summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-12-10mb/intel/icelake_rvp: Fill Icelake U and Y RVP devicetree parametersAamir Bohra
This implementation configures below parameters: 1. Enable SaGv, isclk. 2. Set Pcie rootport enable, Clock source usage and clkreq. 3. Configure SATA and LPSS controllers parameters. 4. Enable CNVI controller, configure Wifi end device under PCIE RP1. 5. Add TPM device support under GSPI1. Change-Id: I585e82799eea0bad19ad2c94d6b4b3024f930ed4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/30015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-12-10soc/intel/cannonlake: Fix GPIO reportingDuncan Laurie
The kernel GPIO driver only expects some GPIO communities to be exported in the _CRS and it will not work correctly if the other communities are exported. CNL-LP: GPIO communities 0, 1, 4 CNL-H: GPIO communities 0, 1, 3, 4 Additionally one of the pin offset values was incorrect in GPIO community 1 for CNL-LP. This doesn't have any specific failure mode but it was found when auditing the GPIO code. Details of the kernel expected map can be found in the linux kernel at drivers/pinctrl/intel/pinctrl-cannonlake.c BUG=b:120686247 TEST=check /sys/kernel/debug/pinctrl/INT34BB:00/pins to ensure that pins >= 198 are not reading all zeros for the pin config registers. Change-Id: Ie1a2f3b9f9f4b24a9fc57e468dee50e99753912f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07soc/intel/apollolake: Print ME version on exit of BS_DEV_INIT stageKarthikeyan Ramasubramanian
Recently there has been a change to print ME version. But the stage at which the version is printed causes the HECI device to remain in D0 state. This in turn prevents the SoC from entering S0ix state. This change moves printing ME version a little earlier so that the HECI device is put into D0i3 state by FSP and the SoC can enter S0ix state successfully. BRANCH=octopus BUG=b:120571529 TEST=Ensure that the ME version gets printed in BIOS logs. Ensure that the device boots to ChromeOS. Ensure that the device enters S0ix successfully(using suspend_stress_test -c 25). Change-Id: I85bc45003a040c8347f929457792d78a9a077c6c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/30074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-07riscv: fix non-SMP supportPhilipp Hug
Use CONFIG_CPU_MAX which defaults to 1 instead of CONFIG_RISCV_HART_NUM. The default value of CONFIG_RISCV_HART_NUM was 0 and cause a jump to address 0. Add a die() call to fail gracefully. Change-Id: I4e3aa09b787ae0f26a4aae375f4e5fcd745a0a1e Signed-off-by: Philipp Hug <philipp@hug.cx> Reviewed-on: https://review.coreboot.org/c/29993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Xiang Wang <wxjstz@126.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-12-07soc/intel/cannonlake: Fix I2C clock inputDuncan Laurie
The input clock for the I2C controllers was set at 133MHz but should really be 216MHz according to the kernel: https://patchwork.kernel.org/patch/10408729/ "Intel Cannon Lake PCH has much higher 216 MHz input clock to LPSS I2C than Sunrisepoint which uses 120 MHz. Preliminary information was that both share the same clock rate but actual silicon implements elevated rate for better support for 3.4 MHz high-speed I2C." This change was tested on a sarien board where an I2C trackpad that was measuring ~700MHz on I2C and is now measuring ~380MHz. Change-Id: I792d1f013da5538a2b8157e2f99b754ca7b6bf70 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30061 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-06soc/intel/apl: Warn if CBFS is outside the memory mapped areaNico Huber
As part of the memory mapped BIOS region is covered by SRAM, check that CBFS always fits the effectively mapped region of flash. This is usually taken care of by reserving the SRAM range in the FMAP (e.g. as BIOS_UNUSABLE), but can be missed. Change-Id: If5a5b553ad4853723bf13349c809c4f6154aa5f2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/30055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-12-06src/soc/intel/braswell/southcluster.c: Config i8254 timerFrans Hendriks
ISA timer is not configured. Add call setup_i8254(). BUG=N/A TEST=Intel CherryHill CRB Change-Id: If45c4975d147f28a456198ea290efba1c8b0464b Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/29416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05sdm845: Add SPI-NOR flash driverMukesh Savaliya
TEST=build & run Change-Id: Ie404faf37617d2ad792310709ca2063f9a372076 Signed-off-by: Mukesh Savaliya <msavaliy@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05soc/amd/stoneyridge: Run romstage mainboard code before AGESAMartin Roth
