summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2021-05-20soc/amd/common: Show espi init in logMartin Roth
BUG=None TEST=See espi init messages in the log. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9f856402ed9a026427d3529e6d61450b0623fe48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19soc/amd/common/block/espi_util: Work around in-band reset race conditionRaul E Rangel
When performing an in-band reset the host controller and the peripheral can have mismatched IO configs. i.e., The eSPI peripheral can be in IO-4 mode while, the eSPI host will be in IO-1. This results in the peripheral getting invalid packets and thus not responding. This causes the NO_RESPONSE status bit to be set and cause eSPI init to fail. If the peripheral is alerting when we perform an in-band reset, there is a race condition in espi_send_command. 1) espi_send_command clears the interrupt status. 2) eSPI host controller hardware notices the alert and sends a GET_STATUS. 3) espi_send_command writes the in-band reset command. 4) eSPI hardware enqueues the in-band reset until GET_STATUS is complete. 5) GET_STATUS fails with NO_RESPONSE and sets the interrupt status. 6) eSPI hardware performs in-band reset. 7) espi_send_command checks the status and sees a NO_RESPONSE bit. As a workaround we allow the NO_RESPONSE status code when we perform an in-band reset. BUG=b:186135022 TEST=suspend_stress_test and S5->S0 tests on guybrush and zork. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I71271377f20eaf29032214be98794e1645d9b70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-19soc/amd/cezanne/fch: add PCIe GPP clock generator configuration settingsFelix Held
I'm not 100% sure if this should rather be duplicated from Picasso or commonized. Checked with the docs and this won't be compatible with Stoneyridge and one future product's PPR lacked the corresponding register. Some other chip has a compatible register layout, but a different number of PCIe GPP clock outputs, so the common code would need to use some SoC-dependent defines and possibly a SoC-specific lookup table for the mapping which is also not that great. TEST=Checked Cezanne PPR Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b6d0cb8d7eb0288d8a18fcb975dc377b2c6846a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54685 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19soc/amd/picasso: move gpp_clk_req_setting definition to chip.hFelix Held
Since this enum is only used for the devicetree settings and not for the hardware itself, move it from the southbridge header to the chip one. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0907fc5cba9315fec5fabff67d279c6d95d1c9f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54684 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-16soc/amd/*/Makefile.inc: Strip the quotesZheng Bao
PSP_SOFTFUSE_BITS used to be like this: 15 0 29 "28 6" It causes internal shell report error: /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file /bin/sh: -c: line 0: unexpected EOF while looking for matching `"' /bin/sh: -c: line 1: syntax error: unexpected end of file Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-14soc/amd/cezanne: Enable GFX HDA FSP UPDKarthikeyan Ramasubramanian
By default, FSP disables the GFX HDA. Enable it to support HDMI Audio functionality. BUG=b:186479763 TEST=Build and boot to OS in guybrush. Ensure that the GFX HDA is enumerated in lspci output. 04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637 Change-Id: I42cb26c44bbca3d937c5d52736c42468139f7b07 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54100 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-13soc/amd: factor out acpigen_write_alib_dptc to common codeFelix Held
Also drop unneeded intermediate cast to void * before casting the address of the struct dptc_input type variables to uint8_t *. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13soc/amd/cezanne/root_complex: generate DPTC ACPI methodFelix Held
This adds support for convertible devices to support different maximum power and thermal configurations. The dynamic power and thermal configuration (DPTC) via ACPI ALIB calls allows to change the parameters during runtime. This code contains the assumption that \_SB.PCI0.LPCB.EC0.TBMD exists when ACPI code calls the DPTC method. At the moment only chromeec declares EC0.TBMD, but it's also the only code that calls the DPTC method. The definition of DPTC_INPUTS isn't moved to the common code directory, since it's currently unsure if we might need to configure more than those 4 parameters for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibdfc056cb325a32d87505dd93e01c9af81dfd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-12soc/amd/cezanne/chip.h: add DPTC and tablet mode optionsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I39218b79a79f1ccaf1a58408c6bb5161acea64aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54073 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12psp_verstage: remove not-implemented files for cezanneKangheui Won
Cezanne PSP is missing implementations for some svc apis. Do not include files related to missing svc apis. This CL should be reverted after the cezanne PSP supports these functions. BUG=b:187906425 Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ibaab4e8435624d403ef18e980146ebfd1598b61b Reviewed-on: https://review.coreboot.org/c/coreboot/+/53905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-12soc/amd/{common,picasso}: Use common PCIE_GPP_DRIVER driverRaul E Rangel
