summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-07-29soc/intel/tigerlake: Configure TCSS D3Hot and D3ColdJohn Zhao
Update configuration for both of TCSS D3Hot and D3Cold. It is expected D3Hot is enabled for all platforms. Because there are known limitations for D3Cold enabling on pre-QS platform, this change reads cpu id and disables D3Cold for pre-QS platform. For QS platform, D3Cold is configured to be enabled. BUG=None TEST=Verified D3Hot is enabled, D3Cold is disabled for pre-QS (cpu:806c0) and enabled for QS (cpu:0x806c1). Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I534ddfefcd182f5b35aa5e8b461f0920d375a66d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43980 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Divya S Sasidharan <divya.s.sasidharan@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
Currently HDA gets enabled by the option EnableAzalia, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HDA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableAzalia setting. Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HECI3 depending on devicetree configurationFelix Singer
Currently HECI3 gets enabled by the option Heci3Enabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HECI3 controller. I checked all corresponding mainboards if the devicetree configuration matches the Heci3Enabled setting. Change-Id: I4f99d434dfee49a9783e38c3910b9391d479cb83 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43864 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the eMMC controller. I checked all corresponding mainboards if the devicetree configuration matches the ScsEmmcEnabled setting. Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
Currently TraceHub gets enabled by the option EnableTraceHub, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the TraceHub controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableTraceHub setting. Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
Currently SMBus gets enabled by the option SmbusEnable, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SMBus controller. I checked all corresponding mainboards if the devicetree configuration matches the SmbusEnable setting. Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
Currently LAN gets enabled by the option EnableLan, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the LAN controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableLan setting. Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29src/soc/rockchip: Add missing <{stddef,stdint}.h>Elyes HAOUAS
Change-Id: I0b7bdd9f46846bc9c3d9672b50dfe2fb166fcb78 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-29soc/intel/tigerlake: Set default USB3 de-emphasis to -3.5dBDuncan Laurie
The HSIO tuning guide recommendation for the default USB3 settings is to have de-emphasis set to -3.5dB with the equation 20*log(X/64). 0x29 results in a value close to -3.5dB and it is the value that was used for the default on past platforms so I used it here as well. BUG=b:160721468 TEST=Ensure WWAN device does not disconnect during use. Change-Id: Ia594996cb55523dacce0d4bef98cc217321c62de Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-29soc/intel/jasperlake: Clean up report_cpu_info() functionUsha P
This patch uses the fill_processor_name function in order to fetch the CPU Name. TEST = Successfully able to build boot Waddledoo and verify the cpu_name from CPU log "CPU: Genuine Intel(R) CPU 0000 @ 1.10GHz". Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I532e05d9bb71fdff24e086e81ec72ffe8dc2c22d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43480 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29util/apcb: Strip SPD manufacturer informationRob Barnes
Strip manufacturer information from SPDs before injecting into APCB. This allows more flexibility around changing DRAM modules in the future. BUG=b:162098961 TEST=Boot, dump memory info Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I1bbc81a858f381f62dbd38bb57b3df0e6707d647 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-29src/soc/samsung/exynos{5250,s5420}: Add missing <{stddef,stdint}.h>Elyes HAOUAS
Change-Id: I34b8083eb14d5f82699cf92744000a416d2816ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-07-28soc/amd/picasso: Add controls for SMT and downcoringMarshall Dawson
BUG=b:159198385 TEST=confirm both using Mandolin Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I91654817608ab62e4104959b8876333911b90175 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43299 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28src/soc/amd: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: Icaeda969cae52d9c62d976db4ead0e734efa838c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28soc/amd/picasso: Enable VBNV_BACKUP_TO_FLASH for psp_verstageMartin Roth
Enable the Kconfig flag VBOOT_VBNV_CMOS_BACKUP_TO_FLASH for psp_verstage to save the vbnv data to the SPI rom. BUG=b:161366241 TEST=Boot Morphius, Read rom from SPI and extract the RW_NVRAM region. See that it's getting updated. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I0d4b92fa321a8409468b8d8fc40be0d4b57b664b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43487 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/amd/picasso: Init SPI in psp_verstageMartin Roth
SPI needs to be initialized to save VBNV (Vboot Non-Volatile memory) to flash. BUG=b:159811539 TEST=Build & boot. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Iebf3ed3f5d6be0dda717d91d5b2fbcf2a1cc43cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/43308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-28soc/amd/picasso/Makefile.inc: force an error if PSPBTLDR_FILE is not setRonald G Minnich
Currently, if PSPBTLDR_FILE is empty, the md5sum will hang forever on stdin, leading to the appearance of a hung script. This is confusing. There's no option to md5sum to say "you must use this file", so instead, use dd with if to ensure we at least get an error if the file is not found. Not optimal, but better than what we have now. Change-Id: Ia13035bc592bdf2a515dfd2e052ae9135e218612 Signed-off-by: Ronald G Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28src: Never set ISA Enable on PCI bridgesAngel Pons
