Age | Commit message (Collapse) | Author |
|
Load params from flash and use those params to do dram fast calibration.
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Change-Id: I45a4fedc623aecfd000c5860e0e85175f45b8ded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Adjust ssusb register layout and offset accroding mt8192 Soc
then refactor USB code which will be reused among similar SoCs
Signed-off-by: Tianping Fang <tianping.fang@mediatek.com>
Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com>
Change-Id: Icb4cc304654b5fb7cf20b96ab83a22663bfeab63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Implement mt_fmeter_get_freq_khz() in MT8192 to measure frequency of
some pre-defined clocks by frequency meter.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I75df0b040ed7ea73d25724a3c80040f4e731118f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45402
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename all mt_pll_raise_ca53_freq() into mt_pll_raise_little_cpu_freq().
Implement mt_pll_raise_little_cpu_freq() in MT8192.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: I97d9a61f39f2eb27f0c6f911a9199bf0eaae4fbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
LPDDR4x has 6 CA PINs, but for some 8GB LPDDR4X DDR, the left margin
of some CA PIN window is too small than others. Need to enable the CA
perbit mechanism to avoid those risks.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I58e29d0c91a469112b0b1292da80bcb802322d47
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41965
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: If16d244e07d9f369efd991132587a92e38200b45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Using common mtcmos code to power on audio and display modules in SOC.
TEST=Boots correctly on MT8192EVB. Passes the status check at the end of
mtcmos_power_on()
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ie7bff831eecfc2b4d315a577f6ff86befc483eab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45394
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The power status bits of display and audio of MT8192 are different
from the bits of MT8173 & MT8183, so move those under each chip.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Iaa211b8db733d8aa52d93af9e507042bf0984d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The UART index is never negative, so make it unsigned and drop the
checks for the index to be non-negative.
Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ia419de14614a7a1b583e0870e9ca2fcdc8cf815a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Support SPI flash dual read funciton which change spi mode (1-1-1)
to dual mode (1-1-2).
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: Iabd3668fc4bc42137b7743144fc1cced4fe72737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44852
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To speed up SPI flash read, enable DMA read function.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: Ic1679ef7940258350feeadac50ad8ea407fd7b90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Convert 0X -> 0x
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add a SPI-NOR flash controller which supports pio mode.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I1e38672a532dd8234b3ef24c84113888c8795810
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The gpio_common.h needs EINT_BASE from addressmap.h.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I20834e38343410526da0a489fed907acbf479d02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Change-Id: I3bae57e6777ab6fc46c771a034f814dd1175be95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize watch dog so the system won't reboot on timeout.
In addition, print the reason of reboot triggered by watch dog.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I7e849659700218f1c50365c2d68a32be2f703d94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Initialize CPU mmu and config range.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I5ba405dab87d51d373704657ccb44c07c7249041
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add driver for MT8192 SPI controller
TEST=Boots correctly on MT8192EVB
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Change-Id: I2094dd2f14ad19b7dbd66a8e694cc71d654a2b4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add DRAM resource in ramstage to load payload.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: Iac02f81fc7d47851b3bba442eb7043169fbdbcfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The first Makefile to support building minimal stage files for MT8192 SOC.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I2cf68805532f70f072b4e9a21ee61e2ebe4ebd9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43962
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add minimal function to report SDRAM size.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: If74b6b52dd6e91d1ff40cf8460b6a03b2f3bb6f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43961
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PLL and clock init code.
TEST=Boots correctly on MT8192EVB.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ia49342c058577e8e107b7e56c867bf21532e40d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add MT8192 GPIO driver.
Signed-off-by: Po Xu <jg_poxu@mediatek.com>
Change-Id: I4b230aebc9eb4ca1bbf444c3a2f30159d707f37b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43959
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I3a677195f5036321939c60c8f9f1bace7c4a2e3f
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add MT8192 address map, memlayout and first Kconfig. MT8192 is similar to
MT8183.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Change-Id: I4e34c03a11a77ed98674ffd8eeddb20ef5fea89d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43957
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I072745933fe141cac26afd044836a564e345d036
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43795
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the DRAM initialization code can only work on 4GB size and
want to support larger memory sizes in future, so add geometry
information to the DRAM calibration parameters.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I1fdf50b75c6a552c0a889f21e1a81ab4b9a305fa
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Different density should correspond to different tRFCab and tRFCpb
timing.
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I2599fcd620cdefe2e12480932ffd75e0416b9545
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some DRAM control settings need to apply to all channels,
so add those missing settings.
