Age | Commit message (Collapse) | Author |
|
This uses the packet mode of the controller since that allows transfering more
data at a time.
Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172402
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6703
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins on tegra are controlled by three different units, the pinmux, the
pin group controls, and the GPIO banks. Each of these units controls some
aspect of the pins, and they layer together and interact in interesting ways.
By default, the GPIOs are configured to pass through the special purpose IO
that the pinmux is configured to and so can be ignored unless a GPIO is needed.
The pinmux controls which special purpose signal passes through, along with
pull ups, downs, and whether the output is tristated. The pingroup controls
change the parameters of a group of pins which all have to do with a related
function unit.
The enum which holds constants related to the pinmux is relatively involved
and may not be entirely complete or correct due to slightly inconsistent,
incomplete, or missing documentation related to the pinmux. Considerable
effort has been made to make it as accurate as possible. It includes a
constant which is the index into the pinmux control registers for that pin,
what each of the functions supported by that pin are, and which GPIO it
corresponds to. The GPIO constant is named after the GPIO and is the pinmux
register index for the pin for that GPIO. That way, when you need to turn on
a GPIO, you can use that constant along with the pinmux manipulating functions
to enable its tristate and pull up/down mode in addition to setting up the
GPIO controls.
Also, while in general I prefer not to use macros or the preprocessor when
writing C code, in this case the set of constants in the enums was too large
and cumbersome to manage without them. Since they're being used to construct
a table in a straightforward way, hopefully their negative aspects will be
minimized.
In addition to the low level functions in each driver, the GPIO code also
includes some high level functions to set up input or output GPIOs since that
will probably be a very common thing to want to do.
Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171806
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a)
tegra124: Add base address for the pinmux and pingroup registers.
There weren't any constants for the pinmux or pingroup registers in the
address map header.
Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62)
Squashed two related commits.
Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6702
Tested-by: build bot (Jenkins)
|
|
If these aren't set, the rom and ram stages will attempt to load at address
zero which doesn't work.
Change-Id: I0b9b37d6363e6b208248d8a1af6ebee4db602486
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/173540
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 6ac5cea39d423bfcf5bbd53c2cc6228ab89f08b2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6704
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
A problem with including the tegra124 directory directly in the include path
is that it makes all headers in that directory first level headers available
everywhere including places that have nothing to do with the SOC, even headers
which were only intended for local use by tegra124 code. This change modifies
things a bit to be more like the way the arch headers are chosen. In the
tegra124 directory, there's an include directory which has an soc subdirectory
in it. That include directory is added to the include path, making it possible
to have headers private to the tegra124. When files specific to whatever tegra
is being built for are needed, you can include <soc/foo.h> and get the version
specific to that particular soc.
Also, the soc.h header file was overhauled to use enums instead of defines, to
consistently name things as far as their prefix (the less cryptic TEGRA instead
of NV_PA) and suffixes like "BASE", and to get rid of values which were
specific to U-Boot which we don't need. Since the only thing in the file were
address constants, I also renamed the file addressmap.h. It would be included
as:
<soc/addressmap.h>
which I think is easy to remember, does what you'd think it does from the
name, and won't conflict with other header files just minding their own
business in some other directory.
Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172080
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6659
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The initial commit for tegra124 (396b072) was not updated for the new ARCH settings.
Change-Id: I147bdf289e91031bd0c0a61e6da43e9c1a438f84
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6658
Tested-by: build bot (Jenkins)
|
|
Stop polluting first screen of all boards.
Change-Id: I1ab88075722f7f0d63550010e7c645281603c9c3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change shows the source structure for nvidia Tegra and Tegra124
SOC. The problem we are trying to solve is that there is a large
amount of common code in the form of .c and .h files across many
different Tegra SOCs. The solution is to provide common code in a
single directory, but not to compile in the common code directory;
rather, we compile in a directory for a given SOC. Different SOCs
will sometimes need different bits of code from the common directory.
Tegra common code lives in tegra/, but there is no makefile there: if
a Tegra common file is needed in a SOC, it is referenced via a
Makefile in a specific Tegra SOC.
