summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-03-29nb/intel/haswell: Implement proper backlight PWM configNico Huber
Further backport the backlight-PWM handling from Skylake. Beside configuring the PWM frequency in Hz, we also use the PCH's logic for the brightness setting via BLM_PCH_OVERRIDE_ENABLE. Linux would toggle it anyway and that might confuse our ASL code. We assume that the 183Hz value that was set before for Slippy variants was overridden by Linux with the 200Hz VBT value, like it was for the Broadwell Chromebooks. So we set 200Hz for them in the devicetrees. The calculated value for the T440p of 220Hz seems sane and also matches the VBT. Change-Id: I17dfe1a3610d5e2918c617cf5d10896692fdccb3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/google/cyan: Clean up KconfigMatt DeVillier
Cyan has no VGA BIOS available (at least not publicly), so remove related options. Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Change-Id: Ic079a39ca5ad0ac653b52248244b94d4bfbd08a4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39872 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/51nb/x210: Fix up USB ports in devicetreeMatt DeVillier
Add missing port definition for the mSATA/WWAN mPCIe port, set OC pin for internal ports to OC_SKIP, fix port descrption for mPCIe/WLAN port, remove USB3 definition for right type-A port as it is USB2 only. Test: insert WiFi module into WWAN port, observe BT portion detected and functional. Change-Id: Ie39b99eeb0f605ff07d57c32189fb1f4183713e4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29hatch: Create sushi variantPaul Fagerburg
Create the sushi variant of the hatch reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 3.0.0). BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SUSHI Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-26mb/intel/cedarisland_crb: Add Cedar Island CRBAndrey Petrov
Just a minimal set of board files needed to get it to boot in 1 CPU mode. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: Ie2f944964e938d8026a6d5d8a22a8449199d08aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/39714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-26mb/ocp/tiogapass: Properly configure early serial outputAndrey Petrov
Tioga Pass comes with AST2500 BMC which offers SuperIO functionality. However we currently do not configure/enable SuperIO chip. As a result system boots pretty silently on cold boot. Then FSP configures SuperIO and resets the system so on next boot serial console does work. This makes debugging difficult because pre-FSP output is invisible. This patch enables bootblock to properly configure desired BMC SuperIO port so early serial output is visible. TEST=do a cold boot on OCP Tioga Pass, observe bootblock output starting from bootblock. Change-Id: Iff8e6a862858d733f529bb9b8c65e22e5ec6b521 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-03-26mb/intel/jasperlake_rvp: add display related UPD configsRonak Kanabar
Change-Id: Iad0b394dea017223a5b92fff0cb4c2ed1d5a7bd7 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39402 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/intel/jasperlake_rvp: Correct Kconfig optionsMaulik V Vaghela
1.Select CHROMEOS_EC related Kconfig for variant board with external EC support. 2.Select proper CHROMEOS Kconfigs which are required for all variants. 3.Disable Intel EC region in case of external EC. BUG=None BRANCH=None TEST=Compilation is successful for both Jasper Lake RVP variants. Change-Id: I290b3748777e18476651101de71df9080dd3105c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39584 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/dedede: Query the EC for board versionDtrain Hsu
The board version is part of EC's EEPROM, select Kconfig item to enable requesting the EC for board version. BUG=b:152374066 TEST=Verified the mainboard version is from EC's EEPROM. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Idd8aceed83439cb500e2b03153e9f8ba93979ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/volteer: Use tabs for indentsElyes HAOUAS
Change-Id: I7304b06d7bf34fb7126acfdef811481dc5cba598 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26mb/facebook/monolith: Update GT-Sliced icc_maxWim Vervoorn
Update the icc_max for the GT-Sliced VR domain according to the hardware design. BUG=N/A TEST=build Change-Id: Ib9f7d77d144a282214e6bda8a4e836873c395487 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39804 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. Adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn V.2: Fixup a code comment typo while we are here. V.3: Vary special casing semantics for idx==0 => default mac addr is set. V.4: Rework to still support the legacy path. BUG=b:152157720 BRANCH=none TEST=none Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26soc/intel/xeon_sp: Refactor code to allow for additional CPUs typesAndrey Petrov
Refactor the code and split it into Xeon common and CPU-specific code. Move most Skylake-SP code into skx/ and keep common code in the current folder. This is a preparation for future work that will enable next generation server CPU. TEST=Tested on OCP Tioga Pass. There does not seem to be degradation of stability as far as I could tell. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I448e6cfd6a85efb83d132ad26565557fe55a265a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39601 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25create stdio.h and stdarg.h for {,v}snprintfJoel Kitching
