Age | Commit message (Collapse) | Author |
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14321
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A call to i2c_read() for a non-existent address followed by an i2c_read()
to a valid address results in a false abort status for the 2nd call.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT)
Because the abort status register is cleared on read and wait_tx_fifo()
reads it twice, the returned status does not contain the abort status.
Fixing that changed the 2nd read to reflect the abort status.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT)
Bit 0 indicates that the address was not acknowledged by any slave.
That's the abort status from the previous transaction.
So I added a read of the abort status before starting a transaction in
both i2c_read() and i2c_write().
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS)
Tested on a Bay Trail E3845 SoC.
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14160
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
i2c.c uses "*(volatile unsigned int *)" constructs where it could use
read32() and write32().
Switch to using read32() and write32().
The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed
in https://review.coreboot.org/#/c/14160/
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
(intel/fsp_baytrail: Fix I2C abort logic)
I also fixed a few minor white space issues.
Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14162
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would
result in unusable devices, as the resources were set to 0 and the devices
were disabled.
lpss.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE
and applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode
set to disable and the devicetree set to default.
Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change properly assigns resources to the LPE (Low Power Engine for
Audio) and enables ACPI mode.
lpe.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and
applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
That wipes out all previously stored settings and breaks running devices
in ACPI mode.
This more closely matches what is done in intel/baytrail.
Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs.
The 10K and 40K values map to 'reserved'.
This brings the code closer to the non-FSP baytrail.
Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/13907
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
On some devices it can happen that DisplayPort TX lanes
do not work properly if the power gate setup is omitted.
If that happens, DisplayPort training will fail and therefore
DisplayPort channel will not work. Both ports are affected.
It seems that not every CPU shows this effect
and those that are affected tend to fail more often in a cold
environment.
With this fix a board that originally shows this failure
was running for over 1000 power cycles without issues.
Change-Id: Ia266674490a1bee63a85b38d1dc949dcdf683cbc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13743
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add all needed functions to fsp_baytrail so that reg_script can
do full iosf access. To keep it simple, this patch synchronises
iosf access between baytrail and fsp_baytrail.
Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/13742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Baytrail FSP MR 005 adds two new fields:
AutoSelfRefreshEnable
APTaskTimeoutCnt
Add the device tree definitions.
Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12973
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Some trivial cleanup.
Change-Id: I866efc4939b5e036ef02d1acb7b8bb8335671914
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13427
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This just tells the OS that it can use the 16GB of address space
at the 48GB mark for PCI. This is the upper 16GB of Bay Trail's 36 bit
physical address space.
This could be hardcoded into the UMEM definition, but doing it this way
makes it more plain what it's doing, and allows for modification
to put it just above the top of upper memory, similar to what is done
with the standard PCI region above the top of low memory.
Change-Id: Id6208c3712e5d94d62a83c4ac69e8ffd0e19f4ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12791
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Baytrail has I2c Busses 0 to 6, so is supposed to error out
if the I2c driver is called with 7 or greater. Due to an off-by-one
error it could be called with bus 7.
Fixes coverity warning:
CID 1287074 (#1 of 1): Out-of-bounds read (OVERRUN)
3. overrun-local: Overrunning array base_adr of 7 4-byte elements at
element index 7 (byte offset 28) using index bus (which evaluates to 7).
Change-Id: I7caec60298cf27bd669796e0e05e4a896f92befd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12781
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Adjust the root port INT routing based on Bay Trail spec:
Document Number: 538136, Rev. 3.9
Table 241. Interrupt Generated for INT[A-D] Interrupts
INTA INTB INTC INTD
Root Port 1 INTA# INTB# INTC# INTD#
Root Port 2 INTD# INTA# INTB# INTC#
Root Port 3 INTC# INTD# INTA# INTB#
Root Port 4 INTB# INTC# INTD# INTA#
Change-Id: I22a8c0bc6ad731dfb79385d6e165f1ec0a07507d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12684
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
|
|
Change-Id: If0d0a15442738bab0e34f1b05513e7f8e8fa9afc
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12698
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is to match the layout of the non-fsp baytrail to make comparisons
easier and possibly remove duplicate files.
