summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2016-09-28soc/intel/apollolake: Add pmc_ipc device supportLijian Zhao
A dedicated pmc_ipc DSDT entry is required for pmc_ipc kernel driver. The ACPI mode entry includes resources for PMC_IPC1, SRAM, ACPI IO and Punit Mailbox. BRANCH=None BUG=chrome-os-partner:57364 TEST=Boot up into OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I3f60999ab90962c4ea0a444812e4a7dcce1da5b6 Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16649 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-28soc/intel/apollolake: Use fixed resource for SRAM and IPC1Lijian Zhao
Intel telemetry support will require PMC IPC1 and SRAM devices to be operated in ACPI mode. Then using fixed resources on BAR0, BAR1 and BAR2 (PMC only) for those two devices will help the resource assignment in DSDT stage. BUG=chrome-os-partner:57364 BRANCH=None TEST=Boot up into Chrome OS successfully and check with dmesg to see the driver has been loaded successfully without errors. Change-Id: I8f0983a90728b9148a124ae3443ec29cd7b344ce Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/16648 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-26soc/intel/apollolake: provide power button ACPI deviceAaron Durbin
Instead of having each mainboard provide the power button, uncondtionally provide the power button ACPI device on behalf of each mainboard. BUG=chrome-os-partner:56677 Change-Id: I94c9e0353c8d829136f0d52a356286c6bedcddd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16731 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-22soc/intel/apollolake: Initialize processor count in GNVSDuncan Laurie
Initialize the PCNT variable in GNVS so it is available to ACPI code that expects to know the number of CPUs. Change-Id: I7a6e003ac94218061bf98e8883ed2c62d856af8d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-21soc/apollolake: Correct the comment section in gpio.aslShaunak Saha
This patch corrects the comment section in gpio.asl for GPE method. Change-Id: I45771a295ee1eda00b9699f42cddd120223ff7bf Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16647 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21soc/intel/apollolake: Add function to read and clear GPE statusDuncan Laurie
Implement the generic acpi_get_gpe() function to read and clear the GPE status for a specific GPE. Tested by watching GPE status in a loop while generating interrupts manually from the EC console. BUG=chrome-os-partner:53336 Change-Id: I482ff52051a48441333b573f1cd0fa7f7579a6ab Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16671 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21soc/intel/apollolake: Initialize GPEs in bootblockDuncan Laurie
Initialize the GPEs from mainboard config in bootblock, so they can be used in verstage to query latched interrupt status. I still left it called in ramstage just to be sure that the configuration was not overwritten in FSP stages. Tested by reading and reporting GPE status in a loop in verstage and manually triggering an interrupt on EC console. BUG=chrome-os-partner:53336 Change-Id: Iacd0483e4b3229aca602bb5bb40586eedf35a6ea Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16670 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-21Makefiles: update cbfs types from bare numbers to valuesMartin Roth
These values are found in util/cbfstool/cbfs.h. Change-Id: Iea4807b272c0309ac3283e5a3f5e135da6c5eb66 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16646 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20rockchip: spi: Improve SPI read efficiencySimon Glass
The SPI driver is quite slow at reading data. For example, with a 24MHz clock on gru it achieves a read speed of only 13.9Mbps. We can correct this by reading the status registers once, then reading as many bytes as are available before checking the status registers again. It seems likely that a status register read requires synchronizing with the SPI FIFO clock domain, which takes a while. BUG=chrome-os-partner:56556 BRANCH=none TEST=run on gru and see the speed increase from 13.920 Mbps to 24.712 Mbps Change-Id: I24aed0c9c6c5445634c4e056922afaee4e9a7b33 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 49c2fc20d7d7d703763e9b0a6f68313a349a84b9 Original-Change-Id: I42745f01f0fe069f6ae26d866004d36bb257e6b2 Original-Signed-off-by: Simon Glass <sjg@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/376945 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/16582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20gru: Add watchdog reset supportJulius Werner
This patch adds support to reboot the whole board after a hardware watchdog reset, to avoid the usual TPM issues. Work 100% equivalent to Veyron. From my tests it looks like both SRAM and PMUSRAM get preserved across warm reboots. I'm putting the WATCHDOG_TOMBSTONE into PMUSRAM since that makes it easier to deal with in coreboot (PMUSRAM is currently not mapped as cached, so we don't need to worry about flushing the results back before reboot). BRANCH=None BUG=chrome-os-partner:56600 TEST='stop daisydog; cat > /dev/watchdog', press CTRL+D, wait 30 seconds. Confirm that system reboots correctly without entering recovery and we get a HW watchdog event in the eventlog. Change-Id: I317266df40bbb221910017d1a6bdec6a1660a511 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 3b8f3d064ad56d181191c1e1c98a73196cb8d098 Original-Change-Id: I17c5a801bef200d7592a315a955234bca11cf7a3 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/375562 Original-Commit-Queue: Douglas Anderson <dianders@chromium.org> Reviewed-on: https://review.coreboot.org/16578 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19Revert "soc/intel/apollolake: Initialize GPEs in bootblock"Duncan Laurie
This reverts commit 5e3dad66227bba4be9365ee76d00231bb5577b56.
