summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2016-09-15driver/intel/fsp20: move lb_framebuffer functionNaresh G Solanki
move lb_framebuffer function in soc/intel/apollolake to driver/intel/fsp20 so that fsp 2.0 bases soc's can use common lb_framebuffer function. Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15soc/intel/skylake: Add FSP 2.0 support in romstageBarnali Sarkar
Populate SoC related Memory initialization params. Post memory init, set DISB, setup stack and MTRRs using the postcar funtions provided in postcar_loader.c. TEST=Build and boot kunimitsu, dram initialization done. ramstage is loaded. Change-Id: I8d943e29b6e118986189166d92c7891ab6642193 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14lpss_i2c: Add Kconfig option to enable debugDuncan Laurie
It is very useful to have the ability to see I2C transactions performed by the host firmware. This patch adds a simple Kconfig option that will enable debug output. Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16590 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14lpss_i2c: Change handling of controller enable/disableDuncan Laurie
This change modifies the lpss_i2c driver to behave more like the Linux kernel driver. In particular the controller is only enabled when processing a transaction, and is disabled after. This means that errors in one transaction will not affect later transactions. Also when disabling the controller the code is supposed to wait on the enable bit in the "enable status" register and not in the enable control register. In order to get access to this register the reg map was expanded to include all registers. This was tested with the cr50 TPM driver to ensure that if a transaction does fail that it can be successfully retried instead of the bus being unusable. Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16589 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14soc/intel/apollolake: Update PL1 value in RAPL MMIO registerSumeet Pawnikar
Due to an incorrect value set for the power limit PL1, the system is not able to leverage full TDP capacity. FSP code sets the PL1 value as 6W in RAPL MMIO register based on fused soc tdp value. This RAPL MMIO register is a physically separate instance from RAPL MSR register. This patch sets PL1 value to 15W in RAPL MMIO register. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16595 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14soc/intel/apollolake: Add PM methods to power gate PCIeVaibhav Shankar
This implements GNVS variable to store the address of PERST_0, _ON/_OFF methods to power gate PCIe during S0ix entry, and PERST_0 assertion/de-assertion methods. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14soc/intel/apollolake: initialize GNVS structure to 0Aaron Durbin
The code was not previously initializing the GNVS structure to all 0's in the ACPI write tables path. Fix this and also rearrange the ordering of updating the fields to only handle the chip_info specific bits till last such that most of the structure is filled in prior to bailing out in the case of a bad devicetree. Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16597 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-13soc/marvell/mvmap2315: Add DDR driverHakim Giydan
This driver is only a prototype driver, real driver will be integrated at a later time. Testing: booted successfully. Change-Id: I372764962e96e5c9c827d524bc369978c5c1fda8 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16554 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add MCU driverHakim Giydan
Testing: booted successfully. Change-Id: I003f6929b00476d46be931773cd35418fe6622a6 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add WDT driverHakim Giydan
Testing: booted successfully. Change-Id: Ie9c9297f321c838f86e5536aab29f67a0eeb053d Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15519 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add NVM driverHakim Giydan
This driver uses BootROM callback to read and write to the nvm using I2C. Testing: booted successfully. Change-Id: I8639af3e004f6631d7e596507c106159835f979f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add A2BUS driverHakim Giydan
A2BUS is a custom fabric. Testing: booted successfully. Change-Id: If6e61f5aa30217eb601ac460d9306166b8433569 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15523 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add PMIC driverHakim Giydan
Testing: booted successfully. Change-Id: I168206585f403d2259efe424e563982be661df0b Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16149 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add APMU driverHakim Giydan
APMU is the AP power management unit. It is a separate processor that handles enabling individual power rails. This driver handles sending and receiving commands from/to APMU. Testing: booted successfully. Change-Id: I5ae07849f8432bece8a0ae9066a3f786e6e8d2fe Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add load_validate driverHakim Giydan
Load_validate: it loads and validates images from flash using hash values stored in the BDB. Testing: booted successfully. Change-Id: I0b00e8c60ed76622d03cb232d5c4273b4077aae7 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16148 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add flash driverHakim Giydan
