summaryrefslogtreecommitdiff
path: root/src/soc/imgtec/pistachio
AgeCommit message (Collapse)Author
2019-11-20Remove imgtec/pistachio SoCJulius Werner
After removing urara no board still uses this SoC, and there are no plans to add any in the future (I'm not sure if the chip really exists tbh...). Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04arch/mips: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This allows to use a common cbmem_top implementation. Change-Id: I85efe3899607854c36d0ec594868f690eb724a7f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36421 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-01lib/cbmem_top: Add a common cbmem_top implementationArthur Heymans
This adds a common cbmem_top implementation to all coreboot target. In romstage a static variable will be used to cache the result of cbmem_top_romstage. In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable needs to be populated by the stage entry with the value passed via the calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the same implementation as will be used as in romstage. Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-27src/soc: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I9c1228d3f9e7a12fe30c48e3b1f143520fed875c Reviewed-on: https://review.coreboot.org/c/coreboot/+/36332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-09-19cpu,mb,soc: Init missing lb_serial struct fieldsJacob Garber
Initialize the input_hertz and uart_pci_addr fields of the lb_serial struct to prevent later undefined reads in lb_add_serial(). This was done for exynos5420 in commit ff94e00362 (soc/samsung/exynos5420/uart.c: Init new serial struct variables), and this patch finishes the rest. Note that not all of the drivers can have the UART PCI address configured at build time, so a follow-up patch will be needed to correct those ones. Change-Id: I733bc8185e2f2d28a9823495b53d6b09dce4deb1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1354778 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34548 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20arch/non-x86: Remove use of __PRE_RAM__Kyösti Mälkki
Change-Id: Id8918f40572497b068509b5d5a490de0435ad50b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-09arch/non-x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Also remove allwinner/a10 dummy monotonic_timer implementation. Change-Id: I9dfa9b92dc63375465e3bb87b73eeefad601c810 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-07arch/mips: Make MIPS specific options depend on ARCH_MIPSArthur Heymans
Also don't define the default as this result in spurious lines in the .config. TEST: The generated config.h remain exactly the same for all boards. Change-Id: I7f35a5a9dcbc7b25b7806056e2b8e822fa94e428 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Martin Roth <martinroth@google.com>
2019-03-22arch/mips: Fix <arch/mmio.h> prototypesKyösti Mälkki
These signatures need to be consistent across different architectures. Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-07src: Drop unused include <timestamp.h>Elyes HAOUAS
Change-Id: I7e181111cd1b837382929071a350b94c3afc1aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-07security/tpm: Fix TCPA log featurePhilipp Deppenwiese
Until now the TCPA log wasn't working correctly. * Refactor TCPA log code. * Add TCPA log dump fucntion. * Make TCPA log available in bootblock. * Fix TCPA log formatting. * Add x86 and Cavium memory for early log. Change-Id: Ic93133531b84318f48940d34bded48cbae739c44 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-04device/mmio.h: Add include file for MMIO opsKyösti Mälkki
MMIO operations are arch-agnostic so the include path should not be arch/. Change-Id: I0fd70f5aeca02e98e96b980c3aca0819f5c44b98 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
When <symbols.h> was first introduced, it only declared a handful of regions and we didn't expect that too many architectures and platforms would need to add their own later. However, our amount of platforms has greatly expanded since, and with them the need for more special memory regions. The amount of code duplication is starting to get unsightly, and platforms keep defining their own <soc/symbols.h> files that need this as well. This patch adds another macro to cut down the definition boilerplate. Unfortunately, macros cannot define other macros when they're called, so referring to region sizes as _name_size doesn't work anymore. This patch replaces the scheme with REGION_SIZE(name). Not touching the regions in the x86-specific <arch/symbols.h> yet since they don't follow the standard _region/_eregion naming scheme. They can be converted later if desired. Change-Id: I44727d77d1de75882c72a94f29bd7e2c27741dd8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/31539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
The dependencies of CONSOLE_SERIAL and DRIVERS_UART were somehow backwards. Fix that. Now, CONSOLE_SERIAL depends on DRIVERS_UART, because it's using its interface. The individual UART drivers select DRIVERS_UART, because they implement the interface and depend on the common UART code. Some guards had to be fixed (using CONSOLE_SERIAL now instead of DRIVERS_UART). Some other guards that were only about compilation of units were removed. We want to build test as much as possible, right? Change-Id: I0ea73a8909f07202b23c88db93df74cf9dc8abf9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-10-22soc/imgtech/pistachio: Convert to `board_reset()`Nico Huber
