| Age | Commit message (Collapse) | Author |
|---|
|
Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This patch adds stub implementations of exception_init() to all archs
so that it can be called from src/lib/hardwaremain.c. It also moves/adds
all other invocations of exception_init() (which needs to be rerun in
every stage) close to console_init(), in the hopes that it will be less
likely overlooked when creating future boards. Also added (an
ineffective) one to the armv4 bootblock implementations for consistency
and in case we want to implement it later.
Change-Id: Iecad10172d25f6c1fc54b0fec8165d7ef60e3414
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176764
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2960623f4a59d841a13793ee906db8d1b1c16c5d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6884
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
tegra124: Set Tx FIFO threshold value to recommended setting
Reviewed-on: https://chromium-review.googlesource.com/175200
(cherry picked from commit c8f086711c6ae2db70fc8e0d84b54f5952fbe0ad)
tegra124: add CLK_X definitions
Reviewed-on: https://chromium-review.googlesource.com/175220
(cherry picked from commit 3f8a844bd2f151e06d82d1a7fac4492c6bc9417d)
tegra124: fix incorrect struct member in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/175270
(cherry picked from commit 967193d5984a086c297988caa580b61cb4d0414c)
tegra124: add the _x clocks to clock_enable_clear_reset
Reviewed-on: https://chromium-review.googlesource.com/175539
(cherry picked from commit df4c515d73b02061e5c98f51efd50e04b10d63f5)
tegra124: add clock support code for graphics.
Reviewed-on: https://chromium-review.googlesource.com/175162
(cherry picked from commit b8eb6ab4cdc5a583636c10fa05f947a244f94819)
tegra124: Clean up some #defines for DMA
Reviewed-on: https://chromium-review.googlesource.com/175631
(cherry picked from commit 1a0a900f2d060916c9878781b82113b16a7945d9)
tegra124: enable flow control for APBDMA in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/175630
(cherry picked from commit 873e6f9e95f6cb0162fa06216682fbc71ab0202d)
nyan: move clock setup for the display out of dca_init
Reviewed-on: https://chromium-review.googlesource.com/175656
(cherry picked from commit 32dd9947a60298ff9488c911629802c257ed6afc)
tegra124: more display PLL setup and clock hardcode removal.
Reviewed-on: https://chromium-review.googlesource.com/175732
(cherry picked from commit 80402876b5daa9e9389fd4fab5f539d89c37fa7f)
tegra124: move dp.c from tegra to tegra124
Reviewed-on: https://chromium-review.googlesource.com/175830
(cherry picked from commit e98be569b0ba7f4d565ce677343a317db08344e0)
tegra124: clean up tabbing; nyan: add a comment and setting to devicetree.cb
Reviewed-on: https://chromium-review.googlesource.com/175889
(cherry picked from commit 4e513196b0014c5a82079f3aa87c2efbeb645484)
tegra: get rid of struct members that are not used
Reviewed-on: https://chromium-review.googlesource.com/176023
(cherry picked from commit 032b8a0c9fe0152ebc27344e93128865ecb918a6)
tegra124: Increase SCLK (AVP) to 300MHz
Reviewed-on: https://chromium-review.googlesource.com/175489
(cherry picked from commit 7e082f2c2f030950d652f1f87f637e15dee38552)
tegra124: Address old main CPU starting review feedback.
Reviewed-on: https://chromium-review.googlesource.com/175933
(cherry picked from commit 1d76ac71bd839dff9198e65132ec25212dd55ffd)
tegra124: Revise clock source configuration for irregular peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176109
(cherry picked from commit 1021c215190602a2b8c1ab97d6c8313d89597d99)
nyan: add timestamps in romstage
Reviewed-on: https://chromium-review.googlesource.com/176172
(cherry picked from commit cd626aa10b56cd4da6ebda36fe487e44b08f3935)
tegra124: Allow enabling clock output for external peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176108
(cherry picked from commit ea9fb6393ee80da77c9fbc30f605859c7009c9ed)
nyan: Enable and configure clocks for I2S and audio codec.
Reviewed-on: https://chromium-review.googlesource.com/176104
(cherry picked from commit 1fb659b3e73285ff8218c0f229734edd3b979ca4)
tegra124: Fix typo in pinmux name.
Reviewed-on: https://chromium-review.googlesource.com/176215
(cherry picked from commit c7915ad41a3f1d1452aa6d6d287aaa8eb9e85c34)
nyan: Add pinmux settings for audio peripherals.
