summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2018-03-22amd/stoneyridge: Add PM1 wake status to boot logMarshall Dawson
Print the wake status bits to the console. The format is kept similar to Intel's to maintain compatilibity with inspection utilities. Add relevant wake events from the register to the ELOG. Clear the register before continuing. TEST=Inspect console and ELOG for Grunt BUG=b:75020968 Change-Id: Idc9d12326abb290e4f7a5c60677eb6e057d475b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
The GPIO programming of configure_stoneyridge_UART() can be done by the early GPIO table, AOAC enabling was already removed. So configure_stoneyridge_uart() became redundant. Remove procedure configure_stoneyridge_uart(). BUG=b:74258015 TEST=Build and boot kahlee, observing serial output does not changes from previous serial output. Change-Id: Ie67051d7b90fa294090f6bfc518c6c074d98cc98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25192 Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-17soc/amd/stoneyridge: Call sb_spibase() earlyGarrett Kirkendall
Call sb_spibase() early so that it will set up the SPI base address. This is another step to moving AGESA calls out of the bootblock. BUG=b:74427893 BRANCH=master TEST=Build and boot Grunt. Change-Id: I665d32f3acb0046eb6abbd363735561f0372f2a0 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-16soc/amd/stoneyridge: Create a HALT_THIS_AP calloutRichard Spiegel
It was required for all cores use the same CAR teardown function (exit_car.S and gcccar.inc). AGESA has already been modified to do the AP to do the call out. Create assembly code to call chipset_teardown_car and then enter an endless loop with halt instruction. Then create the call out that will call this new assembly code. BUG=b:70338633 AGESA COMMIT=3313d277 TEST=Created a debug version of AGESA that would print the returned status of HALT_THIS_AP. Build code without the fix, see the return. Build code with the fix, see that there's no return. Change-Id: I05ee405812211d93dfdbdc5ee7d9978c2eb585e1 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/24999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-16soc/amd/stoneyridge/southbridge.c: Create AOAC initialization codeRichard Spiegel
Devices that need to have their AOAC register enabled do have a delay before they become available. Currently each device has their own wait loop. Create a procedure that initializes all AOAC devices in a table and wait for all AOAC to become alive, then call this new procedure before the call to initialize the UART. Then change all procedures that initialize some AOAC by moving the devices to the table and removing AOAC initialization code. BUG=b:74416098 TEST=Build and boot kahlee checking that UART is sending debug messages out. Change-Id: I359791c2a332629aa991f2f17a67e94726a21eb5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-15soc/amd/stoneyridge: Call sb_acpi_mmio_decode()Garrett Kirkendall
Call function sb_acpi_mmio_decode() from bootblock_fch_early_init(). This enables decoding of the FCH ACPI MMIO regions 0xfed80000 - 0xfed81fff. This is another step to moving AGESA out of the bootblock for StoneyRidge BUG=b:74586747 BRANCH=master TEST=Build and boot on Grunt. Change-Id: I8cf329e5cd2002b225742fefa5c1ddd2598de674 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25161 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14soc/amd/stoneyridge: Configure FCH for TPMGarrett Kirkendall
In preparation for moving AGESA calls out of the bootblock: * Add sb_tpm_decode to enable FCH decoding of TPM 1.2 regions and Legacy TPM IO 0x7f-0x7e and 0xef-0xee * Modify sb_tpm_decode_spi to additionally call sb_tpm_decode. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: I0e2399e113c765393209dd11fd835fc758cf3029 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-09soc/amd/stoneyridge: Add function to enable I2C host controllersGarrett Kirkendall
In preparation for moving AGESA calls out of bootblock: Add function to enable the four stoneyridge I2C engines. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: Icb55c49cf56c65a9c2e1838cff1ed5afc04e1826 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25026 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09soc/amd/stoneyridge: Add ACPI MMIO enable functionGarrett Kirkendall