This will change the names of the GPP bridges, but this ok since there is no hand written ASL that references these names. BUG=b:184766519 TEST=Boot picasso and dump ACPI Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic09200156e8a37bd1a29ca95a17c8f8ae2b92bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54028 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-12soc/amd/common/block/pci: Capitalize PCI ACPI namesRaul E Rangel
Lowercase characters are not valid ACPI identifiers. BUG=b:184766519 TEST=Boot picasso to OS and verify ACPI errors are no longer printed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I75aca67f4607e97ced8ac00ac68e51c359aff944 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-12soc/amd{common,cezanne}: Move pcie_gpp.c to commonRaul E Rangel
Cezanne and Picasso can now use the same driver. BUG=b:184766519 TEST=Boot guybrush and dump ASL. Verified it didn't change. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie4ede82935d6c69b323c1fdceaa61e306aa2820a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-05-11soc/amd/picasso: Disable CBFS MCACHE againRaul E Rangel
This is still causing boot errors on zork: coreboot-4.13-3659-g269e03d5c42f Fri May 7 22:03:11 UTC 2021 bootblock starting (log level: 8)... Family_Model: 00820f01 PSP boot mode: Development Silicon level: Pre-Production Set power off after power failure. PMxC0 STATUS: 0x800 BIT11 I2C bus 3 version 0x3132322a DW I2C bus 3 at 0xfedc5000 (400 KHz) FMAP: area COREBOOT found @ 875000 (7909376 bytes) ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106 BUG=b:177323348 TEST=Boot ezkinil to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I68b4b73670e750207414f0d85ff96f21481be8ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/53933 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/amd/picasso: move acpigen_dptc_call_alib to new common alibFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0f7da12429b6278d1e4bc5d6650c7ee0f3b5209 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10Revert "soc/amd/common/espi: Don't set alert pin in espi_set_initial_config"Raul E Rangel
This reverts commit 6eced03b25954e370e20e62f2cbe41f9d5626eae. This prevents zork from booting. We get the following error: eSPI cmd0-cmd2: 00080009 00000000 00000000 data: 00000000. Error: unexpected eSPI status register bits set (Status = 0x10000010) Error: Slave GET_CONFIGURATION failed! This isn't a pure revert. It is more of a fix that keeps the old behavior. BUG=b:187122344 TEST=Boot zork an no longer see eSPI error Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If75a35d3994b0fd23945a450032d3cc81abeb136 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53932 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10soc/amd/cezanne: Force resets to be coldMarshall Dawson
Cezanne must use cold resets. Change the warm reset request to always set TOGGLE_ALL_PWR_GOOD. And, since the bit is sticky across power cycles, set it early for good measure. BUG=b:184281092 TEST=Majolica successfully resets using 0xcf9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I7d4ca5665335b20100a5c802d12d79c0d0597ad9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-05-10cezanne/psp_verstage: update SRAM addressKangheui Won
Loading address and size for the user app has been changed with recent PSP release. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: If247cdf3413c6a10f4b3c92fb7e43dd1057865d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-10amd/cezanne: verify transfer buffer in bootblockKangheui Won
Verify if transfer buffer is valid before progressing further to catch invalid transfer buffer early. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I4c470b156944b50e581dcdee47b196f46b0993f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52965 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: differentiate bios entryKangheui Won
AMDFW tool stores bios dir entry to bios1_entry in picasso but bios3_entry in cezanne. Separate getting bios_dir_addr into a function and implement it on each platforms. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10psp_verstage: move platform-specific code to chipset.cKangheui Won
Move all platform-specific code except direct svc calls to chipset.c. There will be differences between each platforms and we can't put everything into svc.c. TEST=build firmware for zork Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: clean up duplicated targetKangheui Won
psp_verstage.bin target is already defined at common/psp_verstage/Makefile.inc, thus removing it here. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ica4b09282d1c4cfc555c18ba50951458b8580826 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52962 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-10cezanne/psp_verstage: populate a/b firmwareKangheui Won
Build amdfw_[ab] and put them into CBFS. We can reuse FW_[AB] position from zork since we have same flash layout and size. Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Idb31afa7a513f01593b2af75515a170dfca8d360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52961 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Generate PCI GPP ACPI namesRaul E Rangel
