summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2014-12-31broadwell: Preparations for buildingMarc Jones
Updated Intel Broadwell for differences in the source based on the chromium tree. It is missing most of the recent updates on coreboot.org. - makefile changes for Elog and IDF tool - kconfig changes for ME, ucode, and other updates - update oprom flag - update timestamp mechanism - cbfs payload function is now generic Change-Id: I82bd0792e9dcf81085246873164de6600528d6fe Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7939 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-31ipq8064: modify SPI controller driver to work in corebootVadim Bendebury
A typical SPI operation consists of two phases - command and data transfers. Command transfer is always from the host to the chip (i.e. is going in the 'write' direction), data transfer could be either read or write. We don't want the receive FIFO to be operating while the command phase is in progress. A simple way to keep the receive FIFO shut down is to not to enable it until the command phase is completed. Selective control of the receive FIFO allows to consolidate the receive and transmit functions in a single spi_xfer() function, as it happens in other SPI controller drivers. The FIFO FULL and FIFO NOT EMPTY conditions are used to decide if the next byte can be written or received, respectively. While data is being received the 0xFF bytes are transmitted per each received byte, to keep the SPI bus clocking. The data structure describing the three GSBI ports is moved from the .h file into .c file. A version of the clrsetbits macro is added to work with integer addresses instead of pointers. BUG=chrome-os-partner:27784 TEST=not yet, but with the res of the changes the bootblock loads and starts the rombase section successfully. Original-Change-Id: I78cd0054f1a8f5e1d7213f38ef8de31486238aba Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197779 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit c101ae306d182bbe14935ee139a25968388d745a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I7f3fd0524ec6c10008ff514e8a8f1d14a700732f Reviewed-on: http://review.coreboot.org/7983 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
The original patch from chromium was a bit of a mishmash. Between that, rebasing and using the coreboot.org UART infrastructure, the patch has changed a bit from the original. It seems reasonable to keep these changes together. - build in the ipq UART and turn on bootblock console - sets LPAE and ROM header address - adds cpd.c to storm The original commit: ipq8064: make UART driver work in bootblock This patch it the last one in the chain adapting the ipq9064 UART driver for use in coreboot. A new config option (CONSOLE_SERIAL_IPQ806X) is being introduced to control inclusion of the driver. The previously introduced uart_wrapper.c is now included in the build to provide the console driver structure used by ramstage. Necessary configuration options are added to allow use of UART in the bootblock. BUG=chrome-os-partner:27784 TEST=with this change the coreboot image on AP148 prints a banner on start up: coreboot-4.0 Wed Apr 23 16:24:51 PDT 2014 starting... Original-Change-Id: I129ee30ba17a5061b30cfee56c135df31eba98b5 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196663 (cherry picked from commit 42ca8994361327c24e7a611505b21534dd231f30) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1175e74ed639cdc27a1a677fba65de2dd2b13a91 Reviewed-on: http://review.coreboot.org/7875 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-31baytrail: add more gpio init macrosKane Chen
GPIO init marcos are not enough to initialize different gpio attributes BUG=none TEST=emerge-rambi coreboot works well Original-Change-Id: I193fa7b3e22632cacb555e726e3dd3991f4f4faa Original-Signed-off-by: Kane Chen <kane.chen@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200531 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 5e0fcbcd7cefcfccb5b565003336d197bb29e4cc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6bf4db9397733a003dfdedc6eb63b82127917851 Reviewed-on: http://review.coreboot.org/7953 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq8064: copy u-boot spi driver as isVadim Bendebury
This brings in the banana_cs version of the SPI driver. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Ie93ec8c962c26fff1f0a235516cd8a4062cab40b Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/194225 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 3cada6e4ed51a6d4f637aa31a1a836352a99d13d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I0a58a4ddaf9375c22c9b2b249a2baa2c5538ba6c Reviewed-on: http://review.coreboot.org/7982 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30tegra: i2c: Add a timeout to I2C bit clear recovery mechanismJulius Werner
