Age | Commit message (Collapse) | Author |
|
Move the EHCI errata from QuarkFSP into coreboot.
TEST=Build and run on Galileo Gen2
Change-Id: I424ffd81643fbba9c820b5a8a6809b9412965f8d
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14940
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Rename usb.c to ehci.c since it contains EHCI specific content.
TEST=Build and run on Galileo Gen2
Change-Id: Ifdb7cd937b1dffda1959b76e1c911ffd93f53cb6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14939
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Switch from using uart_dev to uart_bdf to better describe the value
in use.
TEST=Build and run on Galileo Gen2
Change-Id: If5066b93ea8ccce4a5b89ee3984c7413d5358e71
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14938
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
On apollolake the boot media layout is different in that the
traditional "BIOS" region contains another data structure with
the boot assets such as CSE firmware, PMC microcode,
CPU microcode, and boot firmware to name a few. There's also a
sort of recovery mechanism where there is a second data structure
with similar contents halfway through the "BIOS" region. This
second structure is referred as the logical boot partition 2 (LBP2),
and it's optionally employed.
Add support for writing the LBP2 to a specified FMAP region to
accommodate platforms which require it.
Change-Id: I1959a790f763b409238dea6b62408b42122e590e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14924
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Add a handler for soc/intel/apollolake to return the ACPI path for
GPIOs. There are 4 GPIO "communities" on apollolake that each have a
different ACPI device so return the appropriate name for the different
communities.
Change-Id: I596c178b7813ac6aaeb4f2685bb916f5b78e049b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14859
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a handler for the Intel Skylake SOC to return the ACPI path for
GPIOs. Since all GPIOs are handled by the same controller they all
have the same ACPI path and this is a simple handler that just returns
a pointer to the GPIO device that is defined in the DSDT.
Change-Id: I24ff3a6f2479d9e7eeace65d49e2f6c2e070f3e9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14843
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a global ACPI device name handler for the Skylake SOC that will
translate skylake device paths into an ACPI path that matches the
device objects delcared in the DSDT at soc/intel/skylake/acpi/*.
The skylake implementation uses a global acpi_name handler for the
SOC and it is not necessary to add a function to every device.
This function is used by device drivers calling acpi_device_name()
and acpi_device_path() to generate ACPI AML in the SSDT.
Change-Id: I31cecf7905a51224e7bfc40c6c4ad2487f039097
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14841
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Since FSP-M is run in CAR (as opposed to XIP), its default link
address may need to be changed. Since cbfstool can relocate FSP
blobs, take advantage of that feature.
Change-Id: I4353fe09d785c090843ce25ff4e654d45c64c381
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14866
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Idcfaba08e4705c6219a46dd615ae8b456a8ab5b4
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14865
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Follow the convention used on all other platforms and explicitly call
console_init() before any printk(). This call was most likely ommitted
by accident during rebase.
Also remove the "Starting romstage..." message, as console_init() will
print a standardized message. I don't have details on how this message
originally appeared.
Change-Id: Id91f0fc15ecbd3635d67a261907f4c6af9a499ab
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14864
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have a timestamp from before cache-as-ram setup saved in the MMX
registers. Recover that timestamp, and use it as the base timestamp
rather than letting lib/bootblock.c use a late timestamp.
This allows more accurate profiling of the boot flow, since CAR setup
time is no longer excluded from the timing information.
Change-Id: I055092c600438c5260ab67509434a38f1eb77fe4
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14863
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The timer emulation works by deriving a frequency based off the
Common Timer Copy with a frequency of 19.2MHz.
The desired frequency = (19.2MHz * multiplier) >> 32;
With that knowledge update the code to let the compiler perform
the necessary math based on target frequency.
Change-Id: I716c7980f0456a7c6072bbaaddd6b7fcd8cd5b37
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14889
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The print of size_t can pass upstream jenkins, but fails with CROS_SDK
enviornment, "%z" fits for size_t anyway.
Change-Id: Ic8dbab240463f2e484b73d55e21985fae2b0d9b7
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14835
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
If booting from sdcard/usb, kernel can't recognize the
/dev/mmcblk0.
Before kernel find it's root cause, we add this workaround
patch to enable clk for emmc.
BRANCH=none
BUG=chrome-os-partner:52873
TEST=boot from sdcard and check the /dev/mmcblk0 exists
Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85
Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341632
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14856
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz,
that is GPLL(594MHz) divided by 3.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard
TEST=LoadKernel faster, more than twice as I measured manually.
Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2
Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/339152
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14855
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The code needs to be able to set drive strength for the pins used for
SDMMC0 interface. This patch adds the definitions for the two
registers, as per page 378 of the RK3399 TRM Part 1.
