Age | Commit message (Collapse) | Author |
|
Change-Id: I2ebe072a5c887b16d2a39f029069bc8674f8eaea
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I815b013438d66eef6605dba7cfbd96b9a4aff9b2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If we are not using the UARTs or they don't have the correct GPIOs
configured we should let the mainboard disable them.
BUG=b:153001807
TEST=Dump SSDT and see UART device is disabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The option to have amdfw outside of CBFS used dd to write amdfw at a
given location overwriting anything that was there before, which may
cause the build to fail due to the FMAP header being overwritten
resulting in a not too obvious error that the image is a legacy image
without FMAP header.
Mandolin was the only board using this functionality, but I fixed the
placement of components in the flash image there, so that amdfw can just
be placed in CBFS avoiding those problems.
Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit d5f1e0f9734273f79ebd313bb6a17eda04c22c11.
Reason for revert: FSP-S is now fixed to not touch the SPI
configuration registers. Thus, coreboot does not need to reconfigure
SPI after FSP-S has run.
BUG=b:153506142
TEST=Verified that SPI configuration registers look the same before
and after FSP-S has run. em100 works fine without any additional
changes in coreboot to reconfigure SPI.
Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The PICASSO_UART Kconfig option is about using the internal MMIO UART
controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART
Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change includes uart.c in bootblock, romstage, ramstage and
verstage unconditionally because this file is handling more than just
the UART console configuration. This allows boards to take advantage
of picasso_uart_mmio_ops even if PICASSO_UART is not selected.
uart_platform_base and uart_platform_refclk mustn't be provided if
PICASSO_UART is unset, so add an #if around those functions.
BUG=b:158346697
TEST=Mandolin builds again.
Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
include <stdint.h> for 'uint32_t'.
Change-Id: I8768b7f0692ed703a060dc0406b517dc001cc25d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I9846df34fd2b6b15549fa33d3eda137544fa4219
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Because the PSP maps the MMIO addresses that are used to non-
deterministic addresses, the accesses need to be able to find
the address at runtime.
BUG=b:158124527
TEST=Build & boot with Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso, Dali, and Pollock iGPU share the same PCI device ID, but need
different video BIOSes. This checks the vendor & device IDs along with
the revision and selects the correct video BIOS to use.
Also add the second VGA BIOS for Raven2-based SoCs and change all VGA
BIOS IDs to the format including the revision number.
Since SeaBIOS still expects the CBFS file name without the revision ID,
it won't find the VBIOS any more. As a temporary workaround add the
VBIOS for the silicon it will run on as VGA_BIOS_DGPU_*.
Change-Id: I8f48ecc3fbffddd21d1f830fbee26a09ac351e1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://chromium-review.googlesource.com/2040455
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This way drivers can wait for their devices to be enabled.
I also rewrote enable_aoac_devices to take advantage of
wait_for_aoac_enabled.
BUG=b:153001807
TEST=Trembyle builds
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8e653c857e164f90439e0028e08aa9608d4eca94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If the OS sets the target device state to D3, we need to clear it so we
can reestablish register access.
BUG=b:153001807
TEST=Boot trembyle with I2C powered off and see it power back on.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If9bd1b7cfa7b8d074226c4dcdefc1a44cad8b940
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This functionality is needed in the PSP and I can't include all of
southbridge.c.
BUG=b:153001807
TEST=Made sure trembyle still compiles
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3a38c655588d7836e1bd033e958a505774de871e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42324
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The legacy UARTs are supposed to default to off according to the
documentation (PPR for AMD Family 17h Model 18h). But legacy UART Range_0
is enabled after reset. The PSP might be enabling it or the documentation
might be wrong.
Having it enabled causes problems though. We have ACPI nodes defining
MMIO UARTs, and the kernel also probes for legacy UARTs. This results in
two drivers accessing the same device, one via MMIO and one via IO. I
suspect this was the cause of the garbage serial output.
Before the change you would see the following in the console:
[ 0.741108] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
After this change, we no longer see it.