Our tests with the I2C bit clear mechanism (recovering from "lost arbitration" errors) show that the bit clear hardware does not work correctly in some situations. When a wedged slave device tries to send more than one 0-to-1-to-0 transition to the host (e.g. leftover bits from an aborted read), the controller never transitions the BC_ENABLE bit back to zero. This patch adds a long timeout to the bit clear code that waits for register transitions as a safeguard. This way, We will still eventually exit the function (probably followed by a reboot). Our tests show that this will recover from all conditions after at most a few reboots. BRANCH=nyan BUG=chrome-os-partner:28323 TEST=Ran wedge_ack and wedge_read tests with software_i2c patch, system recovered as expected in all cases. Original-Change-Id: I6c37119130e1240e1ef3a5944582abbcd2e39ff0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/200265 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4c8d0af25cf107a38c856b38067b8f2f74384f22) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I600d5c9a8e68719cf8795c083c5fac63f626f5bf Reviewed-on: http://review.coreboot.org/7948 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
This patch adds I2C emulation in software through raw toggling of the SDA/SCL lines. Platforms need to provide bindings to toggle their respective I2C busses for this to work (e.g. by pinmuxing them as GPIOs, currently only enabled for Tegra). This is mostly useful as a debugging feature, to drive unusual states on a bus and closely monitor the device output without the need of a bus analyzer. It provides a few functions to "wedge" an I2C bus by aborting a transaction at certain points, which can be used to test if a system can correctly recover from an ill-timed reboot. However, it can also dynamically replace the existing I2C transfer functions and drive some/all I2C transfers on the system, which might be useful if a driver for the actual I2C controller hardware is not (yet) available. Based on original code by Doug Anderson <dianders@chromium.org> and Hung-ying Tyan <tyanh@chromium.org> for the ChromeOS embedded controller project. BRANCH=None BUG=chrome-os-partner:28323 TEST=Spread tegra_software_i2c_init()/tegra_software_i2c_disable() through the code and see that everything still works. Original-Change-Id: I9ee7ccbd1efb38206669a35d0c3318af16f8be63 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/198791 Original-Reviewed-by: Doug Anderson <dianders@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 8f71503dbbd74c5298e90e2163b67d4efe3e89db) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6c5f75bb5baaabd62b6b1fc26c2c71d9f1ce682 Reviewed-on: http://review.coreboot.org/7947 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30tegra124: Active dc/sor register change immediatelyVince Hsu
When doing DP attach, we need to make sure the register change to take effect immediately, otherwise it may fail to catch the attach timing. BRANCH=None BUG=chrome-os-partner:28128 TEST=Display works and system boots up on Nyan and Big Original-Change-Id: I569dc435a1aa4aac0d5ecd0655d2ad87a791246d Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200414 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 47b86e2893fa667bebada6a0e0b443886dd5ee02) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Icf809b46e675bbdb8633d9a4f31d005d6644bd2a Reviewed-on: http://review.coreboot.org/7951 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30tegra124: display clock should be initialized before any accessVince Hsu
We initialized the dc before the plld's initialization. So some of the dc init settings did not took effect. This patch moves the clock_display() before the dc init call. BRANCH=None BUG=chrome-os-partner:28128 TEST=Display works and system boots up on Nyan and Big Original-Change-Id: If2c40e2526fdf7a6aa33a2684ba324bd0ec40e90 Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/200413 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit dc3cc253c319c21772c30962d963ec9dfc4944a7) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I021290f4293c740666d460f73fecbe79146896a4 Reviewed-on: http://review.coreboot.org/7950 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
The IO accessor wrappers are used to allow integer register addresses. A structure defining UART interface configuration is declared and defined. A few long lines are wrapped. Interface functions are renamed to match the wrapper API. cdp.c is edited to fit into coreboot compilation environment, and the only function required by the UART driver if exposed, the rest are compiled out for now. BUG=chrome-os-partner:27784 TEST=after all patches are applied the serial console on AP148 becomes operational. Original-Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196662 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5e9af53a069cd048334a3a28f0a4ce9df7c96992) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I80c824d085036c0f90c52aad77843e87976dbe49 Reviewed-on: http://review.coreboot.org/7874 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq8064: prepare include files before adding UART driverVadim Bendebury
