Age | Commit message (Collapse) | Author |
|
This patch perform resource mapping for PCI,
fixed MMIO, DRAM and IMR's based on inputs given by SoC.
TEST=Ensure PCI root bridge 0:0:0 memory resource allocation
remains same between previous implementation and current
implementation.
Change-Id: I93567a79b2d12dd5d6363957e55ce2cb86ff83a7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch currently contains the following -
1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code.
2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library.
3. Use common FAST_SPI header file.
Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/19055
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Utilize the postcar stage for tearing down CAR and initializing
the MTRRs once ram is up. This flow is consistent with apollolake
and allows CAR_GLOBAL variables to be directly accessed and no
need for migrating CAR_GLOBAL variables as romstage doesn't
run with and without CAR being available.
Change-Id: I76de447710ae1d405886eb9420dc4064aa26eccc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19335
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Create sample model for common car init and teardown programming.
TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED
and CAR_NEM configs till post code 0x2a.
Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18381
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add configs for enabling Intel TraceHub and DCI for aid in debugging.
Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18791
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB
and save it in CBMEM.
BUG=chrome-os-partner:61729
BRANCH=none
TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in
SMBIOS Table from Kernel command "dmidecode".
Change-Id: I593d4ccb0d4866e99913a73c49b2f000b51827d1
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/18275
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Prmrr configuration is supported by Kabylake FSP-M with UPD provided.
It is required as one of the SGX initialization steps in BIOS.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set
size and boot.
Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3
Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: https://review.coreboot.org/18361
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently car_stage_entry is defined only in romstage_after_verstage and
as a result when SEPARATE_VERSTAGE is not selected, there is no
entry point into romstage and romstage will not be started at all.
The solution is move out romstage_after_verstage.S from fsp1.1 driver
to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the
build and boot issue with this change.
Besides that, rename the romstage_after_verstage to romstage_c_entry
in more appropriate naming convention after this fix.
Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0),
romstage can be started successfully.
Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/17976
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Cosmetic changes to rename car_stage.S to car_stage_fsp20.S,
so that it is associated with FSP driver version that is being used.
Tested on Kabylake Rvp11.
Change-Id: I869df6eb746e3982e5912c272255eab6cb008838
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/18083
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Define controller for fast SPI.
2. Separate out functions that are specific to SPI and flash
controller in different files.
BUG=chrome-os-partner:59832
BRANCh=None
TEST=Compiles successfully for chell and eve.
Change-Id: I2fe0ef937297297339d4ea19dc37d3061caaa80c
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17933
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Separate mma code for fsp1.1 and fsp2.0
and restructuring the code
- common code is placed in mma.c and mma.h
- mma_fsp<ver>.h and fsp<ver>/mma_core.c contains
fsp version specific code.
- whole MMA feature is guarded by CONFIG_MMA flag.
Change-Id: I12c9a1122ea7a52f050b852738fb95d03ce44800
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/17496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BootLoaderTolumSize FSP-M UPD is already initialized with cbmem_overhead_size()
inside driver/fsp2_0/memory_init.c, hence remove the duplicate assignment.
Change-Id: I0b1d9769cd2a863bf0547ce5f44928cacc5a63b6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/17721
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In bootblock, cpu flex ratio is set to non-turbo max.
In FSP UPD, if CpuRatioOverride is zero, then it tries to program cpu
ratio to zero. Since it is different than the non-zero value programmed
in bootblock, FSP gives reset.
To avoid the reset, set FSP UPD for CPU flex ratio override to that
value as set in bootblock.
Change-Id: I8cae5530ec97cedfbd71771f291db6f55a9fd5c2
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/17555
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ibad1ad6bb9eedf2805981623e835db071d54c528
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/17497
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Populate SoC related Memory initialization params.
Post memory init, set DISB, setup stack and MTRRs using the postcar
funtions provided in postcar_loader.c.
TEST=Build and boot kunimitsu, dram initialization done.
ramstage is loaded.
Change-Id: I8d943e29b6e118986189166d92c7891ab6642193
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16315
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Initial pieces of code to support fsp2.0 in skylake keeping
the fsp1.1 flow intact.
The soc/romstage.h and soc/ramstage.h have a reference to
fsp driver includes, so split these header files for
each version of FSP driver.
