summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2018-05-01sdm845: Add Timer supportT Michael Turney
Frequency set to 19.2 MHz TEST=build Change-Id: I56e57156df8a74cf629f7ada86cf5a5fcd5ad3c4 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-05-01chromeec platforms: Update ACPI thermal event handler callMartin Roth
Currently the thermal event handler method TEVT is defined as an extern, then defined again in platforms with thermal event handling. In newer versions of IASL, this generates an error, as the method is defined in two places. Simply removing the extern causes the call to it to fail on platforms where it isn't actually defined, so add a preprocessor define where it's implemented, and only call the method on those platforms. Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-30soc/intel/braswell: remove stale spi_loading.cAaron Durbin
CONFIG_ALT_CBFS_LOAD_PAYLOAD has long since been removed. Clean up the remnants in braswell. Change-Id: I88483a4c3a74ed0c7defacf872b1564c3ce7f909 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-30soc/amd/stoneyridge/gpio.c: Fix gpio_output()Richard Spiegel
Function gpio_output() is only setting the pin as an output, when in fact it should also set the state (high/low) of the pin. Fix the procedure to set the state of the pin. BUG=b:78328773 TEST=None Change-Id: I516192a0782a9bbb40124029f264a2711114c800 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-30mb/google/octopus: Fix crossystem wpsw_cur errorHannah Williams
With only one entry for Write Protect gpio in the OIPG package, the sysfs entry /sys/devices/platform/chromeos_acpi/GPIO.x is created as "GPIO" instead of "GPIO.x". This was causing crossytem to return error for wpsw_cur. BUG=b:78009842 Change-Id: Ica60f342420d95d09a45580f2f940443c03601de Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-27soc/intel/apollolake: enable cache-as-ram paging for glkAaron Durbin
Add support and enalbe cache-as-ram paging for glk to work around a cache-as-ram corruption issue. glk executes verstage, romstage, and FSP-M directly out of cache-as-ram (just like apl). However, the front end on glk is very agressive about pulling cache lines into L1I for potential execution. When the snoops hit in the L1D and the cache lines are dirty the processor writes the line back. However, there is no backing store for the dirty lines to go. As such when the line is pulled back in the value is all 0xff's, corrupting cache-as-ram. To fix the issue one needs to enable paging with NX (no execute) permissions which prevents the above actions from happening because the TLB will indicate that shouldn't be fetched into the instruction cache since data will be marked no execute. The generated page tables are added to cbfs and only added to the COREBOOT cbfs as they are only consumed in the early cache-as-ram stages. The page tables generated with: $ go run util/x86/x86_page_tables.go \ --iomap_file=src/soc/intel/apollolake/glk_page_map.txt \ --metadata_base_address=0xfef00000 \ --pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \ --pt_output_c_file=src/soc/intel/apollolake/pt.c Merged address space: 00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small 00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small 00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small 00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small 00000000ff000000 -- 0000000100000000 WP : 8 big 0 small Total Pages of page tables: 5 Pages linked using base address of 0xfef00000. BUG=b:72728953 Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-27soc/amd/stoneyridge/include/soc/smi.h: Fix name collisionRichard Spiegel
When smi.h is included to southbridge.h (to use SCI/SMI definitions within southbridge.h definitions), this causes a collision of the definition of NONE (ioapic.h also has a NONE definition). As NONE is an enumeration of interrupt types (SCI/SMI), add INTERRUPT_ at the start of each definition. This is preparation to have GPIO table/code also declare/program SCI/SMI. BUG=b:72875858 TEST=Build grunt. Change-Id: I5c7b798f9f4d7c2a9f9c606c7ebffb7004a37b99 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25845 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27soc/amd/stoneyridge: Enable CMOS VBNV backup to flashMarc Jones