Reviewed-on: https://chromium-review.googlesource.com/176212
(cherry picked from commit 37412f3201590e47a06d4678fa833164d370b41c)
nyan: De-array-ify the PMIC setup code.
Reviewed-on: https://chromium-review.googlesource.com/176903
(cherry picked from commit 86ab1ce9fbf6d5362af1ee37de1394412366f247)
nyan: Add a kconfig for building for the original nyans in pixel cases.
Reviewed-on: https://chromium-review.googlesource.com/176904
(cherry picked from commit 1d05fd5bc40d727826510ec81496ce4a49e257ed)
nyan: Set the CPU voltage differently depending on which PMIC is in use.
Reviewed-on: https://chromium-review.googlesource.com/176905
(cherry picked from commit 31507f6a575220737ee5683b312cd162600f89cc)
nyan: Increase the CPU voltage to 1.2V.
Reviewed-on: https://chromium-review.googlesource.com/176906
(cherry picked from commit fe4795e66b515c2523df09a8800ecac9a3f63557)
tegra124: Flesh out/tidy up the flow controller constants.
Reviewed-on: https://chromium-review.googlesource.com/177085
(cherry picked from commit b50d315506a5ab9c81b6bbaf8cf580dbb3e78794)
tegra124: When leaving the bootblock/AVP, really stop the AVP.
Reviewed-on: https://chromium-review.googlesource.com/177086
(cherry picked from commit 06c10df889d4d935bc99792df860d93766ae44dd)
nyan: Set SPI4 speed to 33MHz
Reviewed-on: https://chromium-review.googlesource.com/177038
(cherry picked from commit c98de65482fabdb5c76944fe3bf762191b3a0a55)
nyan: Do console_init() in romstage
Reviewed-on: https://chromium-review.googlesource.com/176763
(cherry picked from commit 0bec32e09eab28bc5ea49b7896a8b6f489143b03)
nyan: Add a prompt to the CONFIG_NYAN_IN_A_PIXEL option.
Reviewed-on: https://chromium-review.googlesource.com/177486
(cherry picked from commit 7cbb801d000dac4b39f76266ebef2585fe48faba)
nyan: Separate the SDRAM BCT config for the two nyans, and turn down norrin.
Reviewed-on: https://chromium-review.googlesource.com/177487
(cherry picked from commit 6b119685f6626d79d924af9f856ebb90af45a73f)
tegra124: Bump up HCLK and PCLK
Reviewed-on: https://chromium-review.googlesource.com/177563
(cherry picked from commit c25337dac8c3ecdd8ffe5b4d11acebb216132405)
nyan: Add some code for reading the board ID.
Reviewed-on: https://chromium-review.googlesource.com/177488
(cherry picked from commit 5fccbce99e7db312e2e3caf806c438c9b04c0a8f)
nyan: Use the board ID to decide how to initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/177489
(cherry picked from commit 677bdb9df55248da3a0c6be0089098f6d6807d3c)
nyan: Create kconfig variables for each SDRAM config.
Reviewed-on: https://chromium-review.googlesource.com/177580
(cherry picked from commit d7ddcf262a321f06289c4f2b2a6b43982dd96377)
tegra124: Mux some unused pins away from UARTA, and pull up the serial RX line.
Reviewed-on: https://chromium-review.googlesource.com/177637
(cherry picked from commit bd533cc109b0acf3495b04fa6622e250ba454fe9)
tegra124: Initialize the MCR when setting up the UART.
Reviewed-on: https://chromium-review.googlesource.com/177638
(cherry picked from commit 38c84786fc3e8fab913aebca176ac7b038cb0be6)
tegra124: fix SPI AHB burst length
Reviewed-on: https://chromium-review.googlesource.com/177564
(cherry picked from commit f29235263202c9b4a3dbb65da5727c8eefe44315)
tegra124: remove unneeded debug print in SPI code
Reviewed-on: https://chromium-review.googlesource.com/177833
(cherry picked from commit 34a50040268dbde1c326d315f8042a3905ddfb06)
nyan: Set up the SOC and TPM reset pin.
Reviewed-on: https://chromium-review.googlesource.com/177965
(cherry picked from commit b81a5bd15a2979ee009b9f7bc4a39a304e6a759a)
tegra124: Allow some time for packets to appear in Rx FIFO
Reviewed-on: https://chromium-review.googlesource.com/177832
(cherry picked from commit 8f70a25b1eea865a448525749ac18393f5b9ad84)
nyan: PMIC: Slam default init values for SDOs/LDOs in AS3722
Reviewed-on: https://chromium-review.googlesource.com/178226
(cherry picked from commit c536b0d82fd6fffbc0e2448e0d19d3f06df5d86a)
nyan: change devicetree for the new display settings.
