summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2016-05-08intel/pineview: Don't try to store 34 bits in 32Stefan Reinauer
Mask out the bit that doesn't fit in 32bits, so gcc 6.1 is happy Change-Id: I13e2b41742206b8d86b90314b80cc324c00ae637 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14639 Reviewed-by: Damien Zammit <damien@zamaudio.com> Tested-by: build bot (Jenkins)
2016-05-06amd/gx2 + amd/lx: Fix shift overflow issueStefan Reinauer
gcc 6.1 complains that SMM_OFFSET << 8 is larger than the register it is assigned to (rightly so): src/northbridge/amd/gx2/northbridgeinit.c:196:23: error: result of '1077936128 << 8' requires 40 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=] msr.lo = (SMM_OFFSET << 8) & 0xfff00000; ^~ Change-Id: Ib0d669268202d222574abee335a6a65c8a255cc7 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14617 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-05rdc/r8610: Move to src/socStefan Reinauer
Change-Id: I99e5d7f3b46c90ca863ddf6c186b5447d0c8e6f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14607 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-05dmp/vortex86ex: Merge northbridge and southbridge into socStefan Reinauer
Change-Id: I16c04452d2d6c3205aea29fe8aa8fad8fc485a46 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14600 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-05-04nb/intel/sandybridge/raminit: support calling dram_freq multiple timesPatrick Rudolph
The PLL will never lock if the requested frequency is already set. As the fallback may request the same frequency again exit early to prevent a hang. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I625b2956346d8c50cca84def6190c076bf99dbec Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14174 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/sandybridge/raminit: add additional fallbacksPatrick Rudolph
Add the following fallbacks: * Try decreasing clock frequency. In case of DDR1600 the next possible value of DDR1333 is being used. * Try decreasing clock frequency. In case of DDR1333 the next possible value of DDR1066 is being used. * Disable failing channel. The system may be able to boot with a single channel enabled. The fallbacks are untested. Change-Id: I3be7034ad25312b3ebf47a54f335a3893f8d7cc1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14173 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-04nb/intel/gm45: Fix native text mode initializationNick High
The LVDS port is configured to accept data from pipe A, but the panel fitter and VGA were attached to pipe B. Changes to VGACNTRL: - select pipe A instead of pipe B. - disable VGA centering to fix jitter. TEST=Build and run on Thinkpad X200 in both text and framebuffer modes. Change-Id: I2356f264580d8b021952c217de3477291d866f98 Signed-off-by: Nick High <nhigh@openmailbox.org> Reviewed-on: https://review.coreboot.org/14524 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-05-02nb/amd/mct_ddr3: Only initialize ECC bits onceTimothy Pearson
The ECC check bits of all ECC DIMMS were inadvertently initialized twice in the same routine, significantly delaying startup. Part of this was related to an obsolete MCA workaround that has been fixed through multiple commits, therefore the workaround is no longer needed. Only initialize the ECC check bits once. Change-Id: I90ac1147d9b006794d29b866a9cb5b7ead8f01e7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14503 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-05-01nb/amd/mct_ddr3: Warn if MaxRdLatency training fails on Family 15hTimothy Pearson
Change-Id: Idb948acd1a508379f600fbd2fd40fb26b7571d7c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14545 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Stop receiver enable cycle training after window foundTimothy Pearson
During receiver enable cycle training on Family 15h the entire range of possible delays is searched, even though the single passing window is often found nearly immediately. Skip the remainder of the delay range after the passing window has been located. Change-Id: If98217fa8e7de77366762d3c7bb01049a1dc080f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14544 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Do not constantly reset read data timing registers to 0Timothy Pearson
During DQS receiver enable cycle training on Family 15h platforms the read data timing registers were inadvertently set to zero on every lane training attempt. Ensure that the read data timing registers are correctly set after each lane is trained in receiver enable cycle training. This allows more than one RDIMM to function on a given DCT channel. Change-Id: I87d732f0383e9785a73b57e6f48855f3e872f1f9 Tested-On: ASUS KGPE-D16 Tested-With: 1x Opteron 6262HE Tested-With: 4x Crucial 36KSF1G72PZ-1G6M1 (slots A2 / A1 / B2 / B1) Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14543 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Skip nibble training when current DIMM is not x4Timothy Pearson
Change-Id: I1f5b024606093dc81de3f3d69b7a43e20141b709 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14542 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-01nb/amd/mct_ddr3: Fix x4 DIMM receiver enable training on Fam15hTimothy Pearson
The existing Family 15h receiver enable training code stored temporary delay values in the wrong variables, leading to the requisite averaging of delays across nibbles not being applied. This in turn made x4 DIMMs less stable than they should have been. Store temporary nibble delay values in a dedicated array. Change-Id: Ic5da898af7d689db4110211f89b886ccdbb5f78f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-29nb/intel/sandybridge/raminit: fix regression "always use mrccache"Patrick Rudolph
