summaryrefslogtreecommitdiff
path: root/src/soc/rockchip
AgeCommit message (Expand)Author
2015-04-17rk3288: detect sdram size at runtimehuang lin
2015-04-17rk3288: Handle framebuffer through memlayout, not the resource systemJulius Werner
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
2015-04-15rk3288: support edp HPD functionhuang lin
2015-04-15rk3288: set the rk808 BUCK default inductor current to max valuehuang lin
2015-04-15rk3288: Fix failing LPDDR3 reboot testjinkun.hong
2015-04-15rk3288: Fix failing DDR3 reboot testjinkun.hong
2015-04-15rk3288: send correct EDID buffer sizehuang lin
2015-04-15rk808: Implement RTC driverDavid Hendricks
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
2015-04-15rk3288: Implement support for CRYPTO module and use it in vboot hashingJulius Werner
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
2015-04-15rk3288: implement spi_crop_chunk()Patrick Georgi
2015-04-14rk3288: Fix memlayout to allow a little more bootblock spaceJulius Werner
2015-04-14rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGEJulius Werner
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
2015-04-13rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speedJulius Werner
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
2015-04-13arm: Redesign mainboard and SoC hooks for bootblockJulius Werner
2015-04-13rk3288: Increase the delay after DDR reset de-assert to 10us.Dailunxue
2015-04-10rk3288: reset edp after edp clock source selecthuang lin
2015-04-10rockchip: support displayhuang lin
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
2015-04-10vboot: move vboot files to designated directoryDaisuke Nojiri
2015-04-10rk3288: Adjust CBFS header and ROM offsetsJulius Werner
2015-04-10rk3288: don't log LAST_TSHUT bithuang lin
2015-04-10rk3288: slowly raise to max cpu voltage to prevent overshoothuang lin
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-09soc: Use DEVICE_NOOP macro formalism over static stub funcEdward O'Callaghan
2015-04-08timer: Add generic udelay() implementationAaron Durbin
2015-04-08console: fix Kconfig usesPatrick Georgi
2015-04-08rk3288: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-08rk3288: support tsadchuang lin
2015-04-08rk3288: Add early SRAM mappingJulius Werner
2015-04-08rk3288: Fix some PLL divisors and improve clock codeJulius Werner
2015-04-08rk3288: Re-write spi_xfer() to support full duplexDavid Hendricks
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
2015-04-06New mechanism to define SRAM/memory map with automatic bounds checkingJulius Werner
2015-04-06Add predefined __ROMSTAGE__ and __RAMSTAGE__ macrosJulius Werner
2015-04-04rk3288: set cpu frequency up to 1.8GHzhuang lin
2015-04-04rk3288: guarantee i2c low period more than 1.3ushuang lin
2015-04-04veyron_pinky/rk3288: Use KHz, MHz and GHz constantsJulius Werner
2015-04-04rk3288: Replace SPI fifo_size with constantDavid Hendricks
2015-04-04rk3288: Pass SPI bus speed in as parameter to init functionDavid Hendricks
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 08:14:50 +0000