In preparation for moving AGESA calls out of bootblock: * Add definitions for needed registers in southbridge.h * Add function to enable AMD FCH ACPI MMIO regions 0xfed80000 to 0xfed81ffff. Will be called by a later commit. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build boot Grunt (with other changes to call code not committed at this time) Change-Id: If26efa6c6f5b562ba898e7d9da4827833310dc26 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25025 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-07soc/amd/stoneyridge/Kconfig: Create a power restore optionRichard Spiegel
File soc/amd/stoneyridge/sm.c has a CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL that's not used at all and has no control. It's also not used in the build process. Remove the define from sm.c, create a true Kconfig definition and use it to define if power should be restored after a power failure/recovery. BUG=b:72873003 TEST=Build kahlee. Use serial output to check what is being programmed to RTC shadow. Build with and without selecting the Kconfig parameter. Then remove serial output and leave the parameter unselected (always S5 at power recovery). Change-Id: Iec82cb68cf1e2a820e610f12d8620488662232aa Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-07soc/amd/stoneyridge: clean up southbridge.cGarrett Kirkendall
* Limit dependency on vendorcode header files and use defines from iomap.h and southbridge.h * Factor out to functions, device power-on code for AMBA and UART. BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: Ibcf4d617e2a0a520a6d7e8d0d758d7a9705a84ea Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-07soc/amd/stoneyridge: clean up OSCOUT1_ClkOutputEnbGarrett Kirkendall
Change OSCOUT1_ClkOutputEnb programming to use registers from iomap.h and southbridge.h BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: Ib138dae6057394740c415e882e4dbd925882c2de Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-07soc/amd/stoneyridge: Add southbridge definitionsGarrett Kirkendall
* Add definitions to iomap.h for AMD ACPI MMIO base addresses. * Add FCH AOAC registers for enabling FCH devices. * From: BIOS and Kernel Developer's Guide (BKDG) for AMD Family 15h, Models 70h-7Fh Processors Rev 3.04 BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: I45c1d1d7edc864000282c7ca4e2b8f2a14ea9eac Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/24998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-06soc/amd/stoneyridge: Add ST/CZ SMBus device idMartin Roth
The SMBus PCI device ID for Stoney wasn't updated when the code was pulled over from hudson. This means that the IOAPIC wasn't being initialized in coreboot. BUG=b:74070580 TEST=Boot Grunt, see IOAPIC init messages in console. Change-Id: Ida5d3f3592488694681300d79444c1e26fff6a1a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/24930 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01soc/amd/stoneyridge: Remove printk for GPIOJustin TerAvest
The printk() calls in sb_program_gpios() aren't necessary, and incur a 13 second delay if the function is called from bootblock_mainboard_early_init(). This commit removes them so GPIOs can be set up earlier. TEST=call sb_program_gpios from bootblock_mainboard_early_init BUG=b:73898539 Change-Id: I064291decf47d86132e36469e029b3262ec20172 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/24915 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-26soc/amd/stoneyridge: Refactor northbridge resource allocatorMarc Jones
The resource allocator was overly complicated due to porting from a multi-node resource allocator. It had some assumptions about the UMA memory and where it would be located. The refactored allocations account for UMA being reserved above 4GiB. TEST=Check CBMEM table has correct RAM regions. Change-Id: I722ded9fb877ec756c3af11fcb5fea587ac0ba8e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common: Save the UMA settings from AGESAMarc Jones
Save the UMA base and size settings returned by AGESA in amdinitpost(); Change-Id: Id96cc65582118ad41d397b1a600cab1615676a55 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common/block/pi/amd_late_init.c: Fix part numberRichard Spiegel
Kahlee DIMM have invalid string when it comes to part number (bytes 0x149-0x15c). We currently force a NA string, but grunt has the proper strings. Just let the string go through, and a second commit within smbios.c will be responsible for testing the string and taking proper action. BUG=b:73122207 TEST=Build, boot and record serial output for kahlee while injecting different strings to dmi17->PartNumber. Remove string injection before committing. Change-Id: I427262873f9ec80f459245e5f509e28a68de3074 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-22soc/amd/stoneyridge: Add readable macros for GPIOJustin TerAvest