Looks like no one really knows what this bit would be useful for, nor when it would need to be set. Especially if coreboot is setting it even on PCI *Express* bridges. Digging through git history, nearly all instances of setting it on PCIe bridges comes from i82801gx, for which no reason was given as to why this would be needed. The other instances in Intel code seem to have been, unsurprisingly, copy-pasted. Drop all uses of this definition and rename it to avoid confusion. The negation in the name could trick people into setting this bit again. Tested on Asrock B85M Pro4, no visible difference. Change-Id: Ifaff29561769c111fb7897e95dbea842faec5df4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-07-28soc/intel/braswell/fadt.c: Use `ACPI_ADDRESS_SPACE_IO` macroAngel Pons
Tested with BUILD_TIMELESS=1, Facebook fbg1701 remains identical. Change-Id: Ie53a61c0ebb71bd7f2f9e931c175f35c3646ac6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43930 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
All boards disable PIRQs, except purism/librem_bdw. Since IRQ0 is invalid and modern OSes don't use PIRQ routing, disable the PIRQs. Change-Id: I93b074474c3c6d4329903cab928dc41e1d3a3fb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28soc/intel/cannonlake: Configure SataPwrOptEnable only if SATA is enabledFelix Singer
Change-Id: I522dc7287c85b304f6fc62c0c554e4d062c3c61c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner
2020-07-28soc/intel/apollolake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: Ieeec987dc2bfe5bdef31882edbbb36e52f63b0e6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43899 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/intel/jasperlake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: I744939bee3d51ac25c1cc2dcd3359fe571c9e408 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43898 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/intel/tigerlake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: I791273e5dd633cd1d6218b322106e2f62a393259 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43897 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28Revert "src: Remove unused include <cpu/x86/smm.h>"Patrick Rudolph
This reverts commit 6f739184dd153e0f7c3fa42990e008578b51b2c1. Fixes compiling the SMMSTORE driver. Change-Id: I3b4d4063ded50529bea48f8d865c1689fe9e26d1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-27soc/amd: Use spi_writeX & spi_readX for all spi accessesMartin Roth
BUG=b:161366241 TEST=Build & boot Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ied7789e9315c75174df9a686c831c5a969ce3bfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/43773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-27soc/amd/common: Move spi access functions into their own fileMartin Roth
Because there was a lot of discussion about the size increase, I also looked at the impact of calling the get_spi_bar() function vs reading spi_base directly and just not worring about whether or not spi_base was already set. Using the spi_base variable directly is 77 bytes bytes for all 6 functions. it's roughly double the size to call the function at 153 bytes. This was almost entirely due to setting up a call stack. If we add an assert into each function to make sure that the spi_base variable is set, it doubles from the size of the function call to 333 bytes. For my money, the function call is the best bet, because it not only protects us from using spi_base before it's set, it also gets the value for us (at least on x86, on the PSP, it still just dies.) BUG=b:161366241 TEST: Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-27soc/amd/picasso: Set __USER_SPACE__ for psp_verstageMartin Roth
Mark that psp_verstage is running in userspace so that it won't run the code in dcache_clean_all() and hang the system. BUG=b:161554141 TEST=Run board through a bunch of recovery cycles. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I936dcec18a2be9ec8636ce77bb0954f4fc58153e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27soc/amd/picasso: make USB over-current pin mapping configurableFelix Held
Neither the family 17h model 10-1Fh PPR nor the internal FSP source seems to have the mapping of the USB OC pins to the four bit values, so this is based on the information from the family 15h model 70-7Fh BKDG which also corresponds to what I'd have expected here. BUG=b:162010077 Change-Id: I581ef1d730e9d729d9849d7e73ef1c1b67b2c4cf Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27soc/intel/jasperlake: Invoke PCIe root port swappingKarthikeyan Ramasubramanian
Invoke PCIe root port devicetree update to swap the enabled root port devices with the disabled devices. BUG=b:162046161 TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is swapped with the PCIe device 1c.0 corresponding to Root port 1. Change-Id: I7d422014a2f5cafc41296ce0a2c116c82aefb0d7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43835 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/tigerlake: Disable CPU PCIe in FSPShaunak Saha
In TGL SoC we have PCH and CPU side PCIe support. This patch skips CPU side PCIe enablement in FSP if device is disabled in devicetree. Disabling the initialization of CPU PCIe saves ~30ms in FspSiliconInit! BUG=b:158573805 BRANCH=None TEST=Build and boot volteer and TGL RVP. Using cbmem tool measure the boot time. FspSilicontInit time is reduced by ~30ms with this patch. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I7e8512d22b1463bc4207f80b16dcfb5d00ef4b46 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42557 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/tigerlake: Disable VT-d and no DMAR table for pre-QS platformJohn Zhao
Enabling VT-d on pre-QS silicon may have issues like rendering the Thunderbolt driver useless. This change will ensure that VT-d is disabled for pre-QS silicon and enabled for QS. BUG=b:152242800,161215918,158519322 TEST=Validated VT-d is disabled for pre-QS (cpu:0x806c0) and enabled for QS (cpu:0x806c1). Kernel walks through ACPI tables. If VT-d is disabled and no DMAR table exists, IOMMU will not be enabled. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I98a9f6df185002a4e68eaa910f867acd0b96ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-26soc/intel/common/basecode: Implement CSE update flowRizwan Qureshi
