summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27mainboard/google/bolt: remove unobtainable mainboardAaron Durbin
The bolt board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15901 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27soc/nvidia/tegra124: remove cache_policiy optionAaron Durbin
All mainboards (nyans) utilizing the cache_policy option has it set to DCACHE_WRITETHROUGH. This option is for setting the framebuffer's cache attribute. However, this option is reliant on an architecture-specific enumeration. Just remove the option and use DCACHE_WRITETHROUGH across the board. If someone wants to reconfigure it at a later date one can introduce a non-architecture specific option. Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-26google/oak: dsi: set mipi pin driving control onMartin Roth
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown(floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeat setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui The original commit in the cros repo combined the chipset and mainboard code changes. This has been split for the push to coreboot.org Change-Id: I733bdd115950b71493856220414ac0dd75d28122 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gale: Fix board ID and GPIO config.Kan Yan
Fix the board ID handling. Recovery switch and WP status GPIO has been reassigned in board rev3. Configure related GPIOs based on Board ID. BUG=chrome-os-partner:55320 TEST=Verified GPIO assignment for Rev.1 board. BRANCH=None Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/361393 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15809 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
1. Remove unused functions/structures. 2. Add checks for NULL return values. 3. Change prefixes to vb2 instead of vboot for functions used internally within vboot2/ 4. Get rid of vboot_handoff.h file and move the structure definition to vboot_common.h 5. Rename all functions using handoff structure to have prefix vboot_handoff_*. All the handoff functions can be run _only_ after cbmem is online. 6. Organize vboot_common.h content according to different functionalities. BUG=chrome-os-partner:55431 Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25skylake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15822 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25intel/amenia: Add chromeos.c to verstageFurquan Shaikh
BUG=chrome-os-partner:55431 Change-Id: I94fe54c12d7438a71f81a9053cc9785c0aa1e6cf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15823 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25google/jecht: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash size accordingly for jecht. BUG=chromium:622501,chromium:628494 BRANCH=none TEST=emerge-jecht chromeos-bootimage CQ-DEPEND=CL:361380 Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818 Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361370 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15806 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-24google/reef: Enable PS/2 keyboard driver by defaultDuncan Laurie
This device has a built-in keyboard that should be enabled by default or it will not work in firmware. This was tested to ensure that TAB (display info) and Ctrl+D (enter developer mode) are functional at the Chrome OS recovery screen. BUG=chrome-os-partner:55549 Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15782 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-22intel/amenia: Write protect GPIO relative to bank offsetsselvar2
Update the write protect GPIO reported in ACPI to GPIO_75. Also update the controller ID to "INT3452:01" which will point at the goldmont device and includes write protect GPIO. BUG=none BRANCH=none TEST=verify crossystem output for wpsw_cur. Change-Id: Id6b172e289976072836746c1814e0300544a06cb Signed-off-by: sselvar2 <susendra.selvaraj@intel.com> Reviewed-on: https://coreboot.intel.com/7771 Reviewed-by: Sparry, Icarus W <icarus.w.sparry@intel.com> Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15496 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22google/reef: Update gpio config for audioSathyanarayana Nujella
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15433 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22soc/intel/apollolake: clarify meaning of LPDDR4 density meaningAaron Durbin
The 'dram density' is a misnomer because the memory initialization code treats that input parameter as a per rank density. Therefore, update the variables to further clarify how it's actually being used. BUG=chrome-os-partner:55446 Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15773 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-22mainboard/google/reef: indicate dual rank LPDDR4 skusAaron Durbin
The 16Gb devices use two ranks per channel within the DRAM module. However, the density settings are really on a per rank basis so indicate dual rank with a device density of 8Gb. BUG=chrome-os-partner:55446 Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15772 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-21mainboard/google/reef: handle eMMC power signal polarity changeAaron Durbin