This commit defines a set of macros for defining GPIO configuration that are easier to read than the raw iomux function values used today. TEST=None BUG=b:72875858 Change-Id: Ie100c8494c565afa28fa44d78ff73155fc8c7ea8 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23828 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-21soc/amd/stoneyridge: Add functions for GPIO interruptsChris Ching
Add a function to configure interrupt settings for a GPIO. This does not currently configure GEVENT signals. The second function returns the GPIO interrupt status and clears the flag if set. BUG=b:72838769 BRANCH=none TEST=Update and test interrupt settings for GPIO_9 on grunt Change-Id: I1addd3abcb6a57d916b1c93480bacb0450abddf2 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21soc/amd/stoneyridge: Add UMA save functionMarc Jones
Save the UMA values from AGESA to use in resource allocation in ramstage. Change-Id: I2a218160649d934f615b2637ff122c36b4ba617e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23817 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-20src/soc: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
This makes the flow for GPIO initialization more closely follow that what is performed for other boards so that it's easier to read the flow (and stops relying on BS_WRITE_TABLES). BUG=b:72875858 TEST=Built and booted grunt, built gardenia. Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23679 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-16amd/stoneyridge: Move model_15_init.c to cpu.cMarshall Dawson
Move the remaining model_15_init.c functionality to cpu.c, making it similar to other soc implementations. Change-Id: Ic8c62b09209fcdaa50ff8ffc7773ef155f979a1b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-02-16amd/stoneyridge: Use generic fixed MTRR setupMarshall Dawson
Add the X86_AMD_FIXED_MTRRS select back to Kconfig. This got lost when stoneyridge was converted from a cpu/northbridge/southbridge implementation to soc/. Remove the setup from model_15_init.c because this is duplicated functionality. BUG=b:68019051 TEST=Boot Kahlee, check steps with HDT Change-Id: Id5526dcff12555efccab811fa3442ba1bff051bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/amd/stoneyridge/spi: Use correct conversion specifierPaul Menzel
Use the correct conversion specifier `z` for `size_t` to fix the error below. ``` error: format '%lx' expects argument of type 'long unsigned int', but \ argument 4 has type 'size_t {aka unsigned int}' [-Werror=format=] ``` Found-by: gcc (Debian 7.3.0-3) 7.3.0 Change-Id: I05d3b6c9eec0ebf77cdb9e9928037e837f87ea03 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/23770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/amd/common/block/pi/amd_init_late.c: Transfer memory info to cbmemRichard Spiegel
SMBIOS structure type 17 is not being generated because memory info is not being stored to cbmem. This has to happen after AGESA AmdInitLate has run, but before SMBIOS is generated. There's a need to convert format between AGESA generated info, and what is required in cbmem. Create a procedure that transfers information between AGESA and cbmem, and call it from agesawrapper_post_device() after AmdLateInit is called. BUG=b:65403853 TEST=build and run kahlee, verify if SMBIOS structure type 17 is being generated, and if associated strings are what should be expected. Change-Id: I151a8f1348c9bafceb38bab1f79d3002c5f6b31b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15soc/amd/common/block/s3/s3_resume.c: Check mrc_cache_get_current() returnRichard Spiegel
Procedure mrc_cache_get_current() returns -1 for error, 0 for pass. Do check the return in procedure get_s3nv_info. This fixes CID 1385943 BUG=b:73333332 TEST=Build kahlee Change-Id: I0f6a58380a38d13120e997dcd966423d3c2af091 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14soc/amd/stoneyridge: Set up LAPICMarc Jones
LAPIC setup is required to set virtualwire mode for legacy interrupts. This was omitted when stoneyridge was changed to use the common mp_init. BUG=b:72351388 TEST=Verify keyboard now works in SeaBIOS Change-Id: I648d8b5b5a3744a5781446c7cb72934a071f9a72 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23718 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12amd/stoneyridge: Add S3 support to POSTMarshall Dawson
Add/update the romstage and ramstage paths to check for S3 resume and call the appropriate AGESA functions. TEST=Suspend/Resume Kahlee with full S3 patch stack BUG=b:69614064 Change-Id: Ie6ae66f88b888fff3a800b4ed55dd1f6fed712b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12soc/amd/common: Call AmdS3FinalRestoreMarshall Dawson