Fix regression introduced by: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Don't run channel_test on S3 resume as it overrides memory that might be in use. Fixes MCE events reported by the GNU/Linux kernel that low memory has been modified. Reset on failed s3 resume. Change-Id: Ibadea286619c7906225f86a93aaa0b4caf26cabe Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-28nb/amd/mct_ddr3: Restart system on training failure instead of using die()Timothy Pearson
DIMM training can sporadically fail due to external influences or various errata. In these cases, restarting to retry training is a more appropriate response than halting the system and requiring manual intervention. Change-Id: Id49f7419f56e0640a84448cc06ecbaf62bed145e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-26nb/amd/mct_ddr3: Report correct DIMM in MRS setup routinesTimothy Pearson
The wrong DIMM number was used in the initial non-target MRS setup routines. This had no functional impact other than to print the wrong DIMM number in the DDR3 verbose debug output. Change-Id: I480118ed00e1786a06e641a56f0fb19cd87f92eb Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14501 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-26nb/amd/mct_ddr3: Fix a number of minor errors in RDIMM setupTimothy Pearson
The existing RDIMM RC control word send routines were a hodgepodge of various AGESA chunks with different ways of handling the same task. Unify the control word chip select setup, use precise timing routines on Family 15h, fix a couple of incorrect masks, and add additional debugging statements. It is believed that this patch is cosmetic and does not significantly alter existing functionality. Change-Id: Ie4ec7b6a7be7fce09e89f9eec146cc98b15b6160 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14500 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-25nb/amd/mct_ddr3: Scale lane delays for each DIMM after MEMCLK changeTimothy Pearson
When more than one DIMM is installed on a DCT, only the first DIMM delay values are scaled to the new memory clock frequency after a memory clock change during write leveling. Store the previous memory clock of each DIMM during write leveling to ensure that every DIMM has its delay values rescaled. Change-Id: I56e816d3d3256925598219d92783246f5f4ab567 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14479 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22Revert "nb/amd/mct_ddr3: Disable MCE framework during DRAM training"Timothy Pearson
After substantial testing it has been determined that it is neither required nor safe to disable the DRAM MCA during initial startup. This (mostly) reverts commit c094d9961144871c472698c41ce634e58abb6a32. The minor debugging enhancements from that commit were left in place. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Config-RAM: 1x Kingston 9965516-483.A00LF Change-Id: I58fcc296b8c45ecaedf540951c365e4ce52baaf5 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14446 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Enhance debugging around MEMCLK frequency changeTimothy Pearson
Change-Id: I5056cf885b7063a97c095bfaaf01dd8da777a425 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14447 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Fix RDIMM training on certain DIMMsTimothy Pearson
Certain RDIMMs have inherently large write levelling delays, in some cases exceeding 1.5 MEMCLK. When these DIMMs are utilized, the phase recovery system requires special handling due to the resultant offset exceeding the phase recovery reporting capabilities. Fix an old error where delays > 1.5 MEMCLK were not being programmed (gross delay high bit was not in set range), and restore special delay handling for delays greater than 1.5 MEMCLK. Also enhance debugging for x4 DIMMs around the affected code. Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I0fb5454c4d5a9f308cc735597607f095fe9188db Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14441 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-22nb/amd/mct_ddr3: Run fence training on each node after memory clock changeTimothy Pearson
The BKDG requires phy fences to be re-trained after a memory clock change. Memory training on the ASUS KGPE-D16 and KCMA-D8 somehow "mostly" worked -- without actually following this requirement -- ! Fix the single typo that caused several weeks of delay in putting servers with Kingston RAM (and others) into production... Tested-On: ASUS KGPE-D16 Config-CPU: 1x Opteron 6262HE Config-RAM: 4x Crucial 36KSF1G72PZ-1G6M1 Change-Id: I197e6728d2b0ac8c1535740599459d080b17af33 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14445 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-20AMD CIMX: Drop unused codeKyösti Mälkki
We never define B1_IMAGE or B2_IMAGE. These are about building CIMx as separate binary modules, while coreboot builds these into same romstage or ramstage module. Change-Id: I9cfa3f0bff8332aff4b661d56d0e7b340a992992 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kerry Sheh <shekairui@gmail.com>
2016-04-19kbuild: Allow drivers to fit src/drivers/[X]/[Y]/ schemeStefan Reinauer
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make them pluggable. Also, fix up the following driver subdirectories by switching to the src/drivers/[X]/[Y]/ scheme as these are hard requirements for the main change: * drivers/intel * drivers/pc80 * drivers/dec Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14047 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-16northbridge/amd/{lx,gx2}: remove immediate accesses of 0Patrick Georgi