Add the below files,
car_stage.S:
Add romstage entry point (car_stage_entry).
This calls into romstage_fsp20.c and aslo handles
the car teardown.
romstage_fsp20.c:
Call fsp_memory_init() and also has the callback
for filling memory init parameters.
Also add monotonic_timer.c to verstage.
With this patchset and relevant change in kunimitsu mainboard,
we are able to boot to romstage.
TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1
Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0
Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16267
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
DCACHE_RAM_SIZE_TOTAL is set to 0x40000 and is being used to
set up CAR. Whereas DCACHE_RAM_SIZE which is set to 0x10000
is used to calculate the _car_region_end in car.ld. If the FSP CAR
requirement is greater than or even close to DCACHE_RAM_SIZE then,
the CAR region for FSP will be determined to be below the overall
CAR region boundary i.e, out of CAR memory range.
This is working with FSP 1.1 because we provide the FspCarSize
and FspCarBase explicitly in a UPD. Hence, FSP is still able to
use the upper region of CAR memory for its purpose.
However, it will be a problem in case of FSP2.0 where FSP usable CAR
is calculated using _car_region_end.
So, Remove the the use of DCACHE_RAM_SIZE_TOTAL and set
DCACHE_RAM_SIZE to correct value i.e, 0x40000(256KB)
Change-Id: Ie2cb8bb0705a37edb3414850d7659f8a3dd6958b
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16236
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
There is a lot of code that is being referred to in bootblock but
resides under skylake/romstage folder. Hence move this code
into skylake/bootblock, and update the relevant header files
and Makefiles.
TEST=Build and Boot kunimitsu.
Change-Id: If94e16fe54ccb7ced9c6b480a661609bdd2dfa41
Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com>
Reviewed-on: https://review.coreboot.org/16225
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Prepare Skylake for FSP2.0 support.
We do not use FSP-T in FSP2.0 driver, hence guard the
FspTempRamInit call under a switch.
In addition to the current early PCH configuration
program few more register, so all in all we do the following,
* Program and enable ACPI Base.
* Program and enable PWRM Base.
* Program TCO Base.
* Program Interrupt configuration registers.
* Program LPC IO decode range.
* Program SMBUS Base address and enable it.
* Enable upper 128 bytes of CMOS.
And split the above programming into into smaller functions.
Also, as part of bootblock_pch_early_init we enable decoding
for HPET range. This is needed for FspMemoryInit to store and
retrieve a global data pointer.
And also move P2SB related definitions to a new header file.
TEST=Build and boot Kunimitsu
Change-Id: Ia201e03b745836ebb43b8d7cfc77550105c71d16
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16113
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Program MCHBAR, DMIBAR, EPBAR, EDRAMBAR and GDXCBAR.
Also program the PAM registers. The system agent was being
programmed in romstage during pre-console initialization, after
moving to C_ENVIRONMENT bootblock this was missing, restoring
the same.
TEST=Build and Boot Kunimitsu
Change-Id: Iaf310cfb83e58eb8d5affb481dfc343f5d45961b
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16224
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The function name "pmc_tco_regs" is changed to "smbus_tco_regs"
since TCO offsets belongs to SMBUS PCI device.
BUG=none
BRANCH=none
TEST=Built and booted kunimitsu
Change-Id: I4ac26df81a8221329f2b45053dd5243cd02f8ad7
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16155
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Here is the list of items of code cleanup
1. Define TCO registers in smbus.h and not in pmc.h (as per EDS).
2. Include smbus.h wherever these TCO register defines were used.
3. Remove duplication of define in gpio_defs.h.
4. Remove unnecessary console.h include from memmap.h as no prints done.
5. Remove unnecessary comment from pch.c.
BUG=none
BRANCH=none
TEST=Built and boot kunimitsu.
Change-Id: Ibe6d2537ddde3c1c7f8ea5ada1bfaa9be79c0e3b
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16027
Tested-by: build bot (Jenkins)
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Adding kabylake device ids for chip inits.
Skylake and Kabylak do not differ much, the intention
is to support both SoCs in the same code base.
Change-Id: I9ff4c6ca08fe681798001ce81cca2c085ce32325
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16049
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn
returns an int (with -1 for "error"), so use int for devfn.
