summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts") Change-Id: I5730259bc6819defc482d31644e1f476679257b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25588 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11amd/stoneyridge: Reorder temp mtrr for flashMarshall Dawson
Relocate setting the temp range MTRR, for the SPI flash device, to after completion of mp_init. The mp_init functionality mirrors the BSP's exact MTRR settings into the AP cores. The ranges need to be the correct calculated values and not some temporary setting. This solves an MTRR sync issue on APUs with more than two cores, i.e. more than a single compute-unit. MTRRs within a CU are shared so the AP always stays in sync. BUG=b:77457944 TEST=run on Kahlee Change-Id: Idc4cccdf721e252bc87d6cba62a3406a9f19b940 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-10soc/amd/stoneyridege: Create AP jump structureRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, create infrastructure to pass a pointer to the AP cores, so they can jump directly to romstage. BUG=b:74236170 TEST=Build and boot grunt, actual test will be performed at a later patch. Change-Id: If716d1c1970746f2ad90ef71ae9062c99f219897 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-10soc/amd: Add "halt this AP" callback to romstageRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, callback function AGESA_HALT_THIS_AP must be available at romstage. BUG=b:74236170 TEST=Build and boot grunt, actual test will be performed at a later patch. Change-Id: I0992b2de5856881c19191ec4f637168727686524 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25527 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-09amd/stoneyridge: Add GNB IOAPIC initMarc Jones
Use standard coreboot function to set virtual wire mode on the GNB IOAPIC. BUG=b:74104946 TEST=Check GNB IOAPIC debug output on serial. Change-Id: I4ff8698419890df1459b1107f0861cf8277a99b0 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-04-06amd/common/block/pi: Make agesa_heap_base() staticMarshall Dawson
Convert agesa_heap_base() to static since it's unused outside of heapmanager.c. Change-Id: I3ee162985ca1ea36461ea413416d98451a700f8c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06amd/stoneyridge: Use defined value for SPI flash MTRRMarshall Dawson
Replace an absolute value with a #define value in bootblock. This is in preparation for using an additional MTRR in a subsequent patch. Change-Id: I006c7cfa0057b3ed4a21359fc8367caf6ec5baf3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-05mb/amd/gardenia/gpio.c: Convert GPIO to new formatRichard Spiegel
New macros were developed that replace previous way of defining GPIO, with pin and intention very clear while keeping the table mostly identical to previous method (there's no pull up or pull down when a GPIO is set as an output). Change current gardenia table to use the new macros. BUG=b:72875858 TEST=Build Gardenia. Change-Id: I402b95374cc5ba01bb961ebcb34d8e465b443c08 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-02src/soc/stoneyridge: Add a check for CMOS failureMartin Roth
BUG=b:77345148 TEST=Pull power from grunt, verify CMOS power failure is detected. Reboot and verify that CMOS power failure is not detected. Change-Id: Idbf0254e197a6d282e618a98bced52ea5a44917f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25468 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23soc/amd: Print dimm_info and TYPE17_DMI_INFO to help debug incorrect valuesRaul E Rangel
Example output: AGESA TYPE 17 DMI INFO: Handle: 1 TotalWidth: 64 DataWidth: 64 MemorySize: 8192 DeviceSet: 0 Speed: 1200 ManufacturerIdCode: 44416 Attributes: 1 ExtSize: 0 ConfigSpeed: 933 MemoryType: 0x1a FormFactor: 0xd DeviceLocator: DIMM 0 BankLocator: CHANNEL A SerialNumber(8): 00000000 PartNumber(20): HMAA51S6AMR6N-UH CBMEM_ID_MEMINFO: dimm_size: 0 ddr_type: 0x1a ddr_frequency: 1200 rank_per_dimm: 1 channel_num: 0 dimm_num: 0 bank_locator: 0 mod_id: 44416 mod_type: 0x1a bus_width: 64 serial(4): 0000 module_part_number(23): HMAA51S6AMR6N-UH ��@ dimm_size, mod_type, bus_width need to be updated so they return the correct values. module_part_number is missing a null terminator due to the AGESA part number being larger than the dimm_info buffer. Example dmidecode output: Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 8 bits Data Width: 8 bits Size: No Module Installed Form Factor: Unknown Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 1200 MT/s Manufacturer: Hynix/Hyundai Serial Number: 0000 Asset Tag: Not Specified Part Number: HMAA51S6AMR6N-UH Rank: 1 Configured Clock Speed: 1200 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown To enable the output set CONFIG_DEBUG_RAM_SETUP. The Kconfig change is required in order to enable CONFIG_DEBUG_RAM_SETUP, otherwise it's not a valid option. BUG=b:65403853 TEST=Test output shown above Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5eac00b9400056357915761287770a400b3f9f8b Reviewed-on: https://review.coreboot.org/25303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-22amd/stoneyridge: Add PM1 wake status to boot logMarshall Dawson
