summaryrefslogtreecommitdiff
path: root/src/soc/rockchip
AgeCommit message (Collapse)Author
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
Refactor the mipi driver, so we can support dual mipi panel. And pass the panel data from mainboard.c, that we can support different panel with different board. Change-Id: Id1286c0ccbe50c89514c8daee66439116d3f1ca4 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: properly configure PHY timingLin Huang
These values are specified as constant time periods but the PHY configuration is in terms of the current lane byte clock so using constant values guarantees that the timings will be outside the specification with some display configurations. Derive the necessary configuration from the byte clock in order to ensure that the PHY configuration is correct. Change-Id: I396029956730907a33babe39c6a171f2fcea9dcd Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: improve mipi transfer flowLin Huang
check GEN_CMD_FULL status before transfer, check GEN_CMD_EMPTY and GEN_PLD_W_EMPTY status after transfer. Change-Id: I936c0d888b10f13141519f95ac7bcae3e15e95d9 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct Feedback divider settingLin Huang
This patch correct Feedback divider setting: 1. Due to the use of a "by 2 pre-scaler," the range of the feedback multiplication Feedback divider is limited to even division numbers, and Feedback divider must be greater than 12, less than 1000. 2. Make the previously configured Feedback divider(LSB) factors effective Change-Id: Ic7c5c59be1d00c65c3b17cb3c4bfba8d7459e960 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: correct phy parameter settingLin Huang
As MIPI PHY document show, icpctrl<3..0> and lpfctrl<5..0> should depend on frequency, so fix it. Change-Id: Ic4a90767bd1f22d5d784d4013dc7afb3149115c1 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-11-28rockchip/rk3399: mipi: Fix LOOP_DIV_HIGH_SEL to be 4 bits wideLin Huang
Accroding to datasheet, feedback divider register high value is only 4 bit, it currently uses 5 bit, so correct it. Change-Id: I1fe9fc076b712f27407c5f2735b15e64fb55e72e Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/22478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-10-23soc: Add Kconfig for each soc vendorChris Ching
Allows explicit ordering for vendors that share a common configuration that must be sourced last. The issue is that chips in soc/{amd,intel}/[ab].* will be able to override defaults set in this file, but Kconfig files that get sourced later (soc/amd/[d-z].*) will NOT be able to override these defaults. Note: intel and amd soc chips now need to be added manually to the new Kconfig file BUG=b:62235314 TEST=make lint-stable Change-Id: Ida82ef184712e092aec1381a47aa1b54b74ed6b6 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-08-06rockchip: gpio: Correct rk3399 pmu gpio pull settingLin Huang
Starting with RK3399, PMUGPIO pull registers use the same write mask format as normal GRF registers, so they need to use RK_CLRSETBITS() rather than clrsetbits_le32(). BRANCH=None BUG=None TEST=boot from scarlet Change-Id: Ibe391273d58ab35df993e149187d67497fcf2acc Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
some gpio irq need to set input pull initialization status to guarantee to get the right irq trigger. let's add this argument in gpio_input_irq() function BRANCH=None BUG=None TEST=boot from bob Change-Id: I9b8e6497f07146dafdb447a6ea10d039a2a2fa33 Signed-off-by: Lin Huang <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/20866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
Our structure packing for Rockchip's gpio_t was chosen arbitrarily. ARM Trusted Firmware has since become a thing and chosen a slightly different way to represent GPIOs in a 32-bit word. Let's align our format to them so we don't need to remember to convert the values every time we pass them through. CQ-DEPEND=CL:572228 Change-Id: I9ce33da28ee8a34d2d944bee010d8bfc06fe879b Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/20586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-26rockchip/rk3399: update the ddr 200MHz frequency configurationCaesar Wang
This patch updates the coreboot DDR Settings to match the configuration used by ARM-Trusted-Firmware. Change-Id: I34bc2950a9708ac89a5637bf682551e03d993fcc Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/20304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
The differential signal of DQS needs to keep low level before gate training. RPULL will connect 4Kn from PADP to VSS and a 4Kn from PADN to VDDQ to ensure it. But if it has PHY side ODT connected at this time, it will change the DQS signal level. So it needs to disable PHY side ODT when doing gate training. BRANCH=None BUG=None TEST=boot from bob Change-Id: I56ace8375067aa0bb54d558bc28172b431b92ca5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: cb024042c7297a6b17c41cf650990cd342b1376f Original-Change-Id: I33cf743c3793a2765a21e5121ce7351410b9e19d Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/448278 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/18582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