Now that we have SPI flash writes working, we can support VBOOT_VBNV_CMOS_BACKUP_TO_FLASH. This requires the mainboard to reserve the area in FMAP. BUG=b:77347873 TEST=Manually clear CMOS and check coreboot restores VBNV from flash. Change-Id: I488dbfc4c200f5100374d47feb0a0522e6a60e88 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25842 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-27soc/intel/common/block/xdci: Use vboot_can_enable_udc in xdci_can_enableFurquan Shaikh
This change uses the newly added vboot_can_enable_udc to decide if it is okay to enable xDCI in vboot developer mode. BUG=b:78577893 BRANCH=poppy Change-Id: Ia83b91ce17eec782faf5bb318ad8c00c09e2db05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-26soc/amd/common/block/include/amdblocks/psp.h: Replace todo messageRichard Spiegel
It was decided to not add the buffers definitions, so the todo message is obsolete. Replace it with minimum instructions about when a new buffer will be needed. It was also noticed a typo in one command. MBOX_BIOS_CMD_C3_DATA_INFO is about S3 transition, so it should be called MBOX_BIOS_CMD_S3_DATA_INFO. BUG=b:77940747 TEST=None. Change-Id: I6143d7e85476061395962b95ad8864ac32a1d4a3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25740 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26src: Fix a typo on "mtrr"Elyes HAOUAS
Change "mttrs" to mtrrs. Change-Id: I4e5930cdcba5e8f5366bb2d4ebbcb659c0c2eb27 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/25823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-26soc/intel/apollolake: enable exception handling in every stage for glkAaron Durbin
Now that an idt is available in every stage utilize it for exception processing to help catch and debug issues. BUG=b:72728953 Change-Id: I69e7f938f36f2e522b787e311fd148bb8fd41247 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25764 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-26src/sifive: Add the SiFive Freedom Unleashed 540 SoCJonathan Neuschäfer
The FU540 is the first RISC-V SoC with the necessary resources to run Linux (an external memory interface, MMU, etc). More information is available on SiFive's website: https://www.sifive.com/products/hifive-unleashed/ Change-Id: Ic2a3c7b1dfa56b67cc0571969cc9cf67a770ae43 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-26soc/amd/stoneyridge: Fix smi_write32 arg order in disable_all_smi_statusDaniel Kurtz
The argument order for smi_write32() is offset, value. Current code had it backwards. So, when disable_all_smi_status() was called by sb_slp_typ_handler(), instead of clearing pending flag SlpTypeEvent65 (0x2) in SMIx88 SmiStatus2 by writing 0x00000002 to 0xfed80288, it would instead write 0x00000088 to 0xfed80202 - clearing the lower 2 bytes of SMIx04 Event_Enable, which disabled the lower 16 GPEs from waking the system from S3. Thus, the EC events (Keyboard / lid switch) [GPE15] and touchpad [GPE7] did not work as wake up sources. BUG=b:78461678 TEST=powerd_dbus_suspend, tapping any key on keyboard wakes from S3. Change-Id: Ie4fbe6db1bb73f603dcf409117fcce93479a1f46 Fixes:081851a9e4 ("amd/stoneyridge: Add SlpTyp SMI handler") Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-26soc/amd/stoneyridge: Static constify smi_sourcesDaniel Kurtz
smi_sources is a file local array of constants. Change-Id: I431f181449a591ccaf8395f01a84c8e006a29b52 Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-on: https://review.coreboot.org/25814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-25soc/intel/apollake: add support for tracking memory detailsAaron Durbin
It's going to be necessary to know the i/o hole size as well the amount of memory configured in the sytsem. Therefore, add two helper functions: memory_in_system_in_mib() iohole_in_mib() Both return values in units of MiB. BUG=b:72728953 Change-Id: I481ba517c37f769e76d9e12b3631f5f99b5427a9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25738 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-25soc/intel/common: disable paging if PAGING_IN_CACHE_AS_RAM enabledAaron Durbin
When tearing down cache-as-ram disable paging if PAGING_IN_CACHE_AS_RAM is enabled. BUG=b:72728953 Change-Id: I86e8a57a1187876dcbedce9f4f6b05be30aea7c6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-25soc/amd/stoneyridge: Add additional early LPC and SPI initMarc Jones
