summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-07-28mb/amd/mandolin: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
This applies what commit 79572e4f32f844f60338d1aafdba6b94f4111a5c does to the devicetree settings of amd/mandolin. Change-Id: I6cc0a2b60b13a809016225caf3c89f730deb4ce0 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28mb/prodrive/hermes: Relocate device enable optionsFelix Singer
Since there aren't any other variants, we can move things between the devicetree and the overridetree. Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change. Change-Id: I54aac67237a3850dbf11f58bd41aba87505214f3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43927 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28mb/prodrive/hermes: Add ME interface numbers to commentsFelix Singer
Change-Id: Ief8d53b79918d4d68bf10650ff796a27b67d862b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28mb/system76/lemp9: Relocate device enable optionsFelix Singer
Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change. Change-Id: I655bc7576e8ff48258a2a19387e01372f4bbea3d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-28mb/google/volteer: sync'ing todor with terradorYH Lin
Todor is created to take the place of terrador therefore copying terrador content into todor's setup. BUG=b:162110806 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TODOR Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I63151728a04f2252ca8a77158a2656ad8b1e1b51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-07-28mb/google/volteer: Create todor variantYH Lin
Create the todor variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). In addition, * sort the variant names in alphabetical order. * todor uses the same config options as terrador. BUG=b:162110806 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TODOR Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I7aa7acf1f3c3cc14b92ded05d5868818a627a432 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-28mb/ocp/deltalake: use common driver to configure GPIOBryant Ou
Use the common driver to configure the GPIOs on the Delta Lake platform as done for Tioga Pass in commit 89d2aa0. The GPIO settings are dumped by inteltool with original UEFI firmware, then use intelp2m to generate header file. TEST=Dump GPIO settings by Intel ITP and check if match gpio.h. Change-Id: I8005d4caa2d87b6831099bfec3a40246224f3cb5 Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
All boards disable PIRQs, except purism/librem_bdw. Since IRQ0 is invalid and modern OSes don't use PIRQ routing, disable the PIRQs. Change-Id: I93b074474c3c6d4329903cab928dc41e1d3a3fb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28lynxpoint: Factor out PIRQ routing from devicetreeAngel Pons
All boards disable PIRQs. They aren't used on modern OSes anyway. Change-Id: I1351fd4a3910e8cf2e9afe51dc2e82c7464de403 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28volteer: Create eldrid variantMiceLin
Create the eldrid variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:162115131 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_ELDRID Signed-off-by: MiceLin <mice_lin@wistron.corp-partner.google.com> Change-Id: I1cd07ee7a87335e1e0b51d65c26bffc3bc46037c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-27mb/amd/mandolin: add USB over-current pin mapping to devicetreeFelix Held
The over-current pin mapping matches the board schematics. Change-Id: I23fd208680dcb52f5adaa144f00cb46bc7a21b91 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-27mb/google/hatch: Add smart battery I2C passthrough for DratiniTim Wawrzynczak
Some smart battery patches have been backported to the ChromeOS 4.19 kernel, and userspace can now access smart battery data from sysfs instead of using the hacky ectool instead. Also change all space indents into tab indents while we're here. BUG=chromium:1047277 TEST=confirmed a /sys/class/power_supply/sbs-i2c device shows up Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I43687e63e4c1a7756c117129ced20749afc1b9e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/escheKevin Chiu
LPDDR4x DRAM table for burnet/esche: [1] = "sdram-lpddr4x-H9HCNNNCPMALHR-4GB" [2] = "sdram-lpddr4x-MT53E1G32D4NQ-4GB" [3] = "sdram-lpddr4x-K4UBE3D4AA-MGCL-4GB" [4] = "sdram-lpddr4x-H9HCNNNCPMMLXR-NEE-4GB" BUG=b:161768221,b:159301679 BRANCH=master TEST=emerge-jacuzzi coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ida7ab877c3f7e10a67680b69a1d724ec734d2928 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-27mb/google/volteer: Add gpio-keys ACPI node for PENHAlex Levin
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. Removal and insertion (both edges) triggers IRQ and only removal is a wake event (rising edge). Adding for both Volteer and Volteer2 variants. BUG=b:146083964 BRANCH=None TEST=tested on a Volteer Change-Id: Ida3217a5b156320856ce3302c2623eba2230f28d Signed-off-by: Alex Levin <levinale@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43764 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/google/volteer: Modify Delbin variantKane Chen
Update delbin configuration include GPIO, memory SPD table, I2C devices and USB type C. BUG=b:158797761 BRANCH=None TEST=emerge-volteer coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I59ce4720e0ffeeeb2c9440bb300686def80211ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/42301 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/google/dedede: Remove Rcomp resistor and target valuesMeera Ravindranath
MRC automatically detects the DDR type and sets Rcomp resistor and target values for JSL and does not require explicit programming. Change-Id: Ia130765e2cb91d6a39ad00ebbab20e7e87fa42d1 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-27dedede: Create magolor variantRen Kuo