The EVT board uses an active high power control signal while the previous board used an active low signal. Update the tables to reflect the differences. BUG=chrome-os-partner:55470 Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21mainboard/google/reef: reverse the memory config bitsAaron Durbin
I mistakenly assumed the order of the bits matched how one would assign values as they wrote them msb .. lsb. However, the gpio lib doesn't do that. Correct the order so that values are read out correctly. BUG=chrome-os-partner:54949t Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15753 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21timestamp: Drop duplicate TS_END_ROMSTAGE entriesKyösti Mälkki
This entry gets added in run_ramstage(). Change-Id: I18cda4ead3614c6d07c3269cbee53e6def6408c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15755 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-20google/reef: Add wake signal for trackpadFurquan Shaikh
EVT has a wake signal for track pad which is routed to GP_15. BUG=chrome-os-partner:54960 Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15723 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-20amd/db-ft3b-lc: Add board supportKyösti Mälkki
Change-Id: Ibab9039306730bfd3063b34cf085e854e4608902 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-07-20amd/db-ft3b-lc: Copy of amd/olivehillplusKyösti Mälkki
Change-Id: I70330278bae54392e236d762716ba7c4d39a05a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14969 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-19intel/amenia: Add DA7219 support in acpiHarsha Priya
Add DA7219 support in acpi. DA7219 has advanced accessory detection functionality. Also add DA7219's AAD as a ACPI data node. Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45021 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15625 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-19mainboard/google/reef: explicitly set shipping Chrome OS optionsAaron Durbin
The Chrome OS options that will be shipped on this platform were being set in the chromium repo with an external config file. Set the options in the mainboard Kconfig file so there's no discrepancy as to what will be used. Change-Id: I05f0d1245611c16f54273728519a08e6edff3429 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15733 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-18google/oak & elm: initialize touchscreen reset gpioYH Huang
In order to save power in S3, we remove reset gpio setting in kernel. We still need to initialize touchscreen ic. Do it by pulling low reset gpio for 500us and then pulling high in firmware. BRANCH=none BUG=chrome-os-partner:55170 TEST=build on elm. Change-Id: Idbe0175a1fc1fa0b05e81706194c79d52c6101f6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f40cc9a22c2551c2c9455cb8b60f36353602bca6 Original-Change-Id: If2ac815c4fd5c5ae15443348a49eb31449b724b1 Original-Signed-off-by: YH Huang <yh.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360312 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Johnny Chuang <johnny.chuang@emc.com.tw> Reviewed-on: https://review.coreboot.org/15719 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-18gru: implement hw reset functionVadim Bendebury
Asserting this GPIO will send a signal to the EC to trigger a reset for the AP and the CR50. BRANCH=none BUG=chrome-os-partner:55252 TEST=the device now reboots when it needs to switch between different boot modes instead of hanging with "failed to reboot" message. Change-Id: I8d168e313b6983c96c80f7ad6d70bb84c1ec1d9c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 83a4c8ff68ab24a103f2166e948eb23624ea97f7 Original-Change-Id: Idfd20977cf3682bd8933f89e8eec53005e55864e Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/360238 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15718 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-07-17mainboard/amd: add support for F2950 system boardAndrey Korolyov
F2950 SBC, also known as TONK 1201/TONK 1202, was originally produced as a Centerm F2950 using DB800 reference design. Common configuration does include a 600 MHz GeodeLX CPU underclocked to 500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and 128 or 512 MB IDE DOM. The board does have three USB 2.0 ports (none of them possessing debug capabilities), PS/2, VGA, Geode audio in/out and the serial port. EEPROM needs to be soldered out and flashed externally at the time of this message because flashrom would neither be able to dump BIOS correctly while running vendor BIOS nor write flash contents. All peripherals were tested against Linux 3.16 and seem to work flawlessly. At the moment of this commit coreboot does not pass PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby preventing VGA OPROM from being executed. This would be fixed in the SeaBIOS itself or in a subsequent commit. As a workaround, user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4 Reviewed-on: https://review.coreboot.org/15565 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-15intel/amenia: Add wake-up from lid openShaunak Saha