Reviewed-on: https://chromium-review.googlesource.com/177958
(cherry picked from commit 43abed730f222c8a685c250a58c981268994a65d)
nyan: Switch USB VBUS GPIOs from outputs to pulled-up inputs
Reviewed-on: https://chromium-review.googlesource.com/178914
(cherry picked from commit e47b6a609b9d23694a466b56960d9d14ca5d6242)
Tegra124: nyan: Disable VPR
Reviewed-on: https://chromium-review.googlesource.com/179327
(cherry picked from commit 441aa276446141f1b92ed8fb98c9578597487f4d)
tegra124: norrin: fix display issue
Reviewed-on: https://chromium-review.googlesource.com/179745
(cherry picked from commit c1c1ae69f6058ed901f532e2c532d1e6ba1f81fb)
tegra124: Add iRAM layout information.
Reviewed-on: https://chromium-review.googlesource.com/179814
(cherry picked from commit d00f135c93a52ad4dced2edecb74e2dfc54bb2fa)
tegra124: Run bootblock and ROM stage out of DRAM.
Reviewed-on: https://chromium-review.googlesource.com/179822
(cherry picked from commit 2d3ec06ec39a489d02e798bb22bce4d7465b20ce)
nyan: clean up a comment regarding video
Reviewed-on: https://chromium-review.googlesource.com/180161
(cherry picked from commit 03b5e88a66b9c96df2ef3d9ce5ba4a62a8bb2447)
tegra124: norrin: the first step to clean up display code
Reviewed-on: https://chromium-review.googlesource.com/180135
(cherry picked from commit 9d0c12dfef28a1161604df9b3fcc113049b2747d)
Squashed 49 commits for tegra124/nyan.
Change-Id: Id67bfee725e703d3e2d8ac17f40844dc193e901d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6883
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Tegra124: SDMMC: Configure base clock frequency.
Reviewed-on: https://chromium-review.googlesource.com/173841
(cherry picked from commit d3157e9a380cfb018cc69a1f23f277c3c5b680a6)
Tegra124: SDMMC: Configure pinmux for MMC 3/4.
Reviewed-on: https://chromium-review.googlesource.com/174011
(cherry picked from commit 55af9a86a56d6bc0ce9bcff4fd5226a60ae2033b)
tegra124: Move DMA-related #defines and definitions to header
Reviewed-on: https://chromium-review.googlesource.com/174444
(cherry picked from commit 9d917927a5b7151958289469b9049ac91efa41e3)
tegra124: Assign console address for kernel.
Reviewed-on: https://chromium-review.googlesource.com/174486
(cherry picked from commit 36e9370f30bd173879958d164156997841ec4e9c)
nyan: Fix up the gpio indices in chromeos.c.
Reviewed-on: https://chromium-review.googlesource.com/174418
(cherry picked from commit fba4ae1080c19f11abe1205b871ada14db996c61)
Nyan: turn on the backlight.
Reviewed-on: https://chromium-review.googlesource.com/174533
(cherry picked from commit 12649c9611981dd8d6567ba0238c8b8247c52215)
tegra124: Fix the disp1 source field.
Reviewed-on: https://chromium-review.googlesource.com/174701
(cherry picked from commit eed380e09075e1eef0bde7d1bb15c4343f30bfe0)
nyan: set up the aux channel i2c interface
Reviewed-on: https://chromium-review.googlesource.com/174620
(cherry picked from commit ea81cb44a1c11cd78643c69ac818304cd393749e)
tegra124: fix typos in the clock code.
Reviewed-on: https://chromium-review.googlesource.com/174684
(cherry picked from commit 72365c33693db4eb6e01032938221f592b7e5a02)
tegra124: Revamp clock source/divisor configuration
Reviewed-on: https://chromium-review.googlesource.com/174804
(cherry picked from commit 3f31a634f69595bcc6a473301d1492c97a767809)
tegra: Add gpio_output_open_drain() function
Reviewed-on: https://chromium-review.googlesource.com/174650
(cherry picked from commit bc1c28926810e722e9b82339ea0585d083e3fa8c)
tegra124: add nvidia-generated files
Reviewed-on: https://chromium-review.googlesource.com/174610
(cherry picked from commit 7706f3200f7fc11b7a443f336bff6a37afa94652)
nyan: Ignore the dev mode GPIO.
