Age | Commit message (Collapse) | Author |
|
Replace the magic clrsetbits_le32, read32, write32 by SET_BITFIELDS and
other bit field helpers.
Change-Id: I327297dd10718fbef7275fe95c95d00d3ab6ac84
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35471
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If DRAM calibration fails or mem test fails using the cached calibration
results stored in flash, rerun DRAM full calibration. If partial
calibration fails or the mem test following it fails, hang forever.
Partial calibration acts as a fallback approach in case of full
calibration failure. Therefore, if it fails, there would be no other
ways to initialize DRAM. Instead of falling into reboot loop and
draining out of battery, it is better to just hang so that the end user
may notice that and send to RMA.
BUG=b:80501386,b:139099592
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I8e1d4f5bc7b45f45a8bfef74e86ec0ff6a556af4
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35481
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since struct dramc_param has been defined, we can pass the struct
directly from mt_mem_init().
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: If7333fb579eff76dd9d1c2bf6fdfe7eccb22050f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35846
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Load the calibration params from flash first and check the correctness
of the params. If the params have correct format, perform DRAM fast
calibration with these params to reduce bootup time. Otherwise, load the
DRAM blob and perform DRAM full calibration.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I8de29b14b1fb24b3b4f351c855c5c4d8f350cc34
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Load calibration params from flash. If the format of the params is
correct, use these calibration params for fast calibration to reduce the
bootup time.
Bootup time of DRAM partial calibration:
- 1,349,385 usecs with low frequency
- 924,698 usecs with middle frequency
- 1,270,089 usecs with high frequency
3,544,172 usecs in total.
Bootup time of DRAM fast calibration:
- 216,663 usecs with low frequency
- 328,220 usecs with middle frequency
- 322,612 usecs with high frequency
867,495 usecs in total.
BUG=b:139099592
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I9ef4265dd369a1c276bb02294696556df927e7bc
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35164
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dramc_param module simplifies the communication between coreboot and
MTK DRAM full calibration blob, and is shared by both implementations to
ensure the same format of parameters.
BUG=b:139099592
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I4cfd634da1855a76706aab0b050197251e2ed4dd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Two fields of struct sdram_params are renamed for future CL of DRAM full
calibration. Field 'impedance' is also removed.
BUG=none
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: I2f9673fd5ea2e62ee971f0d81bdd12aaf565e31c
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35738
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because vcore is the power of ddrphy in the soc, DRAM DVFS needs to be
calibrated with different vcore voltages to get correct parameters.
A new API is added to allow changing vcore voltage.
BUG=b:80501386
BRANCH=none
TEST=measure vcore voltage with multimeter
Change-Id: Ic43d5efe7e597121775dc853a3e2a08ebc59657d
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33391
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support mt8183 power saving during suspend to RAM, this patch loads
SPM firmware to support SPM suspend. SPM needs its own firmware to do
these power saving in the right timing under correct conditions. After
linux PM suspends, SPM is able to turn off power for the last CPU and do
more power saving for the SoC such as DRAM self-refresh mode and turning
off 26M crystal.
BUG=none
BRANCH=none
TEST=suspend/resume passes for LPDDR4 3200
Change-Id: I3393a772f025b0912a5a25a63a87512454fbc86e
Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Devices using eMCP may run at a high DRAM frequency (e.g., 3600Mbps)
while those with discrete DRAM can only run at 3200Mbps. This patch
enables 3600Mbps for eMCP DDR for better system performance.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test passes on Kukui
Change-Id: Iab6a9c2c390feeb9497b051a255b29566909e656
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add more DRAM frequency bootup to support DRAM frequencies 1600Mbps,
2400Mbps, 3200Mbps and 3600Mbps.
BUG=b:80501386
BRANCH=none
TEST=Memory test passes on eMCP platform
Change-Id: Ic1378ca43fb333c445ca77e7dc0844cdf65f2207
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch implements the dram init setting by replacing the hard-coded
init sequence with a series of functions to support calibration for more
frequencies. These functions are modified from MediaTek's internal DRAM
full calibration source code.
BUG=b:80501386
BRANCH=none
TEST=1. Kukui boots correctly
2. Stress test (/usr/sbin/memtester 500M) passes on Kukui
Change-Id: I756ad37e78cd1384ee0eb97e5e18c5461d73bc7b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Consider the association between modem[1] and DCXO, this patch is a fix for
eb5e47d("mediatek/mt8183: update dcxo output buffer setting") [2]
We should not disable XO_CEL and block the bblpm request when modem is still ON.