These patch modifies .h files to match the coreboot API. A few more significant changes are: - UART specific fields removed from common board structure in cdp.h. These fields are set at compile time in u-boot (where this structure comes from), they will be set in a different structure in the UART driver in an upcoming patch. - an inline wrapper is added in gpio.h to provide GPIO API the UART driver expects. - the ipq_configure_gpio() is passed the descriptor placed in ro data. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Id49507fb0c72ef993a89b538cd417b6c86ae3786 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196661 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit ea400f1b720eb671fa411c5fd1df7efd14fdacd6) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2c7be09675b225de99be3c94b22e9ee2ebb2cb9a Reviewed-on: http://review.coreboot.org/7873 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq8064: SOC UART driver belongs in the SOC directoryVadim Bendebury
Move the driver to where it belongs. BUG=chrome-os-partner:27784 TEST=none Original-Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196658 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 64afb0a2ac9b6cd4c202b879a484220e70ff5bbe) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee33de0b29a6bb86ba7c37e7e89aabc0fee42e80 Reviewed-on: http://review.coreboot.org/7871 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-12-30ipq8064: make timer services availableMarc Jones
Make sure it is initialized at different stages. BUG=chrome-os-partner:27784 TEST=manual . not much at this point, just verified that it compiles Original-Change-Id: I343e7a6648e2ca935606cd76befd204aabd93726 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196592 (cherry picked from commit aedc41924313e5c21aef97b036f5a0643d59082d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4a90ae5ba6c9a561b7d5c938d18b6ea2b855855f Reviewed-on: http://review.coreboot.org/7981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30ipq/arm: Redesign hooks for bootblockVadim Bendebury
The following patches had to be squashed to properly build all the different ARM boards. ipq8064: storm: re-arrange bootblock initialization The recent addition of the storm bootblock initialization broke compilation of Exynos platforms. The SOC specific code needs to be kept in the respective source files, not in the common CPU code. As of now coreboot does not provide a separate SOC initialization API. In general it makes sense to invoke SOC initialization from the board initialization code, as the board knows what SOC it is running on. Presently all what's need initialization on 8064 is the timer. This patch adds the SOC initialization framework for 8064 and moves there the related code. BUG=chrome-os-partner:27784 TEST=manual . nyan_big, peach_pit, and storm targets build fine now. Original-Change-Id: Iae9a021f8cbf7d009770b02d798147a3e08420e8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197835 (cherry picked from commit 3ea7307b531b1a78c692e4f71a0d81b32108ebf0) Signed-off-by: Marc Jones <marc.jones@se-eng.com> arm: Redesign mainboard and SoC hooks for bootblock This patch makes some slight changes to the way bootblock_cpu_init() and bootblock_mainboard_init() are used on ARM. Experience has shown that nearly every board needs either one or both of these hooks, so having explicit Kconfigs for them has become unwieldy. Instead, this patch implements them as a weak symbol that can be overridden by mainboard/SoC code, as the more recent arm64_soc_init() is also doing. Since the whole concept of a single "CPU" on ARM systems has kinda died out, rename bootblock_cpu_init() to bootblock_soc_init(). (This had already been done on Storm/ipq806x, which is now adjusted to directly use the generic hook.) Also add a proper license header to bootblock_common.h that was somehow missing. Leaving non-ARM32 architectures out for now, since they are still using the really old and weird x86 model of directly including a file. These architectures should also eventually be aligned with the cleaner ARM32 model as they mature. BRANCH=None BUG=chrome-os-partner:32123 TEST=Booted on Pinky. Compiled for Storm and confirmed in the disassembly that bootblock_soc_init() is still compiled in and called right before the (now no-op) bootblock_mainboard_init(). Original-Change-Id: I57013b99c3af455cc3d7e78f344888d27ffb8d79 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/231940 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 257aaee9e3aeeffe50ed54de7342dd2bc9baae76) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id055fe60a8caf63a9787138811dc69ac04dfba57 Reviewed-on: http://review.coreboot.org/7879 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-12-30baytrail: Add defines and functions for GPNCOREKein Yuan