Create the magolor variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:58540772 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MAGOLOR Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3e39e650b82a0aa629a48a00227700b058effb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-26mb/intel/cedarisland/Makefile: Add missing ramstage.cMaxim Polyakov
Fixes a bug in Makefile.inc, which did not allow building ROM image with ramstage.c from motherboard configuration. Change-Id: I70d8a2e1f53e2fa56d514361116a55f175407753 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43457 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/*/*/devicetree.cb: Normalize disabled PIRQ valuesAngel Pons
If bit 7 of a PIRQ route is set, it is disabled. Modern OSes don't use PIRQ routing, so we might as well zero the other bits for consistency. Tested on Asrock B85M Pro4 with SeaBIOS 1.13.0, still boots. Change-Id: I78980b9ea5e878a6200df0f6c18c5e7d06a7950a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43861 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/lenovo: Prepend EC event number with 0x to denote hex notationPaul Menzel
Currently, the message below is printed, suggesting it’s decimal notation: coreboot-4.12-1530-g7acbd5fc45 Sun Jul 19 07:47:58 UTC 2020 smm starting (log level: 7)... EC event 48 GPI (mask 1000) Prepend 0x, so it’s clear it’s hexadecimal notation. EC event 0x48 Use the command below change all places: git grep -l 'EC event %02x' | xargs sed -i 's/EC event %02x/EC event %#02x/' Change-Id: I8d1e6434a0e550c5a19576f9f7fea05e7a812e49 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/asrock/h110m: undo set trig and bufdis for NF padsMaxim Polyakov
According to the documentation [1], RX Level/Edge Configuration (trig) and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable in native mode and BIOS does not need to configure them. Therefore, there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG macros. Use PAD_CFG_NF instead and set this fields to 0. [1] Intel document #549921 [2] Intel document #336067-007US This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: I6a6b745bdaacb1c4fbf032e4ce54cb25a72d790a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43561 Reviewed-by: Michael Niewöhner Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/ocp/tiogapass/gpio: undo set trig and bufdis for NF padsMaxim Polyakov
According to the documentation [1], RX Level/Edge Configuration (trig) and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable in native mode and BIOS does not need to configure them. Therefore, there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG macros. Use PAD_CFG_NF instead and set these fields to 0. [1] Intel document #549921 [2] Intel document #336067-007US This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: Icdb6cb39934548e125461929701b33477a74f2a2 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43454 Reviewed-by: Michael Niewöhner Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpadDavid Wu
Update ELAN i2c-hid touchpad configuration BUG=b:160741785 BRANCH=None TEST=Verify touchpad is working fine. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I098d8a305c6e04af1562a545ff4af6383665798b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-26mb/purism/librem_skl: Disable CLKREQ for NVMeMatt DeVillier
This effectively reverts commit 5086ccef (mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe). Some Librem 15v3/v4 boards are showing issues with NVMe detection or booting via SeaBIOS, so revert this until a proper fix can be found. Test: build / successfully boot Librem 15v4 with problematic NVMe drive. Change-Id: I0659f77bbe693f3d3b192a28ff3ef013658930cc Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43490 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
For devices sharing same firmware, there may be few customization based on SKU ID - for example being clamshell or form factor. On Kukui and Jacuzzi platforms the SKU ID is defined on AP SOC, so we have to send the information to EC. BUG=b:161767717 TEST=make -j # builds and boots on Juniper BRANCH=kukui Change-Id: I8ffdd9fd1e609c1dd4b0e22dc7aab560ccdc842e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43788 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/mainboard/dedede: update GPIO table for Botenyan.liu
Adjust GPIO setting to match boten design BUG=b:160741777 BRANCH=NONE TEST=Add gpio.c for boten Signed-off-by: Yan Liu <yan.liu@bitland.corp-partner.google.com> Change-Id: I4eafee608f657f8ec5a06caf6e99b08b3330512b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43277 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede: Change HDMI DDC GPIOs to native functionMaulik V Vaghela
HDMI DDC GPIOs were configured as NC till now in waddledoo. This may cause HDMI i2c transfer to break and EDID read will fail due to wrong configuration Configuring these GPIOs as NF in coreboot to fix the issue. BUG=b:160324327 BRANCH=None TEST=HDMI works on DDI2 onn Type-C port Change-Id: If02f062132d7c3b01b07ea9401e81f451df35c3c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43294 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
Tune I2C bus3 frequency and insure it meets I2C spec. BUG=b:161650117 TEST=flash coreboot to the DUT and actual measured I2C bus3 make sure it meet Spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ifa9f0bce723f55a12fd2313788c995f8326e3e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Change BOOL CONFIG_ to CONFIG() in comments & stringsMartin Roth
The Kconfig lint tool checks for cases of the code using BOOL type Kconfig options directly instead of with CONFIG() and will print out warnings about it. It gets confused by these references in comments and strings. To fix it so that it can find the real issues, just update these as we would with real issues. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/emulation/qemu-i440fx/northbridge.c: Use SMBIOS macrosElyes HAOUAS