Reviewed-on: https://chromium-review.googlesource.com/174837
(cherry picked from commit 9513e608f3063fdb3e9d8bd04e6e5fe35a5bfcee)
Tegra124: Add support for the ARM architectural timer.
Reviewed-on: https://chromium-review.googlesource.com/174835
(cherry picked from commit 25a91fcf7e79cc450caa59bc6b65f954bb96ac6c)
nyan: Initialize the ARM architectural timer in the RAM stage.
Reviewed-on: https://chromium-review.googlesource.com/174836
(cherry picked from commit 581f592c12de91c0cf8279ede2850e38dd0cd2e8)
tegra124: nyan: Move mainboard level clock stuff into the mainboard source.
Reviewed-on: https://chromium-review.googlesource.com/174843
(cherry picked from commit 5ab100b0bad22814261f9b755b59394562c9145a)
tegra124: add some explanatory text about U7.1 computations.
Reviewed-on: https://chromium-review.googlesource.com/173910
(cherry picked from commit 822cad0ceeceeb5160c8216e05eec13fd04a6413)
Set the EC SPI clock source to PLLP and divide down to around 5MHz
Reviewed-on: https://chromium-review.googlesource.com/173954
(cherry picked from commit c0e22d76d3887ca1f727443a47db38dec12c0b74)
nyan: Move non-essential configuration out of bootblock and into ram stage.
Reviewed-on: https://chromium-review.googlesource.com/174844
(cherry picked from commit dad7f68c76f7b83edacd8b22c9dbd3f0ff027397)
tegra124: clocks: Save some IOs in clock_enable_clear_reset.
Reviewed-on: https://chromium-review.googlesource.com/174845
(cherry picked from commit 81b977a2758d42471667e2cbe31f160dfda5bca4)
tegra124: re-write SPI driver w/ full duplex support
Reviewed-on: https://chromium-review.googlesource.com/174446
(cherry picked from commit 51c9a34240d6a068780a7d1c27b032b56b2d3e54)
tegra124: move SPI-related structures from .c to .h
Reviewed-on: https://chromium-review.googlesource.com/174637
(cherry picked from commit 36760a4463c2c33f494ca7ea5a36810fa4502058)
tegra124: add frame header info to SPI channel struct
Reviewed-on: https://chromium-review.googlesource.com/174638
(cherry picked from commit e24773eb946e2c4cb5e828f055d45d92bd1a4f9f)
tegra124: re-factor tegra_spi_init()
Reviewed-on: https://chromium-review.googlesource.com/174639
(cherry picked from commit 88354b996459a702c36604f5f92c24e63df8de7e)
nyan: Set CrOS EC frame header parameters for SPI
Reviewed-on: https://chromium-review.googlesource.com/174710
(cherry picked from commit 29173ba5863eebb2864a8384435cde2f0d5ca233)
tegra124: Add Rx frame header support to SPI code
Reviewed-on: https://chromium-review.googlesource.com/174711
(cherry picked from commit 1d1630e770804649ef74d31db194d3bde9968832)
tegra124: add support for the Serial Output Resource (sor)
Reviewed-on: https://chromium-review.googlesource.com/174612
(cherry picked from commit 3eebd10afea4498380582e04560af89126911ed9)
nyan: tegra124: Enable I, D and L2 caches in romstage.
Reviewed-on: https://chromium-review.googlesource.com/173777
(cherry picked from commit 74512b7ecfbd50f01a25677307084699ee8c6007)
tegra and tegra124: Bring up graphics
Reviewed-on: https://chromium-review.googlesource.com/174613
(cherry picked from commit 7e944208a176cdac44a31e2a9961c8bd5dc4ece8)
nyan: Move the DMA memory region.
Reviewed-on: https://chromium-review.googlesource.com/174953
(cherry picked from commit c66e22859252eaebceb07a3118ac61f4cf6289eb)
tegra124: Increase CBFS cache buffer size
Reviewed-on: https://chromium-review.googlesource.com/174950
(cherry picked from commit 6dbb4e5f0d66c68df45ac73e3f223b856b715026)
tegra124: Add USB PLL, PHY and EHCI setup code
Reviewed-on: https://chromium-review.googlesource.com/174651
(cherry picked from commit ecd5c398ff6748a7d40089019471357b58d3a6ea)
tegra124: add in some undocument clock source and PLL registers
Reviewed-on: https://chromium-review.googlesource.com/174948
(cherry picked from commit 73fcc4981da6e4415b514eaafb42bc265ab0cd9a)
tegra124: small cleanups of the code
Reviewed-on: https://chromium-review.googlesource.com/174995
(cherry picked from commit 7256aba07e9567ef8d73f05e1f80c4d45fd57bda)
Squashed 34 commits for tegra124 / nyan support.