This patch adds support to wake up from S3 on lidopen. mainboard.asl has the _PRW defined for the wakeup support in S3. BUG = chrome-os-partner:53992 TEST = Platform wakes up from S3 on lidopen. Change-Id: I48b456baf5f7e1c2f28454fa66bb90ad761bb103 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15618 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15soc/intel/apollolake: Consolidate ISH enablingAndrey Petrov
Since the Integrated Sensor Hub can be disabled through devicetree.cb as a PCI device, there is no need for a separate register variable. Remove handling the register and update mainboards' devicetrees. Also keep ISH disabled on both Reef and Amenia. Change-Id: I90dbf57b353ae1b80295ecf39877b10ed21de146 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15710 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15google/reef: Add wake-up from lid openShaunak Saha
This patch adds support to wake up from S3 on lidopen. mainboard.asl has the _PRW defined for the wakeup support in S3. BUG = chrome-os-partner:53992 TEST = Reef board wakes up from S3 on lidopen. Change-Id: Ic3bae26cea0642f98d938b3523d08f5902a1f4b5 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-15mainboards/skylake: use common Chrome EC SMI helpersAaron Durbin
Reduce duplicate code by using the Chrome EC SMI helper functions. BUG=chrome-os-partner:54977 Change-Id: Ie83e93db514aa0e12e71d371d7afab34a70797fd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15689 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-15mainboards/apollolake: use common Chrome EC SMI helpersAaron Durbin
Reduce duplicate code by using the Chrome EC SMI helper functions. BUG=chrome-os-partner:54977 Change-Id: Iba2ca7185ad7f0566858ce99f5ad8325ecc243cf Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15687 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com>
2016-07-15mainboards: remove direct acpi_slp_type usageAaron Durbin
Use the acpi_is_wakeup_s3() API instead of comparing a raw value to a global variable. This allows for easier refactoring. Change-Id: I2813b5d275cbe700be713272e3a88fdb5759db99 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15690 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2016-07-15mainboards: align on using ACPI_Sx definitionsAaron Durbin
The mainboard_smi_sleep() function takes ACPI sleep values of the form S3=3, S4=4, S5=5, etc. All the chipsets ensure that whatever hardware PM1 control register values are used the interface to the mainboard is the same. Move all the SMI handlers in the mainboard directory to not open code the literal values 3 and 5 for ACPI_S3 and ACPI_S5. There were a few notable exceptions where the code was attempting to use the hardware values and not the common translated values. The few users of SLEEP_STATE_X were updated to align with ACPI_SX as those defines are already equal. The removal of SLEEP_STATE_X defines is forthcoming in a subsequent patch. BUG=chrome-os-partner:54977 Change-Id: I76592c9107778cce5995e5af764760453f54dc50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15664 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-15Google Mainboards: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images will be moved to CBFS from GBB. This patch adjusts the flash map accordingly for rambi, samus, peppy, parrot, falco, panther, auron, and strago. BUG=chromium:622501 BRANCH=tot TEST=emerge-{samus,falco} chromeos-bootimage CQ-DEPEND=CL:354710,CL:355100 Change-Id: I6b59d0fd4cc7929f0de5317650faf17c269c4178 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 201a82311ba539b9b02d546ba331ff5bf73e0edf Original-Change-Id: I0b82285186540aa27757e312e7bd02957f9962ec Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/355040 Reviewed-on: https://review.coreboot.org/15658 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-14spike-riscv: Look for the CBFS in RAMJonathan Neuschäfer
Change-Id: I98927a70adc45d9aca916bd985932b94287921de Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15285 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-07-14spike-riscv: Register RAM resource at 0x80000000Jonathan Neuschäfer
Without this patch, the CBFS loader won't load segments into the RAM. Change-Id: If05c8edb51f9fe2f7af84178826f93b193cfd8a9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15511 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-14siemens/mc_bdx1: Add usage of external RTC PCF8523Werner Zeh
This mainboard contains an external RTC chip PCF8523. Enable usage of this chip and add some initialization values to device tree. Change-Id: I25c0a017899ee904f3aa02bdc7dcaf61dee67e3a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/15642 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-14intel/amenia: Add mainboard SMI handlerShaunak Saha
