summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2018-05-11nb/intel/i945/bootblock.c: Correct commentElyes HAOUAS
Change-Id: Ic28ff80eb1dae6d0a307e2a1b73e8129fffbac13 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-11nb/intel/i440bx: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: I69c8b95ff1937c0b08147d9e26a3118c58129cf5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-05-09{device,drivers,lib,mb,nb}: Use only one space after 'if'Elyes HAOUAS
Change-Id: I390191fb58605d1bd6a2e5d19a9dfa7c8493e6b2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-08{mb,nb,soc}: Remove references to pci_bus_default_ops()Nico Huber
pci_bus_default_ops() is the default anyway. Change-Id: I5306d3feea3fc583171d8c865abbe0864b6d9cc6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/26055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-04amd/mct/ddr3: Correctly configure CsMux67Patrick Georgi
The existing logic to set up CsMux67 used an incorrect mask and comparison value due to a copy + paste editing error. Use the correct mask and comparison value for the last two values. Commit cf1cb5b2d4f528e7eab55ee9393cf72016bac888 did the same for CsMux45 but missed this one. Change-Id: Ib97ca89535b8291397d42eca69e217c21a9dd937 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/25994 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-01nb/intel/x4x: Change memory layout to improve MTRRArthur Heymans
This change also makes sure that the sum the uma regions (TSEG, GSM, GSM) is 4MiB aligned. This is needed to avoid cbmem_top floating between 2 usable ram region, since cbmem_top is aligned 4MiB down to easy MTRR setup for ramstage. At least tianocore requires this and fails to boot without it. Better MTRR are achieved by making the memory 'hole' till 4GiB exactly 2Gib. This code mimics how it is done in nb/intel/gm45 and achieves similar results. TSEG is enabled and set to 8M since this makes it easier to reuse the common smm setup / parallel mp code and makes it possible to cache the ramstage in there like how it's done on newer targets. TESTED on Intel DG43GT. Change-Id: I1b5ea04d9b7d5494a30aa7156d8c17170e77b8ad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-05-01nb/intel/x4x: Fix programming CxDRBArthur Heymans
Programming CxDRB should be cumulative as explained in "Intel ® 4 Series Chipset Family datasheet". This does not seem to have any real impact but better do according to the documentation and what vendor firmware does. This also removes some dead code. Change-Id: I7ff3264824c843f84b9eb6c06a06aa3f151fe4b3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22911 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-05-01nb/intel/x4x: Implement both read and write trainingArthur Heymans
This training find the optimal write DQ delay and read DQS delay settings. It does so on all lanes at the same time, like vendor (training each lane individually has poor results). The results are stored in the sysinfo struct and restored on next boots and S3 resume. This potentially increases stability as optimal settings are chosen and is more necessary for DDR3 raminit where the write DQS delays are leveled/variable due to the flyby topology. TESTED on Intel DG43GT with (2G + 1G) on each channel, see that the results are quite close to the safe original ones (that previous worked fine) and tested with memtest86+. Change-Id: Iacdc63b91b4705d1a80437314bfe55385ea5b6c1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-05-01Fix freeze during chipset lockdown on NehalemMatthias Gazzari
Remove locking of PCI device 00:00.0 registers (nehalem/finalize.c) and remove setting the zeroth bit of the MSR_LT_LOCK_MEMORY = 0x2e7 MSR register (model_2065x/finalize.c) to fix a frozen boot and S3 resume issue which became apparent with commit d533b16669a3bacb19b2824e6b4bc76a2a18c92a. More detailed, either setting the LSB of the 32 bit register at 0x98 of the PCI device 00:00.0 (in the intel_nehalem_finalize_smm function) or setting the LSB of the the MSR register MSR_LT_LOCK_MEMORY = 0x2e7 (in the intel_model_2065x_finalize_smm function) indepentenly causes a freeze during bootup or a complete session loss on resuming from S3 as described here: https://mail.coreboot.org/pipermail/coreboot/2018-April/086564.html It seems like Nehalem CPUs do not have a MSR_LT_LOCK_MEMORY register. Additionally, the "Intel Core i7-600, i5-500, i5-400 and i3-300 Mobile Processor Series, Datasheet Volume Two" indicates that registers of the PCI device 00:00.0 cannot be locked manually. Instead, they can only be locked by TXT, VT-d, CMD.LOCK.MEMCONFIG, ME_SM_LOCK or D_LCK. Finally, the addresses and sizes of these registers were partially wrong. Tested on Lenovo X201i with a Core i3 330M (no AES-NI, no VT-d and no TXT support compared to the Core i5 and Core i7 processors of a X201). Change-Id: I9d568d5c05807ebf7e131b3e5be8e5445476d61b