2016-09-19Revert "soc/intel/apollolake: Add function to read and clear GPE status"Duncan Laurie
This reverts commit 3d43a7c111d00be246160a04023fe438ae0cac57.
2016-09-19soc/intel/apollolake: Add function to read and clear GPE statusDuncan Laurie
Implement the generic acpi_get_gpe() function to read and clear the GPE status for a specific GPE. Tested by watching GPE status in a loop while generating interrupts manually from the EC console. BUG=chrome-os-partner:53336 Change-Id: Id885e98d48c2133a868da19eca3360e2dfb82e84 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Initialize GPEs in bootblockDuncan Laurie
Initialize the GPEs from mainboard config in bootblock, so they can be used in verstage to query latched interrupt status. I still left it called in ramstage just to be sure that the configuration was not overwritten in FSP stages. Tested by reading and reporting GPE status in a loop in verstage and manually triggering an interrupt on EC console. BUG=chrome-os-partner:53336 Change-Id: I1af3e9ac1e5c59b9ebb5c6dd1599309c1f036581 Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
This patch sets some magic number in magic undocumented registers that are rumored to make USB 2.0 signal integrity better on Kevin. I don't see any difference (unfortunately it doesn't solve the problems with long cables on my board), but I guess it doesn't hurt either way. BRANCH=None BUG=chrome-os-partner:56108,chrome-os-partner:54788 TEST=Booted Kevin with USB connected through Servo. Seems to have roughly the same failure rate as before. Change-Id: If31fb49f1ed7218b50f24e251e54c9400db72720 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0c5c8f0f80ea1ebb042bcb91506a6100833e7e84 Original-Change-Id: Ifbd47bf6adb63a2ca5371c0b05c5ec27a0fe3195 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/370900 Original-Reviewed-by: Guenter Roeck <groeck@chromium.org> Original-Reviewed-by: David Schneider <dnschneid@chromium.org> Reviewed-on: https://review.coreboot.org/16265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-19soc/intel/skylake: Add FSP 2.0 support in ramstageNaresh G Solanki
Add FSP 2.0 support in ramstage. Populate required Fsp Silicon Init params and configure mainboard specific GPIOs. Define function fsp_soc_get_igd_bar needed by fsp2.0 driver for pre OS screens. Change-Id: Ib38ca7547b5d5ec2b268698b8886d5caa28d6497 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16592 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-19soc/intel/apollolake: Configure ACPI name for PCIeVaibhav Shankar
This implements acpi name for PCIe root port. BUG=chrome-os-partner:56483 Change-Id: Ifec1529c477f554d36f3932b66f62eea782fdcaa Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16621 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: always enable BOOTBLOCK_CONSOLEAaron Durbin
In order to ensure bootblock console output shows up in cbmem console unconditionally select BOOTBLOCK_CONSOLE. BUG=chrome-os-partner:57513 Change-Id: Ie560dd0e7102c79f6db186a11d6f934505bac116 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16622 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: enable postcar consoleAaron Durbin
Unconditionally turn on postcar console for apollolake. BUG=chrome-os-partner:57513 Change-Id: I3d956be4a5834a4721767d34216eebeabef3e315 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16620 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-19soc/intel/apollolake: cache boot media post romstageAaron Durbin
When the boot media is memory mapped mark it as cacheable after romstage. Otherwise the boot media is uncacheable and all loads from it take longer. Loading FSP-S alone in ramstage went down to 17.5ms from 54ms. BUG=chrome-os-partner:56656 Change-Id: I6703334ba8fe98aca26ba1c995d6d3abb0ddef33 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16613 Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-15soc/apollolake: Set up GPIO_TIER1_SCI_EN properlyShaunak Saha
