summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake
AgeCommit message (Collapse)Author
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-16soc/intel/skylake: Add option to enable/disable EISTSubrata Banik
Set MSR 0x1A0 bit[16] based on EIST config option. Default Hardware Managed P-state (HWP) also known as Intel Speed Shift is enabled on SKL hence disable EIST and ACPI P-state table. Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-16soc/intel/skylake: Configure C-state interrupt response timeSubrata Banik
Program C3/C7/C10 interrupt response time for all cores. Change-Id: I4f47502e1c212118d7cc89d4de60a1854072964a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-09soc/intel/skylake: Use common/blocks/uart codeAamir Bohra
Change-Id: I53ed687dc49524e001889f091825b2cc530546a3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19492 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-09soc/intel/skylake: Use intel/common/block/smbus codeAamir Bohra
Change-Id: I2ca32ab594552424e4f1358302641f159a3d7e62 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/skylake: Enable MTRR checkFurquan Shaikh
Change a4b11e5c90 (soc/intel/skylake: Perform CPU MP Init before FSP-S Init) dropped mtrr_check while re-organizing code. Add the check back after MTRR setup is performed. BUG=b:36656098 TEST=Verified that MTRR check is done after setup on poppy. Change-Id: I440405c58c470ffa338be386d84870635530a031 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/skylake: Enable PARALLEL_MP_AP_WORKFurquan Shaikh
With change a4b11e5c90 (soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, MTRR programming was moved to be performed after CPU init is done. However, in order to allow callbacks after MP init, PARALLEL_MP_AP_WORK needs to be enabled. Since this option was not selected, MTRR programming always failed in ramstage for Skylake / Kaby Lake mainboards. BUG=b:36656098 TEST=Verified 2500+ cycles of suspend resume on poppy. Change-Id: I22a8f6ac90ba35075ff97dd57bab66c129f3e771 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-08soc/intel/skylake: remove unused SMI functionsAaron Durbin
The southbridge_trigger_smi() and southbridge_clear_smi_status() functions are unused. Remove them. Change-Id: I86994191a63cbf515bc330433ef7c3f79a39936e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-05soc/intel/common: Provide common block fast_spi_flash_ctrlrFurquan Shaikh
Now that we have a common block driver for fast spi flash controller, provide spi_ctrlr structure that can be used by different platforms for defining the bus-ctrlr mapping. Only cs 0 is considered valid. Change-Id: I7228ae885018d1e23e6e80dd8ce227b0d99d84a6 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19575 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-05soc/intel/skylake: Enable SATA portsShelley Chen
The current implementation is incorrect and is actually disabling the ports. Fixes that. BUG=b:37486021, b:35775024 BRANCH=None TEST=reboot and ensure that we can boot from SATA SSD. Change-Id: I8525f6f5ddfdf61c564febd86b1ba2e01c22d9e5 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19553 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-04soc/intel/skylake: Remove unused skylake_i2c_config structureFurquan Shaikh
Remove struct skylake_i2c_config from chip.h since it is not used anymore. Change-Id: Icde4b7af5b9c31020099c1a6372a6867827f61ae Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-05-04intel/skylake: nhlt: Add 48Khz 2ch 16bit config for max98927Duncan Laurie
This changelist adds the 48Khz 2ch 16bit NHLT configuration for the Maxim 98927 speaker amplifier codec. BUG=b:35585307 TEST=manual testing to ensure speaker output is functional on Eve board Change-Id: Ieda988b557ecefdace5f81b474a952af56e69315 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19548 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-02soc/intel/skylake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19055 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Set xtal bypass on low power idleNaresh G Solanki
When using Wake On Voice &/or DCI, it requires xtal to be active during low power idle. With xtal being active in S0ix state power impact is 1-2 mW. Hence set xtal bypass bit in CIR31C for low power idle entry. TEST= Build with s0ix enable for Poppy. Boot to OS & verify that bit 22 of CIR31C register is set. s0ix works. Change-Id: Ide2d01536f652cd1b0ac32eede89ec410c5101cf Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19442 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-01soc/intel/skylake: Add ID for Fizz i7Shelley Chen
