summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-16Revert "rockchip: rk3399: enable sdhci clk for emmc"Shunqian Zheng
This reverts commit 462e1413 ("rockchip: rk3399: enable sdhci clk for emmc") Enabling this clock in coreboot is no longer needed as it's handled in the kernel driver now. BUG=chrome-os-partner:52873 TEST=boot from usb/sdcard and check there is /dev/mmcblk0 BRANCH=none Change-Id: I92cf51f175fe56a09ab9329b29a27c77ef4328e1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 5707d1269a253dabf825be120d1f9348ffaab6d0 Original-Change-Id: I8bca870c663d8ce8fac5daaaaf8225489f22ed13 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/367421 Original-Commit-Ready: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16152 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-15reef: Increase TSR2 threshold to 100Furquan Shaikh
This is a temporary work-around since the current threshold of 70 on TSR2 results in thermal trip and shutdown while the kernel is booting. Changing this threshold to 100 allows kernel to boot up to userspace. Following values were read: $ cat /sys/class/thermal/thermal_zone4/temp 81800 $ cat /sys/class/thermal/thermal_zone4/type TSR2 BUG=chrome-os-partner:56155 BRANCH=None TEST=Boots to OS. Change-Id: I951553ed4c93b02239a51a0d3036e4a750eea04b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16156 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-08-15mainboard/google: remove unused BOOT_MEDIA_SPI_CHIP_SELECT optionAaron Durbin
The BOOT_MEDIA_SPI_CHIP_SELECT option is not used in any of the code. Remove its usage. BUG=chrome-os-partner:56151 Change-Id: I522b62a2371b8a167ce17c48117669390cda14cd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16185 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-15mb/gigabyte/ga-b75m-d3v: Add missing board URLJonathan Neuschäfer
Change-Id: I990038c09f5805c8e670fd316808dde767e8671b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16159 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-13Revert "gru: Show the current time on start-up"Julius Werner
This reverts commit 850e45f19f498eedd80da4a97a5ce641e2cec6d5. google_chromeec_init() is a weird function that can lead to confusing behavior. I'm not sure how it's meant to work on the boards that use it, but it causes problems on Kevin and other non-x86 boards have never used it either. It doesn't really do anything anyway (the EC works fine without an initial HELLO), so at best it's just a waste of time... let's take it back out. There's also no need to display the current time on every boot... other boards don't do that and the eventlog already fills the same purpose. Cut it out to avoid one extra host command overhead. BRANCH=None BUG=chrome-os-partner:55995 TEST=Recovery reasons now get correctly propagated across the EC reboot. Change-Id: Ic3b772780d4d05e362c269969e6e4e7069482bb6 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 103d86e68cd164bea39aa1edc8668d80358edbde Original-Change-Id: I58fd5e6094e1c8cb6368e7a4569ab9231375fbc9 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/367351 Original-Reviewed-by: Simon Glass <sjg@chromium.org> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/16153 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11reef: Update chromeos.fmdFurquan Shaikh
1. Get rid of LBP2 partition 2. Shrink RO size 3. Increase RW-A and RW-B sizes 4. Increase RW_MRC_CACHE size CQ-DEPEND=CL:366793 BUG=chrome-os-partner:52127, chrome-os-partner:55699, chrome-os-partner:55778 BRANCH=None TEST=Compiles successfully. Boots to OS. Change-Id: Iad41d8cc7697e6d73f1aa2c699b0e8559349b77e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16145 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like SuperSpeed line muxing for rotated cable orientations in the SoC. While fancy, this is very complicated and we don't want to implement support for the whole thing in firmware. The USB Type-C standard has intentionally been designed in a way that the USB 2.0 (HighSpeed) lines always "just work" in any orientation (by just shorting different pins in the connector together) so that simple use cases like ours can get basic USB functionality without much hassle. However, a semi-configured Type-C PHY can confuse USB 3.0 capable devices into thinking we're actually supporting SuperSpeed, and fail at that rather than establishing a reliable HighSpeed connection. This patch sets enough bits in the Type-C PHY to electrically isolate the SuperSpeed lines from the connector so that the connected device isn't going to get any fancy ideas and reliably falls back to USB 2.0. Also clean up the rest of the USB code while we're at it: avoid writing a few bits that are already in the right state from their reset values anyway, or reading values whose content we already know for this SoC. Rename the USB controllers to the name actually used in the Rockchip documentation (USB OTGx) rather than the name blindly copied from Exynos code (USB DRDx). BRANCH=None BUG=chrome-os-partner:54621 TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all orientations, observe how it gets reliably detected now (safe for some known hardware issues on my board). Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366160 Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com> Original-Reviewed-by: Shelley Chen <shchen@chromium.org> Original-Reviewed-by: <515506667@qq.com> Reviewed-on: https://review.coreboot.org/16125 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-11lenovo/x60: add info message if dock is presentAlexander Couzens
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16136 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11lenovo/x60: add GPIOs initialisation before dock checkAntonello Dettori
Add GPIOs initialisation before dock check. Needed in order to properly detect the presence or absence of the lenovo dock. Previously the check always reported the dock as connected and currently it always reports it as disconnected since the GPIOs are not properly initialised during the check. Tested and confirmed working. Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16139 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11intel/amenia: Add MAINBOARD_FAMILY for ameniaBora Guvendik
BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: I66178cc75872f14941434081d9650a569a084d04 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16135 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11intel/amenia: set default value for BOOT_MEDIA_SPI_BUSBora Guvendik
BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: I60d411482812d98cb8dd11d66b0fc96ea9bae895 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16134 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-11intel/amenia: Select UART_FOR_CONSOLE for ameniaBora Guvendik
Set default value for UART port BUG=chrome-os-partner:51844 TEST=Boot to chrome and check console Change-Id: I5e76066e0ff531303595dcd5a99f2f8db379e89b Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16133 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-11intel/amenia: Update flash size to 16MBBora Guvendik
Update flash image size to 16MB and update image layout in flashmap descriptor file. BUG=chrome-os-partner:51844 TEST=Boot to chrome Change-Id: Ibdfb2949d06aedc38ddcef1078c2d14abcfa2dac Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/16083 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-10google/reef: Add mainboard handler function for gpio SMIShaunak Saha
This patch adds mainboard_smi_gpi_handler which handles the SMI event. This can happen in situations like lidclose and system goes to shutdown. BUG=chrome-os-partner:54977 TEST=When system is in firmware mode executing the command lidclose from ec console shuts down the system. Change-Id: I8ff6001e48dcbbd4cee5097e759352d8fea6189b Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15834 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-09google/gru: Fix rk3399-gru write protectDouglas Anderson
The write protect GPIO is active high, not active low. After fixing I can see this after removing the write-protect screw: $ crossystem | grep wpsw_boot wpsw_boot = 0 Putting the screw in shows: $ crossystem | grep wpsw_boot wpsw_boot = 1 Caution: this CL contains explicit material. It explicitly sets the pullup on the WP GPIO even though that's the boot default. BRANCH=None BUG=chrome-os-partner:55933 TEST=See desc. Change-Id: I23e17e3bbbe7dcd83e81814de46117491e61baaa Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e6969f4be42c00c6e88bbb14929cf0454462ad21 Original-Change-Id: Ie65db9cf182b0a0a05ae412f86904df6b239e0f4 Original-Signed-off-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/366131 Original-Tested-by: Brian Norris <briannorris@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16115 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-09gigbyte/ga-g41m-es2l: add cmos.layout and cmos.defaultArthur Heymans
This adds a cmos.layout and a cmos.default to ga-g41m-es2l. This allows to set things like baud_rate, debug_level, etc. from cmos. Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-09mainboard/google/rush_ryu: remove rush_ryu mainboardAaron Durbin