MAINBOARD_FORCE_NATIVE_VGA_INIT is to be selected instead of the user option MAINBOARD_DO_NATIVE_VGA_INIT. The distinction is necessary to use the latter in a choice. Change-Id: I689aa5cadea9e1091180fd38b1dc093c6938d69c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-26rockchip/rk3399: fix rk_mipi_dsi_phy_init errNickey Yang
This patch fix rk_mipi_dsi_phy_init error return. Change-Id: Ie260975ad6ed26c37aa8bb65dfcef4db2407a2da Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-24rk3399: Reshuffle memlayout to move PRERAM_CBMEM_CONSOLE further backJulius Werner
It seems that the BootROM on the RK3399 overwrites some of the earlier parts of SRAM, including the PRERAM_CBMEM_CONSOLE area. Now that we have a persistent CBMEM console we want that area to survive in case of an early (pre-CBMEM) reboot, so shuffle the layout around a bit to move it further back. (This reduces the stack size to 12KB which should still be way more than enough.) Change-Id: Ifc1e568cda334394134bba9eba75088032d2ff13 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-24soc/rockchip: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I66b1b9635ece2381f62f2a9d6f5744d639d59163 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-18rockchip/rk3399: soc: resize reserve memoryXing Zheng
Reserve the whole TZRAM area because it will be marked as secure-only by BL31 and can not be accessed by the non-secure kernel. CQ-DEPEND=CL:452659 BUG=chrome-os-partner:57361 BRANCH=firmware-gru-8785.B TEST=the reserve memory is resized Change-Id: Ie3ab39598f3f7cb96feb0c574e230e7fcb53a1a4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f34d254e1dfc9ae95a784aba22503e75a2fa65f1 Original-Change-Id: I39c4cb530f41a7b0f7f3064125072dd85b62276f Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/418102 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-(cherry picked from commit ea9fe064a9b1e1ce81fca74f829a0fb6e78ce426) Original-Reviewed-on: https://chromium-review.googlesource.com/452640 Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18rockchip/rk3399: Add MIPI driverNickey Yang
This patch configures clock for mipi and then adds mipi driver for support innolux-p079zca mipi panel in rk3399 scarlet. Change-Id: I02475eefb187c619c614b1cd20e97074bc8d917f Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-18rockchip/rk3399: remove the delay for enabling SSCCaesar Wang
The hang was caused by deasserting the reset before, it had been delayed 20us fixing the hang issue. So we can remove this delay for now. Change-Id: I5545377b72eb20b59ceaaca25c78965854bfb919 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
Spread Spectrum Modulator (SSMOD) is a fully-digital circuit used to modulate the frequency of the Silicon Creations’ Fractional PLL in order to reduce EMI. We need to turn the DPLL spread spectrum feature on to reduce the EMI noise for DDR on bob. Change-Id: I75461d4235bcf55324e6664a1220754e770b4786 Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-on: https://review.coreboot.org/19557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
Board Scarlet doesn't use usbphy1. BUG=b:37685249 TEST=boot Scarlet, check the firmware log, and confirm no errors about USB1 Change-Id: I66e0d8a235cc9057964f7abca32bc692d41e88fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/19489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-03lib/edid.c: Differentiate between absent and non-conformant EDIDArthur Heymans
Change-Id: Id90aa210ff72092c4ab638a7bafb82bd11889bdc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-28rockchip: gpio: add gpio_input_irq & gpio_irq_statusJeffy Chen
BUG=b:35647967 TEST=boot from bob Change-Id: I5de902ab26fe768b641f69d85a5294baf6d916e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 223257d486b026c06a1f3a7a830b829efb9932dc Original-Change-Id: I055ad5f59285cee3110d1e7cb1a53a60144712e4 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/452285 Original-Commit-Ready: Caesar Wang <wxt@rock-chips.com> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19433 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-03-28Remove libverstage as separate library and source file classJulius Werner