Change-Id: I0297c8c4008d9e448793c38a3758dced9ede0d7e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/intel/tglrvp: Update MAINBOARD_PART_NUMBERAnil Kumar
- Update MAINBOARD_PART_NUMBER for TGL variants - MAINBOARD_PART_NUMBER is reported as FRID on acpi - This is required for cros_config to differentiate across TGL variants. - Mosys uses cros_config to identify TGL variants using data read from FRID Bug=none Test=build and boot coreboot on TGLRVP UP3 hardware Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I11d4ab2a5b6ade6c50988a9fec4d9866fe79d7b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-07-26mb/asus/p2b: Enable hardware monitor access via I/O on ISA busKeith Hui
Set up a 8-byte I/O range at 0x290-0x297 as PIIX4's generic device 9, which activates a chip select when this range is accessed. On the P2B family it connects to the W83781D hardware monitor, allowing access to it over the ISA bus, just like vendor firmware. Apparently this does not work on p3b-f, but no ill effects observed either. TEST=On p2b-ls lm-sensors can detect chip and get readings over ISA. Change-Id: Iaed1df7230359e94c580c305f4769c8bb4f5fce0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove unneeded space in license headerElyes HAOUAS
Change-Id: Iac0f0c3d102a9a900ac168f8be907349d9a3dd42 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede/var/drawcia: Add G2Touch touchscreen supportWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: I29a891e07bb3c1d8ebe17666c18bfcf3bc1c361d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-26Kconfig: Remove unnecessary choice namesMartin Roth
The only reason to use a named choice statement is if you plan on having the choice statement in multiple places. Since none of these are used in multiple places, we can get rid of the names. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie5f84e9dc38050234976bd193ac5fbf649e564f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/asus/p2b: Drop select SMPKyösti Mälkki
Variants that select BASE_ASUS_P2B_D will also get MAX_CPUS==2 below, so this was redundant. Change-Id: I9048a4821f19d90e1489b09e294d2551941abf10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove unused 'include <cbmem.h>'Elyes HAOUAS
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/x/acpi_tables: Do minor cleanup on includesKyösti Mälkki
Change-Id: I7a6ddf95d085490d52e00ade7bac23e8c8849427 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42865 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/emulation/qemu-aarch64: Fix up license headerAngel Pons
Change-Id: I9730680a8359407a2a03dbb7243a6547420e1f39 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43856 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26*/mb/google/volteer/**/gpio.h: Fix up license headerAngel Pons
There's a `GPL-2.0-or-later` version of this file in volteer2, so use it in place of these weirdly-licensed files. Change-Id: Icde2f6539d9c726d6967350f74e7bc015e01e7b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/intel/saddlebrook/devicetree.cb: Use PCH_IRQ* macrosAngel Pons
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change. Change-Id: I6375f97bc2a30beba5882792328f26e0675621cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43867 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
This applies what commit 79572e4f32f844f60338d1aafdba6b94f4111a5c does to the devicetree settings of the zork devices. Change-Id: Ife94818d771f137e56c51ad1598148f60fcf5345 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43820 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/amd/mandolin: add default USB2 PHY tune parameters to devicetreeFelix Held
Change-Id: I4ea2fb83522d8810fe84e0a3f42bf44f2f911461 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43819 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
BUG=b:161923068 Change-Id: I67f23c0602e345fbd806e661a4462cf07f93ef64 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
Since FSP pre-populates the UPD struct with the non-zero default values, coreboot shouldn't set them to zero in the case that they aren't configured in the board's devicetree. Since all parameters being zero is a valid case, this patch adds another devicetree option that applying the devicetree settings for the USB2 PHY tuning depends on being set. BUG=b:161923068 Change-Id: I66e5811ce64298b0644d2881420634a8ce1379d7 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25mb/intel/cedarisland: undo set trig and bufdis for NF padsMaxim Polyakov
According to the documentation [1], RX Level/Edge Configuration (trig) and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable in native mode and BIOS does not need to configure them. Therefore, there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG macros. Use PAD_CFG_NF instead and set this fields to 0. [1] Intel document #549921 [2] Intel document #336067-007US This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: Ie3ee2eadc08826d49e8517c83ab6831398e3aa93 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43455 Reviewed-by: Michael Niewöhner Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-25mb/getac/p470/acpi_tables.c: Remove wrong commentElyes HAOUAS
Change-Id: I85c20d282949b51efd7cdd6f6e79b0b84ff62e2b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-25soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKUSumeet R Pawnikar
Set power limits in devicetree for Tiger Lake Y-SKU based volteer variant boards. BUG=b:152639350 BRANCH=None TEST=Built and tested power limits on volteer variant board. Change-Id: If4f1226473b48365e5962df9fff29910c99007fc Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43607 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-13 12:37:16 +0000