Print the wake status bits to the console. The format is kept similar to Intel's to maintain compatilibity with inspection utilities. Add relevant wake events from the register to the ELOG. Clear the register before continuing. TEST=Inspect console and ELOG for Grunt BUG=b:75020968 Change-Id: Idc9d12326abb290e4f7a5c60677eb6e057d475b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
The GPIO programming of configure_stoneyridge_UART() can be done by the early GPIO table, AOAC enabling was already removed. So configure_stoneyridge_uart() became redundant. Remove procedure configure_stoneyridge_uart(). BUG=b:74258015 TEST=Build and boot kahlee, observing serial output does not changes from previous serial output. Change-Id: Ie67051d7b90fa294090f6bfc518c6c074d98cc98 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25192 Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-17soc/amd/stoneyridge: Call sb_spibase() earlyGarrett Kirkendall
Call sb_spibase() early so that it will set up the SPI base address. This is another step to moving AGESA calls out of the bootblock. BUG=b:74427893 BRANCH=master TEST=Build and boot Grunt. Change-Id: I665d32f3acb0046eb6abbd363735561f0372f2a0 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-16soc/amd/stoneyridge: Create a HALT_THIS_AP calloutRichard Spiegel
It was required for all cores use the same CAR teardown function (exit_car.S and gcccar.inc). AGESA has already been modified to do the AP to do the call out. Create assembly code to call chipset_teardown_car and then enter an endless loop with halt instruction. Then create the call out that will call this new assembly code. BUG=b:70338633 AGESA COMMIT=3313d277 TEST=Created a debug version of AGESA that would print the returned status of HALT_THIS_AP. Build code without the fix, see the return. Build code with the fix, see that there's no return. Change-Id: I05ee405812211d93dfdbdc5ee7d9978c2eb585e1 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/24999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-16soc/amd/stoneyridge/southbridge.c: Create AOAC initialization codeRichard Spiegel
Devices that need to have their AOAC register enabled do have a delay before they become available. Currently each device has their own wait loop. Create a procedure that initializes all AOAC devices in a table and wait for all AOAC to become alive, then call this new procedure before the call to initialize the UART. Then change all procedures that initialize some AOAC by moving the devices to the table and removing AOAC initialization code. BUG=b:74416098 TEST=Build and boot kahlee checking that UART is sending debug messages out. Change-Id: I359791c2a332629aa991f2f17a67e94726a21eb5 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-15soc/amd/stoneyridge: Call sb_acpi_mmio_decode()Garrett Kirkendall
Call function sb_acpi_mmio_decode() from bootblock_fch_early_init(). This enables decoding of the FCH ACPI MMIO regions 0xfed80000 - 0xfed81fff. This is another step to moving AGESA out of the bootblock for StoneyRidge BUG=b:74586747 BRANCH=master TEST=Build and boot on Grunt. Change-Id: I8cf329e5cd2002b225742fefa5c1ddd2598de674 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25161 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-14soc/amd/stoneyridge: Configure FCH for TPMGarrett Kirkendall
In preparation for moving AGESA calls out of the bootblock: * Add sb_tpm_decode to enable FCH decoding of TPM 1.2 regions and Legacy TPM IO 0x7f-0x7e and 0xef-0xee * Modify sb_tpm_decode_spi to additionally call sb_tpm_decode. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: I0e2399e113c765393209dd11fd835fc758cf3029 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-09soc/amd/stoneyridge: Add function to enable I2C host controllersGarrett Kirkendall
In preparation for moving AGESA calls out of bootblock: Add function to enable the four stoneyridge I2C engines. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt (with other changes to call code not committed at this time) Change-Id: Icb55c49cf56c65a9c2e1838cff1ed5afc04e1826 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25026 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-09soc/amd/stoneyridge: Add ACPI MMIO enable functionGarrett Kirkendall