The rush_ryu board was a development platform that never made it into a product. Remove it as it's not available to anyone. BUG=chrome-os-partner:55932 Change-Id: Ia3836ff8cade3009730543177a66736ae197572b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16107 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09mainboard/google/rush: remove rush mainboardAaron Durbin
The rush board was a development platform that never made it into a product. Remove it as it's not available to anyone. BUG=chrome-os-partner:55932 Change-Id: I0f77bb791491509da7bd9cf25050e01c2f734a2f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16106 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09google/gru: Update board/RAM ID ADC valuesJulius Werner
Looks like our hardware guys have decided to change some voltage ranges in the Gru/Kevin ADC IDs since we last wrote a table. This patch updates it to the latest values from the Spreadsheet of Truth. Also adds further values up to rev15. BRANCH=none BUG=none TEST=none Change-Id: I1aa093ca3abe952afd658eb7da01b325f798eaa0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: e42b4685c91f01ce1cff61638b17042be9d575fd Original-Change-Id: I646fd03dc385df1a8f0af8cb85ff3128cc31f8d8 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/365111 Original-Tested-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16053 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-08-08supermicro/h8scm: Remove last unused chip.h fileMartin Roth
Change-Id: I84d61c8ade6e42e314a31e1155b4d5628b16199a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16081 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-08skylake/devicetree: Add PIRQ Routing programmingBarnali Sarkar
Program PIRQ Routing with correct values, as done by FSP, and also in 'soc/intel/skylake/romstage/pch.c' file. If not done, these values get overridden by "0" during PxRC -> PIRQ programming in ramstage, in 'soc/intel/skylake/lpc.c' file pch_pirq_init()function. BUG=none BRANCH=none TEST=Build and boot kunimitsu Change-Id: Ibeb9a64824a71c253e45d6a1c6088abd737cf046 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16044 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-08-08google/reef: Configure SDIO D1 to enable SCS Power GatingJagadish Krishnamoorthy
SDIO D1 pin needs to be configured as Native mode to enable SCS Power Gating. BUG=chrome-os-partner:54251 TEST=Verify SCS Power Gating Change-Id: Ic33b26443203217678e11d195eb965a7e628ad82 Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/16062 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-06google/reef: Enable I2C2 for use in bootblockDuncan Laurie
Enable I2C bus 2 for early init so it can be used by vboot for TPM communication for verifying the memory init code. BUG=chrome-os-partner:53336 BRANCH=none TEST=build and boot on reef Change-Id: Id4940ab01d8ccf288ab0a7a9a2f19867ed464e8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16059 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05google/reef: Correct SD card pins configChiranjeevi Rapolu
SD CLK and CLK_FB needs to be pulled down by 20K. SD CD_N is active LOW, needs to be pulled up by 20K SD WP pin is not connected for uSD cards, enable writes by default by pulling low by 20K. BUG=chrome-os-partner:54866 BRANCH=None TEST=Test with uSD cards. Change-Id: Ia4bbd966ffb21e276dfc31a74f4ea54718900d66 Signed-off-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Reviewed-on: https://review.coreboot.org/16057 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-05soc/intel/quark: Add FSP 2.0 romstage supportLee Leahy
Add the pieces necessary to successfully build and run romstage using the FSP 2.0 build. Because romstage is using postcar, add the postcar pieces so that romstage can attempt to load postcar. TEST=Build and run on Galileo Gen2 Change-Id: I66b3437e3c7840223535f6ab643599c9e4924968 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15866 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-05soc/intel/quark: Add FSP 2.0 boot block supportLee Leahy
Add the pieces necessary to successfully build and run bootblock using the FSP 2.0 build. TEST=Build and run bootblock on Galileo Gen2 Change-Id: I2377f0b0147196f100396b8cd7eaca8f92d6932f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15865 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-04chromeec: Chrome EC firmware source selection for EC and PD firmwaresPaul Kocialkowski