Currently we are setting the gpio_tier1_sci in smihandler before going to S3. But this won't work for S0iX as it happens from Linux kernel and SMI handler is not involved in that flow. We need to set this bit i.e. bit 15 in ACPI gpe0a register at 0x430h. The Linux kernel before going to sleep checks what values are passed through ASL as wake events (through _PRW), keeps those enabled only and clears other bits in gpe0 enable registers. So we need to inform the kernel to keep gpio_tier_sci also set as these are needed for any wake event. This patch adds ASL code for sleep button device with HID id PNP0C0E. We are adding _PRW method for sleep button device with this patch. BUG=chrome-os-partner:56483 TEST=System resumes from S3 on lidopen, powerbutton and USB wake. Also from S0iX system is resuming for WIFI wake. Change-Id: Ie8517cad9cd37c25788c22250894d4f9db344ff9 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/16564 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-09-15driver/intel/fsp20: move lb_framebuffer functionNaresh G Solanki
move lb_framebuffer function in soc/intel/apollolake to driver/intel/fsp20 so that fsp 2.0 bases soc's can use common lb_framebuffer function. Change-Id: If11bc7faa378a39cf7d4487f9095465a4df84853 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16549 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-15soc/intel/skylake: Add FSP 2.0 support in romstageBarnali Sarkar
Populate SoC related Memory initialization params. Post memory init, set DISB, setup stack and MTRRs using the postcar funtions provided in postcar_loader.c. TEST=Build and boot kunimitsu, dram initialization done. ramstage is loaded. Change-Id: I8d943e29b6e118986189166d92c7891ab6642193 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/16315 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14lpss_i2c: Add Kconfig option to enable debugDuncan Laurie
It is very useful to have the ability to see I2C transactions performed by the host firmware. This patch adds a simple Kconfig option that will enable debug output. Change-Id: I55f1ff273290e2f4fbfaea56091b2df3fc49fe61 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16590 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14lpss_i2c: Change handling of controller enable/disableDuncan Laurie
This change modifies the lpss_i2c driver to behave more like the Linux kernel driver. In particular the controller is only enabled when processing a transaction, and is disabled after. This means that errors in one transaction will not affect later transactions. Also when disabling the controller the code is supposed to wait on the enable bit in the "enable status" register and not in the enable control register. In order to get access to this register the reg map was expanded to include all registers. This was tested with the cr50 TPM driver to ensure that if a transaction does fail that it can be successfully retried instead of the bus being unusable. Change-Id: I43a546d54996ba0f08550a801927b8f7a6690cda Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16589 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-14soc/intel/apollolake: Update PL1 value in RAPL MMIO registerSumeet Pawnikar
Due to an incorrect value set for the power limit PL1, the system is not able to leverage full TDP capacity. FSP code sets the PL1 value as 6W in RAPL MMIO register based on fused soc tdp value. This RAPL MMIO register is a physically separate instance from RAPL MSR register. This patch sets PL1 value to 15W in RAPL MMIO register. BUG=chrome-os-partner:56524 TEST=Built, booted on reef and verifed the package power with heavy workload. Change-Id: Ib344247cd8d98ccce7c403e778cd87c13f168ce0 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/16595 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-14soc/intel/apollolake: Add PM methods to power gate PCIeVaibhav Shankar
This implements GNVS variable to store the address of PERST_0, _ON/_OFF methods to power gate PCIe during S0ix entry, and PERST_0 assertion/de-assertion methods. BUG=chrome-os-partner:55877 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should resume with PCIE and wifi functional. Change-Id: I9f63ca0b8a6565b6d21deaa6d3dfa34678714c19 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16351 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-14soc/intel/apollolake: initialize GNVS structure to 0Aaron Durbin
The code was not previously initializing the GNVS structure to all 0's in the ACPI write tables path. Fix this and also rearrange the ordering of updating the fields to only handle the chip_info specific bits till last such that most of the structure is filled in prior to bailing out in the case of a bad devicetree. Change-Id: I7bdb305c6b87dac96af35b0c3b7524a17ce53962 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/16597 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-13soc/marvell/mvmap2315: Add DDR driverHakim Giydan
