summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2015-06-21Remove obsolete EARLY_CONSOLE usageMartin Roth
The EARLY_CONSOLE Kconfig symbol was removed in commit 48713a1b - console: Drop EARLY_CONSOLE option The arm64 and mips directories don't even have early_console.c to include. Change-Id: Idc60ffb2bac2b180f4fdd0adf5c411e1f692a846 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10615 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-21Remove old HAVE_UART_MEMORY_MAPPED select statementsMartin Roth
The HAVE_UART_MEMORY_MAPPED symbol is no longer present, so these don't actually select anything. Change-Id: I6d0eb610e48a4506ac7449ac677ee67981d0ff0d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10608 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-12pistachio: add DDR3 initialization codeIonela Voinescu
Initialization for the Winbond W631GG6KB part using Synopsys DDR uMCTL and DDR Phy. This code adds a separate function for DDR3 initialization and moves all the necessary defines in a separate header file. The programming procedure that is executed at power up to bring up the uMCTL, PHY and memories into a state where reads and writes to the memory can be performed is the following: 1. uPCTL (Universal DDR protocol controller) initialization The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH needed for driving the memory power-up sequence are programmed as a function of the internal timers clock frequency. Organization (memory chip specific) values are set (column/bank/row address width and number of ranks), together with other static values (latency, timing, power up configuration). All these values are static, provided by the datasheet, being determined by the memory type, size and frequency. 2. PHY initialization The PHY is programmed with datasheet provided values, specifying the initialization values for it to send to the external memory (timing parameters). Also, delay lines (DLL) and strength of drive pads are calibrated (based on external conditions: temperature, voltage, noise) and locked. After that, the PHY goes through a trainig process (also dependent on the current conditions at boot time) to establish precise timing configuration between the DDR clock and DQS (data strobe) and between DQS and DQ (data). 3. Memory power up 4. Switch from configuration state to access state. It was tested on Pistachio bring up board where DDR was initialized properly and ramstage executed correctly Change-Id: I3bcbce2044327a22fce09b184d85ee11228a6b2b Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/10529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-12pistachio: Use passive windowing as DQS gating schemeIonela Voinescu
Switching from active windowing DQS gating scheme to passive windowing mode resolves boot stability issues on chips found to have memory corruption issues during boot or memory tests. It was tested on Pistachio bring up board where DDR is initialized properly and ramstage executed correctly; We have cycled units over 12,000 times with no boot errors. This option was chosen over the alternative of using passive windowing mode for DQS training and after switching back to active mode, as this option was recommended by Synopsys. Using the alternative would give different timing values during training that were not longer accurate during normal activity. Change-Id: Ie604eddc0a9a982b2f89198f44deb88a01b7b322 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/10528 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10pistachio: sort included header filesIonela Voinescu
Place included header files in alphabetical order. Change-Id: Ice23178d1f07e2cb0178efbc7ce487d54bf3f708 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/10459 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-10pistachio: initialize cbmem area to be emptyIonela Voinescu
Use cbmem_initialize_empty() after DDR configuration so that cbmem is always initialized from scratch on each boot. Change-Id: Ic9ca34867b26aab82cf3154280694b6fb61ee11f Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/10458 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-10rockchip: rk3288: add HDMI related iomux configurationhuang lin
BUG=none BRANCH=none TEST=Boot from mickey board Change-Id: I6eadf52bddcf89011a112a8e5dee5e752556add9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e3c865f0bf8567c3183d7948a0f9e8361db70695 Original-Change-Id: I438527ee0870044f48b23a6842986e7cf166e191 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/276290 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/10477 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-09pistachio: increase romstage sizeIonela Voinescu
This change is necessary to support future additions to romstage. Change-Id: Ibb69994847945c7adbafbf2bc677b33821df8146 Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Reviewed-on: http://review.coreboot.org/10457 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-09stage_cache: use cbmem init hooksAaron Durbin
