summaryrefslogtreecommitdiff
path: root/src/soc/samsung
AgeCommit message (Collapse)Author
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-18include/device: Split i2c.h into threeNico Huber
Split `i2c.h` into three pieces to ease reuse of the generic defi- nitions. No code is changed. * `i2c.h` - keeps the generic definitions * `i2c_simple.h` - holds the current, limited to one controller driver per board, devicetree independent I2C interface * `i2c_bus.h` - will become the devicetree compatible interface for native I2C (e.g. non-SMBus) controllers Change-Id: I382d45c70f9314588663e1284f264f877469c74d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-14i2c: Move to Linux like `struct i2c_msg`Nico Huber
Our current struct for I2C segments `i2c_seg` was close to being compa- tible to the Linux version `i2c_msg`, close to being compatible to SMBus and close to being readable (e.g. what was `chip` supposed to mean?) but turned out to be hard to fix. Instead of extending it in a backwards compatible way (and not touching current controller drivers), replace it with a Linux source compatible `struct i2c_msg` and patch all the drivers and users with Coccinelle. The new `struct i2c_msg` should ease porting drivers from Linux and help to write SMBus compatible controller drivers. Beside integer type changes, the field `read` is replaced with a generic field `flags` and `chip` is renamed to `slave`. Patched with Coccinelle using the clumsy spatch below and some manual changes: * Nested struct initializers and one field access skipped by Coccinelle. * Removed assumption in the code that I2C_M_RD is 1. * In `i2c.h`, changed all occurences of `chip` to `slave`. @@ @@ -struct i2c_seg +struct i2c_msg @@ identifier msg; expression e; @@ ( struct i2c_msg msg = { - .read = 0, + .flags = 0, }; | struct i2c_msg msg = { - .read = 1, + .flags = I2C_M_RD, }; | struct i2c_msg msg = { - .chip = e, + .slave = e, }; ) @@ struct i2c_msg msg; statement S1, S2; @@ ( -if (msg.read) +if (msg.flags & I2C_M_RD) S1 else S2 | -if (msg.read) +if (msg.flags & I2C_M_RD) S1 ) @@ struct i2c_msg *msg; statement S1, S2; @@ ( -if (msg->read) +if (msg->flags & I2C_M_RD) S1 else S2 | -if (msg->read) +if (msg->flags & I2C_M_RD) S1 ) @@ struct i2c_msg msg; expression e; @@ ( -msg.read = 0; +msg.flags = 0; | -msg.read = 1; +msg.flags = I2C_M_RD; | -msg.read = e; +msg.flags = e ? I2C_M_RD : 0; | -!!(msg.read) +(msg.flags & I2C_M_RD) | -(msg.read) +(msg.flags & I2C_M_RD) ) @@ struct i2c_msg *msg; expression e; @@ ( -msg->read = 0; +msg->flags = 0; | -msg->read = 1; +msg->flags = I2C_M_RD; | -msg->read = e; +msg->flags = e ? I2C_M_RD : 0; | -!!(msg->read) +(msg->flags & I2C_M_RD) | -(msg->read) +(msg->flags & I2C_M_RD) ) @@ struct i2c_msg msg; @@ -msg.chip +msg.slave @@ struct i2c_msg *msg; expression e; @@ -msg[e].chip +msg[e].slave @ slave disable ptr_to_array @ struct i2c_msg *msg; @@ -msg->chip +msg->slave Change-Id: Ifd7cabf0a18ffd7a1def25d1d7059b713d0b7ea9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
Also unify __attribute__ ((..)) to __attribute__((..)) and handle ((__packed__)) like ((packed)) Change-Id: Ie60a51c3fa92b5009724a5b7c2932e361bf3490c Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/15921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
There are many good reasons why we may want to run some sort of generic callback before we're executing a reset. Unfortunateley, that is really hard right now: code that wants to reset simply calls the hard_reset() function (or one of its ill-differentiated cousins) which is directly implemented by a myriad of different mainboards, northbridges, SoCs, etc. More recent x86 SoCs have tried to solve the problem in their own little corner of soc/intel/common, but it's really something that would benefit all of coreboot. This patch expands the concept onto all boards: hard_reset() and friends get implemented in a generic location where they can run hooks before calling the platform-specific implementation that is now called do_hard_reset(). The existing Intel reset_prepare() gets generalized as soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now easily be added later if necessary). We will also use this central point to ensure all platforms flush their cache before reset, which is generally useful for all cases where we're trying to persist information in RAM across reboots (like the new persistent CBMEM console does). Also remove cpu_reset() completely since it's not used anywhere and doesn't seem very useful compared to the others. Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19789 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-07spi: Remove unused/unnecessary spi_init function definitionsFurquan Shaikh
Remove spi_init definitions which: 1. Do nothing 2. Set static global variables to 0 Change-Id: If4c0cdbe2271fc7561becd87ad3b96bd45e77430 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20039 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-24soc/samsung/exynos5420: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ic937cbf93b87f5e43f7d70140b47fa97bcd7757e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-05drivers/spi: Re-factor spi_crop_chunkFurquan Shaikh