Instead of calculation of the reserved range size just use known
offsets of the registers included in the structure.
BRANCH=none
BUG=chrome-os-partner:53257
TEST=with the upcoming driver change it is possible to boot chrome OS
on Gru from various micro SD cards which were failing before.
Change-Id: I63bf37432ec7f3bdf7e9c6a79d51c31de122dae9
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: c6d6dc5e5e6cc81c173603d4eb21ae803a47815d
Original-Change-Id: Ibe7584e77b446435ab1264dcf8fc8bfe0c50438e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/344490
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14852
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
improve rk3399 sdram drvier, so we can support DDR3,
and check the cs training result, so we make sdram
work more stable.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot from kevin, do memtester in kernel and pass
Change-Id: I508bf26fb8163bab2d725a91ead929df585e04a7
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 4d83a87c459167145b7260f9af5c0380caddc056
Original-Change-Id: Id385f1343804a829b6589f89f4cfbb6565d41417
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342664
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14849
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
This patch configures clock for tsadc and then
makes it in automatic mode to generate TSHUT when
CPU temperature is higer than 120 degree Celsius.
BRANCH=none
BUG=chrome-os-partner:52382,chrome-os-partner:51537
TEST=Set a lower tshut threshold(45C), run coreboot and check
that coreboot reboot again and again.
Change-Id: I0b070a059d2941f12d31fc3002e78ea083e70b13
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 05107bd6a3430e31db216c247ff0213e12373390
Original-Change-Id: Iffe54d3b09080d0f1ff31e8b3020d69510f07c95
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342797
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/14848
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The tsadc of rk3288 and rk3399 are similar but not enough
to share the same common driver, and we also decide to add a
polarity setting for mainboards on rk3399 tsadc header.
So we'd better split the tsadc header for each SoC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build veyron_jerry
Change-Id: I41f08965e6d7ce16da1754d4d2512c826cf8aff5
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: b36ee54c4146623bcacd83fe7d55a4fc78bae792
Original-Change-Id: I629599f9e30d863cabf764e1372c38f0f39d5480
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342796
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14847
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Let vop aclk sources from CPLL, and vop dclk from NPLL.
The dclk freq is decided by the edid mode pixel_clock which
may require high accuracy like 252750KHz. The pll_para_config()
can calculate the dividers for PLL to output desired clock.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=check display with the other patches
Change-Id: I12cf27d3d1177a8b1c4cfbd7c0be10204e3d3142
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 0f019b055fffebe9ea3928aae1e25b0ad4feef81
Original-Change-Id: Icef58f87041905961772b69c6b8170d5a866a531
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342335
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14846
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Enable emulation for ACPI PM1 timer. This is needed by FSP-M
MemoryInit.
Change-Id: I7a441f5f1673e6430697615ae7251da948e77548
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14821
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie528b0ee3d447dcb819ccb7c0f832885da0f4257
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14820
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
As of now FSP-M can not be relocated and it can not be instructed
to use a specific resource for temporary memory. As result coreboot
is forced to use CAR layout dictated by default FSP-M configuration.
Change CAR size to 1MiB, link romstage at such CAR address so it
doesn't overlap with FSP-M's default heap/stack.
Change-Id: I56f78f043099dc835e294dbc081d7506bfad280d
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14804
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently, StackBase field doesn't work and changing it from default
value leads to crash.
Change-Id: Id3f3ea9a834d0c04a8381938535109d6a729cca2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14803
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2d16336513bcd5a0544a6b68b609e40dd7c141fb
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14807
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add helper function that fills OpRegion structure based on
VBT file content and some reasonable defaults.
Change-Id: I9aa8862878cc016a9a684c844ceab390734f3e84
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14806
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I8d3d47ca2fc1fc4c10e61c04b941b6378b9c0f80
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14815
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the I2C driver.
TEST=Build and run on Galileo Gen2
Change-Id: I53fdac93667a8ffb2c2c8f394334de2dece63d66
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14828
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change Memroy to Memory in comment.
TEST=None
Change-Id: Ic57fcf962be6a302dcd7b52b9256a182577e734b
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14881
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Set the base address and enable the GPIO and legacy GPIO controllers.
Call the mainboard routine to initialize the GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I06aed5903d6655d2a0948fb544cf9e0db68faa26
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14827
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6ea9b9d2353c0d767c837e6d629b45f23b306f6e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Add register access routines for the GPIO and legacy GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I0c023428f4784de9e025279480554b8ed134afca
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14825
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add LPC_DEV and LPC_FUNC symbols
TEST=Build and run on Galileo Gen2
Change-Id: I8485e2671af439f766228d4eaf9677c2ff8ff3f6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Replace # define with #define
Align the right hand column to prepare for further expansion
TEST=Build and run on Galileo Gen2
Change-Id: Ie4d9fb56d52d7291be5523d31c1d3aa51f94dcd6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add Ioh.h from EDK-II to enable easy comparisons between EDK-II and
coreboot implementations.
