2017-09-01lippert/toucan-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I8fb89fb82c3a3608bb84b29319eb793605538996 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-01lippert/frontrunner-af: Switch away from AGESA_LEGACYKyösti Mälkki
NOTE: Some code was currently left behind that may be required for certain type of board reboots. A followup patch will address this. Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-31google/gru: Support Nefario rev0Philip Chen
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario. Also, remove DVS support for CENTERLOGIC. BUG=b:64702054, b:63537905 TEST=build coreboot Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/21176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-31lenovo/g505s: Switch away from AGESA_LEGACY_WRAPPERKyösti Mälkki
Change-Id: Ia65f9ecb62767424744e399a43e4728666fd28b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Enable XHCI device in devicetreeKyösti Mälkki
Enabling XHCI is additionally controlled with Kconfig option HUDSON_XHCI_ENABLE. Even when it is enabled, it EHCI debug works on the USB port next to the DVD drive door. Change-Id: I83738da6015f58ecd0819c553d333a176365dc78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-31lenovo/g505s: Switch from f15rl to f15tnKyösti Mälkki
Support code for Trinity and Richland is identical now. I have also come across a unit with Trinity model CPU, whose CPUID was not listed in f15rl while f15tn already had support for f15rl. Change-Id: Ia869429b75a9b308b4d4a84f16914ca629b1b1b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-08-30mainboard/google/soraka: Add stop gpio control to touchscreen deviceFurquan Shaikh
BUG=b:64987428 TEST=Verified that touchscreen works on boot-up and after suspend/resume. No power leakage via stop gpio in suspended state. Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-30mainboard/google/soraka: Remove Atmel TouchscreenFurquan Shaikh
We no longer use this touchscreen device, so get rid of it. BUG=b:64987428 Change-Id: I67af787d231317a80998fb483eed5674de19aeb4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-30google/cyan: update SPD functionsMatt DeVillier
Update cyan's SPD-related functions to more closely mirror those of other Braswell boards, in order to simplify the upcoming baseboard/variant setup for Braswell ChromeOS boards. TEST: boot google/cyan, observe SPD correctly identified in cbmem log, RAM-related data correct in SMBIOS tables. Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-30drivers/i2c/ck505: Add generic driver to configure clockgenArthur Heymans
Replaces the ics/954309 driver with a more generic version to accommodate clockgens with a different amount of registers. It also features a mask to only touch certain bits of the clockgen. TODO: set appropriate mask for X60/T60 since the datasheets for their clockgens can be found. Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-30mb/google/eve: rt5514: Add 16ms delay on dmic initDuncan Laurie
Add a 16ms delay to DMIC init by the kernel driver in order to prevent an audible 'pop' noise when starting to record. BUG=b:63413023 TEST=manual testing to ensure this device property is present in SSDT: Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "realtek,dmic-init-delay", 0x10 } } }) Change-Id: If9160ce6992153ba49719029de336595bbf4ae72 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/21271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-29mainboard/google/soraka: Tune I2C params (hcnt, lcnt, hold time)Furquan Shaikh
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the frequency does not exceed 400KHz. BUG=b:35948024 TEST=Verified for 25 iterations that the frequency on each bus ranges <= 400KHz. I2C0: 393 - 397 I2C1: 393 - 400 I2C2: 392 - 400 I2C4: 392 - 400 I2C5: 392 - 400 Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-08-28mb/lenovo/t400/blc.c: Add B141EW05 V3 to whitelistKevin Keijzer
TESTED on Lenovo T400 Change-Id: I365aeb7e997def225c23d3287558bdc4eefa4298 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/21230 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-28google/Bruce: Add Raydium touch screen supportSheng-Liang Pan
Current coreboot does not create ACPI device for OS to recognize Raydium touchscreen. List the touch screen in the devicetree so that the correct ACPI device are created. BUG=b:64705535 BRANCH=master TEST=emerge-coral coreboot Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7 Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com> Reviewed-on: https://review.coreboot.org/21233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-28mainboard/winnet/g170: Add ACPI supportLubomir Rintel
What is present is APIC and legacy interrupt routing and the soft-off sleep state. Other sleep states are missing, so are the SuperIO devices. Boots Linux with and without "noapic" and a Windows XP (installed with factory BIOS, the installer reportedly requires legacy keyboard). Change-Id: Iee3ede8683d1ea51317228d4f782af27043cc945 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Initialize the IRQ routingLubomir Rintel
Initialize IRQ routing for legacy non-PNP OSes the same as the factory firmware would do. Change-Id: I0c7a7d584a2c47471456ab54ef6da815a2dc4e7c Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-28mainboard/winnet/g170: Add WinNET G170 boardLubomir Rintel
Change-Id: I0d7aba827fb87f69f542edd2f7ac7a66d949f865 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/18899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 00:11:20 +0000