summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2018-10-11src: Move common IA-32 MSRs to <cpu/x86/msr.h>Elyes HAOUAS
Use "cpu/x86/msr.h" for common IA-32 MSRs and correct IA-32 MSRs names. Change-Id: Ida7f2d608c55796abf9452f190a58802e498302d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28752 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-11src: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I849dd406f5ccc733d4957eaf1c774745782f531a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-10-11selfboot: remove bounce buffersRonald G. Minnich
Bounce buffers used to be used in those cases where the payload might overlap coreboot. Bounce buffers are a problem for rampayloads as they need malloc. They are also an artifact of our x86 past before we had relocatable ramstage; only x86, out of the 5 architectures we support, needs them; currently they only seem to matter on the following chipsets: src/northbridge/amd/amdfam10/Kconfig src/northbridge/amd/lx/Kconfig src/northbridge/via/vx900/Kconfig src/soc/intel/fsp_baytrail/Kconfig src/soc/intel/fsp_broadwell_de/Kconfig The first three are obsolete or at least could be changed to avoid the need to have bounce buffers. The last two should change to no longer need them. In any event they can be fixed or pegged to a release which supports them. For these five chipsets we change CONFIG_RAMBASE from 0x100000 (the value needed in 1999 for the 32-bit Linux kernel, the original ramstage) to 0xe00000 (14 Mib) which will put the non-relocatable x86 ramstage out of the way of any reasonable payload until we can get rid of it for good. 14 MiB was chosen after some discussion, but it does fit well: o Fits in the 16 MiB cacheable range coreboot sets up by default o Most small payloads are well under 14 MiB (even kernels!) o Most large payloads get loaded at 16 MiB (especially kernels!) With this change in place coreboot correctly still loads a bzImage payload. Werner reports that the 0xe00000 setting works on his broadwell systems. Change-Id: I602feb32f35e8af1d0dc4ea9f25464872c9b824c Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/28647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08Move compiler.h to commonlibNico Huber
Its spreading copies got out of sync. And as it is not a standard header but used in commonlib code, it belongs into commonlib. While we are at it, always include it via GCC's `-include` switch. Some Windows and BSD quirk handling went into the util copies. We always guard from redefinitions now to prevent further issues. Change-Id: I850414e6db1d799dce71ff2dc044e6a000ad2552 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/28927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-08nb/intel/{gm45,i945,pineview}: Use macro instead of GGC addressElyes HAOUAS
Change-Id: I233e835180fd445961b6deb74ea7afc2821c236e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
As per internal discussion, there's no "ChromiumOS Authors" that's meaningful outside the Chromium OS project, so change everything to the contemporary "Google LLC." While at it, also ensure consistency in the LLC variants (exactly one trailing period). "Google Inc" does not need to be touched, so leave them alone. Change-Id: Ia0780e31cdab879d2aaef62a2f0403e3db0a4ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2018-09-25northbridge: Use 'unsigned int' to bare use of 'unsigned'Elyes HAOUAS
Change-Id: Ib70eb33fac654a773ea39a5fd4206435dffdabb7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-21nb/via/vx900: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I70dcefd5bc9864931f66bece1f044f806f5d7ae0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-20nb/amd/pi/00730F01: use MMIO and performance counters from AGESAPiotr Król
This patch contain minimal set of changes to initial IVRS implementation to make it work reliably. Code in this patch was tested with Xen 4.8 and Debian 4.14.y - this software stack survived 100x reboots without any hang on PC Engines apu2c4. Previously using IVRS provided by AGESA lead to 29/100 hangs. MMIO base shall not be hard coded since this value depends on platform design. Performance counters were selected experimentally, since lack of them cause 4.14.y panic: [ 1.064229] AMD-Vi: IOMMU performance counters supported [ 1.069579] BUG: unable to handle kernel paging request at ffffaffc4065c000 [ 1.073554] IP: iommu_go_to_state+0xf8a/0x1260 [ 1.073554] PGD 12a11f067 P4D 12a11f067 PUD 12a120067 PMD 129b69067 PTE 0 [ 1.073554] Oops: 0000 [#1] SMP NOPTI [ 1.073554] Modules linked in: [ 1.073554] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.50 #13 [ 1.073554] Hardware name: PC Engines apu2/apu2, BIOS 4.8-1174-gf12b3046f0-d2 [ 1.073554] task: ffff8d5d69b9f040 task.stack: ffffaffc40648000 [ 1.073554] RIP: 0010:iommu_go_to_state+0xf8a/0x1260 [ 1.073554] RSP: 0018:ffffaffc4064be28 EFLAGS: 00010282 [ 1.073554] RAX: ffffaffc40658000 RBX: ffff8d5d69bae000 RCX: ffffffff99e57b88 [ 1.073554] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000246 [ 1.073554] RBP: 0000000000000040 R08: 0000000000000001 R09: 0000000000000170 [ 1.073554] R10: 0000000000000000 R11: ffffffff9a435e2d R12: 0000000000000000 [ 1.073554] R13: ffffffff9a29a830 R14: 0000000000000000 R15: 0000000000000000 [ 1.073554] FS: 0000000000000000(0000) GS:ffff8d5d6ec80000(0000) knlGS:00000 [ 1.073554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.073554] CR2: ffffaffc4065c000 CR3: 000000010fa0a000 CR4: 00000000000406e0 [ 1.073554] Call Trace: [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] amd_iommu_init+0x11/0x89 [ 1.073554] pci_iommu_init+0x16/0x3f [ 1.073554] ? e820__memblock_setup+0x60/0x60 [ 1.073554] do_one_initcall+0x51/0x190 [ 1.073554] ? set_debug_rodata+0x11/0x11 [ 1.073554] kernel_init_freeable+0x16b/0x1ec [ 1.073554] ? rest_init+0xb0/0xb0 [ 1.073554] kernel_init+0xa/0xf7 [ 1.073554] ret_from_fork+0x22/0x40 [ 1.073554] Code: d2 31 f6 48 89 df e8 d8 15 02 ff 85 c0 75 d1 48 8b 44 24 2 [ 1.073554] RIP: iommu_go_to_state+0xf8a/0x1260 RSP: ffffaffc4064be28 [ 1.073554] CR2: ffffaffc4065c000 [ 1.073554] ---[ end trace 44588f98aa7c7c0b ]--- [ 1.255973] Kernel panic - not syncing: Attempted to kill init! exitcode=0x09 [ 1.255973] [ 1.259934] ---[ end Kernel panic - not syncing: Attempted to kill init! exi9 Possible future improvements: - compare device entries with values returned by AGESA - enable EFRSup (this is enabled in AGESA) - try various IVHD flags (there is difference between initial implementation and AGESA) Change-Id: I7e3a3d21f295ae96962d7718b9568fc4b67eb23d Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/27602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-09-18nb/amd/pi/00730F01: Don't use device_t in ramstageElyes HAOUAS
Use of device_t has been abandoned in ramstage Change-Id: Ifc32b0f6964a8c3e3a100c787ac2a889b39322a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-09-16nb/intel/x4x: Don't use cached settings if CPU FSB has been changedArthur Heymans
Using the cached CPU FSB setting can simply be wrong, in which case it won't boot. Since the selected timings also depend on the CPU FSB, it is also best to not use cached timings at all when a change is detected. Tested on P5QC, swapped a 1333MHz FSB to a 800MHz FSB and it uses !fast_boot boot path. Change-Id: I12d91d0e892c15778409d7c00b27652ee52ca80c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-09-15nb/amd/pi/00730F01: Add initial native IVRS supportTimothy Pearson
- Iteration over devices in add_ivrs_device_entries were simplified to decrease complexity. - Code was structured to satisfy checkpatch Change-Id: I1ae789f75363435accd14a1b556e1570f43f94c4 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/15164 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-15nb/amd/pi/00730F01: Initialize IOMMU deviceKyösti Mälkki
Change-Id: I12d3ed35770ee06626f884db23004652084c88c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15186 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-14nb/intel/sandybridge: Don't add SMBIOS Table 17 entries on resumeNico Huber
Change-Id: Icac6e696efa1721933a1963b45d608d9ae735149 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/28589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nathaniel Roach <nroach44@gmail.com> Reviewed-by: Evgeny Zinoviev <me@ch1p.com>
2018-09-14complier.h: add __always_inline and use it in code baseAaron Durbin
Add a __always_inline macro that wraps __attribute__((always_inline)) and replace current users with the macro, excluding files under src/vendorcode. Change-Id: Ic57e474c1d2ca7cc0405ac677869f78a28d3e529 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@google.com>
2018-09-10complier.h: add __noreturn and use it in code baseAaron Durbin
Add a __noreturn macro that wraps __attribute__((noreturn)) and replace current users with the macro. Change-Id: Iddd0728cf79678c3d1c1f7e7946c27375a644a7d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/28505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-05nb/intel/x4x/gma.c: fix skipping of native graphics initStefan Tauner
CB:27984 (e6c8f7e) is supposed to skip over NGI if bit #1 in register GCC is set. However the check for x4x was wrongly checking if any bit of the whole register is set. Change-Id: I5000f5e771abb98f046e2ad19c1bee7dbc0743fc Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-22nb/intel/*/gma.c: Skip NGI when VGA decode is not enabledArthur Heymans
Writes to VGA MEM and IO by NGI are invalid if the IGD is not decoding them. Change-Id: I4b9329d14105eb563a0d4aea6ef75ff11febf6df Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21nb/intel/sandybridge/raminit: Move fill_smbios17 to ddr3.cPatrick Rudolph