spi_crop_chunk is a property of the SPI controller since it depends upon the maximum transfer size that is supported by the controller. Also, it is possible to implement this within spi-generic layer by obtaining following parameters from the controller: 1. max_xfer_size: Maximum transfer size supported by the controller (Size of 0 indicates invalid size, and unlimited transfer size is indicated by UINT32_MAX.) 2. deduct_cmd_len: Whether cmd_len needs to be deducted from the max_xfer_size to determine max data size that can be transferred. (This is used by the amd boards.) Change-Id: I81c199413f879c664682088e93bfa3f91c6a46e5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19386 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: coreboot org <coreboot.org@gmail.com>
2017-03-28vboot: Select SoC-specific configuration for all Chrome OS boardsJulius Werner
Some Chrome OS boards previously didn't have a hardcoded vboot configuration (e.g. STARTS_IN_BOOTBLOCK/_ROMSTAGE, SEPARATE_VERSTAGE, etc.) selected from their SoC and mainboard Kconfig files, and instead relied on the Chrome OS build system to pass in those options separately. Since there is usually only one "best" vboot configuration for a certain board and there is often board or SoC code specifically written with that configuration in mind (e.g. memlayout), these options should not be adjustable in menuconfig and instead always get selected by board and SoC Makefiles (as opposed to some external build system). (Removing MAINBOARD_HAS_CHROMEOS from Urara because vboot support for Pistachio/MIPS was never finished. Trying to enable even post-romstage vboot leads to weird compiler errors that I don't want to track down now. Let's stop pretending this board has working Chrome OS support because it never did.) Change-Id: Ibddf413568630f2e5d6e286b9eca6378d7170104 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19022 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-16samsung/exynos5420: Fix test for src < 0Patrick Georgi
It was unsigned, not a good place to be for testing < 0. Change-Id: I126fe86422900bbae2c3ca16052be27985cfed53 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1241911 Reviewed-on: https://review.coreboot.org/17888 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-24soc/samsung/exynos5420/uart.c: Init new serial struct variablesMartin Roth
The lb_serial structure had some new entries added, which were not being filled in. Fill in the values so they're not undefined. Addresses coverity error 1354778 - Uninitialized scalar variable Change-Id: Ia7ce07f6e4e058c91c2e063f3225497271ef93ff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17482 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-12Documentation: Fix doxygen errorsMartin Roth
Change-Id: I195fd3a9c7fc07c35913342d2041e1ffef110466 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15549 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-06-24region: Add writeat and eraseat supportAntonello Dettori
Implement writeat and eraseat support into the region_device_ops struct. Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-11soc/samsung: Don't compile in unused uart divider tablesStefan Reinauer
Change-Id: I58b2c3c52444d9a755d05529992507086a423f1a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14620 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2016-02-21soc/*: fix uart's regwidth specification in cbtablesPatrick Georgi
coreboot passes information about the serial port implementation to payloads through a cbtables entry. We set the register width to 1 on most SoCs because that looked as good a default as any, but checking the uart structs they use, it's 4 for all of them. Change-Id: I9848f79737106dc32f864ca901c0bc48f489e6b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13746 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-01-18header files: Fix guard name comments to match guard namesMartin Roth
This just updates existing guard name comments on the header files to match the actual #define name. As a side effect, if there was no newline at the end of these files, one was added. Change-Id: Ia2cd8057f2b1ceb0fa1b946e85e0c16a327a04d7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12900 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-16soc/samsung/exynos5250: Implement hard_reset()Stefan Reinauer
Implement hard_reset() as power_reset() to make vboot happy. Change-Id: I16831055bd6ba8a8c95836fcf31f29c068153fcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/12722 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-22linking: link bootblock.elf with .data and .bss sections againAaron Durbin