AMD support in coreboot has typically not used the AmdS3FinalRestore() Entry Point. Add a call to it immediately prior to resuming to the OS. BUG=b:69614064 TEST=Check console log for execution Change-Id: Iadc4438d8cda9766002f6edade3c7b00b23b98b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Add S3 resume functions to wrapperMarshall Dawson
Add new functions that can execute InitRtb, InitResume, LateResume, and FinalResume. Note that the name AmdInitRtb supersedes the deprecated AmdS3Save. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: I5c6a9c1a679a1c4d3f7d1d3b41a32efd0a2c2c01 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Replace missing AmdReleaseStruct() callsMarshall Dawson
The AGESA spec states that "Failure to release a structure can cause undesired outcomes." Uncomment the one in AmdInitLate(). The function only dealocates the structure used for the AGESA entry point, and not the internal data used by coreboot. Release the structure in AmdInitEnv(). This appears to have been an omission years ago when duplicating agesawrapper.c for every mainboard was still common. BUG=b:70671742 TEST=Build and boot Kahlee, inspect console log Change-Id: Ib1ff94ec2acdc845c5e4b4ed7088061cfc0c55f3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22888 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12soc/amd/common: Add S3 supporting functionsMarshall Dawson
Add functions that the wrapper will call to get and save the S3 data. The wrapper requires two types of data saved: * Non-volatile: Information that is the minimum required for bringing the DRAM controller back online. This change uses the common mrc_cache driver to manage the storage * Volatile: May be stored in DRAM; information required to complete the system restoration process. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ie60162ea10f053393bc84e927dbd80c9279e6b63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-10soc/amd/stoneyridge: Put outl arguments in correct orderMartin Roth
outl takes value then port. BUG=b:72130849 Test=None Change-Id: I010c8a4462e6e27f3d335b95305dfdb137453869 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-07soc/amd/common: Add generic create_struct call to wrapperMarshall Dawson
Create a generic function that reports an unsuccessful call to AmdCreateStruct(). Change-Id: I2654b4f21de5a2621086142681181a687be2c8e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-07soc/amd/common: Improve misc. formatting in AGESA wrapperMarshall Dawson
Improve the file with: * C99 inializations for structures * reorder include files for aesthetics * remove extraneous whitespace * remove a stale comment * make variable naming consistent * make function arguments consistent This change clears up all remaining checkpatch issues with the wrapper with the exception of errors created with AMD definitions, e.g. ERROR: need consistent spacing around '*' (ctx:WxV) #32: FILE: src/soc/amd/common/block/pi/agesawrapper.c:32: void __attribute__((weak)) SetFchMidParams(FCH_INTERFACE *params) {} BUG=b:62240746 TEST=Build and boot Kahlee Change-Id: I40985e0cf50df6aa4d830937e7f6b6e7908f72fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07amd/stoneyridge: Put stage cache into TSEGMarshall Dawson
Add a function to allow an external region to be located in TSEG. Select the option to use memory outside of cbmem. Increase the size reserved in TSEG. Change-Id: Ic1073af04475d862753136c9e14e2b2dde31fe66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06soc/amd/stoneyridge/acpi/sleepstates.asl: Fix guarded codeRichard Spiegel
Remove #if statement and replace it with if(IS_ENABLED(...)) per coreboot recommendations. BUG=b:62200858 TEST=Build kahlee. Change-Id: I268b228706a625e1415c4f24e808261c279ba41e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06soc/amd/stoneyridge: Add API to initialize non-early_init i2c busesDaniel Kurtz
Provide a method for initializing i2c buses that are not marked as early_init in the device tree. These i2c buses can be enabled in a mainboard's ramstage, for example. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I6e49b0de9116138ba102377d283e22d7b50d7dca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-02-05soc/amd/stoneyridge/acpi/sb_pci0_fch.asl: Fix instabilityRichard Spiegel