Change-Id: I7d1cdb6af4140f7dc322141c0c018d8418627434
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan #1357450, #1357449
Reviewed-on: https://review.coreboot.org/15964
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
List of activity performing in this patch
- early PCH programming
- early SA programming
- early CPU programming
- mainborad early gpio programming for UART and SPI
- car setup
- move chipset programming from verstage to post console
BUG=chrome-os-partner:55357
BRANCH=none
TEST=Built and booted kunimitsu till POST code 0x34
Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15785
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Transition to using the common Intel ACPI hardware definitions
generic ACPI definitions.
BUG=chrome-os-partner:54977
Change-Id: I5f2aa424a167092b570fda020cddce5ef906860a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15671
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
|
|
Have the Skylake SOC generate ACPI timing values for the enabled I2C
controllers instead of passing it in the DSDT with static timings.
The timing values are generated from the controller clock speed and
are more accurate than the hardcoded values that were in the ASL which
were originally copied from Broadwell where the controller is running
at a different clock speed...
Additionally it is now possible for a board to override the values
using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then
the kernel will generate its own timing using the same forumla, but if
the SDA hold time value is zero the kernel will NOT generate a correct
value and the SDA hold time may be incorrect.
This was tested on the Chell platform to ensure all the I2C devices on
the board are still operational with these new timing values.
Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Support the common Intel LPSS I2C driver for the 6 I2C bus controllers
that are present on the Skylake-LP PCH with a 120 mHz clock. The
required lpss_i2c_base_address() method is implemented separately for
verstage/romstage and ramstage environments.
This provides methods to convert to and from "struct device" and the
I2C controller bus number for that device. These are used to provide
support for the "I2C Bus Operations" that are present in the coreboot
devicetree.
To support the I2C controller before ramstage an early init function
is provided to do minimal initializaiton of the PCI device and assign
a temporary base address for use before memory. The final base
address is assigned during device enumeration and used during ramstage.
Because it is usually not necessary to enable I2C controllers before
ramstage a config register for the devicetree is provided to perform
early initialization of this controller. In addition the bus speed
can be set in the devicetree and that speed will be applied when the
device is initialized. If not provided the default speed is set to
I2C_SPEED_FAST.
This was tested with the google/chell mainboard by reading and writing
from the trackpad and codec devices during both verstage and ramstage.
Change-Id: Ia0270adfaf2843a3be4e00c732c85401a3401ef5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15105
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The FBC hardware for skylake does not have access to the bios_reserved
range so it always assumes 8MB is used and so the kernel will
therefore need to avoid using the last 8MB of the stolen window.
With the default stolen size of 32MB(-8MB) there is not enough space
for FBC to work with a high resolution panel.
Kernel reference:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a9da512b3ed73045253afd778e40d4298f42905b
BUG=chrome-os-partner:50396
BRANCH=glados
TEST=build and boot on chell DVT
Change-Id: I3049d7d9e7c551aad5b8fd1630d5fbd88ccb2692
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: fff1f4b35e23e77cdc72c5bcc290f199494cdbbb
Original-Change-Id: If468cca5759a320f3cd2d7eb09f4bcc0117b24cb
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328813
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The PCH does not set PM1_STS[WAK_STS] bit when waking from a
G3 state, which is triggered by hibernate now on chell when we
do a PMIC shutdown. This means the checks for S5 wake are not
done and instead it is logged as a wake from S0.
BUG=chrome-os-partner:50076
BRANCH=glados
TEST=pass firmware_EventLog test on chell
Change-Id: I3ca05a4824df3401150a63d4b6555f759de40087
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de6c9bac447edd06568193f990f1f4e278576783
Original-Change-Id: I4472498468d620fe69f2b68710e818a4ad287382
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/326888
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13696
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to not reboot loop in the face of failed vboot verification
on resume set the PM1 control register to indicate S5. After the
subsequent cold reset the PM1 control register will indicate S5
as it should.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=On chell injected failed vboot verification. Ensured a reboot
loop doesn't ensue.
Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c
Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323504
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13579
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To allow skylake platforms to run with verified memory init
code the chipset needs to implement vboot_platform_is_resuming()
so that the vboot code can make proper decisions.
BUG=chrome-os-partner:46049
BRANCH=glados
TEST=Suspended and resumed on chell. Also, tested with an EC build
which returns a bad hash to ensure that is properly caught.