We can generate the names, so there is no need to hard code a table. This will make the code more generic so it can be reused with picasso in the future. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5134d1dba4fcb9ce8cc4bfad1c619331a95f3b11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52870 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Enable GNB IO-APIC _PRTRaul E Rangel
We can now use the GNB IO-APIC. BUG=b:184766519 TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I4df5a4583f14044d2efcde3a9de9dd85e898a11d Reviewed-on: https://review.coreboot.org/c/coreboot/+/53936 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: add GNB IOAPIC supportFelix Held
To configure and enable the IOAPIC in the graphics and northbridge (GNB) container, FSP needs to write an undocumented register, so pass the GNB IOAPIC MMIO base address to make it show up at that address. BUG=b:187083211 TEST=Boot guybrush and see IO-APIC initialized IOAPIC[0]: apic_id 16, version 33, address 0xfec00000, GSI 0-23 IOAPIC[1]: apic_id 17, version 33, address 0xfec01000, GSI 24-55 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1e127ce500d052783f0a6e13fb2ad16a8e408b0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52905 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/cezanne: Generate PCI routing tableRaul E Rangel
Use the new acpigen_write_PRT to write the _PRT for each PCI bridge. BUG=b:184766519 TEST=Dump guybrush ACPI table and verify it looks correct. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idb559335435a95e73640e6d7fb224e16e0592326 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/cezanne: Populate PCI_INTR registersRaul E Rangel
This uses the new FSP PCI methods to pull the routing table and populate the pirq data structure. BUG=b:184766519 TEST=Boot guybrush and verify we get Got IRQ 0x1F (disabled) messages Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie21229cc2fb4fd5b85c0b9e933f7b43af24864b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/common/fsp/pci: Add helper methods for PCI IRQ tableRaul E Rangel
These are helper methods for interacting with the AMD_FSP_PCIE_DEVFUNC_REMAP_HOB_GUID. BUG=b:184766519, b:184766197 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id03d0b74ca12e7bcee11f8d13b0e802861c13923 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/picasso/pci_gpp: Switch to using acpigen_write_pci_GNB_PRTRaul E Rangel
We can now delete the picasso specific version. BUG=b:184766519 TEST=Build zork and verify SSDT has not changed Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ic79014e83c9ff63cc7a6757b16764ae23b36984f Reviewed-on: https://review.coreboot.org/c/coreboot/+/53935 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/common/block/pci: Implement acpigen_write_pci_{GNB,FCH}_PRTRaul E Rangel
This is loosely based off of picasso/pcie_gpp.c. This version uses the acpigen_write_PRT_X methods to write the actual records. There are also two functions, 1 for using the GNB, and one for using the FCH. The FCH one is useful when the GNB IO-APIC has not been initialized. BUG=b:184766519 TEST=Dump guybrush ACPI and verify it looks correct Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I926430074acb969ceb11fdb60ab56dcf91ac4c76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/{picasso,common/blocks/pci}: Move populate_pirq_dataRaul E Rangel
The method now dynamically allocates the pirq structure and uses the get_pci_routing_table method. BUG=b:184766519 TEST=Build guybrush and verify picasso SSDT has not changed. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I297fc3ca7227fb4794ac70bd046ce2f93da8b869 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-09soc/amd/picasso: Migrate to struct pci_routing_infoRaul E Rangel
This allows us to use the common get_pci_routing_info and pci_calculate_irq. The IRQ field in the struct was also filled in from the PPR. BUG=b:184766519 TEST=Boot ezkinil and verify SSDT table is identical. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I16d90d8c89bfcf48878c0741154290ebc52a4120 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53923 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-09soc/amd/common/block/pci: Introduce struct pci_routing_infoRaul E Rangel
This struct is similar to `struct pci_routing` defined in picasso/pcie_gpp.c. It additionally contains the irq used for the bridge and is structured in a way that the FSP can provide via HOB. The next set of CLs will migrate the pci routing functions used by picasso into common and enable pci routing table generation for cezanne. BUG=b:184766519 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1a8d988d125f407f0aa7bc1722d432446aa9aff8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-08soc/amd/cezanne/acpi/soc: call WAL1 for AC/DC state ALIB callFelix Held
BUG=b:187212773, b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2cf50257d767525d682602cdcc5547bf001fe2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/53921 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso/acpi/cpu: move WAL1 method that calls ALIB to commonFelix Held
TEST=Mandolin still boots into Linux and there's no ACPI warning in dmesg. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7e6d38ebeae5e55a4a65930b989838532ab9c446 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53920 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso,common: move ALIB DPTC parameter struct to common codeFelix Held