Change-Id: I9a94842d724ab3826de711d398227e7bdc1045ff
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12686
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The macro PCI_DEV_PIRQ_ROUTE ends with a comma and escaped newline.
Ending a macro with an escaped newline is always wrong.
The final comma is not necessary, as all uses of PCI_DEV_PIRQ_ROUTE()
properly separate calls with a comma.
I haven't investigated whether this is causing a real issue, but it should
be leaving gaps in struct baytrail_irq_route.pcidev.
The non-FSP baytrail does not have this issue.
Change-Id: If6782176068b07cb3bc819c00d1cdb1b618bcea8
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12696
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The ALIGN_CURRENT macro relied on a local variable name
as well as being defined in numerous compilation units.
Replace those instances with an acpi_align_current()
inline function.
Change-Id: Iab453f2eda1addefad8a1c37d265f917bd803202
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12707
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The BBAR register (BIOS Base Address Configuration Register) defined in
the ICH9 datasheet does not exist in the Bay Trail E3800 datasheet.
Accessing it seems harmless, but should likely be avoided.
Change-Id: I5d9a6a1ccead84c8996796f516a2bdc5f248cfef
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: Icd697053c2ea1a2ac42bdd045134d223d93d5403
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/12623
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In coreboot, bool, hex, and int type symbols are ALWAYS defined.
Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The symbol BAYTRAIL_SMM was never valid (there's no config statment
initializing the symbol), but it was being selected and used
in the code.
Now that SMM is supported in fsp_baytrail, the code it was trying
to switch can be removed, and just set up for SMM.
Change-Id: I0fd4865a951734e728500e7baf593ff7eb556f73
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12553
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Ben Gardner <gardner.ben@gmail.com>
|
|
The E3800 with ordering code FH8065301487717 is stepping D0, value 0x11.
Add that so the debug log shows 'D0' instead of '??'.
Also, add the C0 stepping decode to fsp_baytrail.
Change-Id: Ibec764fcf5d3f448e38831786a071f5ab6066d67
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: http://review.coreboot.org/12488
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These are no longer needed.
Test: Booted minnowmax.
Change-Id: Ie77040f3506464c614760bd4d30280c8113373bd
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12468
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The microcode for Bay Trail that's in the blobs repo is for the
M and D chip variants only. The fsp_baytrail directory is for
Bay Trail I chip variants, and will not boot if the M/D microcode
is used. The microcode for the I variant is supplied as part
of the Bay Trail FSP package.
Change-Id: I5493deb1626dc3cf037053e13e092f5a1143a13a
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/12334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Load microcode to APs when performing baytrail_init_cpus. The updated
fsp1_0 driver calls TempRamInit API with a dummy microcode, so FSP
will not handle the microcode load.
Change-Id: I7b7c0f43da0d149048ae5a8fd547828f42de04fd
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/12095
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Load microcode to BSP in bootblock so later on the FSP TempRamInit call
can be success. The updated fsp1_0 driver calls TempRamInit API with a
dummy microcode, so FSP will not handle the microcode load. If BSP is
not loaded a microcode before calling TempRamInit API, the call will
fail with the error No Valid Microcode Was Found.
Change-Id: I1fbe68e14e5a24d8f2da70603cd2f03675b9ca81
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/11896
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Up to now the GPIO set up macros for input sets up GPIOs to be
mapped to memory space while macros for outputs sets up GPIOs
to be mapped to legacy io space. This patch adds two additional
macros for legacy output definition and changes the old macros
to memory space mapping.
In addition, the intel/minnowmax mainboard is modified to use
the legacy macros for outputs to ensure this mainboard stays
unchanged in terms of functionality.
TEST=Booted siemens/mc_tcu3 and ensured GPIO set up in linux.
Change-Id: I99e98d31e1a59e63c58d536f2c493d6dcbfd1e75
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12340
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add two functions to set a memory mapped GPIO to a given value.
TEST=Booted siemens/mc_tcu3 board and confirmed GPIO-value after
using this functions.
Change-Id: Idc14c5d4049487e60040cc294ba0cea363d998a6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/12341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Before this fix the value of PcdEnableSdio was printed as the MIPI/ISP
configuration option.