Change-Id: I050c7ad962e0d24550b0b33c9318e89c80d01f00
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6870
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
|
|
nyan: Clock setup.
Reviewed-on: https://chromium-review.googlesource.com/172106
(cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1)
tegra124: Call into the mainboard bootblock init if one exists.
Reviewed-on: https://chromium-review.googlesource.com/172581
(cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec)
nyan: Add a mainboard specific bootblock.
Reviewed-on: https://chromium-review.googlesource.com/172582
(cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69)
nyan: tegra124: Redestribute the clock code between the mainboard and soc.
Reviewed-on: https://chromium-review.googlesource.com/172583
(cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b)
nyan: Initialize the i2c pins and controllers.
Reviewed-on: https://chromium-review.googlesource.com/172584
(cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8)
nyan: Initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/172585
(cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a)
tegra124: add a chip.h and use it in NYAN
Reviewed-on: https://chromium-review.googlesource.com/172773
(cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f)
tegra: Reorder GPIO register accesses to avoid glitching
Reviewed-on: https://chromium-review.googlesource.com/172730
(cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5)
tegra: Turn GPIO wrappers into macros to make them easier to write
Reviewed-on: https://chromium-review.googlesource.com/172731
(cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c)
tegra: Change GPIO functions to allow variable arguments
Reviewed-on: https://chromium-review.googlesource.com/172916
(cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d)
tegra124: Implement starting up the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/172917
(cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3)
tegra: Simplify the I2C constants.
Reviewed-on: https://chromium-review.googlesource.com/172953
(cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76)
tegra124: Fix SPI base addresses
Reviewed-on: https://chromium-review.googlesource.com/173322
(cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357)
tegra124: Scrub the clock constants.
Reviewed-on: https://chromium-review.googlesource.com/172954
(cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4)
tegra124: add DMA support
Reviewed-on: https://chromium-review.googlesource.com/172951
(cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8)
tegra124: add basic SPI driver
Reviewed-on: https://chromium-review.googlesource.com/172952
(cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429)
tegra124: Add an assembly stub which is run first on the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/173541
(cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de)
nyan: tegra124: Set up dynamic cbmem.
Reviewed-on: https://chromium-review.googlesource.com/173542
(cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f)
tegra124: Add an soc.c which sets up the chip operations and memory resource.
Reviewed-on: https://chromium-review.googlesource.com/173543
(cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4)
tegra124: extend chip.h to include video settings
Reviewed-on: https://chromium-review.googlesource.com/173600
(cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29)
tegra124 and nyan: fill in the devicetree a bit more, add defines
Reviewed-on: https://chromium-review.googlesource.com/173684
(cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147)
tegra124: clean-ups for SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173599
(cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7)
tegra124: add a #define for DMA alignment size
Reviewed-on: https://chromium-review.googlesource.com/173638
(cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af)
tegra124: Add FIFO transmit functions to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173639
(cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7)
tegra124: clean-ups for DMA driver
Reviewed-on: https://chromium-review.googlesource.com/173598
(cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0)
tegra124: early display and display code.
Reviewed-on: https://chromium-review.googlesource.com/173622
(cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558)
tegra124: Move transfer size handling to spi_xfer()
Reviewed-on: https://chromium-review.googlesource.com/173680
(cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621)
tegra124: strict error detection and reporting for SPI
Reviewed-on: https://chromium-review.googlesource.com/173681
(cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010)
tegra124: add thread-friendly delays to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173648
(cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e)
Tegra124: Take the SPI1 controller out of reset and enable its clock.
Reviewed-on: https://chromium-review.googlesource.com/173787
(cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2)
tegra124: add two more clock setting values
Reviewed-on: https://chromium-review.googlesource.com/173772
(cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57)
nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC.
Reviewed-on: https://chromium-review.googlesource.com/173788
(cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8)
tegra124: Add some stub functions to the Tegra SPI driver.
Reviewed-on: https://chromium-review.googlesource.com/173789
(cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2)
tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS.
Reviewed-on: https://chromium-review.googlesource.com/173790
(cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084)
nyan: Implement the code which reads GPIOs for ChromeOS.
Reviewed-on: https://chromium-review.googlesource.com/173791
(cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3)
nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options.
Reviewed-on: https://chromium-review.googlesource.com/173792
(cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e)
Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks.