BUG=chrome-os-partner:25159 BRANCH=firmware-rambi-5216.B TEST=Build pass for Rambi Original-Change-Id: I049f9254fe25aabf13d891579444bba2cfcf68c5 Original-Change-Id: Ib7c814660262e2507813ee5970190f98530dfe5e Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197984 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> (cherry picked from commit dd05055f2f74fc0e4875733c0e5dedcbae302bfa) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Iee01407a73bec420ab47d07524a3f1fd0f4d9817 Reviewed-on: http://review.coreboot.org/7892 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-28intel baytrail broadwell: Include microcode updatesKyösti Mälkki
Commit 66e0c4c renamed the variable. Change-Id: I9e8dc3e7f140411d04b35a21ada76aaa578832fb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7960 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-12-27samsung/exynos*/Makefile.inc: Simplify unnecessary ifeqEdward O'Callaghan
It's not needed, as we can use a simpler macro instead. Change-Id: Ib96f5cfa434d0383ee3bfe49995a8f8830987f20 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7925 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-12-26tegra124: Add a utility function to read the cause of the most recent reset.Gabe Black
When a watchdog reset happens, the SOC will reset but other parts of the system might not. In order to detect those situations we can check the rst_status register in the PMC. BUG=chrome-os-partner:28559 TEST=With this and a change which uses the new function in the nyan boards, built for nyan, nyan_big and nyan_blaze. Booted normally, through EC reset, software reset ("reboot" command from the terminal), and through watch dog reset. Verified that the new code only triggered during the watchdog reset and that the system rebooted and was able to boot without going into recovery mode unnecessarily. BRANCH=nyan Original-Change-Id: I7430768baa0304d4ec8524957a9cc37078ac5a71 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/198581 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5fdc0239fc2960167dd9c074f3804bf9e4ad686a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5845d3a4d819868f5472c758e83e83b00e141b72 Reviewed-on: http://review.coreboot.org/7899 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
This is a fix for the 'Lost arb' we're seeing on Nyan* during reboot stress testing. It occurs when we are slamming the default PMIC registers with pmic_write_reg(). Currently, I've only captured this a few times, and the bus clear seemed to work, as the PMIC writes continued (where they'd hang the system before bus clear) for a couple of regs, then it hangs hard, no messages, no 2nd lost arb, etc. So I've added code to the PMIC write function that will reset the SoC if any I2C error occurs. That seems to recover OK, i.e. on the next reboot the PMIC writes all go thru, boot is OK, kernel loads, etc. BUG=chrome-os-partner:28323 BRANCH=nyan TEST=Tested on nyan. Built for nyan and nyan_big. Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982 Original-Signed-off-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/197732 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> (cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc Reviewed-on: http://review.coreboot.org/7897 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-26soc/samsung/exynos5250/clk.h: Trivial, fix spelling in commentsEdward O'Callaghan
Change-Id: Iaacd4d7977ddeff4204acdc32d4d13fd88b6660b Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7928 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-26soc/samsung/exynos5250/clock.c: Trivial whitespace fixesEdward O'Callaghan
Reduce difference with exynos5420/clock.c by fixing some whitespace and an include directive. Change-Id: Ifbdd61c8300f3988f5f729fe7d6124ac8a9b7821 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7926 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-26soc/samsung/exynos: Sync 'power.c' between chip variantsEdward O'Callaghan
Change-Id: I06d83be840b49ee7523b34e1dba5ec038256b3f4 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7918 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-25soc/samsung/exynos: Make 'ps_hold_setup()' staticEdward O'Callaghan
Change-Id: I272fea9c2767c341e8a545bf7a9ac18eefa2bda5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/7917 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
Some panels (including those on Big DVT) cannot work fine without link training before sending the video signals, especially multi-lane Full HD panels. We need to use the fast link training functions from kernel to support them. BRANCH=Nyan BUG=chrome-os-partner:28128, chrome-os-partner:28129 TEST=tested on nyan, nyan_big dvt. Vince verified on Full HD panels. Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4 Original-Reviewed-on: https://chromium-review.googlesource.com/196162 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1 Reviewed-on: http://review.coreboot.org/7864 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19fsp_baytrail: Initialize LPC pads in bootblock for port 80Martin Roth
Port 80h codes were coming out of bootblock and romstage scrambled, or were not coming out at all. Initializing the LPC signal pads as LPC fixes that issue. Change-Id: I16943513f2eb6fe8fa58766aaa82dac182440c34 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7802 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19fsp_baytrail: Remove GPIO_NC1 #defineMartin Roth