In preparation for moving AGESA calls out of bootblock: * Add definitions for needed registers in southbridge.h * Add function to enable AMD FCH ACPI MMIO regions 0xfed80000 to 0xfed81ffff. Will be called by a later commit. BUG=b:65442212 BRANCH=master TEST=abuild, build Gardenia, build boot Grunt (with other changes to call code not committed at this time) Change-Id: If26efa6c6f5b562ba898e7d9da4827833310dc26 Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25025 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-07soc/amd/stoneyridge/Kconfig: Create a power restore optionRichard Spiegel
File soc/amd/stoneyridge/sm.c has a CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL that's not used at all and has no control. It's also not used in the build process. Remove the define from sm.c, create a true Kconfig definition and use it to define if power should be restored after a power failure/recovery. BUG=b:72873003 TEST=Build kahlee. Use serial output to check what is being programmed to RTC shadow. Build with and without selecting the Kconfig parameter. Then remove serial output and leave the parameter unselected (always S5 at power recovery). Change-Id: Iec82cb68cf1e2a820e610f12d8620488662232aa Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-07soc/amd/stoneyridge: clean up southbridge.cGarrett Kirkendall
* Limit dependency on vendorcode header files and use defines from iomap.h and southbridge.h * Factor out to functions, device power-on code for AMBA and UART. BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: Ibcf4d617e2a0a520a6d7e8d0d758d7a9705a84ea Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-07soc/amd/stoneyridge: clean up OSCOUT1_ClkOutputEnbGarrett Kirkendall
Change OSCOUT1_ClkOutputEnb programming to use registers from iomap.h and southbridge.h BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: Ib138dae6057394740c415e882e4dbd925882c2de Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-07soc/amd/stoneyridge: Add southbridge definitionsGarrett Kirkendall
* Add definitions to iomap.h for AMD ACPI MMIO base addresses. * Add FCH AOAC registers for enabling FCH devices. * From: BIOS and Kernel Developer's Guide (BKDG) for AMD Family 15h, Models 70h-7Fh Processors Rev 3.04 BUG=b:69220826 BRANCH=master TEST=abuild, build Gardenia, build and boot Grunt Change-Id: I45c1d1d7edc864000282c7ca4e2b8f2a14ea9eac Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/24998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-03-06soc/amd/stoneyridge: Add ST/CZ SMBus device idMartin Roth
The SMBus PCI device ID for Stoney wasn't updated when the code was pulled over from hudson. This means that the IOAPIC wasn't being initialized in coreboot. BUG=b:74070580 TEST=Boot Grunt, see IOAPIC init messages in console. Change-Id: Ida5d3f3592488694681300d79444c1e26fff6a1a Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/24930 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-01soc/amd/stoneyridge: Remove printk for GPIOJustin TerAvest
The printk() calls in sb_program_gpios() aren't necessary, and incur a 13 second delay if the function is called from bootblock_mainboard_early_init(). This commit removes them so GPIOs can be set up earlier. TEST=call sb_program_gpios from bootblock_mainboard_early_init BUG=b:73898539 Change-Id: I064291decf47d86132e36469e029b3262ec20172 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/24915 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-26soc/amd/stoneyridge: Refactor northbridge resource allocatorMarc Jones
The resource allocator was overly complicated due to porting from a multi-node resource allocator. It had some assumptions about the UMA memory and where it would be located. The refactored allocations account for UMA being reserved above 4GiB. TEST=Check CBMEM table has correct RAM regions. Change-Id: I722ded9fb877ec756c3af11fcb5fea587ac0ba8e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common: Save the UMA settings from AGESAMarc Jones
Save the UMA base and size settings returned by AGESA in amdinitpost(); Change-Id: Id96cc65582118ad41d397b1a600cab1615676a55 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-26soc/amd/common/block/pi/amd_late_init.c: Fix part numberRichard Spiegel
Kahlee DIMM have invalid string when it comes to part number (bytes 0x149-0x15c). We currently force a NA string, but grunt has the proper strings. Just let the string go through, and a second commit within smbios.c will be responsible for testing the string and taking proper action. BUG=b:73122207 TEST=Build, boot and record serial output for kahlee while injecting different strings to dmi17->PartNumber. Remove string injection before committing. Change-Id: I427262873f9ec80f459245e5f509e28a68de3074 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-22soc/amd/stoneyridge: Add readable macros for GPIOJustin TerAvest