Change-Id: I508a339c07dcc9e7c56a0df4201660827b3ae07a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3e11789339bcd8fc8fc99b704c6a1110acf5302
Original-Change-Id: I40264019eb28e85795258112c720056a6a3fc523
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/323503
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/13578
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now coreboot should do BIOS CAR setup along with NEM
mode setup.
This patch also provides a mechanism to use 16MB code caching
benefit although LLC still limited to 1M/1.5M based
on SOC LLC limit.
Here with unlimited cache line gets replaced. Now we could use
unlimited cache size along with well defined data size
[pg: updated to current upstream #defines]
BUG=chrome-os-partner:48412
BRANCH=glados
TEST=Builds and Boots on FAB4 SKU2/3.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Change-Id: I96a9cf3a6e41cae9619c683dca28ad31dcaa2536
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ec51f15c874ad2f1f4fad52fa8deced7b27a24b
Original-Change-Id: Id62c15799d98bc27b5e558adfa7c7b3468aa153a
Original-Reviewed-on: https://chromium-review.googlesource.com/320855
Original-Commit-Ready: Subrata Banik <subrata.banik@intel.com>
Original-Tested-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13138
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch disables the SaGv feature in recovery mode. Since the memory
training happens at both low and high frequency points when SaGv is
enabled, recovery mode boot time increases by 5 seconds. To reduce this
5 second increase, the SaGv feature is disabled in recovery mode.
The value "0" here means SaGv disable.
Following is the table for same.
0=Disabled (SaGv disabled)
1=FixedLow (Fixed to low frequency)
2=FixedHigh (Fixed to High frequency)
3=Enabled (SaGv Enabled. Dynamically changes)
BRANCH=None
BUG=chrome-os-partner:48534
TEST=Built for kunimitsu.
Results show recovery mode boot time
is not affected (not increased).
Change-Id: I77412a73a183a5dbecf5564a22acc6e63865123e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dc586079052acf9af573b68dff910386cd43484d
Original-Change-Id: Ice3e1a630e119d40d3df52e3a53ca984e999ab0b
Original-Signed-off-by: haridhar <haridhar.kalvala@intel.com>
Original-Signed-off-by: Somayaji, Vishwanath <vishwanath.somayaji@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/315759
Original-Commit-Ready: Haridhar Kalvala <haridhar.kalvala@intel.com>
Original-Tested-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-on: https://review.coreboot.org/12998
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is a UPD setting exposed by FSP that allows the DDR
frequency to be limited. Expose this for devicetree.
BUG=chrome-os-partner:47346
BRANCH=none
TEST=tested by limiting DDR frequency to 1600 on chell EVT
Change-Id: I1f17b221d9fa4c2dd1e8c5f403deb0f2bc0493a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 91f760ad19823225f7e5bd2dc690164ed253e220
Original-Change-Id: Ibcd4a65a9cfd7d32fbf2ba8843ab25da8e9cf28a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/317243
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12981
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Some MemoryInit UPD parameters have been moved to
SiliconInit in FSP 1.8.0. This patch has the respective
changes in coreboot for this.
BRANCH=none
BUG=none
TEST=Build and booted in kunimitsu
CQ-DEPEND=CL:*237423, CL:*237424
Change-Id: Ic008d22f96fb5f14965e5b5db15e05fb39dd52d3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 573c1d8325cd504213528030ecf99559402b5118
Original-Change-Id: I71b893aa7788519ed2ef15f3247945ffcbbbcf4d
Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/310191
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/12940
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Rename soc_display_upd_value to fsp_display_upd_value since the routine
was moved from src/soc/intel/common into src/drivers/intel/fsp1_1.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ifadf9dcdf8c81f8de961e074226c349fb9634792
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 95238782702999a178989467694ac1f15c079615
Original-Change-Id: Ibd26ea41bd5c7a54ecd3c237f7fb7bad6dbf7d8a
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/306351
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12157
Tested-by: build bot (Jenkins)
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
|
|
In FSP 1.7.0 SataMode and SataEnable have been moved from
MemoryInit to SiliconInit. Also, GpioTablePtr has been removed.
USB phy settings added to SiliconInit, Enable the configs for USB
equalization settings in coreboot.