BUG=b:152079780, b:157858890
TEST=Boot trembyle and make sure serial is still working.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I9d837e449b961dbb55d1301d2107838e26b3f892
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The start and end bus number in the MCFG ACPI table is inclusive.
Therefore, the number of buses decoded needs to be subtracted by
1.
BUG=b:158874061
Change-Id: Ic773bc1e0ccaa99af45d1a53919f6480887fa37e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42329
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct a message of "Error: Can't add stage_cache 57a9e101 to imd".
ramstage is 0xffc90 and adding FSP-S (0x50000) failed. Increase the
reserved region of SMRAM to accommodate both images.
BUG=b:158704095
TEST=Boot Mandolin and check console log
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I51595d80d4779e995ec2a26e395cf95d666a309e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42314
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALIB function 1 needs to be called every time there is a change in
AC/DC state of the system. This change adds a wrapper method that can
be called by PNOT (method to notify system power state change) to
report to ALIB that system power state has changed i.e. AC <-> DC.
Additionally, this change drops the call to ALIB from _INI method
since the PWRS object might not be initialized correctly at that
point. Instead EC makes a call to PNOT when PWRS is initialized.
This wrapper also fixes the value of power state being passed into
ALIB. ALIB expects 0 = AC and 1 = DC. On the other hand, PWRS reports
1 as AC and 0 as DC. WAL1() takes care of inverting the PWRS state
before passing into ALIB.
BUG=b:157752693
TEST=Verified that WAL1() gets called on AC connect/disconnect.
Steps followed:
$ echo 1 > /sys/module/acpi/parameters/aml_debug_output
$ dmesg -w | grep ACPI
[ 76.306947] ACPI Debug: "EC: AC DISCONNECTED"
[ 76.307064] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 82.264946] ACPI Debug: "EC: GOT PD EVENT"
[ 82.539833] ACPI Debug: "EC: GOT PD EVENT"
[ 82.753721] ACPI Debug: "EC: GOT PD EVENT"
[ 82.843676] ACPI Debug: "EC: GOT PD EVENT"
[ 82.970596] ACPI Debug: "EC: AC CONNECTED"
[ 82.970659] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 83.047598] ACPI Debug: "EC: GOT PD EVENT"
[ 84.804733] ACPI Debug: "EC: GOT PD EVENT"
[ 86.317934] ACPI Debug: "EC: GOT PD EVENT"
[ 86.385920] ACPI Debug: "EC: GOT PD EVENT"
[ 86.515830] ACPI Debug: "EC: AC DISCONNECTED"
[ 86.515922] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x01"
[ 90.089062] ACPI Debug: "EC: GOT PD EVENT"
[ 90.357914] ACPI Debug: "EC: GOT PD EVENT"
[ 90.573812] ACPI Debug: "EC: GOT PD EVENT"
[ 90.662744] ACPI Debug: "EC: GOT PD EVENT"
[ 90.788706] ACPI Debug: "EC: AC CONNECTED"
[ 90.788835] ACPI Debug: "ALIB call: func 1 params 0x03 0x00 0x00"
[ 90.865675] ACPI Debug: "EC: GOT PD EVENT"
[ 92.621793] ACPI Debug: "EC: GOT PD EVENT"
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f2ade28ca35378ebf4647d8df3d2ea4d0b08096
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change updates memlayout.ld for Picasso to place all early
stages (bootblock, romstage, FSP-M, verstage) and data buffers (vboot
workbuf, APOB, preram-cbmem console, timestamp, early BSP stack) at
the bottom of DRAM starting at 32MiB. This uses static allocation for
most components by defining Kconfig variables for base and size. It
relies on the linker to complain if any of the assumptions are broken.
This also allows romstage to use linker symbols for
_early_reserved_dram and _eearly_reserved_dram to store information in
CBMEM about the early DRAM usage by coreboot before ramstage starts
execution. This allows ramstage to reserve this memory region in BIOS
tables so that S3 resume can reuse the same space without corrupting
OS memory.
