summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Revert "northbridge/intel/peg: Disable unused ports"Nico Huber
This reverts commit 0e06f5bd70b45fd330d8dfb1dc77cce043caf841. It breaks gm45 and also does some magic without being asked too. It disables bridge devices permanently if no device was found on the se- condary bus. In a simple notebook world this might be ok, but it breaks hot-plugging and late detection (if a secondary bus device comes up too slow for the firmware to detect and the OS has to enumerate it). Change-Id: Ia2010640d7c55b0bdd44164b81c75dd4be50410b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/13609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04northbridge/intel/peg: Disable unused portsPatrick Rudolph
Walk the bus and try to find enabled devices. Disable the PEG port if no devices are attached. Change-Id: I67fcc831fd78ecc6dba83f4e0662ec7549cc2591 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12894 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04nb/intel/sandybridge/raminit: Fix two dimms per channelPatrick Rudolph
Issue observed: The system boots with 4G in channel 0 and 4G in channel 1. The system doesn't boot with any combination of 4G + 1G in channel 0 and 4G in channel 1. In both cases DIMM1 failed, while DIMM0 showed no issues. Problem description: The CLK to CMD/CTL was off by a half clock cycle. The find the issue I X-Y plotted timC vs timB for every lane on the failing rank. You can see an offset by 32 units for timB, that is not present on other ranks. It turns out that the XOVER CMD/XOVER CTL enable bit for DIMM1 was missing in program_timings(), which caused the clock offset. Problem solution: Add two functions to calculate XOVER CMD and XOVER CTL and use both to set XOVER in program_timings() and dram_xover(). Final testing result: The system boots with 4G + 1G in channel 0 and 4G in channel 1. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I88694c86054ade77e9d8bb2f1fdaf7bc559c1218 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13415 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-02src: Fix various spelling and whitespace issues.Martin Roth
This fixes some spelling and whitespace issues that I came across while working on various things in the tree. There are no functional changes. Change-Id: I33bc77282f2f94a1fc5f1bc713e44f72db20c1ab Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13016 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-01nb/amd/amdmct/mct_ddr3: Save and restore SkewMemClk for S3 resumeTimothy Pearson
Change-Id: Ib331bd330530d4d6be5eb7351d9f9b15c135dd63 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13167 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-01drivers/pc80: Add PS/2 mouse presence detectTimothy Pearson
On certain Winbond SuperIO devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. Add auxiliary channel PS/2 device presence detect, and update the Winbond W83667HG-A driver to flag the auxiliary channel as disabled if no device was detected. Change-Id: I76274493dacc9016ac6d0dff8548d1dc931c6266 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13165 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29Revert "northbridge/intel/sandybridge: Fix random raminit failures"Vladimir Serbinenko
It break x230 access to channel 1. This reverts commit 9f1fbb9a3002e8d74d53d7973bd1c7e3d4879238. Change-Id: I8a3b13d17729f25cea3460ac2f87bca3c193d388 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-01-29nb/amdmct/mct_ddr3: Enable mainboard voltage setTimothy Pearson
The existing code used an incorrect macro name to check for mainboard DRAM voltage set support, and as a result no voltages were actually set. Furthermore, the existing code did not contain a centralized voltage assumption for boards that did not have a DIMM voltage set implementation. Use the correct macro name to test for boards with voltage set implementation, and provide a basic fallback to 1.5V operation for boards without a voltage set implementation. Change-Id: I638c65fe013a8e600694d8cbedf6a10b33b0ef95 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13150 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29cpu/amd/fam10h-fam15h: Correctly create APIC ID on single node systemsTimothy Pearson
The existing code generated an incorrect boot APIC ID from node and core number for single node packages, leading to a boot failure when the second node was installed. Properly generate the boot APIC ID from node and core number. Change-Id: I7a00e216a6841c527b0a016fa07befb42162414a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13149 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Cleanup gma.cDamien Zammit
Tidy up the code and move vga_textmode_init() later Change-Id: I49967e7197416c955ae6c8775eac7d1a60c92d1c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13128 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Tidy up raminit and fix msbpos() functionDamien Zammit
- Fix bug with msbpos, it was not returning the correct result due to typo in logic, and unsigned value needed to be negative. - Add reclaim above 4GiB - Fix to ME related registers near the end of raminit Change-Id: I04acd0593a457437ee4a42e14b287b2b17a160af Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13127 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29nb/intel/x4x: Tidy up northbridgeDamien Zammit
- Add device enable macros - Set the PMBASE correctly through southbridge device Change-Id: I1b8cc3de96b1ecaf01e31bad8fba1fada8671c2d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13126 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-29nb/intel/x4x: Fix memory hole with both channels populatedDamien Zammit
Previously, 0xa0000000 to 0xc0000000 needed to be reserved as a non-usable memory hole because it would hang on memory i/o. Memtest86+ now passes with no errors on both channels populated. Tested on GA-G41M-ES2L with 2x2GiB sticks of ram. Change-Id: Ib52a63a80f5f69c16841f10ddb896ab3c7d30462 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13125 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-01-28via/cx700: Use zeroptr over 0Patrick Georgi