A file that has several methods cannot be included inside a method. It has to be included inside a scope, but not inside a method or it'll cause problems (instability). There is an ugly construction in method _INI. It's needed because if AmdImc is not included then the call to ITZE would break the build. BUG=b:62200858 TEST=Build kahlee. Change-Id: If6c877df5a87df1b348de92868b91eed4a76de55 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-01amd/soc/common: Remove cbmem subregions in heapMarshall Dawson
Revert most of 4f3f47b "amd/common: Define regions in cbmem". This puts the management of the heap space back to its traditional methodology. Subsequent patches that were to have used these subregions have been reworked. BUG=b:69614064 Change-Id: Ib3d40bcf61c50dbc481b60e7b5286f65a529b912 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-31amd/stoneyridge: Move TValid and SmmLock to end of POSTMarshall Dawson
Delay making TSEG valid until the end of POST. After the CPU setup, there are times where coreboot needs to access the SMRAM from outside of SMM. Also relocate locking of the SMM settings from the CPU init to the end of POST (or just before resuming). Change-Id: I70b7e33e7045d397e41f571caff6a2acbb64eaab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-30soc/amd/stoneyridge: initialize i2c buses marked as early initAaron Durbin
Initialize the i2c buses that are marked as early init in the device tree. BUG=b:70232394,b:69250772 Change-Id: Iced1797f3bb4765646736c423b081cdc33c12a48 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-30soc/amd/stoneyridge: fix gpio_acpi_path()Aaron Durbin
The path for the GPIO devices needs to be '\_SB', not '\SB'. Fix the path so that it references the system bus. BUG=b:72121803 Change-Id: I7c6c38ecea0f8f95ff52b3390f92c5b7e79bcd6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23501 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-30soc/amd/stoneyridge: use new host controller programmingAaron Durbin
The SPI controller on stoneyridge apparently has a large fifo and an alternate method for programming the controller. The fifo is directly accessible as well as the rx and tx pointer in addition to the execute bit. Remove the unneeded #defines and program the host controller with the above changes in mind. In addition, add debug hooks to the driver so one can dump the state of the controller when in operation. The time it took to read 4KiB of flash in the elog driver went from 20593 microseconds to 5693 microseconds on cdx03/kahlee. BUG=b:65485690 Change-Id: Ie7ea9d18cef5511686700ad9b2b9fdfeb6d5685b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23493 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-30soc/amd/stoneyridge: utilize full SPI flash controller fifoAaron Durbin
The spi flash host controller has a dedicated register for the opcode. Therefore, indicate to the spi subsystem that the opcode size should not be taken into account when determining maximum payload size in spi_crop_chunk(). This allows the full use of the fifo when doing transfers. BUG=b:65485690 Change-Id: Iab27a69ca72fd02bc443f0673983f3b22ffca0f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23492 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-30drivers/spi: support cmd opcode deduction for spi_crop_chunk()Aaron Durbin
spi_crop_chunk() currently supports deducting the command length when determining maximum payload size in a transaction. Add support for deducting just the opcode part of the command by replacing deduct_cmd_len field to generic flags field. The two enums supported drive the logic within spi_crop_chunk(): SPI_CNTRLR_DEDUCT_CMD_LEN SPI_CNTRLR_DEDUCT_OPCODE_LEN All existing users of deduct_cmd_len were converted to using the flags field. BUG=b:65485690 Change-Id: I771fba684f0ed76ffdc8573aa10f775070edc691 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23491 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-28amd/stoneyridge: Add NV storage to ramtopMarshall Dawson
The scratch registers in northbridge used for storing the top of cacheable memory are volatile. Use the BiosRam storage in the FCH instead. TEST=Suspend and resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ieb3cfd173c70bf899a6391d62d1df87b38485f30 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-26amd/stoneyridge: Convert BiosRam access to MMIOMarshall Dawson
Change the BiosRam read/write functions to use the fixed MMIO range at 0xfed80500. This is faster than two accesses per byte when using I/O 0xcd4/0xcd5. Note that BiosRam may only be accessed byte-by-byte. It does not decode normally. Change-Id: I9d8baf2bd5d9d48a87bddfb6a0b86e292a8fdf7d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23436 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 02:02:36 +0000