BUG=b:155322763
TEST=Verified memory reported by coreboot:
Writing coreboot table at 0xcc656000
0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
1. 0000000000001000-000000000009ffff: RAM
2. 00000000000a0000-00000000000fffff: RESERVED
3. 0000000000100000-0000000001ffffff: RAM
4. 0000000002000000-000000000223ffff: RESERVED
5. 0000000002240000-00000000cc512fff: RAM
6. 00000000cc513000-00000000cc6bffff: CONFIGURATION TABLES
7. 00000000cc6c0000-00000000cc7c7fff: RAMSTAGE
8. 00000000cc7c8000-00000000cd7fffff: CONFIGURATION TABLES
9. 00000000cd800000-00000000cfffffff: RESERVED
10. 00000000f8000000-00000000fbffffff: RESERVED
11. 0000000100000000-000000042f33ffff: RAM
12. 000000042f340000-000000042fffffff: RESERVED
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I009e1ea71b5b5a8e65eba16911897b2586ccfdb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change copies src/arch/x86/memlayout.ld file to
src/soc/amd/picasso/ and sets MEMLAYOUT_LD_FILE config variable to
point to this newly added file. Unused elements from the memlayout.ld
file are dropped and path to early_dram.ld is updated to include the
one from src/arch/x86.
BUG=b:155322763
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I59bf5f93b712407ddcc9fb8a46167936c6c28a76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change reconfigures SPI speeds after FSP-S has run since
FSP-S is currently configuring the SPI frequency when it should
not. Until FSP-S behavior is fixed, this workaround needs to be
applied.
BUG=b:153506142
TEST=Verified that em100 works fine.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Id9b8330c6f82c7162ff91e8cc10160fdd8cfedab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Found-by: Coverity CID 1429769, 1429777
Change-Id: Ide188379a34c769c929bf7832fd94a7004c09a64
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The picasso_ prefix on the fsp_pcie_descriptor and fsp_ddi_descriptor
structs isn't needed, since this code is picasso-specific, so drop it.
Change-Id: Ia6a0ddb411aa64becc3c23a876f2ea43cb68e028
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42252
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Combine the Ucode binaries for 3 revisions of CPU into one
CBFS module.
This should be moved to the AMD common code later.
BUG=b:153580119
TEST=mandolin
Change-Id: Ib08a65b93c045afc97952a809670c85831c0faf7
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Picasso doesn't really make use of the common mrc_cache driver because
of the PSP/ABL requirements for APOB NV data. The APOB NV data
gets consumed by PSP/ABLs before x86 comes out of reset. Hence, we cannot
really add any metadata to this saved data or use multiple slots as
done by the default MRC cache driver
(CACHE_MRC_SETTINGS). Additionally, FSP-M requires access to this APOB
NV data which coreboot needs to pass in from different locations
depending upon boot mode:
1. Non-S3 boot: PSP/ABLs store APOB NV data in DRAM at predetermined
location which is present in BIOS directory table.
2. S3 boot: PSP/ABLs do not store APOB NV data in DRAM.
Thus, coreboot needs to set FSP-M UPD NvsBufferPtr as the DRAM
location in non-S3 boot and the address of RW_MRC_CACHE on SPI flash
in case of S3 resume.
This change enables MRC cache support in Picasso in order to meet the
above requirements.
1. NvsBufferPtr is set based on boot mode.
2. APOB NV data is not stashed to CBMEM. Instead it is written right
away to SPI flash in romstage.
BUG=b:155990176
Change-Id: I8661a4cf2d34502967e936bf22a13f6f1b88e544
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The ACP device sits behind a bridge. Despite the logs indicating
the bridge is likely hooked up, there's some unusual behavior of
writes not sticking. Aside from the speculation of what's causing
the issues the initialization of the device should occur at init()
because of these potential dependencies.