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are linked directly into the bootblock or the romstage. However, they're still compiled with a separate "libverstage" source file class, linked into an intermediate library and then linked into the final destination stage. There is no obvious benefit to doing it this way and it's unclear why it was chosen in the first place... there are, however, obvious disadvantages: it can result in code that is used by both libverstage and the host stage to occur twice in the output binary. It also means that libverstage files have their separate compiler flags that are not necessarily aligned with the host stage, which can lead to weird effects like <rules.h> macros not being set the way you would expect. In fact, VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86 because their libverstage code that gets compiled into the romstage sets ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to run pre-migration. This patch resolves these problems by removing the separate library. There is no more difference between the 'verstage' and 'libverstage' classes, and the source files added to them are just treated the same way a bootblock or romstage source files in configurations where the verstage is linked into either of these respective stages (allowing for the normal object code deduplication and causing those files to be compiled with the same flags as the host stage's files). Tested this whole series by booting a Kevin, an Elm (both with and without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode. Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18302 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
This patch attempts to finish the separation between CONFIG_VBOOT and CONFIG_CHROMEOS by moving the remaining options and code (including image generation code for things like FWID and GBB flags, which are intrinsic to vboot itself) from src/vendorcode/google/chromeos to src/vboot. Also taking this opportunity to namespace all VBOOT Kconfig options, and clean up menuconfig visibility for them (i.e. some options were visible even though they were tied to the hardware while others were invisible even though it might make sense to change them). CQ-DEPEND=CL:459088 Change-Id: I3e2e31150ebf5a96b6fe507ebeb53a41ecf88122 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18984 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
It may cause an edp aux transfer error if the edp pclk is set too high, so reduce it to 25MHz. BUG=chrome-os-partner:60130 BRANCH=None TEST=Build and Boot Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596 Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/429410 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13rockchip/rk3288: rtc-rk808: fix rtc time reading issueJeffy Chen
After we set the GET_TIME bit, the rtc time can't be read immediately. We should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading RTC time will return a old time. BUG=chrome-os-partner:61078 BRANCH=veyron TEST=Build and Boot Original-Change-Id: I6ec07fc6c4d6d8b27b12031423b86b8ab15da6f6 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/423272 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I9806b624d6e968e51d52aab8c052ae3fa77f247d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b708e29fbae0d8f5a2cece79711aa6b1887727 Original-Change-Id: I8c168c14437bb932a59ac0e91a01062df0cf11dc Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/427522 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18127 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-123rdparty: update arm-trusted-firmware submoduleMartin Roth
Updated to arm-trusted-firmware TOT: 236c27d2 (Merge pull request #805 from Xilinx/zynqmp/addr_space_size) 183 commits between Sep 20, 2016 and January 10, 2017 - Also add associated change to src/soc/rockship/rk3399 Makefile.inc that is required to build the M0 Firmware. Change-Id: I49695f3287a742cd1fb603b890d124f60788f88f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18024 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-01-03rockchip/common: Loosen I2C frequency target requirementsJulius Werner
I've recently added an assertion to ensure that the effective I2C frequency on Rockchip SoCs is not too far off the 400KHz target due to divisor rounding errors. A 10KHz margin worked fine for RK3399, but it turns out that RK3288 actually only ever hit 387KHz since its I2C clocks are based off the already pretty low 75MHz PCLKs. While we could probably change the PCLKs to make this closer, that seems like a too intrusive change for something that has already worked just fine for years, so just loosen the restriction a little more instead. BRANCH=None BUG=chromium:675043 TEST=None Change-Id: I7e96a1a75b38f8ad3971dd33046699cceb17b80d Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/421095 Reviewed-by: Randall Spangler <rspangler@chromium.org> Reviewed-on: https://review.coreboot.org/18007 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-13rockchip: rk3399: change emmc clk to 148.5MHzZiyuan Xu
Set aclk_emmc and clk_emmc to 148.5MHz under hs400es mode, which could improve stability like kernel. CQ-DEPEND=CL:386527 BUG=chrome-os-partner:54377 BRANCH=none TEST=build and boot on kevin Change-Id: Iaa76d3ec1ab999eb317a9ab6c7e3525594b15b57 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e6eb1f56371aea51f2584a97bf817189d61090b2 Original-Change-Id: If4754d22e83a0f9a029fedca12f26ff5ae8d44e1 Original-Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386865 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17790 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