TEST=Built and booted on Minnowboard Max
Change-Id: Ia9b02d520f4e615f90b45935456b9d97c5d00f11
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10126
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
We use UNDERSCORE_CASE. For the MTRR macros that refer to an MSR,
we also remove the _MSR suffix, as they are, by definition, MSRs.
Change-Id: Id4483a75d62cf1b478a9105ee98a8f55140ce0ef
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11761
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The EM100Pro allows the debug console to be sent over the SPI bus.
This is not yet working in romstage due to the use of static variables
in the SPI driver code. It is also not working on chipsets that have
SPI write buffers of less than 10 characters due to the 9 byte
command/header length specified by the EM100 protocol.
While this currently works only with the EM100, it seems like it would
be useful on any logic analyzer with SPI debug - just filter on command
bytes of 0x11.
Change-Id: Icd42ccd96cab0a10a4e70f4b02ecf9de8169564b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Since fsp_baytrail was refactored to use microcode.bin
in 3rdparty/blobs, we do not need MICROCODE_INCLUDE_PATH any more.
Change-Id: I4382b0c174877186bd37fbff21f3269136d15e10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/11762
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Using a copiler to compile something that's already a binary is pretty
stupid. Now that Stefan converted most microcode in blobs to a plain
binary, use the binary version.
Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11607
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of selecting the Kconfig option and adding the subdir
entry within each chipset auto include the common/firmware
directory as it's guarded by HAVE_INTEL_FIRMWARE.
BUG=chrome-os-partner:43462
BRANCH=None
TEST=Built glados.
Change-Id: I166db67c41b16c4d9f0116abce00940514539fa5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11734
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
While the romstage code flow is not consistent across all
mainboards/chipsets there is only one way of running ramstage
from romstage -- run_ramstage(). Move the
timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage().
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. TS_END_ROMSTAGE still present in
timestamp table.
Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11700
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION
structure to include these new PCD options and initialized the setting
when given in devicetree.cb.
Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/10838
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
They have been removed in the rest of the code already.
http://review.coreboot.org/#/c/4506/
Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10964
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Add the common/firmware subdir to the baytrail & fsp_baytrail
makefiles and remove the code it replaces.
- Update baytrail & fsp_baytrail Kconfigs to use the common code.
- Update the IFD Kconfig help and prompts for the TXE vs ME.
- Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail
platforms have their own defaults.
Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10647
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CAR_MIGRATION was removed in commit:
cbf5bdfe - CBMEM: Always select CAR_MIGRATION
ALT_CBFS_LOAD_PAYLOAD was removed in commit:
cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD
MARK_GRAPHICS_MEM_WRCOMB was removed in commit:
30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB.
EXTERNAL_MRC_BLOB was removed in commit:
0aede118 - Drop unused EXTERNAL_MRC_BLOB
CACHE_ROM is only in Google's codebase.
LID_SWITCH is only in Google's codebase.
DEFAULT_POST_DEVICE_LPC is only in Sage's codebase.
ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used.
HUDSON_NOT_LEGACY_FREE never existed as far as I can tell.
MAINBOARD_DO_EDID never existed as far as I can tell.
Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10616
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The CBFS size is really mainboard specific, since it really depends on
size of the chip on the mainboard, so it makes sense to have it in
the mainboard menu along with the ROM-chip size.
- Move the CBFS_SIZE definition up in src/kconfig
- Move the Mainboard Menu markers out of src/mainboard/kconfig into
src/Kconfig so CBFS_SIZE can live in the mainboard menu.
- Add a long list setting default values to do what the chipset
directories were previously defaulting the values to. This will
be trimmed down in a following patch that creates a common set of
IFD routines. (Who knew that kconfig supported line wrapping?)
- Update the help text.
Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10610
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9599
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9598
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
`device_t device` is missing as argument. Every device_op function
should have a `device_t device` argument.
Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9597
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use of scan_static_bus() and tree traversals is somewhat convoluted.
Start cleaning this up by assigning each path type with separate
static scan_bus() function.
For ME, SMBus and LPC paths a bus cannot expose bridges, as those would
add to the number of encountered PCI buses.
Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG
Remove some newly dead code while on it.
Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10355
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7367
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|