summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2018-03-26soc/intel: Add KBL-S MCH and some KBL PCH supportGaggery Tsai
This patch adds the support for KBL-S MCH and Z270, H270, B250 and Q250 PCH chips. BUG=None BRANCH=None TEST=Boot with KBL-S CPU and B250/H270 PCHs. Change-Id: If03abb215f225d648505e05274e2f08ff02cebdc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/25305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-03-26soc/skylake/cpu: Fix Intel SpeedStep enable/disableMatt DeVillier
In an attempt at consolidation, commit 0a203d1 [1] introduced an additional read/write of the MISC_ENABLE msr, as well a bug which nullified the setting of Intel SpeedStep by inserting said read/write calls in between another set of read/write calls to the same msr. Fix by reverting to previous (simpler) implementation. [1] soc/intel/skylake: Use CPU common library code https://review.coreboot.org/19566 Test: boot Linux on Librem13v2, read MISC_ENABLE msr and verify SpeedStep bit correctly set based on devicetree setting. Change-Id: Id2ac660bf8ea56d45e8c3f631a586b74106a6cc9 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-23soc/intel/cannonlake: Enable low power S0 Idle capabilityVaibhav Shankar
This patch sets the ACPI FADT flag ACPI_FADT_LOW_POWER_S0 if S0ix is enabled for the platform. This also sets the FSPUPD to indicate the status of S0ix on the platform. TEST= Boot to OS and check the ACPI_FADT_LOW_PWR_IDLE_S0 flag is set in FACP table - FADT.Flags[21] bit. Change-Id: I6214ebb61f25ef8b704e60c8474808493c92e6f6 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/25292 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23soc/intel/apollolake: Bypass FSP's deassertion of PERST# signal.Shamile Khan
BUG=b:76058338 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I1858c7843d16b6b63fc30762a889916bbb9b781a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25311 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-22soc/intel/skylake: Define IFD_CHIPSETFurquan Shaikh
This change defines IFD_CHIPSET as sklkbl to allow ifdtool to set the right access control bits for SKL/KBL platforms. BUG=b:76098647 BRANCH=poppy TEST=Verified that the access control bits on KBL platforms are set correctly. Change-Id: I7b2131caa06d6a975e703262931ec0ea519a86aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-20soc/intel/apollolake: Add support for GSPIRavi Sarawadi
BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Iec96f926ba7162074090617b7cf1c84e36b0fb37 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/24906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-19soc/intel/apollolake: Add PCIe de-emphasis enable configuration.Shamile Khan
PCIe de-emphasis is enabled by default. Thunderpeak Wi-Fi requires it to be disabled. Therefore allow it to be configured via a device tree setting. TEST=On GLKRVP, verify Thunderpeak Wi-Fi card shows up in lspci when de-emphasis is disabled in device tree. Change-Id: Iae204768dfe00a638c764644c44c7cda269e73e0 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25185 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-17soc/intel/apollolake: handle different memory profiles for apl and glkAaron Durbin
glk has different memory profile values than apl. Therefore, a translation is required to correctly set the proper profile value depending on what SoC (and therefore FSP) is being used. Based on SOC_INTEL_GLK Kconfig value use different profiles. BUG=b:74932341 Change-Id: I6ea84d3339caf666aea5034ab8f0287bd1915e06 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25249 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-16soc/intel/apollolake: Add config option for enabling hotplugFurquan Shaikh
PcieRpHotPlug in apollolake UPD is default enabled. This change adds a config option to enable hotplug only if explicitly requested by mainboard. This changes the default behavior on all apollolake boards to have hotplug disabled. BUG=b:74633273 BRANCH=reef,coral Change-Id: I572c054d31aaf5d43a79c4b1773ec9356da48d9d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
This change uses an array pcie_rp_clkreq_pin for accepting CLKREQ# from mainboards instead of defining a separate property for each root port. This allows us to use memcpy to copy the entire array into FSP params as well as new properties for PCIe root ports can be added as arrays in future CLs. BUG=b:74633273 BRANCH=reef,coral Change-Id: Ifa05f1e38fcfd95063ec327712e472cdbd12dbb7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-15soc/intel/broadwell: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Haswell/Lynxpoint code. Test: boot Windows 10 on google/lulu with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: I024f4f0784df3cbbb9977692e9ef0ff9c3552725 Signed-off-by: CoolStar <coolstarorganization@gmail.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-14soc/intel/cannonlake: Disable RTC write protectCaveh Jalali