Reviewed-on: https://chromium-review.googlesource.com/173793
(cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88)
tegra124: fix clear_fifo_status() in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173738
(cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f)
ARM: Include stdint.h in cpu.h.
Reviewed-on: https://chromium-review.googlesource.com/173774
(cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6)
tegra124: When setting up the main CPU, set its CPSR appropriately.
Reviewed-on: https://chromium-review.googlesource.com/173775
(cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead)
tegra124: fix wrong names in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/173955
(cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d)
tegra124: Fix up the PLLX divider table.
Reviewed-on: https://chromium-review.googlesource.com/173778
(cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17)
tegra124: clock: Get rid of cpcon and dccon.
Reviewed-on: https://chromium-review.googlesource.com/173779
(cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7)
Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus.
Reviewed-on: https://chromium-review.googlesource.com/173953
(cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355)
armv7: expose dcache_line_bytes() in cache API
Reviewed-on: https://chromium-review.googlesource.com/173975
(cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12)
libpayload: expose dcache_line_bytes() in ARM cache API
Reviewed-on: https://chromium-review.googlesource.com/174099
(cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9)
armv4: add a stub for dcache_line_bytes()
Reviewed-on: https://chromium-review.googlesource.com/173976
(cherry picked from commit 924f61ea895b9268c716791466637009bbac6469)
tegra124: Base early UART on CLK_M to enable debugging of PLL init code
Reviewed-on: https://chromium-review.googlesource.com/174339
(cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa)
tegra124: Add additional PLLs and redesign the divisor table
Reviewed-on: https://chromium-review.googlesource.com/174380
(cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384)
Squashed 49 commits for tegra124/nyan that included a lot of churn on
different pieces.
Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6869
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The bootblock and romstage UART consoles were being built in based only on
whether or not the bootblock and romstage consoles were selected, ignoring
whether serial console support was compiled in generally.
Change-Id: I3866519c422a990c44ced66885108eff24894563
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172580
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a4f2dd4902a05884693e6e350b6be29276d16981)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6862
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins for the UART had been configured manually using hardcoded offsets and
values. Now that we have pinmux functions for that sort of thing, we should
use that instead. This also provides a very simple test for the pinmux code.
Ultimately this code should be wrapped in a function which handles setting up
any of the UARTs which is appropriately parameterized and which would be
called from the bootblock main instead of being in it, but for now this is
sufficient.
Old-Change-Id: I69e36fa5fc9b6f3f5ef7f1be3e9f18cdbfdd7fe9
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171807
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d29e655b68143e86199ab1d74f89e125b16b67cc)
tegra124: Call the set_avp_clock_to_clkm function in the bootblock.
We had a hardcoded version of the set_avp_clock_to_clkm function in the
bootblock, and we had to use it until now because the real version uses
udelay, and until now that hadn't been implemented. Also, replace the delay
loop in the hacky_hardcoded_uart_setup_function with a call to the real thing.
Old-Change-Id: I6df9421bcad484e0855c67649683d474d78e4883
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172045
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4c6dd4c7cade7d922a258e0371e43972bce77249)
Squashed two tegra124 bootblock related commits.
Change-Id: I0ce6321a04b11b7f1250ef3816fe46732777988d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6861
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Add rules for building the nvidia-cbootimage utility and add dependencies
to the tegra124 platform.
Change-Id: Ia9f26981bccd217fe79e1b5dd432ee7da868d22a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6851
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This just updates a comment which refers to "board_init_f". We use
bootblock main() in coreboot.
Change-Id: I4cb6b3c11f163b67fe48de495d13dce88710efc0
Reviewed-on: https://chromium-review.googlesource.com/172095
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 65139f29682cedca8dfb58b3dfe67eab64299064)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6791
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
The bootblock for the tegra124 runs on the AVP coprocessor which uses the
ARMv4 architecture. Switch it over to that architecture.
Change-Id: Ie527bbff938e6148c58727d448f9c2e6862da872
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171402
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c1aa76b7607ee40ff848628971a97eea5393aebe)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6784
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I73a8e56559c7ffdaab39a5c19311221c91565004
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
tegra124: Add a test function which spams exclamation points on the UART.
This function spews characters on the console and, until we have a working
console, is an easy way to see whether the system boots to a particular point.
For some reason waiting for transmitter to be empty hangs, but transmitting
characters still works.
Old-Change-Id: I1622c8a58849f4b8bdcaa67500b81042d7346df4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171030
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e0059181958cfe8afec2f3a7ea732e81f5d55e5d)
tegra124: Re-enable waiting for the transmitter to empty in the test function.