Currently coreboot expects the loader to clear the bss section for all stages. i.e. stages don't clear their own bss. On ARM SoCs the BootROM would be responsible for this. To do that one needs to include the bss section data (all zeros) in the bootblock.bin file. This was previously being attempted by keeping the .bss info in the .data section because objcopy happened zero out non-file allocated data section data. Instead go back to linking bootblock with the bss section but mark the bss section as loadable allocatable data. That way it will be included in the binary properly when objcopy -O binary is emplyed. Also do the same for the data section in the case of no non-zero object values are in the data section. Without this change the trick of including .bss in .data was not working when there wasn't a non-zero value object in the data section. BUG=None BRANCH=None TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains the cleared bss. Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-09verstage: use common program.ld for linkingAaron Durbin
There's no reason to have a separate verstage.ld now that there is a unified stage linking strategy. Moreover verstage support is throughout the code base as it is so bring in those link script macros into the common memlayout.h as that removes one more specific thing a board/chipset needs to do in order to turn on verstage. BUG=chrome-os-partner:44827 BRANCH=None TEST=None Change-Id: I1195e06e06c1f81a758f68a026167689c19589dd Signed-off-by: Aaron Durbin <adubin@chromium.org> Reviewed-on: http://review.coreboot.org/11516 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-07Drop "See file CREDITS..." commentStefan Reinauer
coreboot has no CREDITS file. Change-Id: Iaa4686979ba1385b00ad1dbb6ea91e58f5014384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11514 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-09samsung/exynos5250: Add vboot2 memory regionPatrick Georgi
Change-Id: Ia7d2cafc958859be782f63c956dbd632e28bcf11 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-08samsung/exynos5250: Enable bootblock consolePatrick Georgi
Change-Id: I7b177b4c57f8e304167610205196ecfe4beb4fea Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11102 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02cbfs: new API and better program loadingAaron Durbin
A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26coreboot: introduce boot_deviceAaron Durbin
The boot_device is a region_device that represents the device from which coreboot retrieves and boots its stages. The existing cbfs implementations use the boot_device as the intermediary for accessing the CBFS region. Also, there's currently only support for a read-only view of the boot_device. i.e. one cannot write to the boot_device using this view. However, a writable boot_device could be added in the future. Change-Id: Ic0da796ab161b8025c90631be3423ba6473ad31c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10216 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere (with no overlap), and never read. Remove it. Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10253 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-29kbuild: automatically include SOCsStefan Reinauer
This change switches all SOC vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in soc/Makefile.inc or in soc/<vendor>/Makefile.inc. This means, vendor and SOC directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9799 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-21arm(64): Manually clean up the mess left by write32() transitionJulius Werner
This patch is a manual cleanup of all the rubble left by coccinelle waltzing through our code base. It's generally not very good with line breaks and sometimes even eats comments, so this patch is my best attempt at putting it all back together. Also finally remove those hated writel()-style macros from the headers. BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254865 Reviewed-on: http://review.coreboot.org/9837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Globally replace writel(v, a) with write32(a, v)Julius Werner
This patch is a raw application of the following spatch to src/: @@ expression A, V; @@ - writel(V, A) + write32(A, V) @@ expression A, V; @@ - writew(V, A) + write16(A, V) @@ expression A, V; @@ - writeb(V, A) + write8(A, V) @@ expression A; @@ - readl(A) + read32(A) @@ expression A; @@ - readb(A) + read8(A) BRANCH=none BUG=chromium:444723 TEST=None (depends on next patch) Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6 Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254864 Reviewed-on: http://review.coreboot.org/9836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-21arm(64): Replace write32() and friends with writel()Julius Werner