Testing: booted successfully. Change-Id: Iaeff9f01dbfad7f313aa237e8c71c36c4ed1e06f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15509 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add gpio driverHakim Giydan
Testing: booted successfully. Change-Id: I89dee1bbf8b68460897f64bf673b328533e70cd4 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15508 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell: Add stub implementation of MVMAP2315 SOCHakim Giydan
Most things still need to be filled in, but this will allow us to build boards which use this SOC. Nvidia Tegra210 SOC and Rochchip Rk3399 SOC has been used as templates to create this directory. Change-Id: I8cc3e99df915bb289a2f3539db103cd6be90a0b2 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13fsp_broadwell_de: Add Kconfig switch for SERIRQ operation modeWerner Zeh
The serial IRQ (SERIRQ) used by the LPC interface can operate either in continuous or in quiet mode. Add a Kconfig switch to select the desired mode. This switch can now be used on mainboard level to enable the needed mode per mainboard. Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPCWerner Zeh
Since this mainboard provides 4 COM ports on LPC, enable decoding of the corresponding addresses using the generic LPC decode registers. Change-Id: I0e93d40dca01d55f3567a18c7ec02269e3bec466 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-12fsp_broadwell_de: Correct access to SIRQ_CNTL registerWerner Zeh
The serial IRQ configuration register is only 8 bit wide so switch the PCI access from 16 bits to 8 bits. Change-Id: Ia9fbc02251e00b31440bf103e2afc2ff285b7f2e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16534 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09soc/intel/apollolake: Add functions to calculate GPIO addressVaibhav Shankar
Provide iosf and GPIO functions for GPIO address calculation. BUG=chrome-os-partner:55877 Change-Id: I6eaa1fcecf5970b365e3418541c75b9866959f7e Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16349 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-08fsp_broadwell_de: Adjust printed address in SPI debug messagesWerner Zeh
For an unknown reason the printed address in the SPI debug messages is modified before it is printed by subtracting the constant 0xf020 from the passed in address. What I suppose this debug code should do is to print the used register address within the SPI controller while any parts of this address that belongs to the SPI base address should be omitted. To fix that remove the subtraction of 0xf020 and adjust the address mask to 0x3ff so that only the offset to the registers inside the SPI controller will be visible in the debug messages. In addition switch to uint8_t and friends over u8 to sync up with used types in this file. Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07commonlib: move DIV_ROUND macros from nvidia/tegraArthur Heymans
DIV_ROUND_CLOSEST and DIV_ROUND_UP are useful macros for other architectures. This patch moves them from soc/nvidia/tegra/types.h to commonlib/include/commonlib/helpers.h . Change-Id: I54521d9b197934cef8e352f9a5c4823015d85f01 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16415 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07soc/apollolake: Enable/disable Audio clk and power gate in devicetree.cbVenkateswarlu Vinjamuri
BUG=chrome-os-partner:56034 Change-Id: Id88d262b32dea468536575117fc34d52076a3096 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16423 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06fsp_baytrail: Refactor code for SPI debug messagesWerner Zeh
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather then on preprocessor level to ensure that the code is compiled even if the switch is not selected. In addition the following two changes are introduced: 1. Prepend the debug messages with 'SPI:' to make the output more meaningful. 2. Change the address mask from 0xffff to 0x3ff and remove the subtraction of the constant value 0xf020 in order to print only the register offset within the SPI controller and avoid the visibility of any fragments from SPI base address. 3. Switch to uint8_t and friends instead of u8 to sync up with other code in the same file. Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06google/reef: Enable 20K pull ups for LPC CLKRUN and LAD0:3 linesShamile Khan
The pull up for CLKRUN is required to resolve keyboard slowness and malfunctioning observed on some reef systems. The CLKRUN signal was probed and found to be floating when the pull up was not enabled. Also Added pull ups for the LPC Multiplexed command, address and data lines LAD0:3 because the LPC Interface specification requires them. BUG=chrome-os-partner:55586 BRANCH=none TEST=When a key is pressed, the character is immediately visible on the screen. Also the interrupt count for i8042 increments immediately in /proc/interrupts. Change-Id: I16df1a0301a3994c926a609f61291761219f9e01 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/16426 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04lpss_i2c: Increase default timeout to 4msDuncan Laurie