TEST=Build and run on Galileo Gen2
Change-Id: I9320101a4a2c16ed18f682f3d04623c54afb52fd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14824
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
|
|
Instead of having the mainboards duplicate logic surrounding
LPDDR4 initialization provide helpers to do the heavy lifting.
It also handles the quirks of the FSP configuration which allows
the mainboard porting to focus on the schematic/design.
Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14790
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order for apollolake mainboards to utilize the common GPIO API
it actually needs to be implemented.
Change-Id: I41de8d5d9f3c39e7e796eae73b01cb29e9c01347
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14797
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of having the mainboards duplicate the same boilerplate
code utilize the common FADT infrastructure to reduce duplication.
Change-Id: If824619fd619433974e588050a933d2c19b97ec8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14779
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The ACPI BAR (BAR2 - offset 0x20) is not PCI compliant. That means
that probing may not work. In that case, a resource still needs to be
created for the BAR.
BONUS: We now avoid the need to declare the MMIO resources as fixed.
Change-Id: I52fd2d2718ac8013067aaa450c5eb31e00738ab9
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14634
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to
be done in platform code.
Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14764
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The old code only checked for an RW_MRC_CACHE region when
CONFIG_CHROMEOS was selected. This assumption is not necessarily true,
as one can have FMAP without a CHROMEOS build. As a result, always
search FMAP first before falling back on CBFS for locating the MRC
cache region.
The old logic where CHROMEOS builds would fail when RW_MRC_CACHE was
not found is preserved, such that behavior does not change.
Change-Id: I3596ef3235eff661af055968ea641f3e9671cdcd
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14757
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When SOC_UART_DEBUG was not set, the boot would hang somwhere in
ramstage, as evidenced by POST codes reported from the EC. This was
traced to the .set_resources and .enable_resources members of the UART
PCI driver being set to NOOP.
Although the exact mechanism of failure is not known, this change
eliminates the hang.
Change-Id: Ic2f3d56a964ec890ebfa1e1a7770f1ae2eb22281
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14771
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I58b2c3c52444d9a755d05529992507086a423f1a
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14620
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Remove the phrase "which accompanies this distribution" from the license.
Re-format the license to fit in 80 columns.
TEST=Build and run on Galileo Gen2
Change-Id: I8d893cf1270b95b27eab7142b276ebfce24ec2ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14774
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The origin of UART config is less interesting than having the config be
correct.
Change-Id: I834e3a54105a8fd7d62f388e4a9ad0992ecec807
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14767
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
The code needs to know what kind of part the SoC is, but the question
was weirdly phrased and also exposed to the user (instead of being a
silent "select" to do in a board).
Change-Id: I0344c528d86ac047fc49ccff9e149865bbd4b481
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14766
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=none
BRANCH=none
TEST=compiled
Change-Id: I125585e33783a39194bb12b2dd746bb968da5fee
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e6f986e57bc1ce341e1b0ae6a419d4bbe0f169aa
Original-Change-Id: Ife4cde2318e007a76c978973c13bbce583d082a8
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/343556
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14760
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rename Ipq806xLcc* to IpqLcc*.
Change-Id: Ib235c1cdb36bb007a673133f59026863990e1a6f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Increase the HEAP size to handle large vpd data.
BUG=chrome-os-partner:50499
TEST=board with vpd data no longer showing out of memory error
BRANCH=none
Change-Id: Ia0793a626c3500c3469c608bae987ae15a176016
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12090652d2b70ec553a4f59fe9917a1b3b204579
Original-Change-Id: I1ead4c104b27cf678c68132b0ab08e32c15790b2
Original-Signed-off-by: Kan Yan <kyan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340267
Original-Commit-Ready: Nicolas Boichat <drinkcat@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14682
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Clear the crash dump cookie set by SBL to indicate that
it is a normal reset.
Inform DDR image of the entrypoint for SDI image to be
preserved in OCIMEM which will be needed during watchdog
resets.
BUG=chrome-os-partner:49249
TEST=DDR image is able to fetch the entry point address
BRANCH=none
Change-Id: I3e6e4a108585bb257e3ad02956c420acbcb2554e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bd726256a5ae89672810b57e1d2a7a9287f60627
Original-Change-Id: Id6e09516209f47c3ea8fa3d8d90440789b395660
Original-Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333321
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14679
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|