Change-Id: If8fc29c46e2cbc69f94ea8b6dc414a93d82ffb28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-08src: Use tabs for indentationElyes HAOUAS
Change-Id: I6b40aaf5af5d114bbb0cd227dfd50b0ee19eebba Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28934 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-04soc/imgtec/pistachio: Get rid of device_tElyes HAOUAS
Use of device_t has been abandoned in ramstage. Change-Id: Ia36b4ef7d66c50a044bc51f452ac8b7c7ff14323 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-23soc{broadcom,imgtec,mediatek,qualcomm}: stop using spi_xfer_two_vectorsAaron Durbin
On a second look broadcom/cygnus and imgtec/pistachio appear to support full duplex. Therefore, remove the use of spi_xfer_two_vectors(). For mediatek/mt8173 and qualcomm/ipq40xx, the driver is written in such a way that it does not support full duplex. Remove the use of spi_xfer_two_vectors() and explicitly error out when a full duplex transaction is requested. Change-Id: I8689bc9bb2b27563d25e9f165487d38881c0b059 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25742 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-21driver/uart: Introduce a way for mainboard to override the baudrateJulien Viard de Galbert
The rationale is to allow the mainboard to override the default baudrate for instance by sampling GPIOs at boot. A new configuration option is available for mainboards to select this behaviour. It will then have to define the function get_uart_baudrate to return the computed baudrate. Change-Id: I970ee788bf90b9e1a8c6ccdc5eee8029d9af0ecc Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-20src/soc: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-07spi: Remove unused/unnecessary spi_init function definitionsFurquan Shaikh
Remove spi_init definitions which: 1. Do nothing 2. Set static global variables to 0 Change-Id: If4c0cdbe2271fc7561becd87ad3b96bd45e77430 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20039 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-24soc/imgtec/pistachio: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ie4ec74fccaf25900537ccd5c146bb0a333a2754c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Get rid of max_transfer_size parameter in spi_slave structureFurquan Shaikh
max_transfer_size is a property of the SPI controller and not of the spi slave. Also, this is used only on one SoC currently. There is no need to handle this at the spi flash layer. This change moves the handling of max_transfer_size to SoC SPI driver and gets rid of the max_transfer_size parameter. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: I19a1d0a83395a58c2bc1614b24518a3220945a60 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17463 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
Allow the platform to override the input clock for the UART by implementing the routine uart_platform_refclk and setting the Kconfig value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk routine which is disabled when UART_OVERRIDE_REFCLK is selected. This works around ROMCC not supporting weak routines. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Testing is successful when CorebootPayloadPkg is able to properly initialize the serial port without using built-in values. Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/14612 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-04-21imgtec/pistachio: Fix memlayout ASSERT with new binutilsStefan Reinauer
With binutils 2.26 our memlayout ASSERT for mirrored SRAM regions gets confused due to the lack of parentheses grouping the expressions. This fixes the following issue: LINK cbfs/fallback/bootblock.debug mipsel-elf-ld.bfd: bootblock and gram_bootblock do not match! mipsel-elf-ld.bfd: romstage and kseg0_romstage do not match! Change-Id: Ib406e229b8a552d9ffc4538b55ee0269bfed62a8 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14440 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-02-22urara: Increase bootblock sizeJulius Werner
The urara bootblock is less than a kilobyte from its limit (20K). There's more than enough space available so increase it to avoid impeding changes to core code. Also add some more automated checks to better model the platform's multiple windows into the same memory region and guard against accidental overlaps by a seemingly benign change to one window. Change-Id: I2e535b56d5d1748830ea1e70fd12fd9e87009bce Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13733 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-12tegra132/pistachio: Increase romstage size in memlayout.ldJulius Werner
These SoCs have come within a kilobyte of their romstage limit, so let's expand that a little to make room for future core code contributions. (In the Tegra case just by copying the layout from Tegra210, because why not? Keeps things simple.) BRANCH=None BUG=None TEST=Ran abuild with and without --chromeos for Foster, Rush, Ryu, Smaug and Urara. Change-Id: If8c1ea81cf9827412c78d67a09d54e7a2dc044ac Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-12-31imgtec/pistachio: disable default RPU gate register valuesIonela Voinescu