This commit defines a set of macros for defining GPIO configuration that are easier to read than the raw iomux function values used today. TEST=None BUG=b:72875858 Change-Id: Ie100c8494c565afa28fa44d78ff73155fc8c7ea8 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23828 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-21soc/amd/stoneyridge: Add functions for GPIO interruptsChris Ching
Add a function to configure interrupt settings for a GPIO. This does not currently configure GEVENT signals. The second function returns the GPIO interrupt status and clears the flag if set. BUG=b:72838769 BRANCH=none TEST=Update and test interrupt settings for GPIO_9 on grunt Change-Id: I1addd3abcb6a57d916b1c93480bacb0450abddf2 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21soc/amd/stoneyridge: Add UMA save functionMarc Jones
Save the UMA values from AGESA to use in resource allocation in ramstage. Change-Id: I2a218160649d934f615b2637ff122c36b4ba617e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23817 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-20src/soc: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
This makes the flow for GPIO initialization more closely follow that what is performed for other boards so that it's easier to read the flow (and stops relying on BS_WRITE_TABLES). BUG=b:72875858 TEST=Built and booted grunt, built gardenia. Change-Id: Ic97db96581a69798b193a6bdeb93644f6a74fc9d Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23679 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-16amd/stoneyridge: Move model_15_init.c to cpu.cMarshall Dawson
Move the remaining model_15_init.c functionality to cpu.c, making it similar to other soc implementations. Change-Id: Ic8c62b09209fcdaa50ff8ffc7773ef155f979a1b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-02-16amd/stoneyridge: Use generic fixed MTRR setupMarshall Dawson
Add the X86_AMD_FIXED_MTRRS select back to Kconfig. This got lost when stoneyridge was converted from a cpu/northbridge/southbridge implementation to soc/. Remove the setup from model_15_init.c because this is duplicated functionality. BUG=b:68019051 TEST=Boot Kahlee, check steps with HDT Change-Id: Id5526dcff12555efccab811fa3442ba1bff051bb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/amd/stoneyridge/spi: Use correct conversion specifierPaul Menzel
Use the correct conversion specifier `z` for `size_t` to fix the error below. ``` error: format '%lx' expects argument of type 'long unsigned int', but \ argument 4 has type 'size_t {aka unsigned int}' [-Werror=format=] ``` Found-by: gcc (Debian 7.3.0-3) 7.3.0 Change-Id: I05d3b6c9eec0ebf77cdb9e9928037e837f87ea03 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/23770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/amd/common/block/pi/amd_init_late.c: Transfer memory info to cbmemRichard Spiegel
SMBIOS structure type 17 is not being generated because memory info is not being stored to cbmem. This has to happen after AGESA AmdInitLate has run, but before SMBIOS is generated. There's a need to convert format between AGESA generated info, and what is required in cbmem. Create a procedure that transfers information between AGESA and cbmem, and call it from agesawrapper_post_device() after AmdLateInit is called. BUG=b:65403853 TEST=build and run kahlee, verify if SMBIOS structure type 17 is being generated, and if associated strings are what should be expected. Change-Id: I151a8f1348c9bafceb38bab1f79d3002c5f6b31b Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-15soc/amd/common/block/s3/s3_resume.c: Check mrc_cache_get_current() returnRichard Spiegel
Procedure mrc_cache_get_current() returns -1 for error, 0 for pass. Do check the return in procedure get_s3nv_info. This fixes CID 1385943 BUG=b:73333332 TEST=Build kahlee Change-Id: I0f6a58380a38d13120e997dcd966423d3c2af091 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14soc/amd/stoneyridge: Set up LAPICMarc Jones
LAPIC setup is required to set virtualwire mode for legacy interrupts. This was omitted when stoneyridge was changed to use the common mp_init. BUG=b:72351388 TEST=Verify keyboard now works in SeaBIOS Change-Id: I648d8b5b5a3744a5781446c7cb72934a071f9a72 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/23718 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12amd/stoneyridge: Add S3 support to POSTMarshall Dawson