Bug=b:35775024 BRANCH=None TEST=boot up successfully to kernel on Fizz i7 sku Change-Id: Iccf9fbef1333f3fea78091b679c2676411559987 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19486 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/skylake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Ibe65a92f1604277bec229c67f4375b6636c0972d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19244 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28intel/skylake: Switch FADT to ACPI version 3.0Werner Zeh
On Apollo Lake it was discovered that our current FADT implementation is valid for ACPI version 3.0 but misses fields for ACPI version 5.0. We run into booting issues with Windows 10 using version 5 in the FADT header. In commit 2b8552f49bc3a7d0290f96a84b573669de396011 (intel/apollolake: Switch FADT to ACPI version 3.0) we go back to version 3 for Apollo Lake. Skylake is now the last platform that uses version 5 in FADT header. Change-Id: I2d0367fae5321dee4ccac417b7f99466f8973577 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-25soc/intel: Unify `timestamp.inc`Paul Menzel
These files are actually indentical, but unfortunately, the formatting was changed without caring for the already present files. Fix that. Use the license formatting where less lines are used. The next step is to put that in a common location. Change-Id: Iecb263b9d321a33e64988b315220893df2e0045c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19423 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-25soc/intel/skylake: Fix the PCI ID for SATA controllerFurquan Shaikh
Update the PCI ID for SATA controller on Kaby Lake. Change-Id: Id0b5e0366e04fbac6a57a15407f33f390a2a1856 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19395 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-25soc/intel/skylake: use postcar stage for fsp 2.0Aaron Durbin
Utilize the postcar stage for tearing down CAR and initializing the MTRRs once ram is up. This flow is consistent with apollolake and allows CAR_GLOBAL variables to be directly accessed and no need for migrating CAR_GLOBAL variables as romstage doesn't run with and without CAR being available. Change-Id: I76de447710ae1d405886eb9420dc4064aa26eccc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19335 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-24soc/intel/skylake: Add ID's for Kabylake-RNaresh G Solanki
Add CPUID, IGD, MCH & LPC ID of Kabylake-R. Change-Id: I5ee7b3a2616f71137bba83c071288dbda2acde3d Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19218 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-19soc/intel/skylake: Add ASL entries for IMGU and CIO2 devicesSowmya
Add ASL entries for IMGU and CIO2 devices * _CCA ACPI object to report that there is no Cache Coherent DMA support. * CAMD ACPI object to specify the device type. These ACPI objects are used by Intel kernel drivers. BUG=b:36580624 BRANCH=none TEST=Build and boot poppy. Dump and verify that DSDT table has the entries for IMGU and CIO2 devices. Change-Id: I13050253e18408cdb1e196f8003b3f43299aa5a5 Signed-off-by: Sowmya V <v.sowmya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18968 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-13soc/intel/skylake: Split AC/DC settings for Deep Sx configDuncan Laurie
Currently when enabling Deep S3 or Deep S5 it unconditionally gets enabled in both DC and AC states. However since using Deep S3 disables some expected features like wake-on-USB it is not always desired to enable the same state in both modes. To address this split the setting and add a separate config for Deep Sx in AC and DC states. All motherboards that set this config were updated, but there is no actual change in behavior in this commit. BUG=b:36723679 BRANCH=none TEST=This commit has no runtime visible changes, I verified on Eve that the Deep SX config registers are unchanged, and it compiles for all affected boards. Change-Id: I590f145847785b5a7687f235304e988888fcea8a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19239 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-11soc/intel/skylake: Use intel/common/uart driverAamir Bohra
Change-Id: Id132df15ae5a6aef75d6434df18fc71d8d28c3ca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19003 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-11soc/intel/skylake: Use LPSS common libraryAamir Bohra
Use lpss common library to program reset and clock register for lpss modules. Change-Id: I198feba7c6f6d033ab77ed25a5bd9ea99411a1e4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19153 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/skylake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: Ibcbaf5061e96a67815116a9f7a03be515997be6d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/skylake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-07soc/intel/skylake: Enable XHCI clock gate control in ACPINaresh G Solanki