For power-saving, we still could disable unused XO_CEL and
mask request to disable unused power mode when modem is no longer be used.
[1] https://review.coreboot.org/c/coreboot/+/32666
[2] https://review.coreboot.org/c/coreboot/+/32323
BRANCH=none
TEST=Boots correctly on Krane.
Change-Id: I047ebed615e874977ca211aafd52b5551c71b764
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add scp voltage initialization.
BUG=b:135985700
BRANCH=none
Test=Boots correctly on Kukui and scp can boot up normally
Change-Id: I5afb60af3c14490e20f28f1c089cfca42ddf7fcf
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Enlarge PRERAM_CBFS_CACHE region from (16K - 4) to (48K - 4) bytes to
decompress and load more data from CBFS in romstage.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Idc23a67c886718e910ca3c50468e5793f19c8d66
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34896
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since SRAM space is too small to fit all needed features, enable
VBOOT_RETURN_FROM_VERSTAGE and overlap decompressor, verstage and
romstage to gain more space.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Ibe336cf93b01fa2ea57b4c2e0a89685424878c91
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34871
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MT8183 display serial interface (DSI) is based on MIPI
Alliance Specification, supporting high-speed serial data
transfer between host processor and peripheral devices such
as display modules.
DSI supports both video mode and command mode data transfer
defined in MIPI spec, and it also provides bidirectional
transmission with low-power mode to receive messages from
the peripheral.
Reference: MT8183 Application Processor Functional Spec,
6.7 Display Serial Interface (DSI)
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic413f524ca0b36f0b01f723a71fe9745e2710cd2
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The MT8183 SOC has a DISP (display controller) that supports
overlay, read/write DMA, ... etc. The output of DISP goes to
display interface DSI, DPI or DBI directly.
Reference: MT8183 Application Processor Functional Spec,
6.1 Display Controller
BUG=b:80501386,b:117254947
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic4aecc58d081f14f5d136b9ff8e813e6f40f78eb
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch implements i2c driver for MT8183.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on kukui.
Change-Id: I0a4d78b494819f45951f78e5a618021000cf3463
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30976
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SRCCLKENA holds 26M clock, which will fail suspend/resume,
and the SRCCLKENA is not used by mt8183,
so we can simply release it for suspend/resume to work.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui, suspend test pass.
Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082
Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SSPM is "Secure System Power Manager" that provides power control in
secure domain. The initialization flow is to load SSPM firmware to
its SRAM space and then enable.
BUG=b:80501386
BRANCH=none
Test=Build pass
Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Calibrate RTC eosc clock which will be used when RTC goes into
low power state.
BUG=b:133872611
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ie8fd6f4cffdcf7cf410ce48343378a017923789c
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Set input_hertz to 26 MHz.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot; emerge-elm coreboot
Change-Id: I7f9c329ae5d610f2516e60f06b2ac96ebbeaa897
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
DCXO consists of core that generates clock and output buffers that
provide clock to other peripheral components.
This patch mainly eliminates the extra power consumption of output buffers.
We only enable the buffer for SOC and disable unused buffers for power-saving.
Also disable useless buffer power mode to guarantee the lowest power state.
BRANCH=none
TEST=Boots correctly on Kukui.
Change-Id: I2e5ce181ad327ccf852979da53baca4f249912fe
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32323
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When system shuts down, RTC enable eosc calibration feature to save
power. Then coreboot RTC driver needs to call rtc_enable_dcxo function
at every boot to switch RTC clock source to dcxo.
BUG=b:128467245
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Iee21e7611df8959cbbc63b6e6655cfb462147748
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test pass on Kukui.
Change-Id: Ic48580e7e5db25dc1c29dabf41c4e3816fb946d3
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
|
|
Add infra group DCM (Dynamic Clock Management) settings,
which slows down OR gate clocks while hardware is in idle state.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui.
Change-Id: I4741dfb7b984deb92171f370e5fb2593829d74c2
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
|
|
Add spi tick_dly setting for high-speed spi xfer.
BUG=b:80501386
BRANCH=none
TEST=emerge-kukui coreboot; emerge-elm coreboot
Change-Id: Ie49fc3efe2a4a6dcdf2a2fc4c91b47e35d4f086e
Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set SPI GPIO driving to support SPI FLASH.
BUG=b:80501386
BRANCH=none
TEST=emerge-kukui coreboot; emerge-elm coreboot
Change-Id: I95002ec71abd751c33c089185db04ed4a8686699
Signed-off-by: Mengqi Zhang <Mengqi.Zhang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32460
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The values from auxadc may be incorrect if not calibrated by efuse.