Another issue is includes. Include files in the common directory might be
accessed by a piece of code in an SOC directory. More problematically,
code in the common directory might require a file in an SOC directory.
We don't want to put the SOC name in an #include path, e.g.
in a C file in tegra/ is very undesirable, since we might be compiling
for a tegra114.
On some systems this is solved by a pre-pass which creates a set of
symbolic links; on others with nested #ifdef in the common code
which include different .h files depending on CPP variables.
In previous years, both LinuxBIOS and coreboot have tried these
solutions and found them inconvenient and error-prone.
We choose to solve it by requiring explicit naming of part of the path
of files that are in the common directory. This requirement, coupled
with two -I directives in the Makefile.inc, allows common and SOC
C code to incorporate both common and SOC .h files.
.c and .h files -- SOC or common -- name include
files in the common directory with the prefix tegra/, e.g.
SOC files will be included from the SOC directory if they have no prefix:
The full patch of clock.h will depend on what SOC is being compiled, which
is desirable.
In this way, a common file can pick up a specific SOC file without
creating symlinks or other such tricky magic.
We show this usage with one file, soc/nvidia/tega124/clock.c. This compiles.
The last question is where to put the prototype for the function
defined in this file -- soc.h?
Change-Id: Iecb635cec70f24a5b3e18caeda09d04a00d29409
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/171569
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 53e3bed868953f3da588ec90661d316a6482e27e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6621
Tested-by: build bot (Jenkins)
|
|
It turns out there's a register in tegra which automatically counts at 1us
increments. It's primarily intended for hardware to use (I think to drive
other timers) but we can read it ourselves since a 1us timer is exactly what
we need to support the monotonic timer API.
Change-Id: I68e947944acec7b460e61f42dbb325643a9739e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172044
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 161a39c53404ea0125221bbd54e54996967d6855)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6620
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Otherwise the stack ends up down at 0 and has 0 bytes.
Change-Id: I0e3c80a0c5b0180d95819ab44829c2a0b527a54d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171015
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3e69a477474697bcbc40762ec166e8a515d8b0c2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6619
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
These rules slip into the normal bootblock preperation process and use the
cbootimage utility to wrap it in a BCT.
Change-Id: I8cf2a3fb6e9f1d792d536c533d4813acfb550cea
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170924
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cf4a9b0712c21b885bb59310671fb87e38abb665)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6618
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
irq_helper.h intentionally gets included into irqroute.asl twice - once
for pic mode and once for apic mode. Since people are used to seeing
guard statements on the .h files, add the guards to irqroute.h and add
a comment to irq_helper.h explaining why they aren't there. Add a
time.
Change-Id: I882cbbff0f73bdb170bd0f1053767893722dc60a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6572
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Most things still needs to be filled in, but this will allow us to build
boards which use this SOC.
Change-Id: Ic790685a78193ccb223f4d9355bd3db57812af39
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170836
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 462456fd00164c10c80eff72240226a04445fe60)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6431
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The GPIO_NC setting sets up the gpio as a no-connect - sets it as an
input, and pulls it high. It makes an assumption that the GPIO
function is muxing function 0. There are a few GPIOs that are on
function 1 instead:
* GPIO_S0_SC[092-93]
* GPIO_S5[11-21]
For these GPIOs, use the GPIO_NC1 setting instead of GPIO_NC.
Change-Id: Iac6790b40e87ad4ac9a3b265a8e10662186c1201
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6428
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.
Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I6db4eada5be5f9a4340d9edb942924e2fd18b5ca
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6284
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: If70f5ad26d639d7366772f4468a25bca83ac0857
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6295
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
SPI controllers in Intel and AMD bridges have a slightly different
restriction on how long transactions they can handle.
Change-Id: I3d149d4b7e7e9633482a153d5e380a86c553d871
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6163
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1829c77f41cc809b590d00ef5522f368bd5fd814
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6208
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Whenever spi_xfer is called and whenver it's implemented, the natural unit for
the amount of data being transfered is bytes. The API expected things to be
expressed in bits, however, which led to a lot of multiplying and dividing by
eight, and checkes to make sure things were multiples of eight. All of that
can now be removed.