Instead of having the chipset code make the approrpiate calls at the appropriate places use the cbmem init hooks to take the appropriate action. That way no chipset code needs to be changed in order to support the external stage cache. Change-Id: If74e6155ae86646bde02b2e1b550ade92b8ba9bb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10481 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-09cbmem: add indicator to hooks if cbmem is being recoveredAaron Durbin
It can be helpful to certain users of the cbmem init hooks to know if recovery was done or not. Therefore, add this as a parameter to the hooks. Change-Id: I049fc191059cfdb8095986d3dc4eee9e25cf5452 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10480 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-09cbmem: Unify CBMEM init tasks with CBMEM_INIT_HOOK() APIKyösti Mälkki
Squashed and adjusted two changes from chromium.git. Covers CBMEM init for ROMTAGE and RAMSTAGE. cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API There are several use cases for performing a certain task when CBMEM is first set up (usually to migrate some data into it that was previously kept in BSS/SRAM/hammerspace), and unfortunately we handle each of them differently: timestamp migration is called explicitly from cbmem_initialize(), certain x86-chipset-specific tasks use the CAR_MIGRATION() macro to register a hook, and the CBMEM console is migrated through a direct call from romstage (on non-x86 and SandyBridge boards). This patch decouples the CAR_MIGRATION() hook mechanism from cache-as-RAM and rechristens it to CBMEM_INIT_HOOK(), which is a clearer description of what it really does. All of the above use cases are ported to this new, consistent model, allowing us to have one less line of boilerplate in non-CAR romstages. BRANCH=None BUG=None TEST=Built and booted on Nyan_Blaze and Falco with and without CONFIG_CBMEM_CONSOLE. Confirmed that 'cbmem -c' shows the full log after boot (and the resume log after S3 resume on Falco). Compiled for Parrot, Stout and Lumpy. Original-Change-Id: I1681b372664f5a1f15c3733cbd32b9b11f55f8ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/232612 Reviewed-by: Aaron Durbin <adurbin@chromium.org> cbmem: Extend hooks to ramstage, fix timestamp synching Commit 7dd5bbd71 (cbmem: Unify random on-CBMEM-init tasks under common CBMEM_INIT_HOOK() API) inadvertently broke ramstage timestamps since timestamp_sync() was no longer called there. Oops. This patch fixes the issue by extending the CBMEM_INIT_HOOK() mechanism to the cbmem_initialize() call in ramstage. The macro is split into explicit ROMSTAGE_/RAMSTAGE_ versions to make the behavior as clear as possible and prevent surprises (although just using a single macro and relying on the Makefiles to link an object into all appropriate stages would also work). This allows us to get rid of the explicit cbmemc_reinit() in ramstage (which I somehow accounted for in the last patch without realizing that timestamps work exactly the same way...), and replace the older and less flexible cbmem_arch_init() mechanism. Also added a size assertion for the pre-RAM CBMEM console to memlayout that could prevent a very unlikely buffer overflow I just noticed. BRANCH=None BUG=None TEST=Booted on Pinky and Falco, confirmed that ramstage timestamps once again show up. Compile-tested for Rambi and Samus. Original-Change-Id: If907266c3f20dc3d599b5c968ea5b39fe5c00e9c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/233533 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I1be89bafacfe85cba63426e2d91f5d8d4caa1800 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/7878 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05lib: Unify log2() and related functionsJulius Werner
This patch adds a few bit counting functions that are commonly needed for certain register calculations. We previously had a log2() implementation already, but it was awkwardly split between some C code that's only available in ramstage and an optimized x86-specific implementation in pre-RAM that prevented other archs from pulling it into earlier stages. Using __builtin_clz() as the baseline allows GCC to inline optimized assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and to perform constant-folding if possible. What was previously named log2f on pre-RAM x86 is now ffs, since that's the standard name for that operation and I honestly don't have the slightest idea how it could've ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm with Float result, whereas the Find First Set operation has no direct correlation to logarithms that I know of). Make ffs result 0-based instead of the POSIX standard's 1-based since that is consistent with clz, log2 and the former log2f, and generally closer to what you want for most applications (a value that can directly be used as a shift to reach the found bit). Call it __ffs() instead of ffs() to avoid problems when importing code, since that's what Linux uses for the 0-based operation. CQ-DEPEND=CL:273023 BRANCH=None BUG=None TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new log2() and __ffs() results on Falco for a bunch of test values. Change-Id: I599209b342059e17b3130621edb6b6bbeae26876 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/273008 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-04devicetree: Change scan_bus() prototype in device opsKyösti Mälkki