The GPIO_NC1 #define was added to handle GPIOs that are not on func0. This is already handled elsewhere in the GPIO code, so is not needed. - Remove the single GPIO_NC1 from platforms using fsp_baytrail - Revert the GPIO_INPUT_PU_10k #define to remove the _func argument. Update everywhere this macro is called. - Remove GPIO_NC1 Change-Id: I32f337af7bc88eab821d9a8c375145b45718275f Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7849 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-19baytrail SOCs: Add missing comma in gpio.hMartin Roth
The GPIO_OUT_LOW #define was missing an internal comma in both soc/intel/baytrail and soc/intel/fsp_baytrail. Thanks to Werner Zeh for pointing this out. Change-Id: I2e5507058739e5fdc2c0e43e0380058458870e46 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7801 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
2014-12-17baytrail: initialize backlight PWM frequencyAaron Durbin
In order to protect ourselves from the kernel driver not honoring or placing the correct frequency in the backlight register always set one. This code path picks 200Hz as the default if nothing is specified in device tree. It's somewhat arbitrary but that frequency is valid for all the eDP panel specs we've seen being used on baytrail devices. BUG=chrome-os-partner:28267 BRANCH=baytrail TEST=Built and booted in normal mode. Noted register write stuck. Original-Change-Id: Ifec29f0671e9f14ba57b9643c29d8bb2cd07eef5 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/196821 Original-Reviewed-by: Marc Jones <marc.jones@se-eng.com> (cherry picked from commit 2eaa650860ebbc838dbf8c1c1ca2259ac64141ac) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifec29f0671e9f14ba57b9643c29d8bb2cd07eef5 Reviewed-on: http://review.coreboot.org/7845 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-17x86: Initialize SPI controller explicitly during PCH initDavid Hendricks
This ensures that SPI is ready when eventlog code is used. x86 platforms which use eventlog invoke elog_clear() in GSMI and elog_add_event_raw() when deciding the boot path based on ME status. For the SMM case spi_init() is called during the finalize stage in SMM setup. For the boot path case we can call spi_init() at the beginning of BS_DEV_INIT and it will be ready to use when the boot path is determined from the ME status. BUG=none BRANCH=none TEST=tested on Link (bd82x6x), Beltino (Lynxpoint), and Rambi (Baytrail) with follow-up patch Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id3aef0fc7d4df5aaa3c1c2c2383b339430e7a6a1 Original-Reviewed-on: https://chromium-review.googlesource.com/194525 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> Original-Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 173d8f08e867bab8c97a6c733580917f5892a45d) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ifaed677bbb141377b36bd9910b2b1c3402654aad Reviewed-on: http://review.coreboot.org/7756 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-12-17tegra124: modify panel init sequenceKen Chang
Panel datasheet defines some delay between PWM signal out and backlight enable. This change fixes the current sequence and makes the delays adjustable by dt setting. BRANCH=none BUG=chrome-os-partner:28008 TEST=Verified on Big DVT and Nyan/Norrin panels. Panel works fine with dev mode, and the measurement of power on sequence meets panel requirements. Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/196183 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3 Reviewed-on: http://review.coreboot.org/7776 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
Enable pinmux clamp function to avoid pinmux conflict. For pins which are configured to tristate enabled, the inputs to the controller will be clamped to zero. This can be used to avoid pinmux conflicts since the tristate bit is set to 1 in the power-on-reset pinmux setting. With pinmux clamp enabled, we need to configure all the input pins to tristate disabled. BUG=chrome-os-partner:27091 BRANCH=None TEST=built and booted successfully, display worked fine. Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194060 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0 Reviewed-on: http://review.coreboot.org/7775 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17fsp_baytrail: Add code to read GPIOs in romstageMartin Roth
- Build gpio.c into romstage - Add functions to translate the GPIO # to a pad #, then return the value read from the GPIO. - Add functions to configure the GPIO - Function, Pull up/down, pull strength, Input/Output, and Output level. Change-Id: Ic37dfc9a74a598023bdf797d31087428adec176a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/7796 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
2014-12-17ARM: Use LPAE for Virtual Address TranslationDaisuke Nojiri