The cannonlake FSP enables PchLockDownRtcMemoryLock by default, but we need this memory to be writable. We normally over-ride this in the SoC chip init code, so we'll do the same on cannonlake. BUG=b:71722386 BRANCH=none TEST=Filled /dev/nvram with 0xff and 0x00 bytes to verify we can flip all the bits. Change-Id: I7cdd4abc2b3795d7dd82236fbe3c112428ee882b Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/25069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org>
2018-03-14soc/intel/cannonlake: Add SaGv value definitionLijian Zhao
SaGv(Sytem Agent Dynamic Frequency) have four settings, disabled, disabled but running at fixed lower frequency, disabled but running at fixed middle frquency, disabled but running at fixed high frequency and totally enabled. BUG=None. Change-Id: Ib5fb648179e7889aaa64d91e6cf7a7a7503f4225 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-14soc/intel/baytrail: add support for Intel GMA OpRegionMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to generate ACPI OpRegion, save the table address in ASLB, and restore table address upon S3 resume. Implementation largely based on existing Broadwell code. Test: boot Windows 10 on google/squawks with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: Iab15e1de2bb7d8fbec2e8705a621cfca0f255d4b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-09soc/intel/skylake: Move PCR DMI programming into bootblockSubrata Banik
As per PCH BWG 2.5.16, set up LPC IO Enables PCR[DMI] + 2774h bit [15:0] to the same value program in LPC PCI offset 82h. Also this cycle decoding is only allowed to set when SRLOCK is not set. Hence move the required programming from lpc.c to pch.c. Also only enable COM port ranges if CONFIG_DRIVERS_UART_8250IO Kconfig is selected. Change-Id: Ie706735492a450baa653d8a8bb74c6e42f5150b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-09soc/intel/common: Enable decoding of the COMB range to LPC based on KconfigSubrata Banik
By default all Intel platform has enable IO decode range for COMA if CONFIG_DRIVERS_UART_8250IO is selected. With this patch, COMB will get enable based on CONFIG_SOC_INTEL_COMMON_BLOCK_LPC_COMB_ENABLE Kconfig selection. Also make lpc_enable_fixed_io_ranges() function returns Enabled I/O bits to avoid an additional pci configuration read to get the same data. Change-Id: I884dbcc8a37cf8551001d0ca61910c986b903ebc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/25045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2018-03-09soc/intel/denverton_ns: Update UART legacy mode to keep FSP tracesJulien Viard de Galbert
The FSP can only output its traces when the HSUART PCI device is available. - Move the hiding to after last FSP call. - Adapt coreboot PCI enumeration to keep the legacy configuration. With UART configured as legacy Linux will not re-enumerate it but detects it as legacy (ttyS0 instead of ttyS4). Change-Id: Id8801e178ffd8eeee78ece07da7bd6b8dbd88538 Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/23623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-03-08soc/intel/common/block/gspi: set cs polarity before usingNick Vaccaro
Move call to __gspi_cs_change() in gspi_ctrlr_setup() to after initialization of cs polarity since it requires polarity to be set to work properly. Failure to do so confuses cr50. BUG=b:70628116 BRANCH=chromeos-2016.05 TEST='emerge-meowth coreboot' and verify on scope that chip select polarity is correct for the first transaction. Change-Id: I20b4f584663477d751a07889bccc865efbf9c469 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-08soc/intel/braswell: add resource allocation for LPE BAR1Matt DeVillier
coreboot's PCI resource allocator doesn't assign BAR1 for Braswell's LPE device because it doesn't exist, but is required by Windows drivers for the device to function. Manually add the required resource via the existing lpe_read_resources function, and marked it as IORESOURCE_STORED so pci_dev_set_resources ignores it. TEST: boot Windows 10 on google/edgar, observe that memory resources are properly assigned to LPE driver for BAR1 and no error reported. Change-Id: Iaa68319da5fb999fe8d73792eaee692cce60c8a2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-03-08soc/intel/braswell: add ACPI for eMMC/SD devices in PCI modeMatt DeVillier