Without calibration, the value error range is about +/-50mv,
and after being calibrated the error range is about +/-10mv.
BUG=b:131391176
TEST=make clean && make test-abuild; boots on Kukui rev 2 units.
BRANCH=none
Change-Id: Iccd6ea0ad810c993f9b62c0974279c960f890e52
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32800
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: JG Poxu <jg_poxu@mediatek.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The default voltage of vsim2 is set to 2.76V for sim card usage.
In general, 2.76V of vsim2 is composed of 2.7V main voltage and 0.06V calibration voltage.
However, vsim2 is used for the tx_ovdd power of display port IT6505 on the kukui board design which needs 2.7V.
So we set it to 2.7V with modifying calibration value.
BUG=b:126139364
BRANCH=none
TEST=measure vsim2 voltage with multimeter
Change-Id: I4dffdde89cbde91286d92e6c2b445f0b3d0ad2fe
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With the default CPU voltage (0.8v), CPU frequency should be 1417Mhz at
most. We have to raise CPU frequency to 1989MHz after increasing CPU
voltage to 1.05v in romstage.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: I4c3e0fa27ccda8e0efe422b6ab503a1efb1697e9
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set CPU frequency from 1100MHz to 1989MHz to improve booting time.
BUG=b:80501386
BRANCH=none
Test=Boots correctly on Kukui
Change-Id: Id41c7ea8905c4db2537a5c32f96eb7c6b2c008ea
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32397
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Fix RTC lpd settings. Rewrite powerkeys after lpd init
to enable low power detect function.
2. Rearrange RTC initialization flow.
3. Add return status for rtc_init.
4. Add log if calling pwrap_write or pwrap_read fail.
5. Increase timeout time to resolve unexpected timeout.
BUG=b:127405695
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: I6f26edd6699c2f6d9af80c285b70742b44407136
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
|
|
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch is a raw application of
find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g'
Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Until now the TCPA log wasn't working correctly.
* Refactor TCPA log code.
* Add TCPA log dump fucntion.
* Make TCPA log available in bootblock.
* Fix TCPA log formatting.
* Add x86 and Cavium memory for early log.
Change-Id: Ic93133531b84318f48940d34bded48cbae739c44
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This patch implements RTC initialization.
1. initialization dcxo
2. rtc clock using dcxo 32k
3. export RTC_32K1V8_0 to SOC, export RTC_32K1V8_1 to WLAN
4. rtc register initialization
5. refactor the driver common part
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Icccb9360a507fcbfd865b107cd3630e71c810d55
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/31046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The setting of these registers are only for i2c pin.
BUG=b:80501386
BRANCH=none
TEST=Boot correctly on Kukui
Change-Id: I518ca07645fe55aa55e94e4f98178baa0b74a882
Signed-off-by: jg_poxu <jg_poxu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/30974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
After CL:31122, we can finally define a memory type specific for BL31,
to make sure BL31 is not loaded on other reserved area.
Change-Id: Idbd9a7fe4b12af23de1519892936d8d88a000e2c
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://review.coreboot.org/c/31123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
MT8183 only allows booting from eMMC, so we have to do eMMC emulation
from an external source, for example EC, which makes the size of
bootblock very important.
This CL adds a new function mt8183_early_init, which includes all
initializations that should be done in early stages. All mainboards
using MT8183 should manually call it in either bootblock or verstage.
BRANCH=none
BUG=b:120588396
TEST=manually boot into kernel
Change-Id: I35d7ab875395da913b967ae1f7b72359be3e744a
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/31024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: Id1e8862ff6feb9628d37fe5300780ff56865a563
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I4434897864993e254e1362416316470083351493
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Refactor GPIO EINT code which can be reused among similar SoCs.
BUG=b:80501386
BRANCH=none
TEST=emerge-elm coreboot; emerge-kukui coreboot
Change-Id: Ib01b43cf1aa4082d7d968fe1ef82f75e8cf05b8b
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/29837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I504d6d5c9ea01b11a9f2a05b5ee4b5f1af87e23f
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/28841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
PMIC provides power features like auxadc, buck/ldo,
interrupt-controller..etc
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Ic247faf73517f6512f9c9a69ba0254c749d68d4c
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/29422
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PMIC wrapper is a proprietary hardware to connect the PMIC. This
patch implements PMIC wrapper driver for the communication with PMIC.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Idbdb15f11227ded3f5d18fe6504c8c646973b733
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/29421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: Icb281f1b23c637971497eb28ed428235adf42f2d
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/28839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: If462126df31468ef55ec52e2061b9f98d3015f61
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/28838
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|