gcc doesn't like these because they're undefined behavior, so use zeroptr instead. For the loop that just does a number of writes (0..4), use zeroptr + i. Checked the disassembly (AMD_RUMBA and PCENGINES_ALIX2D) to not contain ud2 anymore and to look reasonable where zeroptr was used. Change-Id: I4a58220ec9a10c465909ca4ecbe5366d0a8cc0df Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14345 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-04-13amd/agesa/family12/dimmSpd.c: Indent (tab) fixEdward O'Callaghan
Trivial; Use tab over space for indent. Clean up some ASCII art while here. Change-Id: Id2478d140a98596c5eeefdf5b047c1ca23203909 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: https://review.coreboot.org/8016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-04-11and/nb/mct_ddr3: Pack all structures passed to ramstage and set alignmentTimothy Pearson
Two of the MCT data structures passed as substructures to ramstage were not packed, and additionally no alignment was specified. On at least SP5100-based platforms, specifying packed with no alignment caused boot failure dependent on the exact compiled binary layout (LPC hang). Specifying the alignment and packing the remaining structures appears to have resolved the remaining LPC hang issues on the KGPE-D16. Note that packing the remaining structures alone was not sufficient to eliminate the hang, however removing the packed attribute entirely (during debugging) did resolve the hang at the expense of potential problems in ramstage. Change-Id: If3a7509ed438870d4d05caaaaa091e1c47bf9b97 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14303 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-04-11nb/amd/amdfam10: Write MCT variables to flash after PCI configurationTimothy Pearson
The SPI controller needs to be set up on devices such as the SP5100 before it can be accessed to write MCT backup data. Move the backup data write after PCI configuration has been completed. Change-Id: Ibcf31755242ac058407a422ce8aa33d6b0b293c7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14305 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-10nb/intel/sandybridge/raminit: always use mrccachePatrick Rudolph
Always use MRC cache if possible. Added a CRC16 array to make sure the DIMMs haven't been replaced. In case one of the CRC's doesn't match, start normal RAM training. Use new fallback in case of broken mrc cache. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Test result: The system boots a lot faster using the MRC cache. On swapping DIMMs the CRC16 doesn't match and normal ram training is started. Change-Id: Ib48fe8380446846df17d37b22968f7d4fd6b9b13 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14172 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-04-08Revert "nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installed"Timothy Pearson
This reverts commit f961becc433bf23fc8744fdfd757f0cdb75c2c62. On studying the BKDG more closely this is not the correct place to enable DIMM parity. Further patches to clarify the parity setup process on Family 15h are forthcoming. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebecd Reviewed-on: https://review.coreboot.org/14271 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Reenable sync flood after ECC initTimothy Pearson
The sync flood reset fix in Change-Id: I62d897010a8120aa14b4cb8d096bc4f2edc5f248 and related changes have made it possible to move the sync flood enable statements back into romstage. Change-Id: I5a3a4f1621e3048f9dfc159709410be9de6ebece Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14270 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Add MCE reporting logicTimothy Pearson
When a fatal error and subsequent sync flood / reset occurs, the MCA status registers may contain valuable information on the cause of the fatal error. Add functions to report MCEs and reset the MCA status registers early in the boot process. Change-Id: Icde1051ac22f93688de1330f5e2c9ce28b14b59a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14265 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/amdfam10: Only flag machine check exception if valid bit is setTimothy Pearson
Change-Id: I42d901ae9445943a863fb3ba9bda5a915f255e02 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14264 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-08nb/amd/mct_ddr3: Cache whether ECC is allowed at the platform levelTimothy Pearson
Certain AMD platforms, such as those using the SP5100 southbridge, contain a very poorly documented bug related to LPC ROM access, which is triggered by repeated (hundreds or more) rapid calls to get_option(). This bug manifests as a complete system deadlock in ramstage device configuration, requiring standby power to be removed from the system to release the deadlock. Cache the platform ECC status to avoid repeated calls to get_option() in the lane count detection logic. Change-Id: I8b48c523218ccc8c113319957d6eca2d15e1070f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14273 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05nb/intel/sandybridge/raminit: die in toplevel functionPatrick Rudolph
In error case die in top level function. No functionality is changed. Change-Id: Ie15b01184d40bdbce20d49dcab2f9fb607068c7a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14171 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-05nb/intel/sandybridge/raminit: prepare raminit for fallbackPatrick Rudolph
Return errors to top level ram init function. Required by the folowing series to implement a fallback. No functionality is changed. On error case the system still halts in every test. Change-Id: I6278c4a1d7b4a96be8988a60671fc3d72cd6cb3d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14170 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-01nb/amd/mct_ddr3: Fix revision mask for DR processorsTimothy Pearson