BUG=None
TEST=Built and booted on link, falco, peach_pit and nyan and looked for SPI
errors in the firmware log. Built for rambi.
BRANCH=None
Change-Id: I02365bdb6960a35def7be7a0cd1aa0a2cc09392f
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192049
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6175
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The spi_flash_probe and and spi_setup_slave functions each took a max_hz
parameter and a spi_mode parameter which were never used.
BUG=None
TEST=Built for link, falco, rambi, nyan.
BRANCH=None
Change-Id: I3a2e0a9ab530bcc0f722f81f00e8c7bd1f6d2a22
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/192046
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
[km: cherry-pick from chromium]
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6174
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The override value in the mainboard that was removed was correct.
Change-Id: Ie820df0d6b7a713488173240f0c0ca4a9e108f71
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6095
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
- remove the Kconfig text when setting the default for the FSP location.
The text was showing up twice in the config menu.
- Remove an extra 'the' in the help text.
Change-Id: I3777833bf32e19bbe5a8493578a9346d6ab062a4
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Icab0aeb2d5bf19b4029ca29b8a1e7564ef59a538
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6071
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The default FSP location needs to be in the chipset, not the mainboard.
This was removed from the Bayley Bay mainboard in patch 41ea7230f7
reviewed at http://review.coreboot.org/#/c/5982/
Change-Id: Ia26ed34e1401cbd2303166628e7a4e357d79c874
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5985
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
- Add the Bay Trail B0/B1 microcode. These versions of the SOC were
released as a "Super SKU" which had features of all the different
SKUS (M/D/T/I), and identified as a Bay Trail T as noted by the
number 2 in the third character from the left in the microcode name.
- Update the size of the microcode blob. We should be pushing a patch
to eliminate the need for this shortly.
Change-Id: I57ba51eabe9ea0609ab809f18b95e3bc9d5cb191
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5986
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
This existed for ChromeOS but was no longer used with DYNAMIC_CBMEM.
Change-Id: I558a7ae333e5874670206e20a147dd6598a3a5e7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Intel requested that we remove the version number from the default
vbios path.
Change-Id: I2590fed0db157e3e430212336fc55eb099d28a72
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5984
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
While pushing the fsp_baytrail code, it was requested that we change
CONFIG_ENABLE_FAST_BOOT to CONFIG_ENABLE_FSP_FAST_BOOT.
These were missed in the change.
Change-Id: If8af3f90b0f5cc9154ff1d3a387f442430f42dee
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5972
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
realpath and readlink can be used to do the same thing - in this case
we're turning path1/path2/../path3/path4 into path1/path3/path4 so
that the makefile's wildcard routine can evaluate it.
Debian derivatives don't seem to include realpath. (and even when it's
installed, it's not the gnu coreutils version.)
Change-Id: I0a80a1d9b563810bdf96aea9d5de79ce1cea457a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5793
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
While similar to the Bay Trail-M/D code based on the MRC, there are
many differences as well:
- Obviously, uses the FSP instead of the MRC binaries.
- FSP does additional hardware setup, so coreboot doesn't need to.
- Different microcode & microcode loading method
- Uses the cache_as_ram.inc from the FSP Driver
- Various other changes in support of the FSP
Additional changes that don't have to to with the FSP vs MRC:
- Updated IRQ Routing
- Different FADT implementation.
This was validated with FSP:
BAYTRAIL_FSP_GOLD_002_10-JANUARY-2014.fd
SHA256: d29eefbb33454bd5314bfaa38fb055d592a757de7b348ed7096cd8c2d65908a5
MD5: 9360cd915f0d3e4116bbc782233d7b91
Change-Id: Iadadf8cd6cf444ba840e0f76d3aed7825cd7aee4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5791
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are a couple of places where CPPFLAGS are
pasted into CFLAGS, eliminate them.