This change introduces LPAE for virtual address translation. To enable it, set ARM_LPAE. Boot slows down about 4ms on Tegra124 with LPAE enabled. TEST=Booted nyan with and without LPAE. Built nyan_big and daisy. BUG=None BRANCH=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: Daisuke Nojiri <dnojiri@google.com> Original-Change-Id: I74aa729b6fe6d243f57123dc792302359c661cad Original-Reviewed-on: https://chromium-review.googlesource.com/187862 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org> Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org> (cherry picked from commit 6d8c8b2bbdc70555076081eb3bfaabde7b4a398f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8980375c14758af35f7d5ec5244be963e5462d8a Reviewed-on: http://review.coreboot.org/7749 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-17tegra124: change PLLD VCO calculation algorithmKen Chang
The current algo sets dc shift clock divider to 5 and PLLD DIVP to 0, this is causing VCO out of the characterized range for some panels. This CL changes the dc shift clock divider to 1 and calculates a proper DIVP to have the VCO inside the characterized range, i.e., 500MHz ~ 1000MHz. BRANCH=none BUG=none TEST=Verify on below panels the pixel clock frequencies are correct. 1. AUO B133XTN01.3 (69.5 MHz) pixelclk(MHz), pll_d(MHz), m/n/p without: 69.5 695 12/695/0 with: 69.5 139 3/139/2 2. AUO B140HTT01.0 (141 MHz) pixelclk(MHz), pll_d(MHz), m/n/p without: VCO (1410000000) out of range. Cannot support. with: 141 282 2/94/1 3. LG LP140WH8 (76.32 MHz) pixelclk(MHz), pll_d(MHz), m/n/p without: 76.32 763.2 5/381/0 with: 76.3125 152.625 8/407/2 4. N116BGE-EA2 (76.42 MHz) pixelclk(MHz), pll_d(MHz), m/n/p without: 76.40 764 3/191/0 with: 76.375 152.75 12/611/2 Original-Change-Id: Id4b3a4865acde37a97d7346ec88406f5237304eb Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/195534 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 1b56566786aa86c14f691fa3858b878f27b6b4de) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9de93420e60323f143a42db842febdd3706fe44 Reviewed-on: http://review.coreboot.org/7773 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16tegra124: Allow "best" PLLD parameters for unmatched pixel clock.Hung-Te Lin
The pixel clock for some panel (ex: CMN N116BGE-EA2: 76420000) cannot be matched by our PLLD params finding algorithm, after VCO/CF limitations are applied. To support these panels, we want to allow "best matched" params. BRANCH=nyan BUG=none TEST=emerge-nyan_big coreboot chromeos-bootimage; emerge-nyan coreboot chromeos-bootimage; # Successfully brings up display on Nyan_Big EVT2 and Nyan Norrin. Original-Change-Id: If8143c2062abd2f843c07698ea55cab47bf1e41a Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/195327 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> (cherry picked from commit 8aa66e659e3c60296f05e59b4343496a850ea019) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I623db44de35fecee5539e4d72f93f28b5fa0b59c Reviewed-on: http://review.coreboot.org/7771 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16tegra124: Always enable DC when attaching SOR.Hung-Te Lin
We found that without enabling DC in tegra_dc_sor_enable_dc, kernel would have problem showing the text console before graphics interface is initialized, for example "chromeos factory install shim (text only)" or the "splash screen". BRANCH=none BUG=chrome-os-partner:28082 TEST=emerge-nyan coreboot chromeos-bootimage Boots factory install shim and see text console. Original-Change-Id: I6fce963ceddd125dd52789d2ec843cc2ee05f1f5 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/195388 (cherry picked from commit 375a86be9b23650cd96e46b07c7a0b5c10970797) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib75e3ffac9b216c7486845cb8459dd8952d51fe6 Reviewed-on: http://review.coreboot.org/7770 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16nyan*: debug: Add sor registers dump functionJimmy Zhang
Dump all SOR registers for debug purpose. By default, this function is not being built in. BRANCH=none BUG=chrome-os-partner:27413 TEST=build nyan and nyan_big. Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: I7f44709b8572b9eac33c2193b92a65bf2b22aa76 Original-Reviewed-on: https://chromium-review.googlesource.com/194738 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Commit-Queue: Tom Warren <twarren@nvidia.com> Original-Tested-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit d08c0f7c5e8ac094987b09fae96e8133ed9c08c5) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I1341bbbd0ea6277e5a1b286d6f088f2961070416 Reviewed-on: http://review.coreboot.org/7769 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16tegra124: clock: Enforce PLL constraints for VCO and CFJulius Werner