This is needed so the next patch can set up GPIOs before AGESA runs. BUG=b:120436919 TEST=Verified romstage mainboard code runs before AGESA Change-Id: I76c035e166cd64382b52dff5ae00a6f115cbac9b Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/c/30038 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/amd/stoneyridge: Name IO061 in ASL appropriatelyMarshall Dawson
AMD traditionally claims the resource at I/O port 61 for the onboard PC-AT speaker. In later designs, the speaker may be omitted in favor of routing the SPKR signal to the codec. Some systems implement neither, and for those it is not correct to identify the resource as a speaker. Modify the EISAID reported to the OS depending on the system design. The default is that port 61 is reported as reserved. In order to report a speaker, add #define in mainboard//dsdt.asl. TEST=check /proc/ioports and iasl -d for both ways using a Grunt BUG=b:117818432 Change-Id: I33aafb187f9fea7b38aae43c399292c7521fcfc4 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-05src/(device/lib/soc): Remove unused variablesRichard Spiegel
When building grunt with flags set to detect variables that get a value but then are unused, there are 5 instances that causes error (unused variable). In most cases it's enough to simply remove the variable. Other instances, is better to simply use the variables (one instance it's a return value, on the other instance using the variables makes code more readable). BUG=b:120260448 TEST=Build and boot grunt. Change-Id: I0d00fb6a42db20afb34c76b9445a741a57096ead Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29985 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/sifive/fu540: Add helper function to get tlclk frequencyJonathan Neuschäfer
tlclk is not specific to the UART block in the FU540, so let's calculate its frequency in clock.c. Change-Id: I270920027f1132253e413a1bf9feb4fe279b651a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-05mb/emulation/spike-riscv: Implement mtime_initJonathan Neuschäfer
This patch lets spike boot to "Payload not loaded" again. Because soc/ucb/riscv/ does not represent a real SoC, but is a dummy directory for emulators, and different emulators might have different memory maps, I moved mtime_init to the mainboard-specific directories for Spike and QEMU. Change-Id: I080f7f81df752e25478bd277637bf894bbee4cb2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/28873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-12-05mediatek: Share GPIO external interrupts (EINT) code among similar SoCsChuanjia Liu
Refactor GPIO EINT code which can be reused among similar SoCs. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot; emerge-kukui coreboot Change-Id: Ib01b43cf1aa4082d7d968fe1ef82f75e8cf05b8b Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/29837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-12-05soc/intel/baytrail: Implement POSTCAR stageArthur Heymans
Use common code to tear down CAR. Change-Id: I62a70ae35fe92808f180f2b5f21c5899a96c2c16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/baytrail: Use postcar_frame functions to set up frameArthur Heymans
Change-Id: I77e375a2ff2fbf1be4ded922195b80b49ffa4cc5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29929 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/baytrail: Improve CAR setupArthur Heymans
This patch does the following: - improve the style by removing tabs in front of jmp addresses - Make the code for zeroing variable MTRR more readable (copied from cpu/intel/car) - Fetch PHYSMASK high from cpuid instead of Kconfig Change-Id: I6ba67bb8b049c3f25b856f6ebb1399d275764f54 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05soc/intel/broadwell: Implement postcar stageArthur Heymans
This does the following: - Reuse the cpu/intel/car/non-evict CAR setup and exit. - Use postcar_frame functions to set up the postcar frame Change-Id: I428832a2d7e46ce61a7f9bd498b609feb4518eb0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05smmstore: make smmstore's SMM handler code follow everything elsePatrick Georgi
Instead of SMMSTORE_APM_CNT use APM_CNT_SMMSTORE and define it in cpu/x86/smm.h Change-Id: Iabc0c9662284ed3ac2933001e64524011a5bf420 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30023 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05elog: make elog's SMM handler code follow everything elsePatrick Georgi
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in cpu/x86/smm.h Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30022 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05soc/intel/common/lpc_lib: Add function to disable LPC Clock RunNico Huber