BUG=b:155882600
Change-Id: I8fa83d7d1d4f356c56971d4175a2ae6497a92fb8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42231
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also remove default mb/*/fadt.c from Makefiles.
Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Setting preferred_pm_profile under sb/ or soc/ overrides the
default determined from SYSTEM_TYPE_xx (or possibly
SMBIOS_ENCLOSURE_TYPE with followup work). This is not desireable.
With the overrides removed, AMD platforms will switch from
PM_UNSPECIFIED to PM_DESKTOP as their preferred profile.
Boards need to either select a pre-defined SYSTEM_TYPE_xx or provide
board-specific mainboard_fill_fadt() should they need to change this.
As they already select SYSTEM_TYPE_LAPTOP, following boards
will change to PM_MOBILE:
google/kahlee
hp/pavilion_m6_1035dx
lenovo/g505s
Change-Id: I45c4a495a4bf3422adae9e22a6e436adef252e77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: I0c98bf7f88c33691401ebc6b174d959dd515dd11
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41921
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This was copy-paste from fam14 configuration mechanism
using platform_cfg.h files.
Change-Id: I7fdd89a8b1fe9c7e558841e24fb832d0cffd3454
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42030
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a local variable for the ResourceTemplate in the _CRS methods
instead of the RBUF object. When using RBUF, iasl complained that the
_CRS methods need to be serialized, since objects were created in there.
Since those are only used as local variables, just use local variables
for this.
TEST=iasl stops complaining about those methods not being serialized and
Linux still boots and there aren't any related ACPI errors or warnings.
Change-Id: Ic43fcaed5a8b19dbd5634c17f34a159803ba8577
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Use x86_setup_mtrrs_with_detect_no_above_4gb() to only
solve the MTRR solution for memory up to 4GiB. This assumes
4GiB to TOM2 is marked as writeback in sys_cfg MSR.
BUG=b:155426691
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ib8358b614682f6a97278f3a60b5ada5e607965af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41898
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AGESA FSP-M implementation is now not updating MTRRs out from
under the caller. As such, remove the save/restore of MTRRs
from the FSP-M call.
BUG=b:155426691
Change-Id: I14f3b18dd373ce17957ef3857920e1c4e2901bbe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The PSP does the memory training and setting up of MSRs for
TOP_MEM and TOM2. Set caching up for all the DRAM areas:
Enable WB caching for 1MiB->TOP_MEM, 4GiB->TOM2.
Enable WC caching fro 0->1MiB except 0xa0000->0xc0000.
BUG=b:155426691
Change-Id: I83916a220ea4016d4438dd4fb5be82dec5506f80
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Explain why the flash is no longer cached.
BUG=none
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibb18f363a215d665d53a722ed76896a75d1c5608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42108
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While working on psp_verstage, I noticed that this file had a number of
unnecessary includes. Remove them.
BUG=b:158124527
TEST=Build & boot psp_verstage on trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I32188e2dda39ece9dc98d0344824d997a2e80303
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change adds device_operations for UART MMIO devices that provides
following operations:
1. uart_acpi_name: Returns ACPI name of UART device. Generation of
UART device node is not yet moved to SSDT, but will be done in
follow-up CLs.
2. scan_bus: Uses scan_static_bus to scan devices added under the UART
devices. This allows mainboard to add devices under the UART MMIO
device.
Change-Id: I18abbe88952e7006668657eb1d0c177e53e95850
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This is a standard MSR. No reason for picasso to define its own.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idcfae356d35ff08ced4b7e5ccfc132a8492a6824
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42087
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We don't use amd_setup_mtrrs, bsp_topmem or bsp_topmem2 in picasso.
BUG=b:147042464
TEST=Boot to OS on trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1941934975dfea4f189347811b003a33996c887a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Advertising SMI triggers in FADT is only valid if we exit with
SMI installed. There has been some experiments to delay SMM
installation to OS, yet there are new platforms that allow some
configuration access only to be done inside SMM.