We may support different sdram sizes on one board in future, so we need to calculate sdram sizes from sdram drvier. BRANCH=None BUG=None TEST=boot kevin Change-Id: I43e8f164ecdb768c051464b4dbc7d890df8055d0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c4d8b3cb647b2f9cebc416c298817c16d49330e Original-Change-Id: I95d5ef34de9d79ebca3600dc7a4b9e14449606ff Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411600 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-05rockchip/rk3399: display: Update edp initialization retryMartin Roth
Follow on patch to clean up the previous retry code. Previous patches: coreboot commit 079b5c65 (rockchip/rk3399: display: Retry edp initialization if it fails) cros commit 28c57a6e (rockchip/rk3399: display: retry edp initialization if edp initial fail) - Reduce the jumping around via goto statements - Break the retry code out into a separate function that also prints the error messages. BRANCH=gru BUG=chrome-os-partner:60150 TEST=Rebuild Kevin and Gru Change-Id: I3b6cf572073e4dcac83da09621bafde179af2613 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17642 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03rockchip/rk3399: Fix typoPatrick Georgi
TRAINING, not TARINING. BUG=none BRANCH=none TEST=still builds Change-Id: I8b7ffd0f0544a58865865a8b09d9c153db9c2674 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b1ea846ce1ffd654d7d34c2a1d43b0fddbd4ae32 Original-Change-Id: I4940279ed7217cc20fe29c8b3603d1853acbfc5e Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411801 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17677 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-29rockchip/rk3399: display: Retry edp initialization if it failsLin Huang
We found that sometimes the edp doesn't get the edid or that video config fails on kevin after a reboot. Now we will retry 3 times to initialize it if there are errors. BRANCH=gru BUG=chrome-os-partner:60150 TEST=reboot kevin, the edp initialization error is no longer seen. Change-Id: I96e20e526294fbc856fbdffcbd63accdc7371ef6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 28c57a6e5b89c7b3a96204ec19a080067460544a Original-Change-Id: I1382cdf4119fc4eeae5c2b36485030e3a38c2d91 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/412622 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-17rockchip/rk3399: Change 933 DPLL to low jitter rateDerek Basehore
This changes the 933 DPLL rate to 928 which has low jitter. BRANCH=none BUG=chrome-os-partner:57845 TEST=boot kevin and run while true; do sleep 0.1; memtester 500K 1 > /dev/null; done for several hours Change-Id: I4d2a8871aaabe3b0a1a165c788af265c5f9e892c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 54ebf8763bb8193c4b36a5e86f0c625b176d31a6 Original-Change-Id: Iaa12bf67527b6d0e809657c513b8d1c66af25174 Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/404550 Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17379 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-17rockchip/rk3399: Change PLL configuration to match Linux kernelJulius Werner
The Kevin project has been too smooth and boring for our tastes in the last last few weeks, so we've decided to stir the pot a little bit and reshuffle all our PLL settings at the last minute. The new settings match exactly what the Linux kernel expects on boot, so it doesn't need to reinitialize anything and risk a glitch. Naturally, changing PLL rates will affect child clocks, so this patch changes vop_aclk (192MHz -> 200MHz, 400MHz in the kernel), pmu_pclk (99MHz -> 96.57MHz) and i2c0_src (198MHz -> 338MHz, leading to an effective I2C0 change 399193Hz -> 398584Hz). BRANCH=gru BUG=chrome-os-partner:59139 TEST=Booted Kevin, sanity checking display and beep. Instrumented rockchip_rk3399_pll_set_params() in the kernel and confirmed that GPLL, PPLL and CPLL do not get reinitialized anymore (with additional kernel patch to ignore frac divider when it's not used). Also confirmed that /sys/kernel/debug/clk_summary now shows pclk_pmu_src 96571429 because the kernel doesn't even bother to reinitialize the divisor. Change-Id: Ib44d872a7b7f177fb2e60ccc6992f888835365eb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9b82056037be5a5aebf146784ffb246780013c96 Original-Change-Id: Ie112104035b01166217a8c5b5586972b4d7ca6ec Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/405785 Original-Commit-Ready: Xing Zheng <zhengxing@rock-chips.com> Original-Tested-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Xing Zheng <zhengxing@rock-chips.com> Original-Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/17378 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-14soc/rockchip: split edp_enable() functionLin Huang