Additional LPC and SPI setup needed to move AGESA out of the bootblock. Setup the prefetch, sio decode, and a bugfix for SPI. BUG=b:70558952 TEST=Boots with AGESA moved out of bootblock. Change-Id: I2c0d8632b25c036ff977c21477feb4778575189c Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/25755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-25soc/intel/apollolake: Sync FSP PCIE NPK device as per devicetreeShaunak Saha
This patch makes our devicetree in sync with the FSP configuration. Without this we see in boot logs "PCI: 00:00.2 not found, disabling it". The reason being in FSP NPK device is disabled by default. We can enable it by enabling the UPD parameter TraceHubEn. If we enable it in FSP then the logs complain the NPK pcie device is not seen. BUG=b:76115112 TEST=Build for Octopus and check that the logs do not report "PCI: 00:00.2 not found, disabling it". Change-Id: I8fe3a36dac2eff2225dacb0e6e16500a5750261e Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-24soc/amd/common/block/pi/amd_late_init.c: Fix illegal memory accessRichard Spiegel
Found-by: Coverity (CID 1387031: Memory - illegal accesses (BUFFER_SIZE_WARNING)). Calling strncpy with a maximum size argument of 19 bytes on destination array "dimm->module_part_number" of size 19 bytes might leave the destination string unterminated. Fix the size parameter. BUG=b:76202696 TEST=Build and boot kahlee, using special debug code to see the output strings, which was later removed. Change-Id: I18fa5e9c73401575441b6810f1db80d11666368c Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-24compiler.h: add __weak macroAaron Durbin
Instead of writing out '__attribute__((weak))' use a shorter form. Change-Id: If418a1d55052780077febd2d8f2089021f414b91 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23drivers/spi: reduce confusion in the APIAaron Durbin
Julius brought up confusion about the current spi api in [1]. In order alleviate the confusion stemming from supporting x86 spi flash controllers: - Remove spi_xfer_two_vectors() which was fusing transactions to accomodate the limitations of the spi controllers themselves. - Add spi_flash_vector_helper() for the x86 spi flash controllers to utilize in validating driver/controller current assumptions. - Remove the xfer() callback in the x86 spi flash drivers which will trigger an error as these controllers can't support the api. [1] https://mail.coreboot.org/pipermail/coreboot/2018-April/086561.html Change-Id: Id88adc6ad5234c29a739d43521c5f344bb7d3217 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-04-23cpu/x86: move NXE and PAT accesses to paging moduleAaron Durbin
The EFER and PAT MSRs are x86 architecturally defined. Therefore, move the macro defintions to msr.h. Add 'paging' prefix to the PAT and NXE pae/paging functions to namespace things a little better. BUG=b:72728953 Change-Id: I1ab2c4ff827e19d5ba4e3b6eaedb3fee6aaef14d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-23soc{broadcom,imgtec,mediatek,qualcomm}: stop using spi_xfer_two_vectorsAaron Durbin
On a second look broadcom/cygnus and imgtec/pistachio appear to support full duplex. Therefore, remove the use of spi_xfer_two_vectors(). For mediatek/mt8173 and qualcomm/ipq40xx, the driver is written in such a way that it does not support full duplex. Remove the use of spi_xfer_two_vectors() and explicitly error out when a full duplex transaction is requested. Change-Id: I8689bc9bb2b27563d25e9f165487d38881c0b059 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25742 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20pci: Move inline PCI functions to pci_ops.hPatrick Rudolph
Move inline function where they belong to. Fixes compilation on non x86 platforms. Change-Id: Ia05391c43b8d501bd68df5654bcfb587f8786f71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20soc/amd/stoneyridge/include/soc/southbridge.c: Rename gpio structureRichard Spiegel
The GPIO definition structure has evolved to a point where it's no longer specific to stoneyridge, though probably still specific to AMD. Therefore, rename the GPIO declaration structure removing stoneyridge from it. BUG=b:72875858 TEST=Build kahlee, grunt, gardenia. Change-Id: Ib034d3f7840c36ee8f5c5384241d7326d3fe5543 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25726 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-20soc/intel/common: Adjust LPC Generic IO setupLijian Zhao