Splitting static HAVE_SMI_HANDLER variable helps to manage cases
where SMM might be both installed and cleared prior to entering
payload.
Change-Id: Iad92c4a180524e15199633693446a087787ad3a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function set_mmio_dev_ops() in chip.c which
is used for setting the dev->ops for MMIO devices based on the
comparison of MMIO address in device tree to the pre-defined base
addresses in iomap.h.
Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of
i2c_acpi_name is restricted to i2c.c since it is not required to be
exposed out of that file.
Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
If AMD_PUBKEY_FILE contains an absolute path the resulting path is
incorrect since it contains $(top).
BUG=b:147042464
TEST=Build trembyle with absolute and relative path.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib46b1799fad5588a18411f8c32541192d699cdd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
offsets for ACPI_PM are incorrectly configured for picasso SoC.
Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for
trying to testing it on wrong address.
Fix them to correct offset with hack for GPE0_BLK.
BUG=b:147044624
TEST=build and boot on trembyle; PM Timer error is gone
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ia4508a9a087e3996ef7667280f8e2788421e5700
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I263c159fe4b7757dd5abfc0d6248e45b749df980
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:154756391
TEST=Boot trembyle and see that /dev/mmcblk1 now exists
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ica83b78a7ab081d9eac9f5e267b2904dcde0b283
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Modify the FCH ACPI devices to query the PCI IRQ mapping registers for
their current IRQ numbers.
BUG=b:139429446, b:154756391
TEST=Boot trembyle and see that I2C and UART devices are finally
functional.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8f2035f74240ead4089ff4d503dfbeb447cf8de4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
AGESA FSP provides additional ACPI tables that are required.
BUG=b:133337564, b:153675915
TEST=Boot trembyle to OS and dump ACPI tables.
ACPI: added table 2/32, length now 44
ACPI: * MCFG
ACPI: added table 3/32, length now 48
ACPI: * TPM2
TPM2 log created at 0xcc513000
ACPI: added table 4/32, length now 52
ACPI: * MADT
ACPI: added table 5/32, length now 56
current = cc635af0
Searching for AGESA FSP ACPI Tables
ACPI: * SSDT (AGESA).
ACPI: added table 6/32, length now 60
ACPI: * CRAT (AGESA).
ACPI: added table 7/32, length now 64
ACPI: * ALIB (AGESA).
ACPI: added table 8/32, length now 68
ACPI: * IVRS (AGESA).
ACPI: added table 9/32, length now 72
ACPI: * HPET
ACPI: added table 10/32, length now 76
Copying initialized VBIOS image from 0x000c0000
ACPI: * VFCT at cc63ca30
ACPI: added table 11/32, length now 80
ACPI: done.
ACPI tables: 102048 bytes.
[ 0.042326] ACPI: Early table checksum verification disabled
[ 0.048621] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.055011] ACPI: XSDT 0x00000000CC6310E0 00007C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.064506] ACPI: FACP 0x00000000CC634850 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.073998] ACPI: DSDT 0x00000000CC631280 0035CF (v02 COREv4 COREBOOT 00010001 INTL 20200110)
[ 0.083488] ACPI: FACS 0x00000000CC631240 000040
[ 0.088623] ACPI: SSDT 0x00000000CC634970 00103D (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[ 0.098114] ACPI: MCFG 0x00000000CC6359B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.107606] ACPI: TPM2 0x00000000CC6359F0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.117100] ACPI: APIC 0x00000000CC635A40 0000A6 (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.126592] ACPI: SSDT 0x00000000CC635AF0 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.136082] ACPI: CRAT 0x00000000CC636C90 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.145573] ACPI: SSDT 0x00000000CC6374A0 005419 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.155064] ACPI: IVRS 0x00000000CC63C8C0 000126 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.164556] ACPI: HPET 0x00000000CC63C9F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.174047] ACPI: VFCT 0x00000000CC63CA30 00D469 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic1e87c0f7a7c736592dd8c5c6765ef9a37ed7a40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41804
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|