Age | Commit message (Expand) | Author |
2015-10-13 | t132: Add TIMESTAMP region to memlayout.ld | Furquan Shaikh |
2015-10-11 | skylake: add support for verstage | Aaron Durbin |
2015-10-11 | soc/intel/common: use prog_locate() for finding fsp.bin | Aaron Durbin |
2015-10-11 | skylake: Leave SPI controller enabled | Lee Leahy |
2015-10-11 | skylake: SPI code cleanup | Lee Leahy |
2015-10-11 | tegra132: increase romstage size for vboot | Aaron Durbin |
2015-10-11 | vboot: remove remnants of VBOOT_STUB | Aaron Durbin |
2015-10-11 | intel fsp1_1: prepare for romstage vboot verification split | Aaron Durbin |
2015-10-11 | soc/intel/common: remove chipset specific calls | Aaron Durbin |
2015-10-11 | intel SOC common: Remove unused parameters | Lee Leahy |
2015-10-11 | Braswell: Modify CB to accomodate new FSPv83 | Subrata Banik |
2015-10-11 | Skylake: remove the out-dated VR config and un-needed 24mhz calibration | robbie zhang |
2015-10-11 | skylake: ajdust cache-as-ram region to 64KiB | Aaron Durbin |
2015-10-11 | intel: update common and FSP cache-as-ram parameters | Aaron Durbin |
2015-10-11 | Do not show HAVE_MTC on non-tegra210 | Vladimir Serbinenko |
2015-10-07 | cbfs: add struct cbfsf | Aaron Durbin |
2015-10-05 | Add EM100 'hyper term' spi console support in ramstage & smm | Martin Roth |
2015-10-04 | drivers/uart/Kconfig: Select 8250 mem when 8250 mem32 is enabled | Alexandru Gagniuc |
2015-10-02 | tegra124: use the common verstage flow | Aaron Durbin |
2015-10-02 | broadcom/cygnus: remove verstage.c | Aaron Durbin |
2015-10-01 | tegra132/tegra210: remove verstage.c | Aaron Durbin |
2015-10-01 | intel/fsp_baytrail: Remove unused MICROCODE_INCLUDE_PATH from Kconfig | Werner Zeh |
2015-09-30 | vboot: provide a unified flow for separate verstage | Aaron Durbin |
2015-09-30 | cpu: microcode: Use microcode stored in binary format | Alexandru Gagniuc |
2015-09-29 | skylake: select HAVE_INTEL_FIRMWARE | Aaron Durbin |
2015-09-29 | intel: auto include intel/common/firmware | Aaron Durbin |
2015-09-28 | skylake: Work around issue in ACPI interpreter | Duncan Laurie |
2015-09-28 | skylake: ACPI: Remove Configurable TDP support code | Duncan Laurie |
2015-09-24 | coreboot: move TS_END_ROMSTAGE to one spot | Aaron Durbin |
2015-09-23 | chromeos: vboot and chromeos dependency removal for sw write protect state | Paul Kocialkowski |
2015-09-22 | linking: link bootblock.elf with .data and .bss sections again | Aaron Durbin |
2015-09-22 | coreboot: introduce commonlib | Aaron Durbin |
2015-09-17 | broadwell: Switch to using common ACPI _SWS code | Duncan Laurie |
2015-09-17 | braswell: Switch to using common ACPI _SWS code | Duncan Laurie |
2015-09-17 | skylake: Use common ACPI _SWS code | Duncan Laurie |
2015-09-17 | Skylake: update C state latency and power numbers | robbie zhang |
2015-09-17 | t210: lp0_resume: Configure unused SDMMC1/3 pads for low power leakage | Yen Lin |
2015-09-17 | intel/skylake: Create "RtcLock" Silicon UPD from coreboot | Barnali Sarkar |
2015-09-17 | intel/common: Add common code for filling out ACPI _SWS | Duncan Laurie |
2015-09-16 | Move final Intel chipsets with ME to intel/common/firmware | Martin Roth |
2015-09-10 | fsp1_1: provide binding to UEFI version | Aaron Durbin |
2015-09-10 | intel/skylake: HAVE_UART_MEMORY_MAPPED doesn't exist anymore | Patrick Georgi |
2015-09-10 | skylake: Move ACPI init to SOC instead of mainboard | Duncan Laurie |
2015-09-10 | intel/common: Print board ID if enabled | Duncan Laurie |
2015-09-10 | skylake: Enable DPTF based on devicetree setting | Duncan Laurie |
2015-09-10 | Skylake: Print GPIO MMIO base and pad config using gpio_debug token | Subrata Banik |
2015-09-09 | skylake: dptf: Add TSR3 thermal sensor and CPU code cleanup | Duncan Laurie |
2015-09-09 | braswell: acpi: Allow DPTF thresholds to be defined at board-level | Shawn Nematbakhsh |
2015-09-09 | intel/skylake: ACPI: Clean up formatting in and fix ASL code | Duncan Laurie |
2015-09-09 | verstage: use common program.ld for linking | Aaron Durbin |