Sometimes coreboot needs to compile external code (e.g. vboot_reference) using its own set of system header files. When these headers don't line up with C Standard Library, it causes problems. Create stdio.h and stdarg.h header files. Relocate snprintf into stdio.h and vsnprintf into stdarg.h from string.h. Chain include these header files from string.h, since coreboot doesn't care so much about the legacy POSIX location of these functions. Also move va_* definitions from vtxprintf.h into stdarg.h where they belong (in POSIX). Just use our own definitions regardless of GCC or LLVM. Add string.h header to a few C files which should have had it in the first place. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I7223cb96e745e11c82d4012c6671a51ced3297c2 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-25superio/nuvoton/nct5104d: add chip config option to reset GPIOsMichał Żygowski
Define a chip option to explicitly soft reset all enabled GPIOs to default state. TEST=boot FreeBSD 11.2 on PC Engines apu1, change GPIO configuration using nctgpio module and check whether GPIOs are reset after reboot Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iae4205574800138402cbc95f4948167265a80d15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-25mb/facebook/monolith: Configure COMB to 0x3e8Wim Vervoorn
The 2nd COM port's base address defaults to 0x2f8. Current software for this system expects the port at 0x3e8. Configure COMB to use 0x3e8 instead of 0x2f8. BUG=N/A TEST=tested on facebook monolith Change-Id: Ibb462bad5f0594e0b5c8dea6e02cd42d58d999ab Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25mb/intel/jasperlake_rvp: Update FMAP for jslrvpMeera Ravindranath
Remove unused SMM_STORE space and use it for RW_LEGACY area BUG=None TEST=None Change-Id: I5724b860271025e8cb8b320ecbd33352ef779660 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-03-25mb/google/dedede: Update EC_MKBP_INT_L configurationKarthikeyan Ramasubramanian
The concerned GPIO is configured as an open drain at the Embedded Controller side without an external pull-up. This causes leakage in the PP3300_A rail. So configure the GPIO to have a weak internal pull-up at the SoC side. BUG=b:151680590 TEST=Build the mainboard. Ensure that there are no leakages in the PP3300_A rail. Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25mb/intel/jasperlake_rvp: Add config check for lid switchMaulik V Vaghela
We should only define function to get lid switch and recovery mode switches when CHROMEEC_SWITCHES is not available. Correct this to avoid compilation issues BUG=None BRANCH=None TEST=jslrvp code compilation is fine Change-Id: I2445d40da1540c9d8c8c5fc845a4f38a5abf983e Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39585 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/intel/jasperlake_rvp: Add memory config for Jasper Lake RVPRonak Kanabar
Add memory initialization parameters for Jasper Lake RVP boards Jasper Lake RVP supports two variants, one with memory LPDDR4 and another with DDR4 Based on board id, mainboard will pass correct memory parameters to the fsp. BUG=None BRANCH=None TEST=Check compilation for Jasper Lake RVP and check memory training passes. Change-Id: Idc92363a2148990df16c2068c7986013d015f604 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39195 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25acpi: correct the processor devices scopeMichał Żygowski
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here. Additionally add processor scope patching for P-State SSDT created by AGESA, becasue AGESA creates the tables with processors in \_PR scope. TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are no errors, decompile ACPI tables with acpica to check whether the processor scope is correct and if IASL does not complain on wrong checksum, run FWTS Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/ocp/tiogapass: Enable IPMI KCSJohnny Lin
A bigger than zero value of bmc_boot_timeout must be set for KCS ipmi_get_bmc_self_test_result() to run, otherwise the self test result will be error and won't write SMBIOS type 38 table. Here we set 60 seconds as the maximal self test timeout. Tested=Check if the BMC IPMI response data and SMBIOS type 38 on OCP Tioga Pass are correct or not. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-25mb/pcengines/*/devicetree: remove non-existing NCT5104d LDN 0xeMichał Żygowski
Nuvoton NCT5104d has no LDN 0xe according to its datasheet. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0d34218d88b779b08c380d2396ff9ab9253597fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/38851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-25mb/pcengines/apu2: enable PCIe power management featuresMichał Żygowski
Enable ASPM L0s and L1, Common Clock and Clock Power Management for all PCIe ports. TEST=boot Debian linux and check new PCIe capabilities appear in lspci Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0a4c83731742f31ab8ef1d326e800dfdc2abb1b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-25mb/pcengines/apu2: add reset logic for PCIe slotsMichał Żygowski
PC Engines apu2 had many problems with PCIe cards detection. The cards were inconsistently detected when booted from G3, S5 or after a reboot. AGESA can reset PCIe slots using GPIO via callback. Use it to reset the slots that support using GPIO as reset signal. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I8ff7db6ff85cce45b84729be905e6c895a24f6f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma/acpi: Reduce display switching stubsNico Huber