Increase the default timeout in the LPSS I2C driver to 4ms from 2ms. During testing with some slower devices I found that the existing timeout could be too short leading to transaction failures. Change-Id: Ied86c7a0aa26d55b31f447c5938803c194d0045e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16392 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02apollolake: relocate fsp header files to vendorcodeBrandon Breitenstein
FSP header files should be located in vendorcode, not soc directory. This patch includes changes any references to the old location to the new location. Change-Id: I44270392617418ec1b9dec15ee187863f2503341 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02drivers/intel/fsp2_0: Make FSP Headers Consumable out of BoxBrandon Breitenstein
The following patch is based off of the UEFI 2.6 patch. The FSP header files are temporarily staying in soc/intel/apollolake and FspUpd.h has been relocated since the other headers expect it to be in the root of an includable directory. Any struct defines were removed since they are defined in the headers and no longer need to be explicity declared as struct with the UEFI 2.6 includes. BUG=chrome-os-partner:54100 BRANCH=none TEST=confirmed coreboot builds successfully Change-Id: I10739dca1b6da3f15bd850adf06238f7c51508f7 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com># Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16308 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-09-01soc/intel/apollolake: Use consistent convention for community namesFurquan Shaikh
Instead of using a mix of _N and _NORTH, _NW and _NORTHWEST for GPIO community names, follow one single convention. This allows for re-using macros easily. Change-Id: Icd9cf9ef70d03576d864688cf5d6946124c259c3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16353 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
Before, we calculate the pwm duties for cpu cores and centerlogic by hand, adding pwm_regulator.c to handle this. The default pwm design min/max voltage may be different between revs. With the pwm regulator, this patch changes the little cpu frequency from 600M to 1512M, and raises CPU voltage to 1.2V correspondingly. This also means we decide to drop the ES1 because it may fail to bootup with 1.5G ~ 1.2v. BRANCH=none BUG=chrome-os-partner:54376,chrome-os-partner:54862 TEST=Bootup on kevin board Change-Id: Id04c176bddfb9cdf3d25b65736e40249a85f6aa1 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: ee4365c787ec523b7ee1028ea100dcfbb331b3a9 Original-Change-Id: Ide75bbd92d1cbb14f934baeec0e38862bc08402b Original-Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/364410 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16368 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/broadcom/cygnus/ddr_init.c: Correct typo in POWER ON and POWER OK.Elyes HAOUAS
Change-Id: I5b69a8429eb2f7add08bc134d5d2366a1afe6a4f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16343 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-08-31src/soc: Add required space before opening parenthesis '('Elyes HAOUAS
Change-Id: Ifc47f103492a2cd6c818dfd64be971d34afbe0a4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16324 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-31skylake: Add initial FSP2.0 supportRizwan Qureshi
Add Initial pieces of code to support fsp2.0 in skylake keeping the fsp1.1 flow intact. The soc/romstage.h and soc/ramstage.h have a reference to fsp driver includes, so split these header files for each version of FSP driver. Add the below files, car_stage.S: Add romstage entry point (car_stage_entry). This calls into romstage_fsp20.c and aslo handles the car teardown. romstage_fsp20.c: Call fsp_memory_init() and also has the callback for filling memory init parameters. Also add monotonic_timer.c to verstage. With this patchset and relevant change in kunimitsu mainboard, we are able to boot to romstage. TEST= Build and Boot Kunimitsu with PLATFORM_USES_FSP1_1 Build and Boot Kunimitsu to romstage with PLATFORM_USES_FSP2_0 Change-Id: I4309c8d4369c84d2bd1b13e8ab7bfeaaec645520 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/16267 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
The romstage.c is more board related than soc specific, like setting the pwm regulators, so moving it to mainboard/gru. BRANCH=none BUG=chrome-os-partner:54819 TEST=Bootup on kevin board Change-Id: I83c6cde9f451480e47e2b4b549cedf65b345134c Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 35feeb07131a6a9de4adde035236987391833474 Original-Change-Id: If2bf245302eb4fb20bb089c1b3ffa03909722443 Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/375398 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16367 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-31soc/intel/apollolake: Disable Periodic Retraining per-SKUAndrey Petrov
Certain LPDDR4 models have some HW issues that can be worked around by turning off Periodic Retraining feature in the memory controller. Add option to disable PR per SKU. BUG=chrome-os-partner:55466 TEST=run RMT test, pass Change-Id: Ie7aa79586665f6d3a7edd854a9eef07e6a1b2ab8 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/16320 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Update FSP UPD header files for SIC 1.1.3Brandon Breitenstein
