summaryrefslogtreecommitdiff
path: root/src/soc/intel/cannonlake/gpio.c
AgeCommit message (Collapse)Author
2019-05-20soc/intel/cannonlake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot CML. Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-26soc/intel/cannonlake: Update GPIO definitions for Virtual GPIORizwan Qureshi
Denote appropriate reserved groups as virtual GPIOs in Cannonlake LP/H SoC. Change-Id: I4da161b91f83749b0ae29b387b5c99c1c3f706d8 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-14soc/intel/cannonlake: Add GPIO group pad base for ACPIDuncan Laurie
The GPIO drivers in Windows and Linux for the Cannonlake CPU have a sparse GPIO map and do not allocate pins contiguously. Each GPIO group is allocated as 32 pads regardless of whether the hardware actually has that many in the group. It appears this originated with a bug in Windows/UEFI and was carried over to Linux in order to work with existing firmware: https://lore.kernel.org/patchwork/patch/855244/ In order to support using ACPI GPIOs it is necessary for coreboot to be compatible with this implementation. The GPIO groups that are usable by the OS are declared with a pad base which is then used to compute the number for ACPI GPIOs. BUG=b:120686247 TEST=tested with write protect GPIO on sarien board. Before this change the ACPI pin number was 220 which did not correspond to the pin number in Linux. After this change the ACPI number is 303, which maps to the correct GPIO in Linux. Now the GPIO value reported by the kernel changes when the WP pin is toggled in hardware. Change-Id: I4f1a9e118d7e48f2445ccbb62a12a22e9a832c51 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-10soc/intel/cannonlake: Fix GPIO reportingDuncan Laurie
The kernel GPIO driver only expects some GPIO communities to be exported in the _CRS and it will not work correctly if the other communities are exported. CNL-LP: GPIO communities 0, 1, 4 CNL-H: GPIO communities 0, 1, 3, 4 Additionally one of the pin offset values was incorrect in GPIO community 1 for CNL-LP. This doesn't have any specific failure mode but it was found when auditing the GPIO code. Details of the kernel expected map can be found in the linux kernel at drivers/pinctrl/intel/pinctrl-cannonlake.c BUG=b:120686247 TEST=check /sys/kernel/debug/pinctrl/INT34BB:00/pins to ensure that pins >= 198 are not reading all zeros for the pin config registers. Change-Id: Ie1a2f3b9f9f4b24a9fc57e468dee50e99753912f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-16soc/intel/common/block/gpio: Change group offset calculationBora Guvendik
Add group information for each gpio community and use it to calculate offset of a pad within its group. Original implementation assumed that the number of gpios in each group is same but that lead to a bug for cnl since numbers differ for each group. BUG=b:69616750 TEST=Need to test again on SKL,CNL,APL,GLK Change-Id: I02ab1d878bc83d32222be074bd2db5e23adaf580 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22571 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/intel/cannonlake: Add missing GPIO pin definitionsLijian Zhao
Fill the missing GPIO pin definitions, includeing community 3. Change-Id: I73b7803c73446660f5c25b1263e47bb50a955c56 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22482 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2017-09-20soc/intel/cannonlake: Add PMC pci driversLijian Zhao
Add PMC pci driver on top of PMC common code, also include pmc init code reference from skylake. Change-Id: I95895a3e26cdebd98a4e54720bd4730542707d7e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/intel/cannonlake: Correct gpio definitionLijian Zhao
The following changes have been applied for GPIO: 1. Correct port id using by GPIO community 3 for CNL-LP. 2. Correct number of doubleword for each pad from 2 to 4. Change-Id: I717d1ffba8e6722543f4cf8083fe6145fa85e184 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-18soc/intel/cannonlake: Use common GPIO driverAndrey Petrov
Change-Id: I0bbdd641244f0c7baaa2146dcfde6431bde387c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>