Enable SS link trunk clock gating & D3hot when device enters D3 state. Similarly disable SS link trunk clock gating & D3hot when device enters D0 state TEST=Build & boot Poppy board. Check working for XHCI wake when DUT is in S3. Change-Id: Ida2afa2e5f9404c0c15d7027480a28a003ad9a40 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/18879 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-06soc/intel/skylake: Add support for GSPI controllerFurquan Shaikh
Sky Lake PCH contains two GSPI controllers. Using the common GSPI controller driver implementation for Intel PCH, add support for GSPI controller buses on Sky Lake/Kaby Lake. BUG=b:35583330 Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-05soc/intel/lpss: Provide common LPSS clock configFurquan Shaikh
Since there are multiple controllers in the LPSS and all use the same frequency, provide a single Kconfig option for LPSS_CLOCK_MHZ. BUG=b:35583330 Change-Id: I3c0cb62d56916e6e5f671fb5f40210f4cb33316f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19115 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-05soc/intel/skylake: Add tsc_freq.c to verstageFurquan Shaikh
This is required to provide tsc freq required by timer library. BUG=b:35583330 TEST=Verified that delay(5) in verstage adds a delay of 5 seconds. Change-Id: I03edebe394522516b46125fae1a17e9a06fd5f45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19094 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
The virtualized developer switch was invented five years ago and has been used on every vboot system ever since. We shouldn't need to specify it again and again for every new board. This patch flips the Kconfig logic around and replaces CONFIG_VIRTUAL_DEV_SWITCH with CONFIG_PHYSICAL_DEV_SWITCH, so that only a few ancient boards need to set it and it fits better with CONFIG_PHYSICAL_REC_SWITCH. (Also set the latter for Lumpy which seems to have been omitted incorrectly, and hide it from menuconfig since it's a hardware parameter that shouldn't be configurable.) Since almost all our developer switches are virtual, it doesn't make sense for every board to pass a non-existent or non-functional developer mode switch in the coreboot tables, so let's get rid of that. It's also dangerously confusing for many boards to define a get_developer_mode() function that reads an actual pin (often from a debug header) which will not be honored by coreboot because CONFIG_PHYSICAL_DEV_SWITCH isn't set. Therefore, this patch removes all those non-functional instances of that function. In the future, either the board has a physical dev switch and must define it, or it doesn't and must not. In a similar sense (and since I'm touching so many board configs anyway), it's annoying that we have to keep selecting EC_SOFTWARE_SYNC. Instead, it should just be assumed by default whenever a Chrome EC is present in the system. This way, it can also still be overridden by menuconfig. CQ-DEPEND=CL:459701 Change-Id: If9cbaa7df530580a97f00ef238e3d9a8a86a4a7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18980 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/intel/skylake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I0fa0a60f680b9b00b7f26f1875c553612b123a8e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18566 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/pci_devs.h: Use consistent naming in soc/pci_devs.hSubrata Banik
This patch to make common PCI device name between APL and SKL. Change-Id: I5e4c7502e9678c0a367e9c7a96cf848d5b24f68e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/common/block: Add cache as ram init and teardown codeSubrata Banik
Create sample model for common car init and teardown programming. TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED and CAR_NEM configs till post code 0x2a. Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-24soc/intel/skylake: Use C entry code for MTRR programmingSubrata Banik
Make skylake cache as ram SPI mapped MTRR programming align with apollolake code. Change-Id: I87a5c655da8ff5f6d8ef86907b7ae2263239b1ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18923 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-23soc/intel/skylake: Add SGX initializationRobbie Zhang