The input/output value max is no longer used for tracking the bus enumeration sequence, everything is handled in the context of devicetree bus objects. Change-Id: I545088bd8eaf205b1436d8c52d3bc7faf4cfb0f9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8541 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-04devicetree: Discriminate device ops scan_bus()Kyösti Mälkki
Use of scan_static_bus() and tree traversals is somewhat convoluted. Start cleaning this up by assigning each path type with separate static scan_bus() function. For ME, SMBus and LPC paths a bus cannot expose bridges, as those would add to the number of encountered PCI buses. Change-Id: I8bb11450516faad4fa33b8f69bce5b9978ec75e5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8534 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-02assets: abstract away the firmware assets used for bootingAaron Durbin
As there can be more than one source of firmware assets this patch generalizes the notion of locating a particular asset. struct asset is added along with some helper functions for working on assets as a first class citizen. Change-Id: I2ce575d1e5259aed4c34c3dcfd438abe9db1d7b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10264 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-02Revert "pistashio: bump up romstage size"Aaron Durbin
This reverts commit 701211a6e57a17ea861b4ad682dca7416fc9050e. Change-Id: Ib3e573548bff5c17ab30cfab3d833a2065d689c9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10222 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-06-02cbfs: new API and better program loadingAaron Durbin
A new CBFS API is introduced to allow making CBFS access easier for providing multiple CBFS sources. That is achieved by decoupling the cbfs source from a CBFS file. A CBFS source is described by a descriptor. It contains the necessary properties for walking a CBFS to locate a file. The CBFS file is then decoupled from the CBFS descriptor in that it's no longer needed to access the contents of the file. All of this is accomplished using the regions infrastructure by repsenting CBFS sources and files as region_devices. Because region_devices can be chained together forming subregions this allows one to decouple a CBFS source from a file. This also allows one to provide CBFS files that came from other sources for payload and/or stage loading. The program loading takes advantage of those very properties by allowing multiple sources for locating a program. Because of this we can reduce the overhead of loading programs because it's all done in the common code paths. Only locating the program is per source. Change-Id: I339b84fce95f03d1dbb63a0f54a26be5eb07f7c8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9134 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-02ipq806x: clear the RPM initialization Acknowledge bitSourabh Banerjee
The RPM initialization Acknowledge is cleared by writing 1 into bit-10 of the RPM_INT_ACK register. The existing code got it wrong and is writing zero to that bit. BRANCH=storm BUG=chrome-os-partner:39231 TEST=with this patch and an RPM firmware update, an SP4 device survived more than 1000 reboots in a row. Change-Id: Ibba296ed0571ad9403a0c51c7f82f07f185b4e83 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 13b4a0f093ba652ad6bccdfc4b3686c0741c6fe7 Original-Change-Id: I39e6ea50e0f66b4af68bdb868dd4437c34bb4524 Original-Signed-off-by: Viswanath Kraleti <vkraleti@codeaurora.org> Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/266969 Original-Reviewed-by: Manoj Juneja <mjuneja@qti.qualcomm.com> Reviewed-on: http://review.coreboot.org/10310 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-29intel/broadwell: Hide use of acpi_slp_typeKyösti Mälkki
Change-Id: I106779571df5168ec358ad1cc4dc4195639a7a7d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10359 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-29chromeos: always enable timestampsStefan Reinauer
Timestamps should not be forced on by a subset of chipsets. However, they are a requirement on Chrome OS platforms, so have CONFIG_CHROMEOS select it. Change-Id: I408c6b17aa8721a3abec69020084174e414a8940 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/10357 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2015-05-28smm: Merge configs SMM_MODULES and SMM_TSEGVladimir Serbinenko