The following changes are done in this patch: 1. Get the CSE partition info containing version of CSE RW using GET_BOOT_PARTITION_INFO HECI command 2. Get the me_rw.version from the currently selected RW slot. 3. If the versions from the above 2 locations don't match start the update - If CSE's current boot partition is not RO, then * Set the CSE's next boot partition to RO using SET_BOOT_PARTITION HECI command. * Send global reset command to reset the system. - Enable HMRFPO (Host ME Region Flash Protection Override) operation mode using HMRFPO_ENABLE HECI command - Erase and Copy the CBFS CSE RW to CSE RW partition - Set the CSE's next boot partition to RW using SET_BOOT_PARTITION HECI command - Trigger global reset - The system should boot with the updated CSE RW partition. TEST=Verified basic update flows on hatch and helios. BUG=b:111330995 Change-Id: I12f6bba3324069d65edabaccd234006b0840e700 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26soc/amd/common/block/psp/psp_smm.c: Add missing <string.h>Elyes HAOUAS
'memset' needs <string.h>. Change-Id: Idc1d72e92c97cd5139ae7439aadb575ef011129a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42342 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src/soc/qualcomm: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I6b89bd9616b3f091d6694f9cc20b4bd1a74aad3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/mediatek: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I8e4a7af68a52d82117b8b091fa448bb6ad40ae7d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/intel: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I674e3e423e06ee869366ebbd7c9d4248a2f3d9d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIGMaxim Polyakov
This macro is not correct because the RX Level/Edge Configuration (trig) and the GPIO Tx/Rx Buffer Disable (bufdis) fields in DW0 register do not affect on the pad in the native function mode. This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: Ic0416e3f67016c648f0886df73f585e8a08d4e92 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Michael Niewöhner
2020-07-26soc/intel/common/hda: Add HDA ID for Jasper Lakeyan.liu
Currently, audio is not working on Boten, caused by the coreboot HDA driver not being run as the Jasper Lake PCI ID is missing. So, add the Jasper Lake ID. BUG=b:160651126 BRANCH=NONE TEST=Connect speaker to audio jack, and verify sound is played. Signed-off-by: Yan Liu <yan.liu@bitland.corp-partner.google.com> Change-Id: Ib62c332d8d87201b3e6903251d824e1c3e06cd68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43441 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/jasperlakelake: Rename pch_init() codeUsha P
Rename the pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot Waddledoo successfully. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Iaa0a41f3b5972251d6cd9359bbb46d392196b2e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Update bare access to BOOL CONFIG_ vals to CONFIG()Martin Roth
BOOL type Kconfig values should be used through the CONFIG() macro. These instances were not, so update them. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Change BOOL CONFIG_ to CONFIG() in comments & stringsMartin Roth
The Kconfig lint tool checks for cases of the code using BOOL type Kconfig options directly instead of with CONFIG() and will print out warnings about it. It gets confused by these references in comments and strings. To fix it so that it can find the real issues, just update these as we would with real issues. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove whitespace between 'sizeof' and '('Elyes HAOUAS
Change-Id: Iaf22dc1986427e8aa4521b0e9b40fafa5a29dbbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26{sb,soc}/intel/**/*.c: Use macros for PCI COMMAND bitsAngel Pons
We have definitions for the bits in the PCI COMMAND register. Use them. Also add spaces around bitwise operators, to comply with the code style. Change-Id: Icc9c06597b340fc63fa583dd935e42e61ad9fbe5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-26soc/amd/common: Refactor and consolidate code for spi baseMartin Roth
Previously, the spi base address code was using a number of different functions in a way that didn't work for use on the PSP. This patch consolidates all of that to a single saved value that gets the LPC SPI base address by default on X86, and allows the PSP to set it to a different value. BUG=b:159811539 TEST=Build with following patch to set the SPI speed in psp_verstage. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I50d9de269bcb88fbf510056a6216e22a050cae6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43307 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/amd/picasso: Update postcode valueMartin Roth
I accidentally had the same value for two different postcode entries. Fix that. BUG=None TEST=Watch postcodes in psp_verstage Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Id0bf18efc7e79278a21683c11a1084d2a7d97e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26Kconfig: Remove unnecessary choice namesMartin Roth
The only reason to use a named choice statement is if you plan on having the choice statement in multiple places. Since none of these are used in multiple places, we can get rid of the names. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie5f84e9dc38050234976bd193ac5fbf649e564f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26smp/spinlock: Do not define barrier() globallyKyösti Mälkki
It's not stricly related to spinlocks. If defined, a better location should be found and the name collisions with other barrier() defined in nb/intel solved. Change-Id: Iae187b5bcc249c2a4bc7bee80d37e34c13d9e63d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43810 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26arch/x86: Move cpu_relax()Kyösti Mälkki
It's not related to spinlocks and the actual implementation was also guarded by CONFIG(SMP). With a single call-site in x86-specific code, empty stubs for other arch are currently not necessary. Also drop an unused included on a nearby line. Change-Id: I00439e9c1d10c943ab5e404f5d687d316768fa16 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43808 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 05:33:09 +0000