This patch is a raw application of the following spatch to the directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>, src/soc/<arm(64)-soc> and src/drivers/gic: @@ expression A, V; @@ - write32(V, A) + writel(V, A) @@ expression A, V; @@ - write16(V, A) + writew(V, A) @@ expression A, V; @@ - write8(V, A) + writeb(V, A) This replaces all uses of write{32,16,8}() with write{l,w,b}() which is currently equivalent and much more common. This is a preparatory step that will allow us to easier flip them all at once to the new write32(a,v) model. BRANCH=none BUG=chromium:451388 TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky. Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24 Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/254862 Reviewed-on: http://review.coreboot.org/9834 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
Some SOCs (like pistachio, for instance) provide an 8250 compatible UART, which has the same register layout, but mapped to a bus of a different width. Instead of adding a new driver for these controllers, it is better to have coreboot report UART register width to libpayload, and have it adjust the offsets accordingly when accessing the UART. BRANCH=none BUG=chrome-os-partner:31438 TEST=with the rest of the patches integrated depthcharge console messages show up when running on the FPGA board Change-Id: I30b742146069450941164afb04641b967a214d6d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c30845f269ec6ae1d53ddc5cda0b4320008fa42 Original-Change-Id: Ia0a37cd5f24a1ee4d0334f8a7e3da5df0069cec4 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/240027 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9738 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-17exynos: return correct value when init_default_cbfs_media failsDaisuke Nojiri
BUG=none BRANCH=ToT TEST=Built daisy. Change-Id: I64033f8e7beb247b2b8bd66e58de6c5e263ee634 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1ff51e887a07a0f2426e5111df683ce2a9d4097d Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Change-Id: Id6e006be1db08933dc97b5e797a85f3cbf9f6486 Original-Reviewed-on: https://chromium-review.googlesource.com/232513 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/9735 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
We have known for a while that the old x86 model of calling init_timer() in ramstage doesn't make sense on other archs (and is questionable in general), and finally removed it with CL:219719. However, now timer initialization is completely buried in the platform code, and it's hard to ensure it is done in time to set up timestamps. For three out of four non-x86 SoC vendors we have brought up for now, the timers need some kind of SoC-specific initialization. This patch reintroduces init_timer() as a weak function that can be overridden by platform code. The call in ramstage is restricted to x86 (and should probably eventually be removed from there as well), and other archs should call them at the earliest reasonable point in their bootblock. (Only changing arm for now since arm64 and mips bootblocks are still in very early state and should sync up to features in arm once their requirements are better understood.) This allows us to move timestamp_init() into arch code, so that we can rely on timestamps being available at a well-defined point and initialize our base value as early as possible. (Platforms who know that their timers start at zero can still safely call timestamp_init(0) again from platform code.) BRANCH=None BUG=None TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit. Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234062 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9606 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
Non-x86 boards currently need to hardcode the position of their CBFS master header in a Kconfig. This is very brittle because it is usually put in between the bootblock and the first CBFS entry, without any checks to guarantee that it won't overlap either of those. It is not fun to debug random failures that move and disappear with tiny alignment changes because someone decided to write "ORBC1112" over some part of your data section (in a way that is not visible in the symbolized .elf binaries, only in the final image). This patch seeks to prevent those issues and reduce the need for manual configuration by making the image layout a completely automated part of cbfstool. Since automated placement of the CBFS header means we can no longer hardcode its position into coreboot, this patch takes the existing x86 solution of placing a pointer to the header at the very end of the CBFS-managed section of the ROM and generalizes it to all architectures. This is now even possible with the read-only/read-write split in ChromeOS, since coreboot knows how large that section is from the CBFS_SIZE Kconfig (which is by default equal to ROM_SIZE, but can be changed on systems that place other data next to coreboot/CBFS in ROM). Also adds a feature to cbfstool that makes the -B (bootblock file name) argument on image creation optional, since we have recently found valid use cases for CBFS images that are not the first boot medium of the device (instead opened by an earlier bootloader that can already interpret CBFS) and therefore don't really need a bootblock. BRANCH=None BUG=None TEST=Built and booted on Veyron_Pinky, Nyan_Blaze and Falco. Change-Id: Ib715bb8db258e602991b34f994750a2d3e2d5adf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e9879c0fbd57f105254c54bacb3e592acdcad35c Original-Change-Id: Ifcc755326832755cfbccd6f0a12104cba28a20af Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229975 Reviewed-on: http://review.coreboot.org/9620 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-13rk3288/exynos5250/exynos5420: Consolidate timer filesJulius Werner