SMM_TSEG now implies SMM_MODULES and SMM_MODULES can't be used without SMM_TSEG Remove some newly dead code while on it. Change-Id: I2e1818245170b1e0abbd853bedf856cec83b92f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10355 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-28Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: I0ac0c957738ce512deb0ed82b2219ef90d96d46b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10322 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-27Move TPM code out of chromeosVladimir Serbinenko
This code is not specific to ChromeOS and is useful outside of it. Like with small modifications it can be used to disable TPM altogether. Change-Id: I8c6baf0a1f7c67141f30101a132ea039b0d09819 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/10269 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-26fmap: new API using region_deviceAaron Durbin
Instead of being pointer based use the region infrastrucutre. Additionally, this removes the need for arch-specific compilation paths. The users of the new API can use the region APIs to memory map or read the region provided by the new fmap API. Change-Id: Ie36e9ff9cb554234ec394b921f029eeed6845aee Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9170 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26coreboot: introduce boot_deviceAaron Durbin
The boot_device is a region_device that represents the device from which coreboot retrieves and boots its stages. The existing cbfs implementations use the boot_device as the intermediary for accessing the CBFS region. Also, there's currently only support for a read-only view of the boot_device. i.e. one cannot write to the boot_device using this view. However, a writable boot_device could be added in the future. Change-Id: Ic0da796ab161b8025c90631be3423ba6473ad31c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10216 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26pistashio: bump up romstage sizeAaron Durbin
Making large changes in pieces is leading to a little bloat. Bump up the romstage size temporarily so that jenkins will be happy. Change-Id: I6f9facb4ca488cf41741a3ed6d0ed7f66d4778b3 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10220 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-26acpigen: Remove all explicit length trackingVladimir Serbinenko
Change-Id: I88248d78c01b4b4e42a097889b5f4ddfdac3d966 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7367 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2015-05-26acpi: Remove monolithic ACPIVladimir Serbinenko
All boards now use per-device ACPI. This patch finishes migration by removing transitional kludges. Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7372 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-05-23baytrail: Switch to per-device ACPIVladimir Serbinenko
Change-Id: I6a1b1daa291298c85e14f89aa47a0693837cec6f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7037 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-05-23Braswell: Use Baytrail as Comparison BaseLee Leahy
Add baytrail source for comparison with Braswell. BRANCH=none BUG=None TEST=None Change-Id: I5170addf41676d95a3daf070a32bcee085f8156d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10117 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-20acpi: make fill_slit and fill_srat into arguments.Vladimir Serbinenko
SLIT and SRAT are created this way only on amdk8 and amdfam10. This saves the need of having a lot of dummies. Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7052 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
DYNAMIC_CBMEM is only selected a couple of times but never declared or read. Remove it. Change-Id: I5016dac2c935d3f261001e9f388a8989540e93ae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10255 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-19Remove Kconfig variable that has no effectPatrick Georgi
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere (with no overlap), and never read. Remove it. Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10253 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-19arm64: Reorganize payload entry code and related KconfigsJulius Werner
Rename Kconfig options for secmon and spintable to be prefixed with ARM64_ instead of ARCH_, which seems to be the standard throughout the rest of coreboot (e.g. ARM_LPAE or X86_BOOTBLOCK_SIMPLE). I think this provides a clearer separation between generic options that are selected by the architecture (e.g. a hypothetical ARCH_HAS_FEATURE_X similar to some of the MAINBOARD_HAS_... we have) and options that only make sense in the context of a single architecture. Change-Id: I38c2efab833f252adbb7b61ef0af60ab25b768b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/270783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10242 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-19arm64: Reorganize payload entry code and related KconfigsJulius Werner