Addition of serialIO UPD to indicate FSP not to reinitialise
UART2 controller during MemoryInit.
BRANCH=none BUG=chrome-os-partner:45684, chrome-os-partner:42284, chrome-os-partner:41374
TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC,
USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume
CQ-DEPEND=CL:*232947, CL:*232946, CL:*232948, CL:*232949
Change-Id: I2e8e6e32fc7074774ddcf1fb4c270bb56372b7df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 623c5a52f3afedaf2c0bfe7361cfd627d093cb73
Original-Change-Id: I8b3be2c49893c564fe2197aa32bde6323bf425e9
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303661
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/12144
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The right files just need to be added to the verstage
build. Do that so a stand alone verstage builds and
links.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Change-Id: I2d0c98760494e2f4657ee35b6f155690939d2d18
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11827
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to introduce a verstage which performs vboot
verification the cache-as-ram environment needs to be
generalized and split into pieces that can be utilized
in romstage and/or verstage. Therefore, the romstage
pieces were removed from the cache-as-ram specific pieces
that are generic:
- Add fsp/car.h to house the declarations for functions in
the cache-as-ram environment
- Only have cache_as_ram_params which are isolated form the
cache-as-ram environment aside from FSP_INFO_HEADER.
- Hardware requirements for console initialization is done
in the cache-as-ram specific files.
- Provide after_raminit.S which can be included from a
romstage separated from cache-as-ram as well as one that
is tightly coupled to the cache-as-ram environment.
- Update the fallout from the API changes in
soc/intel/{braswell,common,skylake}.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I2fb93dfebd7d9213365a8b0e811854fde80c973a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/302481
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id93089b7c699dd6d83fed8831a7e275410f05afe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11816
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The report_platform_info() and set_max_freq() are not being
used similarly on skylake and braswell. With the addition
of other SoCs I suspect a similar pattern will emerge. Instead
of having weak functions to ensure things link with the hardcoded
policy push these calls into their respective SoC homes.
For parity, both skylake and braswell were updated to be consistent
with the same calls prior to this patch.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=Built and booted glados. Built braswell.
Original-Change-Id: I3371d09aff0629503254296955fef28d35754a38
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/303334
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2de33632ed127cac52d7075cbad95cd6387a1b46
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11815
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Eliminate unused parameters from the console initialization.
BRANCH=none
BUG=chrome-os-partner:44827
TEST=Build and run on kunimitsu
Original-Change-Id: Iacacea292d43615e9d2f8e5d3ec67e77f3f08906
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/301204
Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Change-Id: I3a0ea948ce106b07cb6aa872375ce588317dc437
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11814
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This removes the dependency on chromeos and vboot for the sw write protect state
function: vboot_get_sw_write_protect, renamed to get_sw_write_protect_state to
both reflect this change and become consistent with the definition of
get_write_protect_state that is already in use.
Change-Id: I47ce31530a03f6749e0f370e5d868466318b3bb6
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: http://review.coreboot.org/11496
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set DISB inside romstage right after successful mrc init such that
any reset events afterwards can take fast boot path and in turn
achieve better boot performance
BRANCH=NONE
BUG=chrome-os-partner:43637
TEST=Built for kunimitsu and tested DISB is set correctly and fast
boot path is taken.
Change-Id: I230ff76287f90c5d3655a77bbaca666af37c4aae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7bdc6900012c99187bb90904df18c2b3f9e52c61
Original-Change-Id: Ie08b4a4f29a7c5cb47e508bc59a5e95f8e36fa00
Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295509
Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11550
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove dead code not called by any part of coreboot.
BRANCH=none
BUG=None
TEST=Build and run on skylake
Change-Id: I3d457a196d12d03340bceb444d1d6c95afef13df
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58ea135813afeef773f37023fda58f36d544beef
Original-Change-Id: Id8f4591f20d41f875348c6583618bbcaaf9d9a3a
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294953
Original-Commit-Ready: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11544
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
I missed this in code review. This should be under the soc
directory.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built glados.
Change-Id: Ia018c20f97f267b8f7592b2459d10eafe5ec7159
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c081ed6de46605b7d0a72962ac2a041c470b12c
Original-Change-Id: Ic3938fe5d71bd24a395304cfabe40eff48bc4a40
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295239
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11542
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|