This eliminates all "ud2" instances from romstage disassembly. Change-Id: I3b0c8322a4ca4a851b0cce8f3941425d9cb30383 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: https://review.coreboot.org/13488 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-28nb/intel/pineview: Native VGA init (CRT)Damien Zammit
VGA grub console works but display wobbles left/right drm/i915 driver reports one error: - [drm:i915_irq_handler] *ERROR* pipe A underrun - Monitor does not display 1920x1080 after modeset - Other resolutions look out of sync Cause: suspect single bug in raminit (chipset init) Change-Id: I2dcf59f8f30efe98f17a937bf98f5ab7221fc3ac Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/12921 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-26nb/intel/pineview: Increase MMCONF decoding to 256 bussesDamien Zammit
Linux kernel detects 256 busses but previously only 64 were allocated. Removes warning in OS. Change-Id: Id83c85e60025a04acbe6a53dfea6878222d8791f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13033 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-24nb/amd/mct_ddr3: Properly set MR0 WR valueTimothy Pearson
The existing code accidentally truncated the MSB from the MR0 WR value. While this probably had a minimal effect in reality, it should be configured correctly for maximal system stability. Change-Id: Ifb8a39c6ca47b32b44d33735e5c6c39f1dc5a44e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13147 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-01-24nb/amd/mct_ddr3: Add additional verbose-level debug statementsTimothy Pearson
Change-Id: Ie91c990d9c2bcab8292a75d87523a46d5694a34a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13146 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24nb/amd/mct_ddr3: Update drive strength configurationTimothy Pearson
The existing drive strength calibration code did not strictly follow the BKDG-defined setup process. Bring the calibration code in line with the BKDG recommendations. Change-Id: I122eeb93958d88de59d0c3b2979f607afa2c52c3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13145 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct/mct_ddr3: Enable fast refresh on ETR devicesTimothy Pearson
When an Extended Temperature Range DIMM is installed on a channel the refresh rate should be increased per the BKDG recommendations to allow correct operation at higher temperature ranges. Set fast refresh on a channel if an ETR DIMM is installed on that channel. Change-Id: I7a085d34efc78f3f0794a5cb33b88f27a5e6d54e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13144 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdmct: Add termination and timing values for C32 socketsTimothy Pearson
The existing MCT initialization code was largely missing C32 socket- specific configuration data. Add C32 socket-specific timing and ODT values as specified in the BKDG. Change-Id: I8eef8d5c8581f03d269663a338d5542744c5cdd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13141 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-24northbridge/amd/amdfam10: Update DRAM speed limits for C32 socketsTimothy Pearson
The existing code applied G34-specific speed limits to all socket types. Update G34 and C32 specific speed limits to be in line with BKDG recommendations. Change-Id: I958ad333c47948ae741a56de5866af3e636fd24d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13140 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-01-20nb/intel/pineview: Use macro names for memory base registersDamien Zammit
Change-Id: I0b79ddcf9248c6a6964dd60e30a6ea18e27bc186 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13032 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-18nb/intel/pineview: Fix decode_pciebar()Damien Zammit
Fixes bug that decode_pciebar() function was bypassed due to PCI_DEV(0,0,0) being detected as zero and function returning 0. Change-Id: Ia79bcebbe3ba36f479cbb24dbbb163a031d9c099 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13031 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-17intel/sandybridge/raminit: fix ODT settingPatrick Rudolph
Count DIMMs on current memory channel instead of all memory channels. The current code is only able to correctly handle the following memory configurations: One DIMM installed in either channel. Four DIMMs installed, two in each channel. Two DIMMs installed, both in the same channel. For systems that have any other configuration the DRAM On-Die-Termination setting is wrong. For example: Two DIMMs installed, one in each channel. Test system: * Gigabyte GA-B75M-D3H (Intel Pentium CPU G2130) Change-Id: I0e8e1a47a2c33a326926c6aac1ec4d8ffaf57bb6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12892 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
2016-01-14nb/intel/gm45: Backport configuration of panel power timingsNico Huber
Register settings are the same as on newer chips (compare sandy- bridge), just at different locations. Change-Id: Iea0359165074298a376e0e2ca8f37f71b83ac335 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12885 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-14nb/intel/gm45: Drop unnecessary panel power handlingNico Huber
Skip everything but the final setting of PP_CONTROL, i.e. triggering the power up. The settings with PANEL_UNLOCK_REGS are useless as no lockable registers were touched in between. Also the loop waiting for the panel power up to finish was a no-op as the registers with the power timings were never filled (see follow-up commits). Change-Id: Ife27dcafdf197b2246c4e69f2bf7a3a6765d1d82 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12884 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13tree: drop last paragraph of GPL copyright header from new filesMartin Roth
This continues what was done in commit a73b93157f2 (tree: drop last paragraph of GPL copyright header) Change-Id: Ifb8d2d13f7787657445817bdde8dc15df375e173 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12914 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13intel/northbridge/sandy: raminit code cleanupPatrick Rudolph