Remove the secmon Kconfig guard from Makefiles that add to the secmon class since they are redundant (the class is simply not used when compiling without secmon) to improve readability/ease-of-use. [pg: taken out of the patch linked below] Change-Id: I2f0ad8a923ca32fcade748ac8ee50c23cf9bafb9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/270783 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10241 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-15rk3288: remove unused structs and declarationsAaron Durbin
The struct rockchip_spi_media type is no longer used; nor is initialize_rockchip_spi_cbfs_media(). Remove them. Change-Id: I2c24be249e0cd89e2dd328e05cdd24a178fe37e8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10214 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-13baytrail: broadwell: correct refcode loadingAaron Durbin
I messed up the conditionals on loading the reference code. The bug used || instead of && causing 2 reference codes to be loaded. Change-Id: I29a046bf0e8dc29a9efdb636ebfd04e11eb73f82 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10185 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-05-11nvidia/tegra132: we write tables in ramstagePatrick Georgi
So that's more precise than "anything non-pre-ram". Change-Id: I21db536a5ea704c4b087f57d0b761dd3fdf43e3e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10128 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-05-07imgtec/pistachio: Add comment on the unusual memory layoutPatrick Georgi
To avoid having to dig up the constraints again, document the memory layout right in memlayout.ld. Change-Id: I298cc880ae462f5b197ab2f64beb2f0e0d9f5a7d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10039 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-053rdparty: move to 3rdparty/blobsPatrick Georgi
There's now room for other repositories under 3rdparty. Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10109 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-053rdparty: Move to blobsPatrick Georgi
To move 3rdparty to 3rdparty/blobs (ie. below itself from git's broken perspective), we need to work around it - since some git implementations don't like the direct approach. Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-05-05nvidia/tegra132: Fix vboot2 memory layoutAaron Durbin
bootblock et al were listed twice, which shouldn't happen. Change-Id: I3e6077d70e064ebe74bd4e5e3156f87d548c2fcb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10097 Tested-by: build bot (Jenkins)
2015-05-05vboot: remove uses of vboot2_verify_firmware()Aaron Durbin
The vboot mechanism will be implemented within the program loader subsystem to make it transparent to mainboards and chipsets. Change-Id: Icd0bdcba06cdc30591f9b25068b3fa3a112e58fb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10094 Tested-by: build bot (Jenkins)
2015-05-04intel/fsp_baytrail: Fix SPI debuggingDavid Imhoff
Fix compiler error's due to type mismatch. This is broken since commit bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer). TEST=Build with CONFIG_DEBUG_SPI_FLASH=y and booted on Minnowboard Max Change-Id: Id3d448e219716135897f381a73d416ff34036118 Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl> Reviewed-on: http://review.coreboot.org/10075 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-05-01intel: Correct MMIO related ACPI table settingsDave Frodin
Several of the intel platforms define the region reserved for PCI memory resources in a location where it overlaps with the MMIO (MCFG) region. Using the memory map from mohon_peak as an example: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000a0000-00000000000fffff: RESERVED 3. 0000000000100000-000000007fbcffff: RAM 4. 000000007fbd0000-000000007fbfffff: CONFIGURATION TABLES 5. 000000007fc00000-000000007fdfffff: RESERVED 6. 00000000e0000000-00000000efffffff: RESERVED 7. 00000000fee00000-00000000fee00fff: RESERVED 8. 0000000100000000-000000017fffffff: RAM The ACPI table describing the space set aside for PCI memory (not to be confused with the MMIO config space) is defined as the region from BMBOUND (the top of DRAM below 4GB) to a hardcoded value of 0xfebfffff. That region would overlap the MMIO region at 0xe0000000-0xefffffff. For rangeley the upper bound of the PCI memory space should be set to 0xe0000000 - 1. The MCFG regions for several of the affected chipsets are: rangeley 0xe0000000-0xefffffff baytrail 0xe0000000-0xefffffff haswell 0xf0000000-0xf3ffffff sandybridge 0xf8000000-0xfbffffff TEST = intel/mohonpeak and intel/bayleybay. Change-Id: Ic188a4f575494f04930dea4d0aaaeaad95df9f90 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/9972 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-20 00:59:33 +0000