Change-Id: Ic7f568cf87a7d9c5c52e2942032a867161036bd7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5765
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename INCLUDES to CPPFLAGS since the latter is more
commonly used for preprocessor options.
Change-Id: I522bb01c44856d0eccf221fa43d2d644bdf01d69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5764
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Apply the SOC thermal settings from DPTF reference code for
SdpProfile=4 and adjust graphics PUNIT setting to match.
BUG=chrome-os-partner:17279
BRANCH=baytrail
TEST=boot on rambi and check for valid GPU power values from DPTF
Change-Id: I59fc4b75b52084ebcc4c0556563afca0585ea6b8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182786
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5052
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enable the config options to have the device enumeration layer configure
common clock and ASPM for endpoints.
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on rambi, check PCIe for ASPM and common clock:
lspci -vv -s 0:1c.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
lspci -vv -s 1:00.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
Change-Id: I2477e3cada0732dc71db0d6692ff5b6159ed269f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Though the limited documentation indicates the default is
0 for the gfx_turbo_disable bit, in practice that isn't
true. Knock down the gfs_turbo_disable bit to enable
graphics turbo mode.
BUG=chrome-os-partner:25044
BRANCH=baytrail
TEST=Built and booted. Added debug code to output SB_BIOS_CONFIG.
Noted that bit 7 was set to 0.
Change-Id: I11210c6a0b29765cb709a54d6ebd94211538807b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182640
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5050
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On baytrail, it appears that the turbo disable setting is
actually building-block scoped. One can see this on quad
core parts where if enable_turbo() is called only on the
BSP then only cpus 0 and 1 have turbo enabled. Fix this
by calling enable_turbo() on all non-bsp cpus.
BUG=chrome-os-partner:25014
BRANCH=baytrail
TEST=Built and booted rambi. All cpus have bit 38 set to 0
in msr 0x1a0.
Change-Id: Id493e070c4a70bb236cdbd540d2321731a99aec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182406
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5048
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This will allow USB devices to wake the system (if 5V is not turned off)
and the controller to enter D3 at runtime. (if autosuspend is enabled)
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on baytrail
1) with modified EC to leave 5V on in S3 ensure that waking from suspend
with USB keyboard works.
2) with laptop-mode-tools usb autosuepend config updated see that device
enters D3 at runtime when no external devices attached.
Change-Id: Ia396d42494e30105f06eb3bd65b4ba8b1372cf35
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182536
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5046
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The current byte value was being converted to an int
when checking against literal 0xff. As the type of
the current pointer was char (signed) it was sign
extending the value leading to 0xffffffff != 0xff.
Fix this by using an unsigned type and using a
constant type for expected erase value.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmwareupdate. Noted that MRC
cache doesn't think the erased region isn't erased.
Change-Id: If95425fe26da050acb25f52bea060e288ad3633c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182154
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On a firmware update the MRC cache is destroyed. On the
subsequent boot the MRC region was attempted to be erased
even if it was already erased. This led to spi part taking
longer than it should have for an unnecessary erase
operation. Therefore, check that the region is erased
before issuing the erease command.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmeareupdate. Noted no
error messages in this path.
Change-Id: I6fadeb6bc5fc178abb0a7e3f0898855e481add2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5043
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Include C0 microcode drop.
BUG=None
BRANCH=rambi,squawks
TEST=Built. Booted B3 part.
Change-Id: If454658235cd5a7b8640de0b3fa12dccddb0e9f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182080
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5041
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This improves boot time in 2 ways for a firmware upgrade:
1. Normally MRC would detect the S0 state without an MRC cache
even though it's told to the S5 path. When it observes this
state a cold reset occurs. The cold reset stays in S5 for
at least 4 seconds which is time observed by the end user.
2. As the EC was running RW code before the reset after firmware
upgrade it will still be running the older RW code. Vboot will
then reboot the EC and the whole system to put the EC into RO
mode so it can handle the RW update.