Also add an alib_ prefix to avoid possible name collisions. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib0f220a4cde6da764bb8bc589b5f44ae16496bd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53918 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso,common: move ALIB DPTC IDs to common codeFelix Held
These parameter IDs are defined in the AGESA Interface specification #55483. This patch also adds a ALIB_DPTC_ prefix to the IDs and makes the names more consistent. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I75e0504f6274ad50c53faa8fcbde4d6821d85a04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53917 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd/picasso/root_complex: move DPTC_TOTAL_UPDATE_PARAMS out of enumFelix Held
The other enum entries are control IDs for the ALIB_FUNCTION_DYNAMIC_POWER_THERMAL_CONFIG ALIB function while DPTC_TOTAL_UPDATE_PARAMS is the total number of configuration settings that will get passed as parameter in the ALIB call, so it shouldn't be part of that enum. TEST=Timeless build for Mandolin results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0cb9e9d2ba579a74d916011b4ead71cc86d69a24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53916 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-08soc/amd: factor out ACPI ALIB function numbers to common codeFelix Held
The ACPI ALIB function numbers are defined in the AMD Generic Encapsulated Software Architecture (AGESA™) Interface Specification (document #55483). TEST=Timeless build stays the same for Mandolin (Picasso) and Gardenia (Stoneyridge). Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I290ef0db32c65ebb2bbbe4f65db4df772b884161 Reviewed-on: https://review.coreboot.org/c/coreboot/+/53915 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07soc/amd/common/acpi/pci_int.asl: Allow IRQ sharingRaul E Rangel
PCI interrupts are level active low, so they can be shared. BUG=b:184766519 TEST=Boot guybrush to OS with `pci=nomsi amd_iommu=off noapic` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I439337dd66fe56790406c6d603e73512c806a19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/52957 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-07soc/amd/common: Add Kconfig/Makefile support for common/fsp/*Raul E Rangel
This will allow us to have subdirectories in common/fsp. BUG=b:184766519 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib3497791e1963867c8fe06a42c111e5d0503ade1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-06soc/amd/common/espi,mb/: Allow configuring open drain ALERT#Raul E Rangel
Some designs might wish to use an open drain eSPI ALERT#. This change adds an enum that allows setting the eSPI alert mode. BUG=b:187122344, b:186135022 TEST=Boot guybrush using all 3 alert modes Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-06soc/amd/common/espi: Don't set alert pin in espi_set_initial_configRaul E Rangel
The eSPI spec says that the Alert Mode defaults to in-band on reset. This change ensures the controller is in sync with the eSPI peripheral. The configured alert mode is configured in espi_set_general_configuration. BUG=b:187122344, b:186135022 TEST=Boot guybrush and make sure we don't get any eSPI errors. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib43e190d08d77ecfcd22ead2bf42e5de2202b555 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52953 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/common/espi: Print set eSPI peripheral configRaul E Rangel
This will print the config we are setting on the eSPI peripheral. e.g., Setting general configuration: slave: 0x98a00000 controller: 0xe2000000 eSPI Slave configuration: CRC checking enabled Dedicated Alert# used to signal alert event eSPI quad IO mode selected Only eSPI single IO mode supported Alert# pin is open-drain eSPI 33MHz selected eSPI up to 20MHz supported Maximum Wait state: 0 BUG=b:187122344, b:186135022 TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1a2382d8ab3d3f0d14a139c57470cb895112eca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52952 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/{common/picasso}: Move pci_int.aslRaul E Rangel
We can share this with cezanne. BUG=b:184766519 TEST=Build picasso Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If746d55345f6b7c828376b64adc5532d20413f68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52916 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-06soc/amd/{picasso/common}: Move populate_pirq_data prototype to commonRaul E Rangel
This method signature will also be used by cezanne, so move it to common. BUG=b:184766519 TEST=Build picasso Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I421bdad51776278f83148174e6f72bdc38249e54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-05soc/amd/cezanne/agesa_acpi: add add_agesa_fsp_acpi_table callFelix Held
this adds the ALIB SSDT that gets passed from the FSP to coreboot via a HOB. BUG=b:185481298 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a7dae5789eee442b321ddf276494eb53fc5f499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-05soc/amd/cezanne/agesa_acpi: add and call agesa_write_acpi_tablesFelix Held
This function will be used to add some SSDTs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia88cb5ea483850a8659f3bae8040c82eb2735d26 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 14:56:19 +0000