Signed-off-by: Matthias Gazzari <mail@qtux.eu> Reviewed-on: https://review.coreboot.org/25914 Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-30nb/intel/fsp_rangeley: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: I0b969a5109276d108e6140bad338c74786b967f3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/i440: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Ibd01659f518b7a2b1aaf334fe5b16cfb936b68b7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/pineview: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Icec2e5f722c1f15493e5861b47f64698250f5813 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/sandybridge: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: I585aa48b99f4ef63905cab5d6d1502bfed0e6e42 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/nehalem: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Idcb8ff4081f2c45427aabb455a70fae1b46bcfc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/x4x: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: Ib3e708a7fa9f0a78dc704a502a2f01ee0fe209ae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/i945: Get rid of device_tElyes HAOUAS
Use of `device_t`has been abandoned in ramstage. Change-Id: I2cc938958097e416b85f6592cb8a4e645a3746ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-30nb/intel/gm45: Get rid of device_tElyes HAOUAS
Use of `device_t` has been abandoned in ramstage. Change-Id: If064a4027265e8fc2ea919d9742a554abf29b8db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-28nb/intel/x4x: Fix computing page_sizeArthur Heymans
This variable needs to be in byte so a division by 8 needs to happen. This problem was introduced by 3cf94032b "nb/x4x/raminit: Rewrite SPD decode and timing selection", but was probably not encountered because such dimms are rather uncommon. Change-Id: I2d57f5e584ac7fa1479791c239432005fe8c178d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22991 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-28nb/intel/i945/gma: Skip native VGA init for ACPI S3 resumePaul Menzel
Currently, native VGA initialization takes 90 ms during resume. But, it is not needed. So, skip it to save that time. Note, it is assumed that ACPI aware operating systems ship the appropriate drivers to initialize the graphics device. With Linux, if the module/driver *i915* is not loaded, then the display will stay black. TEST=On Lenovo X60t with Debian and Linux 4.15.11-1~bpo9+1, suspend and resume system and notice display is correctly initialized by the driver i915 after resume. Notice the messages below. ``` PCI: 00:02.0 init ... Skipping native VGA initialization when resuming from ACPI S3. PCI: 00:02.0 init finished in 56 usecs PCI: 00:02.1 init ... ``` Change-Id: I6cc9dde94c18671d077132daf648e8ba557e7887 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/25676 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-28nb/intel/i945/gma: Factor out code to new `gma_ngi()`Paul Menzel
This helps with meeting the line length limit. Also, join some lines with the one above, as the line length is now met. Change-Id: If457b3b592211aba1a3218501146b17abb5b799f Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/25876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-04-25vx900: Drop some unused definesLubomir Rintel
These are redundant -- the actual APIC Ids and addresses are in the devicetree. Change-Id: I895563dd574a8f4631866ceec91a20cbc3b158e4 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/25800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-20pci: Move inline PCI functions to pci_ops.hPatrick Rudolph
Move inline function where they belong to. Fixes compilation on non x86 platforms. Change-Id: Ia05391c43b8d501bd68df5654bcfb587f8786f71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17nb/intel/x4x/rcven.c: Change the verbosity of some messagesArthur Heymans
Displaying the whole receive enable procedure is very verbose should only be done if CONFIG_DEBUG_RAM_SETUP is selected. Change-Id: Ib568621e6d044624c1c0aeb6fb08945f561395c7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-17nb/intel/x4x: Add a convenient macro to loop over bytelanesArthur Heymans
During raminit a lot of procedures need to be done for each bytelane. Change-Id: Ib9a30ffabaf5c845e962e3e79cf4a20faa1d9857 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-17nb/intel/x4x: Clarify the raminit memory mappingArthur Heymans
This replaces magic values by macros and adds some comments to improve readability. Adds a convenient function to fetch the test address of a rank. Also fixes the temporary memory map by changing a write to MCHBAR 0x100 to 0x110, since this is what vendor does. (No difference observed thus far) TESTED on DG43GT Change-Id: I58923e4a8a756f4ae65f759e7d46e03fad39fab7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-04-17nb/intel/x4x: Refactor setting default dll settingsArthur Heymans