Also fix a typo (0x1 < 0) to (0x1 << 0).
BUG=none
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: I35e25c922ed45216d5f04835abcd10809a8d559a
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BIT(x) needs <types.h>.
Change-Id: I8e4a7af68a52d82117b8b091fa448bb6ad40ae7d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows
SoC/mainboard to provide a linker file for the platform. x86 already
provides a default memlayout.ld under src/arch/x86. With this new
Kconfig variable, it is possible for the SoC/mainboard code for x86 to
provide a custom linker file as well.
Makefile.inc is updated for all architectures to use this new Kconfig
variable instead of assuming memlayout.ld files under a certain
path. All non-x86 boards used memlayout.ld under mainboard
directory. However, a lot of these boards were simply including the
memlayout from SoC. So, this change also updates these mainboards and
SoCs to define the Kconfig as required.
BUG=b:155322763
TEST=Verified that abuild with --timeless option results in the same
coreboot.rom image for all boards.
Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ica355292eeda9c386b49db97f021566d52943d40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CA vref should alway select range[1]. But in fast calibration flow,
we missed the range selection and caused the CA vref to use the range[0] value.
The DQ vref should select correct range that corresponds to current frequency,
that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps
to select range[0].
Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf',
used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels.
MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%,
MR14 range[0] and range[1] values same as MR12.
BUG=b:153614919
BRANCH=kukui
TEST=Boots correctly on Kukui
Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become
very small value or negative value. When very small value or
negative value is used, the panel will be scrolling or distorted.
This patch adjusts their values so that they are greater than
the minimum value and keep total of them unchanged.
DSI transfer HBP or HFP, There are some extra packet. ex. packet
header(4byte) and eof(2byte) and (next)hs packet header(4 byte).
the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte)
and (next)hs packet header(4 byte). So the min hfp_byte is 2 when
HFP = 4.
This is equivalent to the Linux kernel DSI change in:
https://chromium-review.googlesource.com/c/chromiumos/third_party/
kernel/+/2186872
BUG=b:144824303
BRANCH=kukui
TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its
hbp only 6), the panel can display without scrolling or
distortions.
Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com>
Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using following commande:
diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l '
memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<'
Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Unused includes found using following commande:
diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l
'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\
|MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<'
|grep -v vendor |grep -vF '.h'
Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To change frequency, the SOC PLL team suggests procedure below:
First, we need to enable the intermediate clock and
switch the ca53 clock source to the intermediate clock.
Second, disable the armpll_ll clock output.
Third, raise armpll_ll frequency and enable the clock output.
The last, switch the ca53 clock source back to armpll_ll and
disable the intermediate clock.
BUG=b:154451241
BRANCH=jacuzzi
TEST=Boots correctly on Jacuzzi.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Used commands:
perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This replaces GPLv2-or-later and GPLv2-only long form text with the
short SPDX identifiers.
Commands used:
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist)
Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This reverts commit 285975dbba8c7f3bbb9f9950e79a30bb983d5123.
Reason for revert: VB2_RECOVERY_TRAIN_AND_REBOOT was never meant to have
any special effect on memory training behavior. It was just supposed to
be a "reboot automatically after reaching kernel verification" recovery
reason. On x86 devices this was used to prime the separate recovery
MRC cache in the factory (make sure it is initialized before shipping).
This isn't used on Kukui anyway, but in order to make sure nobody copies
this code and keep the behavior consistent between platforms, let's
remove it.
Change-Id: I5df5e00526e90cb573131de3c8bac9f85f4e3a5f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40623
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CONFIG_SEPARATE_VERSTAGE=n, all verstage code gets linked into the
appropriate calling stage (bootblock or romstage). This means that
ENV_VERSTAGE is actually 0, and instead ENV_BOOTBLOCK or ENV_ROMSTAGE
are 1. This keeps tripping up people who are just trying to write a
simple "are we in verstage (i.e. wherever the vboot init logic runs)"
check, e.g. for TPM init functions which may run in "verstage" or
ramstage depending on whether vboot is enabled. Those checks will not
work as intended for CONFIG_SEPARATE_VERSTAGE=n.
This patch renames ENV_VERSTAGE to ENV_SEPARATE_VERSTAGE to try to
clarify that this macro can really only be used to check whether code is
running in a *separate* verstage, and clue people in that they may need
to cover the linked-in verstage case as well.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I2ff3a3c3513b3db44b3cff3d93398330cd3632ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|