Check same IO ranges get programmed first, if so just skip it to avoid double programming. BUG=b:77944335 TEST=Boot up with mewoth board, and check serial log, there's no error message about "LPC: Cannot Open IO Window: ". Change-Id: I89f9bb70320f91b16c6084384c4a0a53ede3760c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25667 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-19soc/amd/common/block/pi/heapmanager.c: Simplify codeRichard Spiegel
There are sections of code that are almost identical and they can be converted to auxiliary procedures. For allocating heap, 3 sizes (the buffer size of currently being examined node, the buffer size of the current best fit node and the minimum size for a buffer that will need to be split if selected as the best fit) are used often so they could be stored in temporary variables. These 2 changes will make code shorter, with less indentation problems and overall easier to read. The actual logic of the code is not changed. BUG=b:77940747 TEST=Build and boot grunt. Change-Id: Ib4c69981eab7452228ccae9ed9bc288c8baceffe Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25703 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-19soc/intel/cannonlake: Set DISB after Dram initLijian Zhao
DRAM Initialization Scratchpad Bit needs to be set after Dram Initialization finished, according to Cannonlake PCH-LP EDS(#565870) chapter 5.3.1. BUG=None Change-Id: I16dd3787cb743bc5b7492042f3c3757534e1a51c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kin Wai Ng <kin.wai.ng@intel.com>
2018-04-19soc/intel/apollolake: fix 'DENSITY' misspellingAaron Durbin
DESNITY is not DENSITY. Fix that error. BUG=b:72728953 Change-Id: I1e4ebec378a20cefc7c1e4114d39b707fc767fc1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25735 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-19soc/intel/cannonlake: Force LPC IO decode settingsLijian Zhao
Force PCH LPC generic IO ranges are identical between PCH LPC pci config space and DMI PCR registers. Reference documentation from 570374 chapter 2.4.1. Bug=77944335 TEST=Boot up in OS in meowth board, using iotools to read LPC pci config space offset 0x84~0x90 and compare with values read from DMI PCR private register offset 0x2730~0x273c are identical. Change-Id: I72a40360ba67f443f24468f10504d8cfd0b099ca Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25668 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-18soc/amd/stoneyridge/include/soc/gpio.h: Remove vendor code referenceRichard Spiegel
With the exception of code that deals directly or indirectly with AGESA, all other code should be independent of vendor code reference. Therefore, remove vendor code reference from any GPIO code. BUG=b:77999987 TEST=Build and boot grunt. Change-Id: I9ba78767a269ad6b9b06fa11993d8a12350e4bad Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25695 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Garrett Kirkendall <garrett.kirkendall@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17soc/intel/apollolake: Implement _PS0/_PS3 methods for PCIe root portsVenkateswarlu Vinjamuri
Creates a common asl include file for PCIe power state methods. This allows ports to be enabled independently. BUG=None BRANCH=None TEST=None Change-Id: I7b1cf4e14ebdfe9ecc7131dfe47c70ed7e2c3dc5 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/25532 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-17soc/intel/apollolake: Configure PCIe root port #3 for GLK WiFiVenkateswarlu Vinjamuri
GLK Octopus uses PCIe root port #3 (PCIe ID 13.0) for discrete PCIe wifi card. BUG=None BRANCH=None TEST=Use Stone Peak discrete wifi card and test s0ix. Change-Id: I8a064c5d97e4765bd97ec560c89b207b574b1fa1 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/25638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-17soc/intel/apollolake: Configure PCIe root port #1 for APL WiFiVenkateswarlu Vinjamuri
APL uses PCIe root port 1 (PCIe ID 14.0) for discrete PCIe wifi card. BUG=None BRANCH=None TEST=Use Stone Peak discrete wifi card and test s0ix. Change-Id: Ia81722f4533916fe93009a73d86765e5de9dab08 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/25637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-17soc/intel/skylake: check DPTF_TSR0_ACTIVE_AC* in _ACx methodsFrank Wu