Needed to fix up FSP-S bug on Apollo Lake. Change-Id: If09fee07debb1f0de840b0c0bd7a65d338665f7c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-04soc/intel/common: Limit BIOS region cache to 16MBLijian Zhao
Cache BIOS region can boost boot performance, however it can't be over 16MB, according to processor EDS vol1(Apollolake/Skylake/WhiskeyLake), FLASH+APIC LT will be less than 20MB under 4G. Set the maxiam to 16GB to save numbers of mtrr entries. BUG=b:119267832 TEST=Build and boot up fine on whiskeylake rvp platform. Change-Id: I46a47c8bf66b14fb2fcb7b6b1d30d02886c450a4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add USB device namesDuncan Laurie
Add the ACPI device names for the USB ports to match what is in the DSDT so USB ports can be defined in the SSDT. Change-Id: Ibb323bbd324811fa3178b0cba3d7f0a315169486 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Increase bootblock sizeDuncan Laurie
Increase the bootblock size to 48K to match skylake. With UART enabled we are very near the 32K limit, and with upcoming changes to add USB devices in devicetree for a cannonlake board it is over the current 32K limit. Change-Id: I155cb0a6af1746af6833fa9f35c2ea6fe0bc709f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-12-04soc/intel/cannonlake: Add DPTF ACPI codeDuncan Laurie
Define the constants that DPTF expects from the SOC in order to use the common DPTF ACPI code. For cannonlake this indicates the CPU device is called B0D4 and is at PCI address 00:04.0. Change-Id: I43c2f8dd7281d3e9f791ab01478ee7823fd6b128 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29759 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Add method for temp conversionDuncan Laurie
Add a method to convert from 1/10 Kelvin to Celsius. This is useful for EC devices where the sensor temperature are stored in Celsius instead of Kelvin. Change-Id: I6b1154f5ba13416131a029966d6d5c1598904881 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29758 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/intel/common/dptf: Make CPU address a defineDuncan Laurie
In order to support using the common ACPI code on more platforms than just Apollo Lake the DPTF code needs to be told what the PCI address is for the CPU thermal device. Change-Id: I638f2387330bbc42f64eb0fb676ee32c5df6572e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/29757 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-04soc/sifive/fu540: Load PLL settings from a structJonathan Neuschäfer
The different PLLs in the fu540 use the same register layout, so use one function (configure_pll) to program a PLL and wait for it to lock. This also makes it possible to dynamically calculate the PLL settings later. TEST=Boot until "Payload not loaded" on HiFive Unleashed Change-Id: I5c0cee886bad5758c70f967d2bb998c1e1a736ab Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29356 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apl: Enable graphics with libgfxinitNico Huber
Backlight control of internal panels likely won't work as configuration for that seems absent in coreboot. Also, libgfxinit doesn't support any MIPI/DSI connections, yet, and neither Gemini Lake. TEST=Booted work-in-progress port kontron/mal10 with VGA text and linear framebuffer modes. DP display came up. Change-Id: I7b111f1cdac4d18f2fc3089f57aebf3ad1739e5d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/intel/apollolake: Add support to print ME versionFurquan Shaikh
This change adds support to print ME version if UART_DEBUG is enabled. Check for UART_DEBUG is necessary because talking to ME to get the firmware version adds ~0.6 seconds to boot time. TEST=Verified on octopus that ME version printed is correct. Change-Id: I41217371558da1af694a2705e005429155d62838 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/29989 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03soc/amd/stoneyridge: Use new ACPI MMIO functionsRichard Spiegel
Replace IO access to ACPI registers with the new MMIO access functions. BUG=b:118049037 TEST=Build and boot grunt. Test ACPI related functionality. Change-Id: I7544169bb21982fcf7b1c07ab7c19c6f5e65ad56 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03soc/amd/stoneyridge: Create MMIO offsets for ACPIRichard Spiegel
ACPI registers can be accessed through IO or through MMIO. However, the offset relationship is not one to one. Therefore, definitions with the correct offset for MMIO access are needed. BUG=b:118049037 TEST=Use Chrome OS IOTOOLS io_readxx and mem_readxx to find the correct relationship between ACPI IO and ACPI MMIO. Change-Id: Id20754c0fc0af35bc9eb1a4b40c62fbf9ed6304d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03soc/sifive/fu540: Simplify UART refclk calculationJonathan Neuschäfer