In some cases, we don't want the Chrome EC firmwares (both EC and PD) built directly by the coreboot build system or included in images at all. This is already supported with EC_EXTERNAL_FIRMWARE but it does implement a binary (build and include) or (neither build nor include) policy. Some cases require the ability to separately control whether the EC and PD firmwares should be built and included by the coreboot build system, only included from externally-built images or not included at all. This introduces config changes implementing that behaviour, renaming options to make it clear that they are specific to the Chrome EC. Change-Id: I44ccee715419360eb7d83863f4f134fcda14a8e4 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/16033 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-04google/reef: Add GPIO changes to assert SLP_S0/Reset signalShankar, Vaibhav
PMIC/PMU: Set the iosstates for PMIC to assert the reset signal, PMU to assert SLP_S0 signal. Change-Id: If5a6a1cb8f065a8c3a6a19d9441a21d60b39e579 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16031 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-03lenovo/x60: Fetch 16 bits when trying to parse bit 13Patrick Georgi
I'm not sure if that's the right fix here, but assuming the bit mask is right, the inb is wrong. Change-Id: I7e33019af088780a09be12513200bec63734bf97 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229556 Reviewed-on: https://review.coreboot.org/16026 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-08-03google/gale: Add more board ID variantsKan Yan
EVT1 has two board IDs. Use binary first mode of base3 encoding for board ID. BUG=chrome-os-partner:55320 TEST=None. BRANCH=None Change-Id: I1cac1f74207f42616111d39db5c0494b7d1a0fb2 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 2b16cc74c4c147315b7db345678bbaf536ab4a7b Original-Change-Id: I6e95c7be4a6d28a0aae38b0838bd2ab71d288ba1 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364623 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org> Reviewed-on: https://review.coreboot.org/16030 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
Coming Kevin revisions will switch back to an I2C TPM. This patch adds the required configuration options and code to support that. Since the TPM type can currently only be changed at compile time, we can no longer support older Kevins with the same image. In order to build for Kevin revisions < 5, you have to explicitly override the CONFIG_GRU_HAS_TPM2. BRANCH=None BUG=chrome-os-partner:55523 TEST=Compiled both Kevin and Gru, confirmed that bootblock and verstage binary had the appropriate code differences. Change-Id: I1b2abe0f331eb103eb0a84f773ee7521d31ae5d8 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3245bff937154f0f9f39894de9c98a75631d59d9 Original-Change-Id: I81a15c9fb037a7ca2d69818e46cbb4f9a5ae1989 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364222 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16029 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-08-03google/gru: Add support for Gru rev1Julius Werner
This patch adds support for the Gru rev1 board. This board differs from rev0 by no longer relying on the I2C backlight booster and requiring the same ODT SDRAM settings as newer Kevin boards. BRANCH=None BUG=chrome-os-partner:55087 TEST=None Change-Id: I1428760540a0aaaa0c02c6cb5b0981294ba4df33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 8de7bcc78c6c48c251c85185e238cea7812f7a28 Original-Change-Id: I3cb49bc644190f35300e6c618b2934956fa88e5b Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/364624 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16028 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-03mainboard/intel/galileo: Add FSP 2.0 Kconfig supportLee Leahy
Add and adjust the Kconfig flags to support both FSP 1.1 and FSP 2.0 builds for Quark. TEST=Build and run on Galileo Gen2 Change-Id: I7c5b7efd2635180edcfe4e1a98bb292030117bc8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15864 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-03mainboard/intel/galileo: Remove use of EDK-II macros & data typesLee Leahy
Add assert.h to use coreboot's ASSERT macro. Replace the use of UINT8 data type with uint8_t. TEST=Build and run on Galileo Gen2. Change-Id: I0756b0f30b3488647530e2dd1a4ab62813815f3e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15859 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02arch/riscv: Add include/arch/barrier.hJonathan Neuschäfer
mb() is used in src/arch/riscv/ and src/mainboard/emulation/*-riscv/. It is currently provided by atomic.h, but I think it fits better into barrier.h. The "fence" instruction represents a full memory fence, as opposed to variants such as "fence r, rw" which represent a partial fence. An operating system might want to use precisely the right fence, but coreboot doesn't need this level of performance at the cost of simplicity. Change-Id: I8d33ef32ad31e8fda38f6a5183210e7bd6c65815 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15830 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-02google/lars & intel/kunimitsu: Disable EC buildMartin Roth