Allows eMMC in PCI mode to be seen/used by Windows. Test: boot Windows installer on google/edgar, observe internal eMMC storage available for installation when eMMC in PCI (vs ACPI) mode. Change-Id: I4272c198e5e675f451a1f4de5d46e3cd96371446 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-07soc/intel/braswell: add LPEA resources to southcluster.aslMatt DeVillier
The LPEA device memory resources, required by Windows drivers, were not being set. Allocate required resources per Inte'sl CHT Tianocore reference code. Test: boot Windows on google/edgar, observe LPEA device working properly. Change-Id: Ic3ecfc2ddade7d76dbaa95ffdd82599c3bcf35da Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-06soc/intel/braswell: increase LPEA fw allocation to 2MiBMatt DeVillier
Increase memory allocated for the LPEA firmware from 1MiB to 2MiB to match Intel CHT reference code and fix Windows functionality. Test: boot Windows on google/edgar, observe no error in Device Manager for LPEA audio device due to BAR2 resource allocation. Change-Id: I7cffcdd83a66a922c2454488c8650df03c9f5097 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-06soc/intel/braswell: fix PCI resource PMAX/PLEN valuesMatt DeVillier
Without PMAX correctly set, the calculation for PLEN is incorrect, leading to a Windows BSOD on boot. Correct PMAX using code from Baytrail SoC, setting PMAX to (CONFIG_MMCONF_BASE_ADDRESS - 1). Test: Boot Windows 10 on google/edgar without BSOD. Change-Id: I4f2f4a0ff3a285826709f9eaafa40b0bf0cafb83 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/24985 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-06soc/intel/skylake: Remove MCFG constantsDuncan Laurie
The MMCONF base address and length are set in Kconfig so it does not need to be redefined by the SOC as the code can just use the Kconfig variable directly. Tested on a fizz board to ensure MCFG is still created properly. Change-Id: I5fd472b1afc8264823a2b9db0f296fbfb6b1ecc0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/24975 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-06soc/intel: Fix MCFG end bus numberDuncan Laurie
The ACPI MCFG table is generated with a static end bus number of 255, which expects that the reserved range in E820 is 256MB. However the actual MCFG range is configurable with Kconfig, so these two values may not match when the OS tries to determine the range: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge Instead of forcing the end bus number to be 255 use the Kconfig value to set it based on the current configuration. Tested on a fizz device to ensure that the kernel no longer complains: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) Change-Id: I999ea9b72b9deba5f27dd692faa0408427a0bf89 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/24974 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-05soc/intel/common/block/smm: Add configurable delay before entering S5Furquan Shaikh
This change adds a configurable delay in milliseconds before SLP_EN is set in SLP_SMI for S5. Reason for doing this is to avoid race between SLP and power button SMIs. On some platforms (Nami, Nautilus), it was observed that power button SMI triggered by EC was competing with the SLP SMI triggered by keyboard driver. Keyboard driver indicated power button press which resulted in depthcharge triggering SLP_SMI, causing the AP to enter S5. However, the power button press also causes the EC to send a pulse on PWRBTN# line, which is debounced for 16ms before an interrupt is triggered. This interrupt was generated after SLP_SMI is processed which resulted in the device waking back up from S5. This change adds a config option SOC_INTEL_COMMON_BLOCK_SMM_S5_DELAY_MS which is used to add a delay before SLP_EN is set for S5. This change should only affect CHROMEOS boards as the config option will be 0 in other cases. BUG=b:74083107 TEST=Verified that nami, nautilus do not wake back from S5 on power button press at dev mode screen. Change-Id: Iaee19b5aba0aad7eb34bd126fda5b0f6ef394ed7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/24964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-01soc/intel/broadwell: Generate ACPI DMAR tableMatt DeVillier
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the GFXVTBAR is only generated if the IGD is enabled. Change-Id: Id7c899954f1bae9d2b48532ca5ee271944f0c5f6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-03-01soc/intel/broadwell: Enable VT-d and X2APICMatt DeVillier
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers and reserved from the OS. Change-Id: I7afcce0da028a160174db2cf6b4b6735bcd59165 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-02-28skylake: Fix unwanted disablement of ACPI UPWEKane Chen