To avoid garbage display in firmware on warm reset, we need to enable eDP display in depthcharge instead when the framebuffer is cleared. Therefore limit edp_enable() in coreboot to just configure eDP, and leave enabling the display to depthcharge. CQ-DEPEND=CL:402071 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, and display work Change-Id: I9d937ead33ebba58e33e02fd73b80d6e11bb69aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38b0d18c3fae37dfccb18fe809f763b98703167c Original-Change-Id: Ibbc283a5892b98f4922f02fd67465fe2e1d01b71 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/402095 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17207 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-03rockchip/rk3399: sdram.c: Fix msch ddrconfig register errorLin Huang
Fix msch ddrconfig register write error. Also make sure that the row number configured in msch is equal to the row number configured in the DDR controller. This would not affect systems with 4GB of memory, but is needed for 2GB configurations. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: Ic95b3371faec5b31c32b011c50e55e83d949e74d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dfa43d3d44839d9685b6393157f51b646e9996de Original-Change-Id: I0c95378bf937a245b7cdc0583c5d2ed1347f2a3e Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399563 Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17208 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
framebuffer address is dynamically chosen by libpayload now, so there's no need to configure it in coreboot. CQ-DEPEND=CL:401402 BUG=chrome-os-partner:58675 BRANCH=none TEST=Boot from kevin, dev screen is visible Change-Id: I9f1e581d5c63b3579b26be22ce5c8d1e71679f6f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b3b6675420592c30e1e0abc8f8e9dd6ed5abd04c Original-Change-Id: I7e3162f24a4dc426fe4e10d74865cf0042c80db5 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/401401 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17109 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: Reset system if switch to index1 failsLin Huang
Near the end of DDR initialization, the system switches to the index1 configuration. Sometimes this failed and a status bit that coreboot was waiting for was never set, hanging the system. Instead, give the system 100ms to reach the new configuration or reboot it, which generally fixes the issue. Also reset when training the index1 configuration fails. BUG=chrome-os-partner:57988 BRANCH=None TEST=The error condition now leads to a reboot of coreboot which recovers the system, instead of hanging. Change-Id: Icb4270369102ff7a4ce91b0677e04b4eb10f1204 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ca250d0628ea3b6b39d5131246eaba68637c5140 Original-Change-Id: Id6e8936d90e54b733ac327f8476d744b45639232 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/399681 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17106 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: Fix data training functionLin Huang
1. Update write leveling value to 0x200. When the wrdqs slave delay is changed to 0x200, the phase between the dqs and the clock is 0 degrees. The pcb layout can make sure the tDQSS timing is smaller than 0.25tck, so this value is useful for both higher and lower frequencies. 2. Disable read leveling for LPDDR3. The read leveling result is unreliable - the value is not in the middle of the read eye. To fix this, disable read leveling and fix the read DQSn slave delay setting for DQn to 0x080 (1/4 cycle delay of the input signal). BUG=None BRANCH=None TEST=Boot from kevin; Check by shmoo read eye and stability test, that the updated value of 0x80 is better. Change-Id: Ia72b601d9bf4e34ba1b0b4584b2c5c3ce9dafbd4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 37e8dfe783db3ce71aa026b4609ed0bfa16db06f Original-Change-Id: I2a5d40c0348449b2a7c609c1db65da4ed5f1c09f Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Signed-off-by: Jeff Chen <cym@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/396598 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-on: https://review.coreboot.org/17105 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
To enable DDR Dynamic Voltage and Frequency Scaling (DVFS) we need to train alternative configurations first, so do the training and store the values. BUG=None BRANCH=None TEST=Boot from kevin Change-Id: I944a4b297a4ed6966893aa09553da88171307a42 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94533ff3ba21bcb0ace00bedcf0cebb89a341be2 Original-Change-Id: I4a98bc0db5553d154fedb657e35b926a92aa80c7 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/386596 Original-Commit-Ready: Douglas Anderson <dianders@chromium.org> Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17104 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 15:48:38 +0000