This patch pushes these large default delay tables to a different file to reduce cluttering up the actual raminit source. While doing so it also uses more but smaller arrays and also adds the respective default delays for DDR3 which are not yet used in this patch. This patch add a function to set the read DQS delays instead of just programming magic values. (This will prove useful for DQS read training) To prepare for adding trainings on the delay values it stores these default delays in the sysinfo struct to program those. Later when trainings are implemented those trained values will be used instead of these safe default values, via using the cached sysinfo in 'mrc' cache. TESTED on DG43GT (still works fine) Change-Id: I0e3676e06586ea84fc0729469946dbc9a8225934 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-17nb/intel/x4x: Use SPI flash to cache raminit resultsArthur Heymans
Stores information obtained from decoding dimms and receive enable results for future use. Depreciates using rtc nvram to store receive enable settings. A notable change is that receive enable results are always reused, not just on a resume from S3. This requires cbmem to be initialized a bit earlier, right after the raminit finished to be able to add the sysinfo struct to cbmem which gets cached to the SPI flash in ramstage. TESTED on Intel DG43GT with W25Q128.V. With 4 ddr2 dimms time in raminit goes from 133,857ms (using i2c block read to fetch SPD) to 21,071ms for cached results. Change-Id: I042dc5c52615d40781d9ef7ecd657ad0bf3ed08f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-04-16nb/intel/i945/gma: Log native graphics init in level INFOPaul Menzel
This information is not spew but useful to users. Change-Id: I195c6913b7f0b96680b433ff3251aebb7e0f70f3 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/25675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-16nb/intel/i945/gma: Fix aligment of equal signPaul Menzel
Change-Id: I4251071fc8d41a923b4e12de214670764097d47c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/25674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-04-16nb/intel/sandybridge: support more XMP timingsDan Elkouby
Tested with a pair of GSkill F3-1866C9-8GSR. This makes sure in particular that we honor the CMD rate requested by the XMP profile. This memory kit needs a CMD rate of 2 to be stable at DDR3-1600 and up, even though it passes training at 1. Also respect requested CWL to match vendor firmware and for a potential increase in performance. The tested kit requests a tighter value than the per-frequency table provides and has shown to be stable using that setting. Change-Id: I634bed764d76345c27f02a2fae5abb2d81b38fd9 Signed-off-by: Dan Elkouby <streetwalkermc@gmail.com> Reviewed-on: https://review.coreboot.org/25664 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13nb/intel/sandybridge/peg: Add PEG driver stubPatrick Rudolph
Required for other ACPI generators, like the one used for _ROM. * Add ACPI code for PEG10/PEG11/PEG12/PEG60 and include it on all platforms. * Add PCIe driver for PEG. The driver returns ACPI names for ssdt generators. Needs test on real hardware. Change-Id: I96835c43522580c95fd4f250c56bf9438e993bc1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/22337 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11Revert "model_206ax: Use parallel MP init"Arthur Heymans
This reverts commit 5fbe788bae15f0d24d56011e8eb8b48c107b7b05. This commit was submitted without its parent being submitted, resulting in coreboot not building. Change-Id: I87497093ccf6909b88e3a40d5f472afeb7f2c552 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-04-11model_206ax: Use parallel MP initArthur Heymans
This patch adds a few southbridge calls needed for parallel MP init. Moves the smm_relocate() function to smm/gen1/smi.h, since that is where this function is defined now. Tested on Thinkpad X220, shaves of ~30ms on a 2 core, 4 threads CPU. Change-Id: Iacd7bfedfccbc09057e1b7ca3bd03d44a888871d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23432 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10cpu/intel/sandybridge: Put stage cache into TSEGArthur Heymans
TSEG is not accessible in ring 0 after it is locked in ramstage, in contrast with cbmem which remains accessible. Assuming SMM does not touch the cache this is a good region to cache stages. The code is mostly copied from src/cpu/intel/haswell. TESTED on Thinkpad X220: on a cold boot the stage cache gets created and on S3 the cached ramstage gets properly used. Change-Id: Ifd8f939416b1712f6e5c74f544a5828745f8c2f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-09intel/nehalem post-car: Use postcar_frame for MTRR setupKyösti Mälkki
Adapt implementation from skylake to prepare for removal of HIGH_MEMORY_SAVE and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM. Change-Id: I84f6fa6f37a7348b2d4ad9f08a18bebe4b1e34e2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-04nb/intel/gm45/raminit: Use CxDRT*_MCHBAR instead of magic numbersJonathan Neuschäfer