In PORTSC, Port Enabled/Disabled(PED) is RW1CS. When there is a USB device attached on system, current UPWE method will set 1 to PED, this will cause port disabled as it's RW1CS. This change is inspired by xhci_port_state_to_neutral in linux driver. It will mask all RO and RWS bits and set WDE and WCE. BUG=b:70777816 TEST=System won't be awakend from s3 automatically when usb devices is attached. Also system can be awakend by hotplugging usb devices under S3. Change-Id: Ifd4c2d6640fea538e0ac71d7c5e73ab529e94f42 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/23848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-28soc/intel/skylake: Add support to print ME versionFurquan Shaikh
This change adds a boot state callback to print ME version after DEV_ENABLE is complete. Information is printed only if UART_DEBUG is enabled because talking to ME to get the firmware version adds ~1 second to boot time. TEST=Verified on Soraka that ME version printed is correct. Change-Id: I360d5d7420950d5aa255df08be6d7123621b87a8 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/23857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22soc/intel/cannonlake: Clear EMMC timeout registerLijian Zhao
Clear EMMC timeout register to avoid EMMC issue according to cannonlake bios writer guide. BUG=b.71586766 TEST=Install OS into EMMC successfully on meowth P1 platform. Change-Id: I39e927a2c312c94561213f9f7c3319dcafa426b9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-22soc/intel/cannonlake: Add emmc/sdc port idLijian Zhao
EMMC and SD Controller port id listed here, the port id definition came from Cannonlake BIOS Writer Guide 570374. BUG=None TEST=None Change-Id: I901e90c47b08bb013fcfee5def610e320a7ac19a Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23789 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-22soc/intel/cannonlake: Add more HDA Audio Link settingsLijian Zhao
Since FSP version 7.x.11.43, more HDA Audio link options are exposed, so included that into coreboot. Users can modify that base on platform implementations. BUG=None TEST=Boot up with debug build version FSP and check the debug print result on meowth platform. Change-Id: Ib2a75f554ddf9919a62c78a162ec1b9e602f1f5d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-22soc/intel/cannonlake: Add provision to make CSME function disable in SMM modeSubrata Banik
TEST=lspci from Chrome OS shows CSME device is not visible over PCI tree. Change-Id: I3e0a5b00758a4ce42f2f190748c293c5ce07390c Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23824 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22soc/intel/common/block/smm: Add option to have SOC specific SMI Handler at ↵Subrata Banik
finalize() This patch ensures common code provides an option to register a SOC specific SMI handler before booting to OS (specifically during ramstage). Change-Id: I50fb154cc1ad4b3459bc352d2065f2c582711c20 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tung Lun Loo <tung.lun.loo@intel.com>
2018-02-22soc/intel/common/block/pcr: Add function for executing PCH SBI messageSubrata Banik
This function performs SBI communication Input: * PID: Port ID of the SBI message * Offset: Register offset of the SBI message * Opcode: Opcode * Posted: Posted message * Fast_Byte_Enable: First Byte Enable * BAR: base address * FID: Function ID * Data: Read/Write Data * Response: Response Output: * 0: SBI message is successfully completed * -1: SBI message failure Change-Id: I4e49311564e20cedbfabaaceaf5f72c480e5ea26 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23809 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-22skylake: remove legacy devices from ACPIPatrick Georgi
Once the FADT reports that they don't exist it makes no sense to have them in ACPI's device tree. Change-Id: Ice82f0de592b6ca955148479fecc8506a7cdcddc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reported-by: dhaval.v.sharma@intel.com Reviewed-on: https://review.coreboot.org/23835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.corp-partner.google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-22soc/intel/skylake: Do not set ACPI_FADT_LEGACY_DEVICESFurquan Shaikh
SKL/KBL PCH does not support legacy devices. This change removes the setting of ACPI_FADT_LEGACY_DEVICES flag in FADT for SKL/KBL. It helps Linux kernel to disable controllers required to support legacy devices only e.g. i8237 DMA controller. BUG=b:72679357 Change-Id: Ie2a85a719997157f52b0eab7254689f5a56ba05b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/23833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.corp-partner.google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-20src/soc: Fix various typosJonathan Neuschäfer