This patch adds a mainboard SMI handler file which has functions to set proper Wake mask before going to sleep so that system can wake up on lidopen, key press etc. Also SCI mask is set on boot which will enable timely update of battery UI on charger connect/disconnect. BUG = chrome-os-partner:53992 TEST = Amenia platform wakes from S3 on lidopen, key press and also sysfs entry for AC is updated on charger connect/disconnect. Change-Id: If3dc6924c51c228241b7a647566b97398326ec0e Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15616 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14google/reef: Add mainboard SMI handlerShaunak Saha
This patch adds a mainboard SMI handler file which has functions to set proper Wake mask before going to sleep so that system can wake up on lidopen, key press etc. Also SCI mask is set on boot which will enable timely update of battery UI on charger connect/disconnect. BUG = chrome-os-partner:53992 TEST = Reef Platform wakes from S3 on lidopen, key press and also sysfs entry for AC is updated on charger connect/disconnect. Change-Id: I8c087994b48223b253dcf1cbb3ed3c3a0f366e36 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15615 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14intel/amenia: Add Maxim98357a supportHarsha Priya
Adds Maxim98357a support for amenia using the generic driver in drivers/generic/max98357 Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a518f1 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15624 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14google/reef: Enable touchscreen in ACPIFurquan Shaikh
Add support for ELAN touchscreen on I2C3. Change-Id: Id8b07a3a3fd4beca0d7ce804ba8d6859275c70d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15499 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-14intel/amenia: Update gpio config for audioHarsha Priya
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983b6 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15623 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-13gru: Enable TPM2Vadim Bendebury
Gru and derivative boards use TPM2 to support Chrome OS verified boot. BRANCH=none BUG=chrome-os-partner:50645 TEST=re-built Kevin firmware, verified that TPM2 support over SPI is enabled, and that with appropriate vboot and depthcharge patches applied the device can boot into chrome os properly verifying RW firmware and kernel key indices. Change-Id: Id14a51cea49517bd2cc090ba05d71385aad5b54c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 60e229d93d7e219e261b851f654e459eb2cf4f41 Original-Change-Id: Ic6f3c15aa23e4972bf175b2629728a338c45e44c Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/354781 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: https://review.coreboot.org/15606 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13oak/gru: Fix derivative KconfigsJulius Werner
Add a few missing Kconfig defaults for derivatives of the Oak and Gru baseboards. Also group all Kconfigs that must change for derivatives together for easier updating. BRANCH=None BUG=None TEST=None Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/357922 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15605 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-13mainboard/intel/amenia: use new gpio interrupt macrosAaron Durbin
Utilize the new interrupt macros in order to specify correct polarity of the gpio interupts. Some of the interrupts were working by catching the opposite edge of the asserted interrupt. BUG=chrome-os-partner:54977 Change-Id: I55bee2c4363cfdbf340a4d5b3574b34152e0069c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-13mainboard/google/reef: use new gpio interrupt macrosAaron Durbin
Utilize the new interrupt macros in order to specify correct polarity of the gpio interupts. Some of the interrupts were working by catching the opposite edge of the asserted interrupt. BUG=chrome-os-partner:54977 Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15645 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-07-13intel/amenia: Disable unused PCIe portsJagadish Krishnamoorthy
Disable PCIe A0, A1, A2, A3, B1 ports. Enable B0 port which is used for wifi. BUG=chrome-os-partner:54288 BRANCH=None TEST=lspci should show only PCIe B0 device Change-Id: I266d6eb7ddd56888f6b07b59681c2d9f0a6c0a9e Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15599 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-13FSP1_0 does not support HAVE_ACPI_RESUMEKyösti Mälkki
FSP1_0 places romstage ram stack at fixed location of RAMTOP in low memory before returning to coreboot proper. There is no possibility of making a complete backup of RAMBASE..RAMTOP region and currently such backup is not even attempted. As a conclusion, S3 resume would always cause OS memory corruption. Change-Id: I5b9dd4069082e022b01b0d6a9ad5dec28a06e8b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-12Documentation: Fix doxygen errorsMartin Roth
Change-Id: I195fd3a9c7fc07c35913342d2041e1ffef110466 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 01:44:12 +0000