Because thermal table is not included the values of DPTF_TSR0_ACTIVE_AC5 and DPTF_TSR0_ACTIVE_AC6 from internal nami/vayne thermal team. Add conditional compilation in _ACx methods if DPTF_ENABLE_FAN_CONTROL is defined in the dptf.asl. BUG=b:72974136 BRANCH=poppy TEST=emerge-nami coreboot and booted on nami board. Change-Id: I3e36ce94f714ff13f8ccee65992d7a9c7e0bb5b2 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25614 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-16soc/amd/stoneyridge/northbridge.c: Fix bit definitionsRichard Spiegel
The latest public BKDG (3.6) releases some previously undefined (reserved) bits. Fix these definitions, including the header file where they are defined. BUG=b:77940747 TEST=Build and boot grunt. Change-Id: Icb5334110248d7806421200a161fa3befefcea8a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25665 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-16soc/amd/stoneyridge/lpc.c: Fix bit definitionsRichard Spiegel
The latest public BKDG (3.6) releases some previously undefined (reserved) bits, also some bits were wrongly named (possibly copied from previous chip). Fix these definitions, including the header file where they are defined. BUG=b:77940747 TEST=Build and boot grunt. Change-Id: Ie8d3fcccb8443c1a6db828bdc2624778bad6ba9f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-04-16soc/intel/skylake: Hook up libgfxinitNico Huber
Also base the FSP/GOP related bail-out on the correct Kconfig option to allow adding a VBT along with libgfxinit. Most things should work, what doesn't is backlight control because coreboot misses the settings (moved to FSP and need backporting). Also, Kaby Lake is still unsupported. TEST=Booted yet to be upstreamed Skylake-S port (Kontron/bSL6) both with text and linear framebuffer mode and viewed a FILO menu. Change-Id: I79fbfed7732cf02d054530ea7ec0d34de32836ba Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-04-16intel/fsp_broadwell_de: Set FSP serial speed to match coreboot'sDavid Hendricks
This makes FSP use the same baud rate as coreboot so that the user can more easily change it without having to modify the FSP binary. Change-Id: I0084aa9a0394ad7eabdd88809b66fc21a25ba316 Signed-off-by: David Hendricks <dhendricks@fb.com> Reviewed-on: https://review.coreboot.org/25666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-04-16soc/intel/apollolake: Fix CPU address bitsHannah Williams
APL and GLK have 39 address bits Change-Id: I9b761492332c545c13a0594d8f5937ca84bc0699 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-16soc/intel/apollolake: update cache options for glkAaron Durbin
On glk there's a 4MiB L2 cache all the time. Take advantage of that by initializing a 1MiB cache-as-ram area. BUG=b:72728953 Change-Id: Ia4e777a13607d8b70c05534b0a172f0ec6b04c51 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25645 Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-16intel/fsp_broadwell_de: Remove buggy code for SMBus clock gatingWerner Zeh
The pch_smbus_init() function contains code to enable clock gating for the SMBus controller. Unfortunately this code is buggy and leads to a hanging system with the latest microcode version. The hang occurs as follows: The clock gate register is mapped into RCBA space. After reading the RCBA address from the LPC device config space no mask is applied to the value (only bits 31..14 are valid while bit 0 is the enable bit). For this reason the final address is off by one. The old microcodes at least allowed this unaligned access to the RCBA space. With the latest microcode this access leads to CPU hang. Once this is fixed the next issue occurs: After setting the clock gating bit for SMBus (bit 5) the SMBus controller disappears from the PCI bus completely and hence no usage of it is possible anymore. To fix this issue the clock gating code is completely removed as it was intentionally meant to enable clock gating on the SMB_CLK line and not the clock gating on the PCIe interface of the SMBus controller. This issue is known already and was discussed on the mailinglist: [coreboot] BDX-DE PCI init fail https://mail.coreboot.org/pipermail/coreboot/2018-January/085908.html TEST=Boot mc_bdx1 with microcode version M1050663_07000012. Change-Id: Icb86f4516f8a6e72552a44618737e682b0fdef33 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/25652 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-13soc/amd/stoneyridge: add a romstage hook for mainboardsMartin Roth