These typos were found through manual review and grep. Change-Id: I6693a9e3b51256b91342881a7116587f68ee96e6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-16soc/intel/cannonlake: Update GPIO ASLLijian Zhao
GPIO pin definition had been updated to match Cannonlake PCH-LP EDS, hence the ACPI dsdt table will include those changes as well. BUG=None TEST=Build coreboot image, flah coreboot image into DUT, and target system can boot up into OS. Change-Id: I958e0cb71b4e656bec9bfe2d12076b577b57629b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/intel/cannonlake: Use common PCR ASLLijian Zhao
Switch to use common version of PCR asl. BUG=NONE TEST=Boot up into chrome OS properly on cannonlake rvp platform. Change-Id: I4975704434d4743bcc0fb6062115da349166c3a6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/common/block/gpio: Change group offset calculationBora Guvendik
Add group information for each gpio community and use it to calculate offset of a pad within its group. Original implementation assumed that the number of gpios in each group is same but that lead to a bug for cnl since numbers differ for each group. BUG=b:69616750 TEST=Need to test again on SKL,CNL,APL,GLK Change-Id: I02ab1d878bc83d32222be074bd2db5e23adaf580 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22571 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16soc/intel/skylake: Switch to common PCR ASLLijian Zhao
Using common PCR asl for skylake/kabylake platform. BUG=None TEST=None Change-Id: I99ec7c878adaea439108553c0fac9d5abe1bc248 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/common: Add generic PCR aslLijian Zhao
Access to PCH Private Configuration Space Register can be addressed via SBERG_BAR, the method is generic across several generations of Intel SOC. BUG=None TEST=None Change-Id: Iaf8c386824ee08cb93cb419ce3cdb2d3fe22a026 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-02-16soc/intel/cannonlake: Add missing GPIO pin definitionsLijian Zhao
Fill the missing GPIO pin definitions, includeing community 3. Change-Id: I73b7803c73446660f5c25b1263e47bb50a955c56 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22482 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-14intel/fsp: Update cannonlake fsp headerLijian Zhao
Update Cannonlake FSP header to revision 7.x.25.31. Following changes had been made: 1. Add PeciSxRest option. 2. Add Thermal Velocity Boost option. 3. Add VR power deliver design option. 4. Match MrcChannelSts. TEST=NONE Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I32e976eacf39d2cd75f8288c86d1de1a54c194c6 Reviewed-on: https://review.coreboot.org/23677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-11soc/intel/cannonlake: Add Pch iSCLK programmingLijian Zhao
In order to reduce BOM cost and board area for imaging solution, the sensor requires a 19.2/24MHz reference clock from PCH. In addition to that, having PCH to supply the sensor reference clock will prevent dependency on CPU power management and also avoid level shifter cost. Pch iSCLK is only required for CNP-LP with the camera sensor on the platform. BUG=None TEST=Boot up into OS and read back PCH iSCLK programming through iotools. Change-Id: I28c97a75f2a7f5122a20c8b8f0f2671037a7eca6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23367 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-09drivers/intel/fsp2_0: Remove fsp_find_smbios_memory_info() from FSP2.0 driverSubrata Banik
As per FSP 2.0 specification and FSP SOC integration guide, its not expected that SMBIOS Memory Information GUID will be same for all platform. Hence fsp_find_smbios_memory_info() function inside common/driver code is not generic one. Removing this function and making use of fsp_find_extension_hob_by_guid() to find SMBIOS Memory Info GUID from platform code as needed. Change-Id: Ifd5abcd3e0733cedf61fa3dda7230cf3da6b14ce Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-08soc/intel/cannonlake: Add support for EMMC DLL updateLijian Zhao
Add option to have customized DLL setting for EMMC interface to make EMMC able to run at HS400 speed. BUG=None Change-Id: I38bc022d8c05dd1fbd03dc26aa6f33cd249e8248 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-08soc/intel/skylake: Clean up SMBIOS Table Type 17 creationSubrata Banik
* Add Memory Channel Status Enum for Channel detection. * Align > 80 characters per line. * Add hob_size == 0 check. Change-Id: I6ad99de53e280a3db431f706310e6cb22b8b3953 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 05:17:08 +0000