This patch implements SGX initialization steps in coreboot per Intel SGX BWG rev 2.0.8 for Kaby Lake SoC. If enabled on a Kabylake device, SoC capability and PRM (processor reserved memory) of desired size (needs to be configured through PrmrrSize) are provisioned for later software stack to use SGX (i.e., run SGX enclaves). One issue is still puzzling and needs to be addressed: by calling configure_sgx() in cpu_core_init() which is the per-thread function, SGX is always failing for thread 0 but is successful for other 3 threads. I had to call configure_sgx() again from soc_init_cpus() which is the BSP-only function to make it enable on the BSP. Another pending work is the implementation for the Owner Epoch update which shall be added later. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified SGX activation is successful on all threads. Change-Id: I8b64284875eae061fa8e7a01204d48d320a285a9 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18445 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add option to disable host reads to PMC XRAMRizwan Qureshi
FSP disables host access to shadowed PMC XRAM registers by default, it also provides a UPD to enable/disable host reads to these regiters. Expose the same in devicetree as a config option. Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add configs for enabling DCI and TraceHubAamir Bohra
Add configs for enabling Intel TraceHub and DCI for aid in debugging. Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/skylake: Fix remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-15intel/skylake: Support for setting AC/DC loadlineDuncan Laurie
Add options to set the AC and DC loadline values for each supported VR type so these can be tuned on a per-board basis in devicetree.cb. BUG=b:36228330 BRANCH=none TEST=Build and boot on Eve and check debug FSP output to ensure that it is applying the provided loadline values Change-Id: I2a5533d2c9fd86351c86584e3738e80ac4c1f915 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18819 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
With the move to FSP 2.0 the number of VR types supported was reduced to 4, and the VR_RING type is no longer present. This means all existing boards using FSP 2.0 are incorrectly passing VR configuration into FSP as the values corresponding to "GT Sliced" and "GT Unsliced" have changed. Fix this by updating the skylake SOC VR handling to account for changes in the FSP configuration and no longer provide VR_RING type when using FSP 2.0. BUG=b:36228330 BRANCH=none TEST=manual: build and boot on Eve Change-Id: I59eea9fba006a4c235d7b42d07fdc6e4f44f7351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-15intel/skylake: nhlt: Add support for rt5514 NHLT blobDuncan Laurie
Add support for describing the NHLT blob for the rt5514 DSP. Currently this only supports 4 channel capture. BUG=b:35585307 BRANCH=none TEST=build and boot on Eve P1 Change-Id: Ib59b56222f9aa65370fdcf9ddf25145c571b1b2e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18816 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-14soc/intel/skylake: Extract DIMM Information from FSP MEM INFO HOBBarnali Sarkar
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB and save it in CBMEM. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in SMBIOS Table from Kernel command "dmidecode". Change-Id: I593d4ccb0d4866e99913a73c49b2f000b51827d1 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18275 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-10soc/intel/skylake:Add _DSM method to reduce D3 cold delay for eMMC controllersowmyav
eMMC Controller is taking over 100ms to resume during runtime which results in I/O latency issues on the Skylake systems like Cave and Caroline. This patch adds _DSM method for eMMC comtroller for specifying the device readiness durations. Function index 9 returns package of five integers to set D3 cold delay to zero and ACPI constant Ones for the elements where overriding the default values is not desired. BUG=b:35774937 BRANCH=none TEST=update caroline coreboot and test i/o latency is under 100ms Change-Id: Iacc8aa8560897da8770fe559ca8cd17aaf6ebeba Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/18532 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-09soc/intel/skylake: Add GPIO macros for IOxAPIC and SCILi Cheng Sooi
Add two GPIO macros: 1. PAD_CFG_GPI_APIC_EDGE allows a pin to be route to the APIC with input assuming the events are edge triggered. 2. PAD_CFG_GPI_ACPI_SCI_LEVEL to route the general purpose input to SCI assuming the events are level triggered. Change-Id: I944a9abac66b7780b2336148ae8c7fa3a8410f3f Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com> Reviewed-on: https://review.coreboot.org/18533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-01 21:04:30 +0000