This patch adds some documentation to the additional PLL divisor constraints on the intermediary VCO and CF values that we just found out about. PLLC divisors for some oscillators had to be adjusted accordingly. It also adds a new clock_get_pll_input_khz() function to replace clock_get_osc_khz() in cases where you want to factor in the built-in predivider for 38.4 and 48 MHz oscillators. BUG=None TEST=Still boots. Original-Change-Id: Ib6e026dbab9fcc50d6d81a884774ad07c7b0dbc3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/194474 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 3f1f565baf100edcd486055e4317c675c882396f) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I091f42bf952a4b58ef2c30586baa5bf7496fa599 Reviewed-on: http://review.coreboot.org/7768 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16nyan*: Set SOR_NV_PDISP_SOR_DP_SPARE0 registerJimmy Zhang
This register needs to be set properly during display init. BRANCH=none BUG=chrome-os-partner:27413 TEST=build nyan and nyan_big. nyan display works fine. nyan_big display works as well. However, the mode setting needs to be based on either devicetree or EDID. Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: I93c69d8042a3f3c19f4e24801423b73246e37031 Original-Reviewed-on: https://chromium-review.googlesource.com/194739 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit ee9a3c472c5621edebefcc8882582c6fc01255e2) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ie642a008eaf6c4ab68ede1dde98ff4268f51fc9c Reviewed-on: http://review.coreboot.org/7767 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16nyan*: merge a couple of sor setting difference from kernel driverJimmy Zhang
BRANCH=none BUG=chrome-os-partner:27413 TEST=build nyan and nyan_big. nyan display works fine. nyan_big display still does't work until all related patches are built in. (CL:194739) Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: Ic5d977f695be127693f1ecc3ba52d478f524d20f Original-Reviewed-on: https://chromium-review.googlesource.com/194737 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit ef3208d8ff3c3dcfaeda9c0146bf1ae920682dea) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ide1cd28ecc0ae1cd4d8603a52975592daee4bce8 Reviewed-on: http://review.coreboot.org/7766 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16nyan*: Apply sor fix from kernel dc driverJimmy Zhang
Correct SOR attaching sequence. https://chromium-review.googlesource.com/190300 BRANCH=none BUG=chrome-os-partner:27413 TEST=build nyan and nyan_big. nyan display works fine. nyan_big display still doesn't work until all related patches are built in. (CL:194737 and CL:194739) Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Change-Id: I8aaf65db90e5e45bd9097c9d38b231bd7d41d997 Original-Reviewed-on: https://chromium-review.googlesource.com/194403 Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org> Original-Tested-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit fea9d288b98dcc6fc32dc93212fa7c4185603646) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6646816809e29c63de65caa7e7146cd3d02902cf Reviewed-on: http://review.coreboot.org/7765 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16tegra124: Initialize display panel by EDID.Hung-Te Lin
Tegra124 family products may want to use many different display panels with various timing settings. To support them, we should initialize display panel by EDID instead of hard-coded values. BUG=none TEST=emerge-nyan coreboot chromeos-bootimage BRANCH=none Original-Change-Id: Ib125a7f9cb1e6c8cf2d79e0baab525acfd1b7a6e Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/192730 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 43ecd473419aa0fbdd22487416b0b6cfea6a20d1) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I6af47db113035e9440e663a769318776c7b6b70b Reviewed-on: http://review.coreboot.org/7764 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-12-16CBMEM console: Fix boards with BROKEN_CAR_MIGRATEKyösti Mälkki
There is no need to call cbmemc_reinit() exclusively in romstage, that is done as part of the CAR migration of cbmem_recovery(). CBMEM console for romstage remains disabled for boards flagged with BROKEN_CAR_MIGRATE, but with this change it is possible to have it for ramstage. Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7592 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
Flag the boards with BROKEN_CAR_MIGRATE, as testing for EARLY_CBMEM_INIT is not enough to disable CBMEM console for romstage on these platforms. To have CBMEM early in ramstage, define get_top_of_ram() on sandy/ivy. Change-Id: Ieefc12099a0e043eb1a7e14bdc7c6e3d209b3d8f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7468 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-12-16i2c: Replace the i2c API.Gabe Black