Add/update the romstage and ramstage paths to check for S3 resume and call the appropriate AGESA functions. TEST=Suspend/Resume Kahlee with full S3 patch stack BUG=b:69614064 Change-Id: Ie6ae66f88b888fff3a800b4ed55dd1f6fed712b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-12soc/amd/common: Call AmdS3FinalRestoreMarshall Dawson
AMD support in coreboot has typically not used the AmdS3FinalRestore() Entry Point. Add a call to it immediately prior to resuming to the OS. BUG=b:69614064 TEST=Check console log for execution Change-Id: Iadc4438d8cda9766002f6edade3c7b00b23b98b4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Add S3 resume functions to wrapperMarshall Dawson
Add new functions that can execute InitRtb, InitResume, LateResume, and FinalResume. Note that the name AmdInitRtb supersedes the deprecated AmdS3Save. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: I5c6a9c1a679a1c4d3f7d1d3b41a32efd0a2c2c01 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-12soc/amd/common: Replace missing AmdReleaseStruct() callsMarshall Dawson
The AGESA spec states that "Failure to release a structure can cause undesired outcomes." Uncomment the one in AmdInitLate(). The function only dealocates the structure used for the AGESA entry point, and not the internal data used by coreboot. Release the structure in AmdInitEnv(). This appears to have been an omission years ago when duplicating agesawrapper.c for every mainboard was still common. BUG=b:70671742 TEST=Build and boot Kahlee, inspect console log Change-Id: Ib1ff94ec2acdc845c5e4b4ed7088061cfc0c55f3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22888 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-12soc/amd/common: Add S3 supporting functionsMarshall Dawson
Add functions that the wrapper will call to get and save the S3 data. The wrapper requires two types of data saved: * Non-volatile: Information that is the minimum required for bringing the DRAM controller back online. This change uses the common mrc_cache driver to manage the storage * Volatile: May be stored in DRAM; information required to complete the system restoration process. TEST=Suspend/Resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ie60162ea10f053393bc84e927dbd80c9279e6b63 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-10soc/amd/stoneyridge: Put outl arguments in correct orderMartin Roth
outl takes value then port. BUG=b:72130849 Test=None Change-Id: I010c8a4462e6e27f3d335b95305dfdb137453869 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-02-07soc/amd/common: Add generic create_struct call to wrapperMarshall Dawson
Create a generic function that reports an unsuccessful call to AmdCreateStruct(). Change-Id: I2654b4f21de5a2621086142681181a687be2c8e3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-07soc/amd/common: Improve misc. formatting in AGESA wrapperMarshall Dawson
Improve the file with: * C99 inializations for structures * reorder include files for aesthetics * remove extraneous whitespace * remove a stale comment * make variable naming consistent * make function arguments consistent This change clears up all remaining checkpatch issues with the wrapper with the exception of errors created with AMD definitions, e.g. ERROR: need consistent spacing around '*' (ctx:WxV) #32: FILE: src/soc/amd/common/block/pi/agesawrapper.c:32: void __attribute__((weak)) SetFchMidParams(FCH_INTERFACE *params) {} BUG=b:62240746 TEST=Build and boot Kahlee Change-Id: I40985e0cf50df6aa4d830937e7f6b6e7908f72fe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07amd/stoneyridge: Put stage cache into TSEGMarshall Dawson
Add a function to allow an external region to be located in TSEG. Select the option to use memory outside of cbmem. Increase the size reserved in TSEG. Change-Id: Ic1073af04475d862753136c9e14e2b2dde31fe66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06soc/amd/stoneyridge/acpi/sleepstates.asl: Fix guarded codeRichard Spiegel
Remove #if statement and replace it with if(IS_ENABLED(...)) per coreboot recommendations. BUG=b:62200858 TEST=Build kahlee. Change-Id: I268b228706a625e1415c4f24e808261c279ba41e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/23575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-02-06soc/amd/stoneyridge: Add API to initialize non-early_init i2c busesDaniel Kurtz
Provide a method for initializing i2c buses that are not marked as early_init in the device tree. These i2c buses can be enabled in a mainboard's ramstage, for example. BUG=b:69407112 TEST=Boot depthcharge w/ CLI enabled on grunt. devbeep => plays beep BRANCH=None Change-Id: I6e49b0de9116138ba102377d283e22d7b50d7dca Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/23553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-15 01:42:50 +0000