This driver is only a prototype driver, real driver will be integrated at a later time. Testing: booted successfully. Change-Id: I372764962e96e5c9c827d524bc369978c5c1fda8 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16554 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add MCU driverHakim Giydan
Testing: booted successfully. Change-Id: I003f6929b00476d46be931773cd35418fe6622a6 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15529 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add WDT driverHakim Giydan
Testing: booted successfully. Change-Id: Ie9c9297f321c838f86e5536aab29f67a0eeb053d Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15519 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add NVM driverHakim Giydan
This driver uses BootROM callback to read and write to the nvm using I2C. Testing: booted successfully. Change-Id: I8639af3e004f6631d7e596507c106159835f979f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16161 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add A2BUS driverHakim Giydan
A2BUS is a custom fabric. Testing: booted successfully. Change-Id: If6e61f5aa30217eb601ac460d9306166b8433569 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15523 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add PMIC driverHakim Giydan
Testing: booted successfully. Change-Id: I168206585f403d2259efe424e563982be661df0b Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16149 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add APMU driverHakim Giydan
APMU is the AP power management unit. It is a separate processor that handles enabling individual power rails. This driver handles sending and receiving commands from/to APMU. Testing: booted successfully. Change-Id: I5ae07849f8432bece8a0ae9066a3f786e6e8d2fe Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15518 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add load_validate driverHakim Giydan
Load_validate: it loads and validates images from flash using hash values stored in the BDB. Testing: booted successfully. Change-Id: I0b00e8c60ed76622d03cb232d5c4273b4077aae7 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/16148 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add flash driverHakim Giydan
Testing: booted successfully. Change-Id: Iaeff9f01dbfad7f313aa237e8c71c36c4ed1e06f Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15509 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell/mvmap2315: Add gpio driverHakim Giydan
Testing: booted successfully. Change-Id: I89dee1bbf8b68460897f64bf673b328533e70cd4 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15508 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13soc/marvell: Add stub implementation of MVMAP2315 SOCHakim Giydan
Most things still need to be filled in, but this will allow us to build boards which use this SOC. Nvidia Tegra210 SOC and Rochchip Rk3399 SOC has been used as templates to create this directory. Change-Id: I8cc3e99df915bb289a2f3539db103cd6be90a0b2 Signed-off-by: Hakim Giydan <hgiydan@marvell.com> Reviewed-on: https://review.coreboot.org/15506 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13fsp_broadwell_de: Add Kconfig switch for SERIRQ operation modeWerner Zeh
The serial IRQ (SERIRQ) used by the LPC interface can operate either in continuous or in quiet mode. Add a Kconfig switch to select the desired mode. This switch can now be used on mainboard level to enable the needed mode per mainboard. Change-Id: Ibe246b88164a622f9c71ebe7bab752a083a49a62 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-12siemens/mc_bdx1: Enable decoding for COM 3 & COM 4 on LPCWerner Zeh
Since this mainboard provides 4 COM ports on LPC, enable decoding of the corresponding addresses using the generic LPC decode registers. Change-Id: I0e93d40dca01d55f3567a18c7ec02269e3bec466 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-12fsp_broadwell_de: Correct access to SIRQ_CNTL registerWerner Zeh
The serial IRQ configuration register is only 8 bit wide so switch the PCI access from 16 bits to 8 bits. Change-Id: Ia9fbc02251e00b31440bf103e2afc2ff285b7f2e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16534 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09soc/intel/apollolake: Add functions to calculate GPIO addressVaibhav Shankar