Some boards spread their timer implementation out in multiple files with one function each for no discernable reason. Let's clean that up to make things a little simpler to find. BRANCH=None BUG=None TEST=Booted Pinky, compiled Daisy and Pit. Change-Id: I8b543d1a0d9af37bde5433b0c9271d687b2404b2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 887765e1bd88d7aa49ad9a5e98b8831c10da6c10 Original-Change-Id: I43d29cd1b4a1d89cfd40f6cba5ca99ada3b00f82 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/234061 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
We've had gpiolib.h which defines a few common GPIO access functions for a while, but it wasn't really complete. This patch adds the missing gpio_output() function, and also renames the unwieldy gpio_get_in_value() and gpio_set_out_value() to the much easier to handle gpio_get() and gpio_set(). The header is renamed to the simpler gpio.h while we're at it (there was never really anything "lib" about it, and it was presumably just chosen due to the IPQ806x include/ conflict problem that is now resolved). It also moves the definition of gpio_t into SoC-specific code, so that different implementations are free to encode their platform-specific GPIO parameters in those 4 bytes in the most convenient way (such as the rk3288 with a bitfield struct). Every SoC intending to use this common API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most 4 bytes in length. Files accessing the API only need to include <gpio.h> which may pull in additional things (like a gpio_t creation macro) from <soc/gpio.h> on its own. For now the API is still only used on non-x86 SoCs. Whether it makes sense to expand it to x86 as well should be separately evaluated at a later point (by someone who understands those systems better). Also, Exynos retains its old, incompatible GPIO API even though it would be a prime candidate, because it's currently just not worth the effort. BUG=None TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and Veyron_Pinky. Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/220975 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9400 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-08timer: Add generic udelay() implementationAaron Durbin
Add GENERIC_UDELAY Kconfig option so that a generic udelay() implementation is provided utilizing the monotonic timer. That way each board/chipset doesn't need to duplicate the same udelay(). Additionally, assume that GENERIC_UDELAY implies init_timer() is not required. BUG=None BRANCH=None TEST=Built nyan, ryu, and rambi. May need help testing. Change-Id: I7f511a2324b5aa5d1b2959f4519be85a6a7360e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1a85fbcad778933d13eaef545135abe7e4de46ed Original-Change-Id: Idd26de19eefc91ee3b0ceddfb1bc2152e19fd8ab Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219719 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/9334 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-04-07exynos5420: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns exynos5420 to the new SoC header include scheme. Also alphabetized headers in affected files since we touch them anyway. BUG=None TEST=Tested with whole series. Compiled Peach_Pit. Change-Id: If97b40101d3541a81bca302a9bd64b84a04ff24a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 570ca9ed6337d622781f37184b2cd7209de0083f Original-Change-Id: I338559564e57bdc5202d34c7173ce0d075ad2afc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224501 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9324 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-07exynos5250: Change all SoC headers to <soc/headername.h> systemJulius Werner
This patch aligns exynos5250 to the new SoC header include scheme. Also alphabetized headers in affected files since we touch them anyway. BUG=None TEST=Tested with whole series. Compiled Daisy. Change-Id: I39805c0346e117a0f9b2667763ecaa428f0f55a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db6762f0c8425371d9860f908a5cefdeee8d1abc Original-Change-Id: Ic358061ddcbbe7d83a95ca11247b8b505b20491d Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/224500 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9323 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-07kconfig: drop intermittend forwarder filesStefan Reinauer
With kconfig understanding wildcards, we don't need Kconfig files that just include other Kconfig files anymore. Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9298 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>