There's nothing Sandy Bridge specific in this code. Make it available on all platforms to reduce code duplication. Tested on Lenovo T430: SMBIOS entry 17 is still valid. Change-Id: I051c3e07a999d8dad082c24f65b43dce180349fd Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21nb/intel/pineview: Use a common MMCONF_BASE_ADDRESSArthur Heymans
This should not be board specific. Change-Id: Ifa617e84af767f33a94f1ddfa7d4883c1a45198f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-08-21nb/intel/pineview: Use the correct address for the RCVEN strobeArthur Heymans
When doing the receive enable training, the final mapping of the ranks is already done, so we can be sure that that address 0x00000000 there will always be a rank. Change-Id: I7ac017a8816fc9a47cef0695826a1c32f699f6f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-21nb/intel/pineview: Use i2c block read to fetch SPDArthur Heymans
With this the time spend during the raminit decreases from ~480ms to ~126ms. Change-Id: Ic23f39f1017010c89795e626f6a6f918f8bda17a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/28229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-20nb/intel/raminit: Remove unused headersPatrick Rudolph
Change-Id: Ic6e7341b53bcabc415089ccfab121d3694ccb071 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-08-20nb/intel/sandybridge/raminit: Fix DIMM type mappingPatrick Rudolph
The DIMM type read from SPD needs to be converted to make sure SMBIOS fills in the correct formfactor. Tested on Lenovo T430: The Form Factor no longer reads as unknown. Change-Id: Ia0211fa133f4ba9d60dfbd5f0dd45a43df68c030 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-20nb/intel/sandybridge: Fill in DIMM serial numberPatrick Rudolph
Fill in SMBIOS type 17 DIMM serial number, read from SPD. Fixes FWTS SMBIOS type 17 test. Change-Id: Id6e818bfdf4af0fd34af56dc23df052a3f8c348d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/28191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-17sandybridge/raminit_common.c: fix printram statementIru Cai
Change-Id: Iddea8cc71dc1fb33d46b22dd19e39bf1c1257555 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/28117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-17Fix PCI ACPI _OSC methodsMarc Jones
Fix the IASL build warnings: Object is not referenced (Name [CDW2] is within a method [_OSC]) Object is not referenced (Name [CDW3] is within a method [_OSC]) Remove the not referenced objects. They are not needed. BUG=b:112476331 TEST=IASL doesn't give the warning. Change-Id: I5b38d4de3f9875c5b013a49eb5146bf5916b96a6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/28121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-13nb/intel/haswell: Always locate mrc.bin in the COREBOOT fmap regionArthur Heymans
This binary needs to be at a specific offset and will therefore always be located in the COREBOOT fmap region. This is needed when VBOOT_SEPARATE_VERSTAGE is selected. Change-Id: Ia73d468ab23932f92331ef40b8e8066cef55af2c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-10src: Fix typoElyes HAOUAS
Change-Id: I689c5663ef59861f79b68220abd146144f7618de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-09src/northbridge: Fix typoElyes HAOUAS
Change-Id: I00094028036f33892362b935899e1bceef1da625 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-08cpu/amd: Correct number of MCA banks clearedMarshall Dawson
Use the value discovered in the MCG_CAP[Count] for the number of MCA status registers to clear. The generations should have the following number of banks: * Family 10h: 6 banks * Family 12h: 6 * Family 14h: 6 * Family 15h: 7 * Family 16h: 6 Change-Id: I0fc6d127a200b10fd484e051d84353cc61b27a41 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/27923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-04x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: I3233ba1747dcf5ad05b2ad771a86e3936f655d1c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: remove read_mchbar functionsFelix Held
Change-Id: I7935cc166aa39f4053f45eef925d92ce50fd98ba Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and remove write_mchbar functionsFelix Held
This part of the cleanup patches changes the hash of the output binary; likely due to the compiler optimizing things differently. Change-Id: I1a22f6216a75e2b463d4e169e97ad6e0bbaafae8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04northbridge/nehalem: add MCHBAR8/16 AND_OR macrosFelix Held
Change-Id: I62e4a8610689e72944e1a9c020f13a47d402c136 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-08-04nehalem/raminit: clean up code and use MCHBAR macrosFelix Held
On a a timeless build with coreboot i386 crossgcc 6.3.0, this doesn't change the hash of the output binary. Change-Id: I15e09320e72cffb8a2617eca0cfe40780f74bece Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-04nehalem/raminit: remove REAL define and most dead codeFelix Held
The code only compiled when REAL was set to 1; the other case included an unpublished include. Change-Id: I7f31e9cd02f45492d6c9e88ec6164a537ca5e3c2 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27706 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-03sandybridge/raminit_mrc: remove reference to report_platform_info()Matt DeVillier