Provide iosf and GPIO functions for GPIO address calculation. BUG=chrome-os-partner:55877 Change-Id: I6eaa1fcecf5970b365e3418541c75b9866959f7e Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/16349 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-08fsp_broadwell_de: Adjust printed address in SPI debug messagesWerner Zeh
For an unknown reason the printed address in the SPI debug messages is modified before it is printed by subtracting the constant 0xf020 from the passed in address. What I suppose this debug code should do is to print the used register address within the SPI controller while any parts of this address that belongs to the SPI base address should be omitted. To fix that remove the subtraction of 0xf020 and adjust the address mask to 0x3ff so that only the offset to the registers inside the SPI controller will be visible in the debug messages. In addition switch to uint8_t and friends over u8 to sync up with used types in this file. Change-Id: I93ba7119873115c7abc80a214cc30363a6930b3b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16500 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-07commonlib: move DIV_ROUND macros from nvidia/tegraArthur Heymans
DIV_ROUND_CLOSEST and DIV_ROUND_UP are useful macros for other architectures. This patch moves them from soc/nvidia/tegra/types.h to commonlib/include/commonlib/helpers.h . Change-Id: I54521d9b197934cef8e352f9a5c4823015d85f01 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16415 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-07soc/apollolake: Enable/disable Audio clk and power gate in devicetree.cbVenkateswarlu Vinjamuri
BUG=chrome-os-partner:56034 Change-Id: Id88d262b32dea468536575117fc34d52076a3096 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/16423 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06fsp_baytrail: Refactor code for SPI debug messagesWerner Zeh
Use the config switch CONFIG_DEBUG_SPI_FLASH on compiler level rather then on preprocessor level to ensure that the code is compiled even if the switch is not selected. In addition the following two changes are introduced: 1. Prepend the debug messages with 'SPI:' to make the output more meaningful. 2. Change the address mask from 0xffff to 0x3ff and remove the subtraction of the constant value 0xf020 in order to print only the register offset within the SPI controller and avoid the visibility of any fragments from SPI base address. 3. Switch to uint8_t and friends instead of u8 to sync up with other code in the same file. Change-Id: Iaf46f29a775039007a402fe862839df06a4cbfaa Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/16499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-09-06google/reef: Enable 20K pull ups for LPC CLKRUN and LAD0:3 linesShamile Khan
The pull up for CLKRUN is required to resolve keyboard slowness and malfunctioning observed on some reef systems. The CLKRUN signal was probed and found to be floating when the pull up was not enabled. Also Added pull ups for the LPC Multiplexed command, address and data lines LAD0:3 because the LPC Interface specification requires them. BUG=chrome-os-partner:55586 BRANCH=none TEST=When a key is pressed, the character is immediately visible on the screen. Also the interrupt count for i8042 increments immediately in /proc/interrupts. Change-Id: I16df1a0301a3994c926a609f61291761219f9e01 Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/16426 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-09-04Makefile.inc: Use $(MAINBOARDDIR)Iru Cai
Commit 93ef3ff makes the following only print the part number when the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so use it instead of $(MAINBOARD_DIR). build_complete:: coreboot printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \ $(CONFIG_MAINBOARD_PART_NUMBER) Change-Id: I729a583182937db7a926eb75aa28dfb53360046c Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/16410 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-04lpss_i2c: Increase default timeout to 4msDuncan Laurie
Increase the default timeout in the LPSS I2C driver to 4ms from 2ms. During testing with some slower devices I found that the existing timeout could be too short leading to transaction failures. Change-Id: Ied86c7a0aa26d55b31f447c5938803c194d0045e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/16392 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 07:14:22 +0000