The RPU Clock register defaults to on for all clocks. This is modified to OFF, and the MIPS clock control modified to ON, by default. This is because the linux kernel will manage the clocks at all times, but the RPU can only disable clocks if the WIFI module has been loaded. Change-Id: I155fb37afd585ca3436a77b97c99ca6e582cbb4f Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12773 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-31imgtec/pistachio: memlayout: update GRAM sizeIonela Voinescu
GRAM is 421056 bytes. The end of the SRAM region (GRAM plays the role of SRAM) was placed at a 4K aligned address, resulting in a size of 408KB. Change-Id: I9fa32ab818d600e7447bcac895e4b8c438f2f99d Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-31imgtec/pistachio: I2C: fix base address for I2C clock setupIonela Voinescu
The base address for the I2C dividers (DIV1 and CLOCKOUT) was erroneously set to the toplevel clock controller base address and not to the correct peripherals clock controller base address. Change-Id: I66bbc1e741bcf6251babee7ddd6376d49d7cb3d1 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12771 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-31imgtec/pistachio: identity map SOC registers regionIonela Voinescu
This region must be mapped uncached. This is necesary for an U-boot payload which will obtain all register base addresses as physical addresses from the device tree and will use them as such. Change-Id: Ib5041df7d90c6ef61b7448a18dd732afbd9489ca Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12770 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-31imgtec/pistachio: Add SOC_REGISTERS memory regionIonela Voinescu
When used with a U-boot payload it will need this region identity mapped also, so we're defining it in preparation for that functionality. Change-Id: I27cee5b58cb899433b52bd06df07b5f2105212af Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12768 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-31imgtec/pistachio: Use SYS PLL in integer modeIonela Voinescu
Use SYS PLL in integer mode by default to reduce jitter. DSMPD_MASK is defined and can be used to switch to fractional mode. Tested on pistachio bring up board. Change-Id: Ie6d2aca71c7af86b0993c804329e6d03e26ff754 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12767 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-12-29mips: add coherency argument to identity mappingIonela Voinescu
In order for a U-boot payload to work properly the soc_registers region (device registers) needs to be mapped as uncached. Therefore, add a coherency argument to the identity mapping funcion which will establish the type of mapping. Change-Id: I26fc546378acda4f4f8f4757fbc0adb03ac7db9f Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12769 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-27mainboard/google/urara: change SYS PLL to 700MHzIonela Voinescu
This requires changes the interface that sets up the system PLL to support a given reference devider value and given feedback value. Also, this requires a change in the dividers used for UART, USB, I2C setup. Change-Id: I98cf7c655dbb3e95b8fcee3c7f468122021c70b5 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12765 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-21imgtec/pistachio: DDR2, DDR3: DLL reset setIonela Voinescu
Bit 8 of the MR register is automatically set by the PHY during memory initilization but having it set in the register leads to a more clear understanding. Tested on Pistachio bring up board; DDR2 and DDR3 are initialized properly. Change-Id: Ie6953e2a96ba2961521b372d280f362ee1c52b94 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12764 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-21imgtec/pistachio: DDR2, DDR3: DQS gate earlyIonela Voinescu
Switching on DQS Gate Early and DQS Gate Extension with 500R DQS/DSQN Resistors. This setup was recommended by Synopsys. Tested on Pistachio bring up board; DDR2 and DDR3 are initialized properly. Change-Id: I6cd3888d506effe71f5d535367525af2e51f6ba3 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12763 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-21imgtec/pistachio: increase CBFS cacheIonela Voinescu
Increase CBFS cache size to allow for a bigger payload. Change-Id: I47404ba9bbe95f6610189b971504019c0a1a81f0 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-17Drop src/cpu/ indirection for MIPSStefan Reinauer
Change-Id: I406166e650e07851ab1b293450fa29da8af075d9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12724 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2015-12-17soc/imgtec/pistachio: add implementation for system resetIonela Voinescu
Implement system reset by calling the watchdog soft reset. Following the soft reset, the SoC will reset to the same logic state and therefore have the same effect as a hard (power-on) reset except for: - watchdog scratch registers will be unaffected (hard reset will clear them) - the real time clock will be unaffected BUG=none TEST=tested on Pistachio bring up board Change-Id: I1332c2249c756f6d8574fc5c407de52f88e60f08 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: https://review.coreboot.org/12755 Tested-by: build bot (Jenkins) Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 20:38:08 +0000