The issues are mitigated by detecting the system is in S0 with
no MRC cache and the EC isn't in RO mode. Therefore we can do the
reboot without waiting the 4 secs and the EC is running RO so
the 2nd reboot is not necessary.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Booted. Updated firmware while in OS. Rebooted. Noted the
EC reboot before MRC execution.
Change-Id: I1c53d334a5e18c237a74ffbe96f263a7540cd8fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182061
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5040
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Added a method in each temp sensor to disable the aux trip points
and then a wrapper function to call this method for each enabled
temperature sensor.
The event handler function is changed to not use a switch statement
so it does not need to be serialized. This was causing issues
with nested locking between the global lock and the EC PATM mutex.
Some unused code in temp sensors that was added earlier is removed
and instead a critical threshold is specified in _CRT.
The top level DPTF device _OSC method is expanded to check for the
passive policy UUID and initialize thermal devices. This is done
for both enable and disable steps to ensure that the EC thermal
thresholds are reset in both cases.
Additionally the priority based _TRT is specified with TRTR=1.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and start
esif_uf application. Observe that temperature thresholds are set
properly when running 'appstart Dptf' and that they are disabled
after running 'appstop Dptf'
Change-Id: Ia15824ca42164dadae2011d4e364b70905e36f85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182024
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5037
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove some unused functions from CPU participant that were
confusing the userland component since the CPU does not have
an ACPI managed sensor.
- Guard the charger participant with an ifdef so it can be
left out if not supported.
- Use the EC methods for setting auxiliary trip points and for
handling the event when those trip points are crossed.
- Add _NTT _DTI _SCP methods for thermal sensors. I'm not
clear if these are required or not but they seem to be expected
by the other DPTF framework components.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and load ESIF framework
Change-Id: I3c9d92d5c52e5a7ec890a377e65ebf118cdd7087
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5028
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SMI on TCO timer timeout policy was copied from other
chipsets. However, it's not very advantageous to have
the TCO timer timeout trigger an SMI unless the firmware
was the one responsible for setting up the timer.
BUG=chromium:321832
BRANCH=rambi,squawks
TEST=Manually enabled TCO timer. TCO fires and logged in
eventlog.
Change-Id: I420b14d6aa778335a925784a64160fa885cba20f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181985
Reviewed-on: http://review.coreboot.org/5035
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PMC in baytrail maintains an additional set
wake status in memory-mapped registers. If these
bits aren't cleared the device won't be able to
go to S5 or S3 without being immediately woken up.
Therefore clear these registers.
BUG=chrome-os-partner:24913
BRANCH=rambi,squawks
TEST=Ensured PRSTS bit 4 is cleared after a reboot and S3 and S5 work
correctly.
Change-Id: I356e00ece851961135b4760cebcdd34e8b9da027
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181984
Reviewed-on: http://review.coreboot.org/5034
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When CONFIG_ELOG is selected the reset, power, and wake
events are logged in the eventlog.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Various resets and wake sources. Interrogated eventlog
to ensure results are expected.
Change-Id: Ia68548562917be6c2a0d8d405a5b519102b8c563
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181983
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5033
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The memory reference code doesn't maintain some of
the registers which contain valuable information in order
to log correct reset and wake events in the eventlog. Therefore
snapshot the registers which matter in this area so that
they can be consumed by ramstage.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Did various resets/wakes with logging patch which
consumes this structure. Eventlog can pick up reset
events and power failures.
Change-Id: Id8d2d782dd4e1133113f5308c4ccfe79bc6d3e03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181982
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The C0 part uses a new cpuid.
BUG=None
BRANCH=squawks,rambi
TEST=None.
Change-Id: Iddf1bc4d6f7bbec3ca92bff8edf613e00a4b4286
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181980
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5031
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The BISOC.EXIT_SELF_REFRESH_LATENCY field should
not be updated from the default.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180730
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5025
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When employing vboot firmware verification the reference
code loading should load from the verified firmware
section. Add this ability.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted rambi. Noted firmware being loaded
from rw verified area. Also noted S3 resume loading
from cached area.
Change-Id: I114de844f218b7573cf90107e174bf0962fdaa50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180026
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5023
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|