Update FSP Header files to provide UPD for periodic training disable. This is for the SIC 1.1.3/150_11 FSP release. BUG=chrome-os-partner:54100 BRANCH=none TEST=built coreboot image with new headers for reef Change-Id: I2ba11aa3d2d664c1d34e39c4c8144fb1c4f2149a Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/16352 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-31soc/intel/apollolake: Gather microcode revisionJohn Zhao
Expose get_microcode_info in cpu initialization. Microcode revision is retrieved and stored into log file at verstage. BUG=chrome-os-partner:56544 BRANCH=None TEST=Built coreboot image and validate log file Change-Id: I1e792e70f1318df64b4b85a319700013f3757952 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16311 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30fsp_broadwell_de: Refactor code for SPI debug messagesWerner Zeh
Currently boards based on fsp_broadwell_de fail to compile if the config switch CONFIG_DEBUG_SPI_FLASH is selected. The error is caused by the usage of const for the address pointer in the functions writeb_, writew_ and writel_. The reason why it stayed hidden for so long is the fact that the switch is used with the preprocessor and nobody really selects it until there is a bug one want to find in this area. This patch fixes the parameter type definition which solves the error. In addition the config switch is not used on preprocessor level anymore but instead on compiler level. This ensures that at least the code syntax is checked on build time even if the config option is not selected. Also prefix the messages with "SPI:" to make them more meaningful in a full log. Change-Id: I3514b0d4c08bf5a4740f2632641e09af1b3aaf3a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16347 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-30soc/intel/skylake: Include Kabylake specific IGD Device IDsBarnali Sarkar
Add Kabylake specific Graphics IDs in report_platform.c and igd.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-30soc/intel/apollolake: add option for SLP_S3_L assertion widthAaron Durbin
In order to provide time for the S0 rails to discharge one needs to be able to set the SLP_S3_L assertion width. The hardware default is 60 microcseconds which is not slow enough on most boards. Therefore provide a devicetree option for the mainboard to set accordingly for its needs. An unset value in devicetree results in a conservative 2 second SLP_S3_L duration. BUG=chrome-os-partner:56581 Change-Id: I6c6df2f7a181746708ab7897249ae82109c55f50 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16326 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-28soc/intel/apollolake: Add CQOS CAR implementationAndrey Petrov
Add new option to set up Cache-As-RAM by using CQOS, Cache Quality of Service. CQOS allows setting ways of cache in no-fill mode, while keeping other ways in regular evicting mode. This effectively allows using CAR and cache simultaneously. BUG=chrome-os-partner:51959 TEST=switch from NEM to CQOS and back, boot Change-Id: Ic7f9899918f94a5788b02a4fbd2f5d5ba9aaf91d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15455 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Update stage link addresses for 768 KiB cacheAndrey Petrov
Update link addresses for romstage and verstage. Also update FSP-M relocation address. BUG=chrome-os-partner:51959 Change-Id: Ia51a341f05b33151ea5fda9f8620408b5a15bc19 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15454 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28soc/intel/apollolake: Handle CAR sizes other than 1 MiBAndrey Petrov
Since whole L2 (1MiB) is not used, it is possible to shrink CAR size to 768 KiB. Since 768 KiB is not power of two, 2 MTRRs are used to set it up. This is a part of CQOS enabling. BUG=chrome-os-partner:51959 Change-Id: I56326a1790df202a0e428e092dd90286c58763c5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15453 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-28src/soc: Remove unnecessary whitespace before "\n" and "\t"Elyes HAOUAS
Change-Id: I89bc8b26f2dba4770aea14b8bbc7e657355e8c59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16325 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-27rockchip/rk3399: Enable ramstage compression, shuffle around memlayoutJulius Werner
Since we now have so much more room for activities in our romstage SRAM section, we can easily fit the LZMA decompressor to enable ramstage compression. Also shuffle around memlayout sections a little more to make use of unused space, and balance out leftover memory so that all sections that might need future expansion have a reasonable amount. Change-Id: I47f2d03e520fc3103ef04257b4ba7e93874b8956 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16334 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
This patch changes Gru SDRAM parameters from structures that just get compiled into the romstage to individual CBFS files. This allows us to only load the parameter set we need for the board we're booting from flash, which reduces our boot time and the SRAM memory footprint required to hold the romstage. TEST=Booted Kevin. Change-Id: Ie88a515cbdb19a794ca0a230a56bcc82bed1e550 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16274 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 03:53:00 +0000