This is hopefully more readable. TEST=Build lenovo/x200 with and without this patch (using make BUILD_TIMELESS=1), compare build/coreboot.rom, notice no differences. Change-Id: I079d5353633a3d58ce0e5e616f3fad687a064d65 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23709 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28nb/intel/gm45: Allocate a 8M TSEG regionArthur Heymans
Tested on Thinkpad X200. Change-Id: I9db7a71608aaec956a7b22649498b97d58f35265 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23418 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-08nb/intel/haswell;sb/intel/lynxpoint: Enable VT-d and X2APICMatt DeVillier
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers and reserved from the OS. GFXVTBAR/VTVC0BAR policy registers set to be consistent with proprietary vendor firmwares on hardware of same platform (2 different vendor firmwares compared, found to be identical). Change-Id: Ib8f2fed9ae08491779e76f7d1ddc1bd3eed45ac7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24983 Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-08nb/intel/haswell: Generate ACPI DMAR tableMatt DeVillier
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the GFXVTBAR is only generated if the IGD is enabled. Change-Id: Ib354337d47b27d18c3b79b5de3b4fa100b59c8fc Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-03-03nb/intel/i945/gma: Log configured VGA modePaul Menzel
This is useful information, when debugging problems related to graphics. Change-Id: Iacb0ae5f012207192379fd07e91f4687ec32cdfb Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/23807 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
Many generations of Intel hardware have identical code concerning the RCBA. Change-Id: I33ec6801b115c0d64de1d2a0dc5d439186f3580a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-02-22device/ddr2,ddr3: Rename and move a few thingsArthur Heymans
In order for ddr2.h and ddr3.h to be included in the same file it cannot have conflicting definitions, therefore rename a few things and move some things to a common header. Change-Id: I6056148872076048e055f1d20a60ac31afd7cde6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-02-20nb/x4x/raminit_ddr2: Refactor clock configuration slightlyJonathan Neuschäfer
The result is shorter and (IMHO) more readable code. Change-Id: Ic51c05d7aa791250d775bd7a640213065d4caba0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-06nb/intel/sandybridge: Always use the same MMCONF_BASE_ADDRESSArthur Heymans
'Optimizing' MMCONF_BASE_ADDRESS for the native codepath prevents the use of fallback/normal with both the native raminit and the mrc.bin. Using the same MMCONF_BASE_ADDRESS as the mrc.bin codepath means that 128MB less is available to devices using the native raminit. Most devices reserve 2048M for non memory resources below 4G, which in most cases is more than adequate. Devices with only 1024M (and that don't already use the mrc.bin) are: * lenovo/x220 * lenovo/x230 * lenovo/x131e * lenovo/x1_carbon_gen1 Those could fail to allocate PCI resources, but on at least x220 with a somewhat default configuration (USB3 expresscard, Wireless PCIe card) it still boots fine, so one should not expect many problems from this change. Change-Id: I1d0648fe36c88bd9279ac19e5c710055327599fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-06nb/intel/haswell: Use the common MRC cache driverArthur Heymans
This driver uses an fmap region for the MRC cache instead of a CBFS file which makes it easier to manage if one wants to write protect it. Change-Id: Iaa6b9f87c752088d70882fd05cb792e61a091391 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-02nb/intel/sandybridge: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: I6dfef118dc2fecf2a8f2f3401c779a3becfb71a9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/23522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-01-31nb/intel/*.h: Remove left-over register definitionsPatrick Rudolph
The code has been moved into drivers folder. Change-Id: I122affffd5108052ed7a95b34d0d66a6d3279d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/23487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-26nb/intel/sandybridge: Use common mrc cache functionsArthur Heymans
This uses the functions in include/mrc_cache.h instead of northbidge/intel/common/mrc_cache.h Tested working on Lenovo Thinkpad x220, mrc_cache region gets written and S3 resume still works fine. Change-Id: I46002c0b19a55d855286eb8b0ca934ef7ca7fe09 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-24AGESA f15 cimx/sb700: Remove unused chips codeKyösti Mälkki
Change-Id: Id4e05941122c8756f15d5d24482e4cdc04215c55 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/23275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 07:34:19 +0000