The Chrome EC codebase no longer supports the google/lars and intel/kunimitsu boards. Disable the build in those platforms. Change-Id: Ic4f5a1a34bb19ee31632c1ad8430c30f7154f138 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15869 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-02google/reef: Add pull up 20K for LPC SERIRQKane Chen
per hw team's check and info from EDS, this pin needs to be pu 20K. Otherwise SoC may not notice interrupt request from EC over LPC because SERIRQ line is floating. BUG=chrome-os-partner:55586 BRANCH=none TEST=boot ok and Quanta factory verified the keyboard issue is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I5b0213514ce152d4e2cecdda8786925495a0f24a Reviewed-on: https://review.coreboot.org/15951 Tested-by: build bot (Jenkins) Reviewed-by: Freddy Paul <freddy.paul@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-02intel/amenia: Add GPIO changes to assert SLP_S0/Reset signalShankar, Vaibhav
PMIC/PMU: Set the iosstates for PMIC to assert the reset signal, PMU to assert SLP_S0 signal. Change-Id: Iec2dd659ea21f07d0bfe74194756786375cf775c Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com> Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/15777 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-01siemens/sitemp_g1p1: Fix typoPatrick Georgi
Change-Id: I1c9af223d3598c4822905acce0cf9b1dca6ad1b6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1287066 Reviewed-on: https://review.coreboot.org/15981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-07-31mainboard/bap/ode_e20XX: Enable UART 3/4 in devicetreeFabian Kunkel
This patch adds IO and IRQ information for UART 3/4 to the devicetree. Patch with Change-Id: Ief5d70c8b25a2fb6cd787c45a52410e20b0eaf2e is needed. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: I1d8fa16950079a47775f48166486415bd5d24f42 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15621 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard/bap/ode_e20XX: Add different DDR3 clk settingsFabian Kunkel
This patch adds two SPD files with different DDR3 clk settings. The user can choose which setting to use. Lower clk settings saves power under load. SoC Model GX-411GA supports only up to DDR3-1066 clk mode. Both SPD settings were tested with memtest for several hours. Power saving is around half a watt under heavy memory load. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: Ibb81e22e19297fdf64360bc3e213529e9d183586 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard/bap/ode_e20XX: Change PCIe linesFabian Kunkel
This patch binds PCIe lanes 2 and 3 to one PCIe device. PCIe device 2.4 becomes x2. Tested with the connected FPGA on PCIe 2.4. FPGA doubles transfer rate from/to the AMD. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: Icee567272312a7df4c3b5a6db5b420a054ec3230 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31sunw/ultra40m2: Fix handling non-existence of a devicePatrick Georgi
This probably never happens, but since we already test for the presence of the device, it makes no sense to try to configure it after its absense was determined. Change-Id: I9877dcd15819fb7949fa08a0954b05780df66316 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347362 Reviewed-on: https://review.coreboot.org/15982 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31google/reef: Update chromeos.fmd RO_SECTIONFurquan Shaikh
Update RO_SECTION to match the changes in depthcharge: https://chromium-review.googlesource.com/#/c/364261 BUG=chrome-os-partner:55713 Change-Id: I7238856cf73a62345778ea87e191a11190b7fb38 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31intel/amenia: Enable DPTF in mainboardShaunak Saha
This patch enables DPTF support for Intel Amenia platform, adds the ASL settings specific to Amenia boards. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Amenia board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I400e2312a20870058f3a386004fad748d3ee4460 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15094 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31google/reef: Enable DPTF in mainboardShaunak Saha
This patch enables DPTF support for Google Reef platform, adds the ASL settings specific to Reef boards. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Reef boards. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15640 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 01:39:31 +0000