coreboot - Some coreboot project code with my work

Age	Commit message (Expand)	Author
2015-04-10	tegra132: Set dc to resize the difference between framebuffer and panel	Jimmy Zhang
2015-04-10	tegra132: Add framebuffer parameters	Jimmy Zhang
2015-04-10	tegra132: Pass panel spec to lib_sysinfo	Jimmy Zhang
2015-04-10	tegra132: Expand ramstage size to 208k (from 192k)	Jimmy Zhang
2015-04-10	tegra132: Add dsi driver	Jimmy Zhang
2015-04-10	tegra132: Add panel mode spec	Jimmy Zhang
2015-04-10	google/rush_ryu: dsi: Enable panel related vdd and clocks	Jimmy Zhang
2015-04-10	tegra132: Increase space for romstage in memlayout	Furquan Shaikh
2015-04-10	baytrail: correct NC pin to GPO pin according to BYT platform design guide	Kane Chen
2015-04-10	broadwell: Correct XHCI offset for USB 3.0 ports	Julius Werner
2015-04-10	broadwell: Set PCIe replay timeout to 0xD	Duncan Laurie
2015-04-10	baytrail: add code for supporting 2x ddr refresh rate	Kane Chen
2015-04-10	broadwell: Add configuration for tuning VR for C-state operations	Duncan Laurie
2015-04-10	broadwell: Preserve VbNv around cmos_init	Duncan Laurie
2015-04-10	broadwell: Add function to apply PRR to a range of SPI flash	Duncan Laurie
2015-04-10	broadwell: Turn off panel backlight in S5 SMI handler	Duncan Laurie
2015-04-10	broadwell: Skip steps when disabling PCIe port	Duncan Laurie
2015-04-10	broadwell: Remove XHCI workarounds on WPT	Duncan Laurie
2015-04-10	broadwell: Only do pre-graphics delay when running option rom	Duncan Laurie
2015-04-10	broadwell: Fix PCIe ports programming sequences to enable HSIOPC	Wenkai Du
2015-04-10	broadwell: Update SATA Gen3 TX adjustment registers	Duncan Laurie
2015-04-10	broadwell: Add a few bits to finalize step	Duncan Laurie
2015-04-10	baytrail: fix the coding error on PCIe L1 exit latency	Kevin L Lee
2015-04-10	Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 ms	Kevin Hsieh
2015-04-10	Broadwell: Set boot_mode of pei_data before running reference code	Kenji Chen
2015-04-10	broadwell: Increase I2C SDA hold timing to 300ns	Chiranjeevi Rapolu
2015-04-10	broadwell: add RCBA posting read after writing	Wenkai Du
2015-04-10	Broadwell: Synchronization with FRC for Root Port Power Management	Kenji Chen
2015-04-10	broadwell: Skip DDI-A enable in S3 resume	Duncan Laurie
2015-04-10	broadwell: Add support for ACPI \_GPE._SWS	Duncan Laurie
2015-04-10	baytrail: Switch from ACPI mode to PCI mode for legacy support	Marc Jones
2015-04-10	vboot: move vboot files to designated directory	Daisuke Nojiri
2015-04-10	ipq806x: Remove extra INCLUDES	Patrick Georgi
2015-04-10	google/rush: Add I2C1 init and audio clock enable/resets	Tom Warren
2015-04-10	tegra132: Add routine to enable all audio periphs under AHUB	Tom Warren
2015-04-10	tegra132: Add I2C1 support to funit	Tom Warren
2015-04-10	arm64: Implement PSCI command support	Aaron Durbin
2015-04-10	arm64: secmon: add entry point for turned on CPUs	Aaron Durbin
2015-04-10	ryu: Add display_start api	Jimmy Zhang
2015-04-10	marvell/bg4cd: add gpio.h to fix broken build	Daisuke Nojiri
2015-04-10	rk3288: Adjust CBFS header and ROM offsets	Julius Werner
2015-04-10	rk3288: don't log LAST_TSHUT bit	huang lin
2015-04-10	rk3288: slowly raise to max cpu voltage to prevent overshoot	huang lin
2015-04-10	google/storm: Minor board ID changes	Dan Ehrenberg
2015-04-10	storm: Initialize clock, pinmux for NAND if present on board	Dan Ehrenberg
2015-04-10	gpio: Extend common GPIO header, simplify function names	Julius Werner
2015-04-10	bg4cd: set bootblock and verstage architecture to armv7-m	Daisuke Nojiri
2015-04-09	soc: Use DEVICE_NOOP macro formalism over static stub func	Edward O'Callaghan
2015-04-09	bg4cd: drop init_timer() stub	Patrick Georgi
2015-04-09	bg4cd: Change all SoC headers to <soc/headername.h> system	Julius Werner