The compiler was emitting code compatible with armv7-a, but the bootblock was
running on a core which uses armv4t. By coincidence, it was emitting an
instruction which is unavailable on armv4t when checking the value of the
UART's LSR register. Now that the bootblock is compiled with more appropriate
flags, this code can be re-introduced.
Old-Change-Id: I7ecada4138b0889b963d1a8b19a4bab8e0bb1add
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170997
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a0adceb5029c8ee633d17c82dbb11e48d30349d)
tegra124: Seperate out the non-UART specific hardcoded init in the bootblock.
The hardcoded init in the test function in the bootblock is actually useful
generally because it doesn't belong in the UART driver itself but is necessary
for the UART to work. Until we have real implementations for the pinmux, etc.,
we can use that code to get the UART and console going.
Old-Change-Id: I2efe0b571d8b022eb2a2e5569620558540b28373
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171334
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ae7d4d890be1936cc86dc15adeb33f3b46a51ae5)
tegra124: Implement and enable serial console support for tegra124.
The driver is very similar to the 8250 driver, except it isn't in two parts,
and it also spaces its registers 4 bytes apart instead of having them directly
adjacent to each other.
Also, eliminate the UART test function in the bootblock. It's no longer needed
since the actual console output serves the same purpose.
Right now the clock divisor is fixed for now, and we'll want to actually
figure out what value to use at some point.
Old-Change-Id: Idd659222901eb76b0ed8cbb986deb5124096f2f6
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171337
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 86f5e2875b18901b349283cfbcd4f8cc88b7a019)
Squashed 4 commits related to uart support for tegra124. Modified the
new uart.c to look like the uart.c for exynos5420.
Change-Id: I490cba014a43d58c30c48ca9ddcae2b00095b7a6
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6764
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This implementation is the same as the general one except that it removes all
the things that don't work on an ARMv4.
Change-Id: I1108a79cc656b26f7d48df20aef3016cf5ae3182
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171019
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d1436288d3b025af27a8d28ba94b589940ead504)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6713
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The ARM Makefile was copied from x86 and then modified, and as a result it
was carrying a lot of baggage. On top of that, the extra complication made it
inflexible, and we need a lot of flexiblity in order to support the fact that
the Tegra124 starts on an ARMv4 coprocessor instead of one of the ARMv7 main
CPUs.
Change-Id: Ia6ddc27619bdb51e152ad0c628ad6f3037c103ce
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171017
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 512d942788336c8d52470135b43ee4e6a1c95f6c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6709
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This uses the packet mode of the controller since that allows transfering more
data at a time.
Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172402
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6703
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins on tegra are controlled by three different units, the pinmux, the
pin group controls, and the GPIO banks. Each of these units controls some
aspect of the pins, and they layer together and interact in interesting ways.
By default, the GPIOs are configured to pass through the special purpose IO
that the pinmux is configured to and so can be ignored unless a GPIO is needed.
The pinmux controls which special purpose signal passes through, along with
pull ups, downs, and whether the output is tristated. The pingroup controls
change the parameters of a group of pins which all have to do with a related
function unit.
The enum which holds constants related to the pinmux is relatively involved
and may not be entirely complete or correct due to slightly inconsistent,
incomplete, or missing documentation related to the pinmux. Considerable
effort has been made to make it as accurate as possible. It includes a
constant which is the index into the pinmux control registers for that pin,
what each of the functions supported by that pin are, and which GPIO it
corresponds to. The GPIO constant is named after the GPIO and is the pinmux
register index for the pin for that GPIO. That way, when you need to turn on
a GPIO, you can use that constant along with the pinmux manipulating functions
to enable its tristate and pull up/down mode in addition to setting up the
GPIO controls.
Also, while in general I prefer not to use macros or the preprocessor when
writing C code, in this case the set of constants in the enums was too large
and cumbersome to manage without them. Since they're being used to construct
a table in a straightforward way, hopefully their negative aspects will be
minimized.
In addition to the low level functions in each driver, the GPIO code also
includes some high level functions to set up input or output GPIOs since that
will probably be a very common thing to want to do.
Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171806
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a)
tegra124: Add base address for the pinmux and pingroup registers.
There weren't any constants for the pinmux or pingroup registers in the
address map header.
Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62)
Squashed two related commits.
Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6702
Tested-by: build bot (Jenkins)
|
|
If these aren't set, the rom and ram stages will attempt to load at address
zero which doesn't work.