Remove redundant call to dram_mrscommands(). Change-Id: I157915b4432093c556b538433e3337db1e9c525f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12891 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-13northbridge/intel/x4x: clean up includesMartin Roth
- Don't redefine D0F0_PCIEXBAR_LO, use the #define in x4x.h - Move TPMBASE and TPM32() definitions into iomap.h - Use "" style include for x4x.h in nortbridge files. - Move includes of .h files out of x4x.h and into the c files that need them. - Protect function definitions in bootblock. Change-Id: I3fdb579235c5446733a0ffba05fffe1a73381251 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12849 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-12nb/intel/gm45: Convert gma.c to `if (IS_ENABLED(` styleNico Huber
Change-Id: Ifae3822b6c28832f6aa05a4ffd8f02067a923f2c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/12883 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-07Correct some common spelling mistakesMartin Roth
- occured -> occurred - accomodate -> accommodate - existant -> existent - asssertion -> assertion - manangement -> management - cotroller -> controller Change-Id: Ibd6663752466d691fabbdc216ea05f2b58ac12d1 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12850 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-04Revert "AMD OemS3Save: refactor for Merlin Falcon"Kyösti Mälkki
This reverts commit d3deecdd9c5c0a8031f2ea9d6c90e0997f123d93. Do not mix open-source AGESA and binary PI trees. Once you have working S3 support for binaryPI platforms, add the adapted oem_s3.c file as northbridge/amd/pi/oem_s3.c instead. Change-Id: I7c981d0023a5c0225e046f9c0104acfa07436b79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/12282 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-31nb/intel/gm45: Export low-power and (SFF) optionsNico Huber
Make the low-power and small form factor (SFF) options overridable from romstage main. Also disable both options by default. That's ok as there aren't yet any in-tree users of the GS45 chipset. As a nice side-effect, this adds X200s support to the lenovo/x200 port. Change-Id: I94373851262e6d424cf4885ceca7260c31bc9f61 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/12814 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-30northbridge/intel/x4x: Native raminitDamien Zammit
Passes memtest86+ with either one or two sticks of 2GB ram but memory map needs a hole at 0xa0000000 to 0xc0000000 Change-Id: Ib34d862cb48b49c054a505fffcba1c17aeb39436 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11307 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-30x86 chipsets: Link non-code flow CHIPSET_BOOTBLOCK_INCLUDE filesAlexandru Gagniuc
Non-code flow assembly stubs do not have to be included in bootblock.S, now that we have more freedom in bootblock linking. Rather than bringing these stubs to the config system, just link them in the bootblock. Note that we cannot fully remove CHIPSET_BOOTBLOCK_INCLUDE at this point, as some intel SOCs use this stub for code flow. objdump -h build/cbfs/fallback/bootblock.debug on a few random boards confirms that the appropriate sections are still included in the final binary. Change-Id: Id3f9ece14e399c1cc83090f407780c4a05a076f0 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: https://review.coreboot.org/11856 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-29northbridge/intel/x4x: Intel 4-series northbridge supportDamien Zammit
Boots to console on Gigabyte GA-G41M-ES2L Ram initialization *not* included in this patch VGA native init works on analog connector Change-Id: I5262f73fd03d5e5c12e9f11d027bdfbbf0ddde82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11305 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-18southbridge/amd/sr5650: Add MCFG ACPI table supportTimothy Pearson
As the southbridge largely controls the PCI[e] configuration space this patch moves the resource allocation from the northbridge to the southbridge when the extended configuration space region is enabled. Change-Id: I0c4ba74ddcc727cd92b848d5d3240e6f9f392101 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12050 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-12-16northbridge/intel ACPI: Remove unused Local methodMartin Roth
The remainder of the divide operation was being placed into a Local, but was never being used, causing an IASL warning. Since this field is optional, just remove the Local. Fixes IASL warning: dsdt.aml 640:Divide (Multiply (CTDN, 125), 100, Local0, PL2V) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: I0b43ef638b1bc3e1163c45f31f8da57aa0d39e22 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12706 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2015-12-15x86 acpi: remove ALIGN_CURRENT macroAaron Durbin
The ALIGN_CURRENT macro relied on a local variable name as well as being defined in numerous compilation units. Replace those instances with an acpi_align_current() inline function. Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12707 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-13amd/[nb/fam10|sb/sr5650]: Minor cosmetic changesTimothy Pearson
Change-Id: Ia9cb4fe4f46327e38648f89da0ffce647fb118d3 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/12712 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-08northbridge/amd/agesa/agesawrapper.c: Fix Kconfig symbolsMartin Roth
The Kconfig symbols were missing an underscore, so were not getting evaluated properly. Change-Id: I619cf3f44f44f9c9699482d64164d3db28cd4c8f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12559 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-12-06Remove #ifdef checks on Kconfig symbolsMartin Roth
In coreboot, bool, hex, and int type symbols are ALWAYS defined. Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12560 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 11:45:57 +0000