The revision mask for all DR-* series processors was incorrectly set to only include the DR-B revision mask. Include all DR-* series prcessors in the DR_ALL revision mask. Change-Id: Iceda96aa6267b24abcbf78d39f4848d2be8053b8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Found-by: Coverity, CID 1229627 (#1 of 1): Logically dead code (DEADCODE) Reviewed-on: https://review.coreboot.org/14216 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-31nb/amd_mct_ddr3: Move DRAM MCE sync flood enable to ramstageTimothy Pearson
Enabling sync flood on DRAM MCE directly after ECC clear can lead to a system hang with no way to determine the offending DRAM module. Clear MCEs after ECC setup, but do not enable sync flood until NB setup in ramstage to allow time for any MCEs to accumulate in the status registers. Before enabling sync flood on MCE, determine if any MCEs were logged during ramstage execution and display them on the serial console. Also clear the DRAM ECC sync flood bits during DRAM training and initial ramstage execution. Change-Id: Ibd93801be2eed06d89c8d306c14aef5558dd5a15 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14192 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-31nb/amd/mct_ddr3: Clear early MCEs and report DRAM MCEsTimothy Pearson
During power on from cold (S5) state, numerous MCEs are generated before DRAM training starts, e.g. during HT link training. Clear these MCEs before DRAM training start, and report any MCEs generated during DRAM training. Change-Id: I7d047571242e5bd041e4aac22c1ec1d7d26ef0e6 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14191 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-31nb/amd/mct_ddr3: Disable MCE framework during DRAM trainingTimothy Pearson
On Family 15h processors, with certain RDIMMs, MCEs are generated as a normal part of DCT startup / DRAM training. Disable sync flood on parity or UC data error until ECC has been enabled. Change-Id: Ife54751ff127ffd59baaad35d3fea14ea01ef505 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14186 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/amd/mct_ddr3: Enable DIMM parity when RDIMMs installedTimothy Pearson
This resolves a long-standing issue with RDIMM control word configuration failure, likely due to random parity failure. Change-Id: If8b8dc5b8b99f4c2fe29b3a133b064631e4693be Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14184 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30northbridge/amd/amdfam10: Add family15h model10h-1fh (Trinity)Damien Zammit
Change-Id: I96d695ed10176276116fcf3a2b77605fb3f2d5db Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13710 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-30nb/intel/sandybridge/raminit: move ram training into seperate functionPatrick Rudolph
In order to add a fallback mechanism, move the ram training code into a new function. This function will be called multiple times and must return error or success to the calling function. Change-Id: I5ee1b3a528290d8252d236b9152b81291736958a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14169 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-29nb/intel/sandybridge/raminit: move dimm_info into ramctr_timingPatrick Rudolph
It's required to store the dimm_info in ramctr_timing as only ramctr_timing is written to mrc cache. Allows to fill SMBIOS type 17 if mrc cache is used. Change-Id: I7634b05069df307d471938d9854997a018de81b3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14168 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-28nb/amd/mct_ddr3: Use standard C function calls in mct_ResetDataStruct_D()Timothy Pearson
Replace open coded memset() functions with calls to the library function. The new code also explicitly backs up and restores the data structures that are preserved across calls to mct_ResetDataStruct_D(), and no longer relies on structure member order to function correctly. Change-Id: I6dd6377deda0087cd1b65f7555588978657d6516 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-26nb/amd/amdmct: Select max_lanes based on ECC presence or absenceDamien Zammit
Change-Id: Ic5482dc13ab7b53ec4df408bbe32d20888ae2e12 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13725 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-24nb/amd/mct_ddr3: Set the NBP0 read latency from P0 trained valuesTimothy Pearson
During maximum read latency training on Family 15h processors, the maximum read latency was incorrectly set from the NBP1 value instead of the correct NBP0 value. Modify maximimum read latency training to explicitly operate on the NBP0 value, and store the previously calculated NBP1 value for reference by other portions of the training algorithm. Change-Id: I5d4a6c2def83df3e23f1a4c598314c31a0172cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14150 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-23nb/amd/mct_ddr3: Remove spurious Addl_Index variable in ↵Timothy Pearson
dqsTrainMaxRdLatency_SW_Fam15() Change-Id: Ic3f636983cf6ba2796ee56e2a25b56513a4343c1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14148 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-21nb/amd/amdmct/mct_ddr3: Ensure BlockRxDqsLock does not remain setTimothy Pearson
Under certain conditions (training abort) BlockRxDqsLock could remain set in violation of the BKDG. Ensure BlockRxDqsLock is reset to 0 after a lane training abort. Change-Id: I1a49a24d02b2b7cacae074794ec274a424a9e66b Reviewed-on: https://review.coreboot.org/14144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-16cpu/x86/mtrr: move cache_ramstage() to its only userAaron Durbin
The Intel i3100 northbridge code is the only user of cache_ramstage(). Therefore, place it next to the sole consumer. Change-Id: If15fb8d84f98dce7f4de9e089ec33035622d8f74 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14097 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 16:11:53 +0000