clock_get_coreclk_khz() already detects whether the PLL or the input clock (hfclk) is used. Tested on HiFive Unleashed. Change-Id: I264977b0de0b81ef74a014984b6d33638ab33f4b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/29334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03soc/intel/cannonlake: Load FSP teardown optionallyLijian Zhao
Make build still pass in case of no FsptUpd.h available. BUG=N/A TEST=Delete FsptUpd.h and build pass wihtout FSP_CAR set. Change-Id: I3936d3deb8b079bd4db11e444f6bb7f9605520dc Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/29907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-03soc/amd/stoneyridge: Create MMIO ACPI access functionsRichard Spiegel
Now that the relationship between IO access and MMIO access has been established, create read/write functions to access ACPI standard registers through MMIO. BUG=b:118049037 TEST=Build grunt Change-Id: I32c26f342885c0d99b082be98730edcf16ab5dfc Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/29295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-12-03soc/intel/apl: Configure LPC serial IRQ modeNico Huber
Sync the FSP settings with what coreboot does. Why both FSP and coreboot configure this redundantly stays a secret. TEST=Set SERIRQ_CONTINUOUS on kontron/mal10. A CPLD connected to LPC works correctly now, but was confused by the wrong settings before because the FSP defaults allowed to disable the LPC clock. Change-Id: Id1c7180f460678bf0f9458228591050dd628c052 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/fsp_baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I01e4397b9a1c15eff4b856cbc697fa2b4bc9761f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/denverton_ns: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: If482c64e7133cc6d82472d121ac138fc1b60a183 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-30soc/intel/common: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Id64f9857bbd7db520c94de949db8f823f71d6dae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/broadwell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Automatically generate \PPKG in SSDT. Change-Id: I79d2eed9b89b420554ce10d1fc0f151b1872afe2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-30soc/intel/braswell: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I93c11e89da34c5432c6ce0415998b47bad339763 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29889 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/baytrail: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: Ifb5a5c1255f9a922063293bf430e849909468eaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29888 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30soc/intel/skylake: Rework acpi/cpu.aslArthur Heymans
Use acpigen_write_processor_cnot to implement notifications to the CPU. Change-Id: I182585fd09e4ce848c860d00eb612e8f5fdde35e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29884 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-30sdm845: Add clock supportDavid Dai
This sets up initial clock configuration for QUP and QSPI, and includes configuration of Root Clock Generators(RCG) and clock branches enablement. TEST=build & run Change-Id: I0b1d7f6daa179c0b24a97d42b66c1a9ee596b0a3 Signed-off-by: David Dai <daidavid1@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/25454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-30broadcom: Remove SoC and board supportPhilipp Deppenwiese
The reason for this code cleanup is the legacy Google Purin board which isn't available anymore and AFAIK never made it into the stores. * Remove broadcom cygnus SoC support * Remove /util/broadcom tool * Remove Google Purin mainboard * Remove MAINTAINERS entries Change-Id: I148dd7eb0192d396cb69bc26c4062f88a764771a Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29905 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-29mediatek/mt8183: Add DDR driver of rx dqs gating calibration partHuayang Duan
BUG=b:80501386 BRANCH=none TEST=Boots correctly on Kukui, and inits DRAM successfully with related patches. Change-Id: I504d6d5c9ea01b11a9f2a05b5ee4b5f1af87e23f Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/28841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: You-Cheng Syu <youcheng@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-11-29{mb/cubieboard,soc/intel/quark}: Remove define __SIMPLE_DEVICE__Elyes HAOUAS
Remove the __SIMPLE_DEVICE__ define from files used only in romstage. This is not required since romstage always defines __SIMPLE_DEVICE__. Change-Id: I8db1b15c9186536c9b8a6b5d667fa5a11af1bad2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29821 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 02:57:27 +0000