There wasn't previously a way for Stoney platforms to run mainboard specific code in romstage. This adds an early call for configuration and passes along whether the system is currently resuming from S3. BUG=b:77921345 TEST=Build, verify that weak function implementation gets called. Change-Id: Id94855e1084814ec37956e603cd093d70f01a559 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-12include/memory_info.h: Change serial number field from 5 bytes to 4Raul E Rangel
dimm_info.serial had a strange contract. The SPD spec defines a 4 byte serial number. dimm_info.serial required a 4 character ascii string with a null terminator. This change makes the serial field so it matches the SPD spec. smbios.c will then translate the byte array into hex and set it on the smbios table. There were only two callers that set the serial number: * haswell/raminit.c: already does a memcpy(serial, spd->serial, 4), so it already matches the new contract. * amd_late_init.c: Previously copied the last 4 characters. Requires decoding the serial number into a byte array. google/cyan/spd/spd.c: This could be updated to pass the serial number, but it uses a hard coded spd.bin. Testing this on grunt, dmidecode now shows the full serial number: Serial Number: 00000000 BUG=b:65403853 TEST=tested on grunt Change-Id: Ifc58ad9ea4cdd2abe06a170a39b1f32680e7b299 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11soc/amd: Fix generating SMBIOS Type 17Raul E Rangel
The converter was setting SMBIOS values when dimm_info expects SPD values. dmidecode now shows the following: Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 8192 MB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 933 MT/s Manufacturer: Hynix/Hyundai Serial Number: 00000000 Asset Tag: Not Specified Part Number: HMAA51S6AMR6N-UH Rank: 1 Configured Clock Speed: 933 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Example debug output: AGESA TYPE 17 DMI INFO: Handle: 1 TotalWidth: 64 DataWidth: 64 MemorySize: 8192 DeviceSet: 0 Speed: 1200 ManufacturerIdCode: 44416 Attributes: 1 ExtSize: 0 ConfigSpeed: 933 MemoryType: 0x1a FormFactor: 0xd DeviceLocator: DIMM 0 BankLocator: CHANNEL A SerialNumber(8): ' 00000000' PartNumber(20): 'HMAA51S6AMR6N-UH ' CBMEM_ID_MEMINFO: dimm_size: 8192 ddr_type: 0x1a ddr_frequency: 933 rank_per_dimm: 1 channel_num: 0 dimm_num: 0 bank_locator: 0 mod_id: 44416 mod_type: 0x4 bus_width: 3 serial: 0x00000000 module_part_number(18): 'HMAA51S6AMR6N-UH ' The serial number we get from AGESA (at least on my board) is always 00000000. I'm assuming this is because the SPD info is compiled in. `mosys memory spd print all` is still failing though. I will look into that next. BUG=b:65403853 BRANCH=dimm-info TEST=Test output above Change-Id: I076bc3f965f81a9374c8976da48c7fdce014dc0c Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/25304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11src/amd/stoneyridge: Fix a typo (EDGEL_TRIG -> EDGE_TRIG)Jonathan Neuschäfer
Fixes: 2269a3c328 ("soc/amd/stoneyridge: Add functions for GPIO interrupts") Change-Id: I5730259bc6819defc482d31644e1f476679257b2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25588 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Chris Ching <chingcodes@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-11amd/stoneyridge: Reorder temp mtrr for flashMarshall Dawson
Relocate setting the temp range MTRR, for the SPI flash device, to after completion of mp_init. The mp_init functionality mirrors the BSP's exact MTRR settings into the AP cores. The ranges need to be the correct calculated values and not some temporary setting. This solves an MTRR sync issue on APUs with more than two cores, i.e. more than a single compute-unit. MTRRs within a CU are shared so the AP always stays in sync. BUG=b:77457944 TEST=run on Kahlee Change-Id: Idc4cccdf721e252bc87d6cba62a3406a9f19b940 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11soc/intel/common/block/cpu: Fix cpu_get_power_maxMario Scheithauer
To avoid rounding errors with the current data types, the formula in this function must be converted. Change-Id: I75d05165fd9e5a0992330df00f8665a05d2daeb3 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-11soc/intel/common/block/gspi: Set Clock Update Bit for clock updates.Shamile Khan
This is required for clock parameter settings to take effect. BUG=b:75306520 BRANCH=None TEST=On Octopus, used a scope to check that spi_clk fed to tpm is 1 MHz Change-Id: Icdb617aa4aa944d46b3a56dab88d2008b01dea0d Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-14 01:25:34 +0000