The new API is in use in depthcharge and is based around the "i2c_transfer" function instead of i2c_read and i2c_write. The new function takes an array of i2c_seg structures which represent each portion of the transfer after a start bit and before the stop bit. If there's more than one segment, they're seperated by repeated starts. Some wrapper functions have also been added which make certain common operations easy. These include reading or writing a byte from a register or reading or writing a blob of raw data. The i2c device drivers generally use these wrappers but can call the i2c_transfer function directly if the need something different. The tegra i2c driver was very similar to the one in depthcharge and was simple to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and replace the ones in coreboot. The Exynos 5420 driver was ported from the high speed portion of the one in coreboot and was straightforward to port back. The low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot and were replaced with the depthcharge implementation. BUG=None TEST=Built and booted on nyan with and without EFS. Built and booted on, pit and daisy. BRANCH=None Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193561 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe) This cherry-pick required additional changes to the following: src/cpu/allwinner/a10/twi.c src/drivers/xpowers/axp209/axp209.c Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7 Reviewed-on: http://review.coreboot.org/7751 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-15tegra124: set MOT bit for I2C-over-AUXKen Chang
According to DP version 1.2a, The MOT (Middle-of-Transaction) bit must be set when the I2C transaction does not stop with the current AUX transaction. Thus the correct steps for an I2C read shall be: 1. I2C command write with MOT set to 1 2. I2C command read to the same address with MOT set to 0 BUG=chrome-os-partner:27679 TEST=EDID data read from LP140WH8 panel is correct while it's a repeated pattern of the first 16 bytes without this CL BRANCH=none Original-Change-Id: I0526beffb8852fbbe0eb5bb80e370261617a59b8 Original-Signed-off-by: Ken Chang <kenc@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/194915 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 466ab0e00744f79ae3720474140d95e5f0828de9) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ic8ad38b4b08989dd7178d59151e1e276b8a58439 Reviewed-on: http://review.coreboot.org/7763 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
PLLD, the clock for display, was previously hard-coded to 306MHz. To support more different panels, we should calcualte PLLD by panel pixel clock configuration. Note existing pixel clock configurations for nyan* boards won't work (they used to rely on hard-coded approximated values) so the device trees are also modified. BRANCH=none BUG=chrome-os-partner:25933 TEST=emerge-nyan_big coreboot chromeos-bootimage See panel correctly initialized and got DEV screen. Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3 Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/193565 (cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916 Reviewed-on: http://review.coreboot.org/7762 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: Release DMA channel at end of transactionDavid Hendricks
This adds a missing dma_release() at the end of DMA transfers. It probably doesn't matter since we don't do many DMA transfers, though I wouldn't want to hit some corner case with EFS and eventlog. BUG=none BRANCH=none TEST=tested on nyan Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I79b30455babe75a13aac827caac88bf7053ec9e4 Original-Reviewed-on: https://chromium-review.googlesource.com/194479 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit dc7dc1d25bd88873b4c1198a6f3723d27c914ddc) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I8c5da4e104328fd8bce71942e6eda458a37bfe06 Reviewed-on: http://review.coreboot.org/7761 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15tegra124: Use correct mask for APB bus widthDavid Hendricks
It worked earlier since the APB and AHB bus widths occupy the same bits in their respective registers. BUG=none BRANCH=none TEST=tested on Nyan Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: I9b18c648c60dcc4ad62ca1f514d253f8cccaeee7 Original-Reviewed-on: https://chromium-review.googlesource.com/194478 Original-Tested-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: David Hendricks <dhendrix@chromium.org> (cherry picked from commit 1d912302e9dcc9c6ba69e15434bb1841e1196208) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I2ea7ac83d3501876df52018aed467ec33074817e Reviewed-on: http://review.coreboot.org/7760 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
This change takes about 8K of space away from the cbfs cache and repurposes it for the cbmem console buffer. This is a little more than twice the space we currently need for the bootblock and ROM stage to give us some room to grow and for extra debug output if needed. BUG=None TEST=Built and booted on nyan. Checked the cbmem output. BRANCH=None Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55 Original-Signed-off-by: Gabe Black <gabeblack@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/193169 Original-Reviewed-by: Gabe Black <gabeblack@chromium.org> Original-Commit-Queue: Gabe Black <gabeblack@chromium.org> Original-Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab Reviewed-on: http://review.coreboot.org/7757 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-25 16:12:25 +0000