Commit ef8c559e537ed10d8054ca6a72ca50e0531fde95 [nb/intel/sandybridge/report_platform: Move remaining code to sb folder] moved reporting code to the southbridge, but missed a reference in the non-default MRC raminit path (so testing missed it). Remove invalid reference to fix compilation error. Test: build google/link with MRC raminit option selected Change-Id: I270a95ac53fbc9f8792f375908cf91585261f6a1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-01sandybridge/raminit_common: use MCHBAR AND/OR macros in remaining placesFelix Held
Change-Id: I1c81eb7c8ed0b819bb76196208cc1269180aca55 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-01sandybridge/raminit_common: use macro for execute command queue registerFelix Held
This patch doesn't change the hash of a timeless build. Change-Id: I5d329f65be0eee741fd330c0926881ff4f956624 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-01sandybridge/raminit_common: use FOR_ALL_CHANNELS macroFelix Held
Change-Id: I01bd69605760e8a03787dcfa3da9f47576e3144a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-08-01sandybridge/raminit_common: use MCHBAR AND/OR/AND_OR macros [2/2]Felix Held
This patch contains the parts that changed the hash of the generated binary; probably due to the compiler optimizing things slightly different. Change-Id: Ide0b3296864e24edb646956e47221bfef8182e3d Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27725 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01sandybridge/raminit_common: use MCHBAR AND/OR/AND_OR macros [1/2]Felix Held
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the resulting binary doesn't change with applying this commit. Change-Id: I2b1dc8befa3381f3edac06704e31e7ef50f86fa4 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27724 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01northbridge/sandybridge: add MCHBAR32 AND/OR/AND_OR access macrosFelix Held
Change-Id: I5d91674ebd281a595e7c0462671f4715ca09cb5c Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27723 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01nb/intel/gm45: Don't use PCI operations on the pci_domain deviceArthur Heymans
pci ops happen to work on this struct device since the device_path is an union. This patch still keeps adding the fixed resources in the pci_domain ops since moving it to the PCI ops which could properly use the function argument for PCI operations would require all PCI IDs to be added or else breakages are to be expected. Change-Id: I598b056d5fb1ce23b390b2f0ab4e9fb242d3685a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27242 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01nb/intel/pineview: Don't use PCI operations on the pci_domain deviceArthur Heymans
pci ops happen to work on this struct device since the device_path is an union. This patch still keeps adding the fixed resources in the pci_domain ops since moving it to the PCI ops which could properly use the function argument for PCI operations would require all PCI IDs to be added or else breakages are to be expected. Change-Id: Iea5a09c62cca102b2c211e9256295c24cf3e9fa0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27243 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01nb/intel/x4x: Don't use PCI operations on the pci_domain deviceArthur Heymans
pci ops happen to work on this struct device since the device_path is an union. This patch still keeps adding the fixed resources in the pci_domain ops since moving it to the PCI ops which could properly use the function argument for PCI operations would require all PCI IDs to be added or else breakages are to be expected. Change-Id: Iabfd15884ec8feb846d01b6af3c4afe5c1494feb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27245 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-01nb/intel/sandybridge: Don't use PCI operations on the pci_domain deviceArthur Heymans
pci ops happen to work on this struct device since the device_path is an union. This patch still keeps adding the fixed resources in the pci_domain ops since moving it to the PCI ops which could properly use the function argument for PCI operations would require all PCI IDs to be added or else breakages are to be expected. Change-Id: Id73c16fad4fb9ece78595844a39da993d169f057 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27244 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-30x4x/raminit_ddr23: use MCHBAR AND/OR/AND_OR macros [1/2]Felix Held
When using timeless builds and coreboot crossgcc 6.3.0, the checksum of the resulting binary doesn't change with applying this commit. Change-Id: I057abe314622e92000c7e4ff2faa4595edb5244b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/27717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-31 05:48:02 +0000