_DCS, _DGS and _DSS are required by specification. However, we never implemented them properly, and no OS driver com- plained yet. So we stub them out and keep the traditional behavior in case an OS driver checks for their existence. The old implementations also only returned static values as there never was any write to their GNVS variables. The TRAP() that was called in one place is actually implemented by some ThinkPad's SMI handler as docking event. However, as the call precedes these SMI handlers in coreboot history, it's most likely an accident. Change-Id: Ib0b9fcdd58df254d3b2290900e3bc206a7abd92d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23mb/pcengines/apu2/mptable.c: add GNB IOAPIC to MP TableMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I385339761b3e1b5dcadb67b8ca29b1518c2db408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-23acpi: Change Processor ACPI Name (Intel only)Christian Walter
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here for Intel CPUs only. Tested on: * X11SSH (Kabylake) * CFL Platform * Asus P8Z77-V LX2 and Windows 10 FWTS does not return FAIL anymore on ACPI tests Tested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23mb/gigabyte/ga-h61m-ds2v: Fix PCIe port numbersAngel Pons
A certain somebody (that would be me) forgot how to count, it seems. Change-Id: Iac0ac5827ca242c465a2e8be92a823c8fc9b2935 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39741 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61ma-d3v: Correct PCIe port setupAngel Pons
Coalescing is not needed, as all PCIe ports are used. Change-Id: Icf31f6672e0a54d119a6537da1b52c42f9cee823 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39740 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61m-*/devicetree.cb: Add missing IRQAngel Pons
IRQ 0x70 was not declared for device 2e.7, and coreboot whined about it. Change-Id: If40aa390722cf253169003129b31f20543fde5dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39739 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61ma-d3v: Correct subsystem IDAngel Pons
Linux does not handle either value in any special way, though. Change-Id: I833cb94e65b9ddfb79edbcdd0216c70740aa4a16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23src/mb/google/volteer: Add camera ACPI configurationDaniel Kang
Add camera ACPI configuration for Ripto/Volteer BUG=None BRANCH=None TEST=Build and boot Ripto or Volteer. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I2b47ccd989192273a29f09bf097e12e357929334 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
This is required for PD notifications on the cros_ec driver. BUG=b:150649744 TEST=Boot volteer with this patch and verify that PD notifier events are being generated. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23mb/pcengines/apu1/mainboard.c: Add SMBIOS type 16 and 17 entriesMichał Żygowski
Use information provided by AGESA to fill the SMBIOS memory tables. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id73de7c2b23c6eb71722f1c78dbf0d246f429c63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-23mb/tglrvp: Update Audio AIC settings for Tiger LakeSrinidhi N Kaushik
Update Audio AIC UPD settings and gpio pad configs for Tiger Lake. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I45935b79f6fa4ad66238eead9258a4f15feec508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23src/mb/intel/tglrvp: Fix board config flag for TGL-UP4 camera ACPIDaniel Kang
Camera ACPI had an incorrect board config flag for TGL-UP4. BUG=None BRANCH=None TEST=Build and boot TGLRVP-UP3 or UP4. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ided0e146a9240169d3f1f27a86218ac1a942b899 Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/dedede: Update SPD index for waddledeeKarthikeyan Ramasubramanian
Micron memory part uses SPD Index 0. BUG=b:152005386 TEST=Build the mainboard. Change-Id: I990a95b13d636148f0f922fd5c6d4e489d35ed2c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23src: capitalize 'APIC'Elyes HAOUAS
Change-Id: I487fb53bb2b011d214f002fc200ade2f128a4cc6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-20mb/google/dedede Add Audio support for waddledooAamir Bohra
1. Configure Audio GPIOs. 2. Set i2c4 configuration. 3. Update PCH HDA configuration TEST=Verify codecs gets listed with aplay -l command. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Change-Id: Ic0516c7a8fee79ce17343a7f42895d6ef534fec9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-onlyAngel Pons
Change-Id: I005bf205142d4d8c5e12378f33d2100d278fa174 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-or-laterAngel Pons
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/**/gma-mainboard.ads: Remove copyright statementsAngel Pons
They are already in AUTHORS. Change-Id: I315c0c57babfa239e3d7c501a4183b8996999e6e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/google/nightfury: Update overridetree.cbSeunghwan Kim
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury BUG=none BRANCH=firmware-hatch-12672.B TEST=built and verified touchpad and touchscreen worked Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-20mb/hp/z220: Fix VGA graphics initPatrick Rudolph
The VGA port has the DDC on port B. Select the correct Kconfig and fix graphics init failing on VGA. Tested on HP Z220, libgfxinit reports success and SeaBIOS is displayed on the connected VGA monitor. Change-Id: Ie5ec1a2d4606a21e1dc4217ff6fefe5ee35ac543 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 23:19:30 +0000