Change-Id: I0b9b37d6363e6b208248d8a1af6ebee4db602486
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/173540
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 6ac5cea39d423bfcf5bbd53c2cc6228ab89f08b2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6704
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
A problem with including the tegra124 directory directly in the include path
is that it makes all headers in that directory first level headers available
everywhere including places that have nothing to do with the SOC, even headers
which were only intended for local use by tegra124 code. This change modifies
things a bit to be more like the way the arch headers are chosen. In the
tegra124 directory, there's an include directory which has an soc subdirectory
in it. That include directory is added to the include path, making it possible
to have headers private to the tegra124. When files specific to whatever tegra
is being built for are needed, you can include <soc/foo.h> and get the version
specific to that particular soc.
Also, the soc.h header file was overhauled to use enums instead of defines, to
consistently name things as far as their prefix (the less cryptic TEGRA instead
of NV_PA) and suffixes like "BASE", and to get rid of values which were
specific to U-Boot which we don't need. Since the only thing in the file were
address constants, I also renamed the file addressmap.h. It would be included
as:
<soc/addressmap.h>
which I think is easy to remember, does what you'd think it does from the
name, and won't conflict with other header files just minding their own
business in some other directory.
Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172080
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6659
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The initial commit for tegra124 (396b072) was not updated for the new ARCH settings.
Change-Id: I147bdf289e91031bd0c0a61e6da43e9c1a438f84
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6658
Tested-by: build bot (Jenkins)
|
|
This change shows the source structure for nvidia Tegra and Tegra124
SOC. The problem we are trying to solve is that there is a large
amount of common code in the form of .c and .h files across many
different Tegra SOCs. The solution is to provide common code in a
single directory, but not to compile in the common code directory;
rather, we compile in a directory for a given SOC. Different SOCs
will sometimes need different bits of code from the common directory.
Tegra common code lives in tegra/, but there is no makefile there: if
a Tegra common file is needed in a SOC, it is referenced via a
Makefile in a specific Tegra SOC.
Another issue is includes. Include files in the common directory might be
accessed by a piece of code in an SOC directory. More problematically,
code in the common directory might require a file in an SOC directory.
We don't want to put the SOC name in an #include path, e.g.
in a C file in tegra/ is very undesirable, since we might be compiling
for a tegra114.
On some systems this is solved by a pre-pass which creates a set of
symbolic links; on others with nested #ifdef in the common code
which include different .h files depending on CPP variables.
In previous years, both LinuxBIOS and coreboot have tried these
solutions and found them inconvenient and error-prone.
We choose to solve it by requiring explicit naming of part of the path
of files that are in the common directory. This requirement, coupled
with two -I directives in the Makefile.inc, allows common and SOC
C code to incorporate both common and SOC .h files.
.c and .h files -- SOC or common -- name include
files in the common directory with the prefix tegra/, e.g.
SOC files will be included from the SOC directory if they have no prefix:
The full patch of clock.h will depend on what SOC is being compiled, which
is desirable.
In this way, a common file can pick up a specific SOC file without
creating symlinks or other such tricky magic.
We show this usage with one file, soc/nvidia/tega124/clock.c. This compiles.
The last question is where to put the prototype for the function
defined in this file -- soc.h?
Change-Id: Iecb635cec70f24a5b3e18caeda09d04a00d29409
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/171569
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 53e3bed868953f3da588ec90661d316a6482e27e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6621
Tested-by: build bot (Jenkins)
|
|
It turns out there's a register in tegra which automatically counts at 1us
increments. It's primarily intended for hardware to use (I think to drive
other timers) but we can read it ourselves since a 1us timer is exactly what
we need to support the monotonic timer API.
Change-Id: I68e947944acec7b460e61f42dbb325643a9739e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172044
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 161a39c53404ea0125221bbd54e54996967d6855)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6620
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Otherwise the stack ends up down at 0 and has 0 bytes.
Change-Id: I0e3c80a0c5b0180d95819ab44829c2a0b527a54d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171015
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3e69a477474697bcbc40762ec166e8a515d8b0c2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6619
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These rules slip into the normal bootblock preperation process and use the
cbootimage utility to wrap it in a BCT.
Change-Id: I8cf2a3fb6e9f1d792d536c533d4813acfb550cea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170924
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cf4a9b0712c21b885bb59310671fb87e38abb665)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6618
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Most things still needs to be filled in, but this will allow us to build
boards which use this SOC.
Change-Id: Ic790685a78193ccb223f4d9355bd3db57812af39
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170836
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 462456fd00164c10c80eff72240226a04445fe60)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6431
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
